MB pro and Mountain lion issues
I have a late 2008 MB pro 15 in and since DL osx mountain lion, my MB pro now randomly locks up, the wifi looses connectivity, safari freezes, safar wont finish opening the page, etc What is up with mountain lion????? When the computer freezes I have to hold down the pwr button to reboot....
In 4 years i never had an issues prior to mountain lion.
I recently upgraded my mid-2009 MB Pro 17 inch to Mountain Lion. After the upgrade I can open Dashboard but cannot access the widgets or delete unwanted widgets. In Launch Pad my grouped applications will not expand when I click on the grouping. I have reloaded Mountain Lion but the problem still exists. I also upgraded my mid-2007 iMac but everything works fine on it. What gives? I have since stopped using Dashboard and Launch Pad. More backward steps from the folks at Apple.
Similar Messages
-
Acrobat 9 fails to recognize (scanner) Epson Artisan 730 after Mac Pro and Mountain Lion Upgrade
I had no problems scanning from the Epson Artisan 730 all in one until I upgraded my Powermac G5 to a mid-2010 Mac Pro with Mountain Lion 10.8. The printer is installed with most recent drivers from Epson (the install disk will not work on 10.8 anyway). I can scan directly from the Print and Scan system preference under the scan tab of the printer and it prints fine from Acrobat. When I go to Document -> Scan to PDF, it brings up a dialog box in which the first input is box is Scanner: "Please select a device" with up and down arrows on the right. When I click on the up and down arrows, there are no selection options other that "Please select a device" with a check mark next to it. This printer is wireless, as is another Canon which also has a scanner and neither appear as available. Very frustrating. I have repeated the instalation process (for the Epson downloaded driver utilities) and it just is not seen.
If anyone has any workarounds or solutions, I would be grateful.1strail wrote:
Of course now I have a red badge on the App Store that is asking me to update the Epson driver. I wonder if that will blow out the TWAIN driver. It's epson14333.dmg.
No. Your TWAIN drivers are separate than the Image Capture Device drivers that would be installed by the printer driver update.
Also, no way of getting rid of the badge notification in system preferences. App store is not listed.
There is no law that you must update software just because it is available. There is no way to get rid of the red badge, but you don't have to do the upgrade. -
Drivers for hp8600 pro and mountain lion
I have iMac with Mountain Lion and just purchased HP8600 Pro printer. Tried to load the disc for drivers and told me that it is not supported. Please help...
Yesterday I received a message that an update was needed for Java and Adobe Flash. Java updated just fine but when I tried to install the Flash update I kept getting an error message. I did a permissions repair and tried to restart the computer but then the computer would only come up into recovery mode.
In recovery mode I ran another permissions repair and a disk verify. The disk verify showed a couple problems with my SSD but it also repaired them. I tried to cut and paste the error messages but there is no way to do that in recovery mode - I wish now I had written them down. I remember one mentioned an anode but it was weird because it was referencing a movie file I created with HandBrake that I KNOW was no longer on my computer. Even then I could only boot into recovery mode.
I recovered to a backup from earlier in the day, but still could only boot to recovery mode. I then recovered to a backup from earlier in the week, but still could only boot to recovery mode.
So finally today I did a clean install of 10.8 and updated all the way to 10.8.5. DiskWarrior reported the SMART status of my SSD was fine. I was able to find on Apple's servers, and install, the HP print and scan driver for my OfficeJet L7650.
I don't know what all was going on with the computer that required a fresh install - and I am annoyed because I was planning a fresh install with Mavericks and now I'll have to do it again - but my HP printing/scanning problem is fixed. -
HT204032 I have a mac book pro, and mountain lion software. How can i get power nap?
h
Macs that use Power Nap
The MacBook Air (Late 2010, Mid 2011, Mid 2012) and MacBook Pro (Retina, Mid 2012) running Mountain Lion can use Power Nap.
http://support.apple.com/kb/HT5394 -
Slow response on mac book pro and mountain lion
Over the past few months I have noticed that my MAC Book Pro is starting to act like a Windows machine. Freezing, slow response, Applications not responding, etc.
I have tried the typical HW reset, removing cache, added anti virus etc but if anything seems to be worse. Any suggestions?
4Gb RAM, 750G drive 170G used. Typically use Office 11 Powerpoint, Excel, Word, Outlook, Safari, Jabber, Chrome, WebEx.Two other things you can try:
PRAM reset: http://support.apple.com/kb/PH11243
SMC reset: http://support.apple.com/kb/HT3964 -
Why can't I update the computer clock? I'm using a Mac Pro and Mountain Lion 10.8.2
I am unable to update the computer clock. Tried Sys Preferences--just get the spinning basketball.?
Select ▹ System Preferences ▹ Language & Text ▹ Region ▹ Region: your country. Test.
-
Apps store icon no longer available, book shelf will no longer access the store, and my mac pro will not sinc apps with my iPad. What's up?? How do I correct? This is after upgrading to iOS6 and Mountain Lion.
Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
Cheers, Tom -
I updated my MacBook Pro with Mountain Lion and now it is slow in starting up and loads a number of probrams. How can I fix the problem?
Have you tried starting in Safe Mode and see if the slowness still occurs?
Restart holding the "shift" key.
(Expect it to take longer to start this way because it runs a directory check first.)
If this works look in System Preferences > Users & Groups > Login items and delete any third party login items (-), you can always add them back with the (+). Also look in /Library/Startup Items. Nothing is put in that folder by default, so anything in there is yours.
Reboot normally and test. -
iPad IOS 7.0.2 and Mountain Lion 10.8.5 Calendar colors do not match between computer and device. Problem did not exist until updated IOS arrived. Colours change of their own free will despite being corrected on both iPAD and MacBook Pro. Any answers?
Please do not post the entire messages log as it takes up unnecessarily a lot of space. It seems that there is a corrupt/nonfunctional file called
[email protected]nt.plist
Go to your hard drive, enter library, go into users, and go into launch agents and delete the thing above. Empty the trash and restart. -
Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?
If you look at the User Tips tab, you will find a write up on just this subject:
https://discussions.apple.com/docs/DOC-4053
The subject of buying/selling a Mac is quite complicated. Here is a guide to the steps involved. It is from the Seller's point of view, but easily read the other way too:
SELLING A MAC A
Internet Recovery, and Transferability of OS & iLife Apps
Selling an Old Mac:
• When selling an old Mac, the only OS that is legally transferable is the one that came preinstalled when the Mac was new. Selling a Mac with an upgraded OS isn't doing the new owner any favors. Attempting to do so will only result in headaches since the upgraded OS can't be registered by the new owner. If a clean install becomes necessary, they won't be able to do so and will be forced to install the original OS via Internet Recovery. Best to simply erase the drive and revert back to the original OS prior to selling any Mac.
• Additionally, upgrading the OS on a Mac you intend to sell means that you are leaving personally identifiable information on the Mac since the only way to upgrade the OS involves using your own AppleID to download the upgrade from the App Store. So there will be traces of your info and user account left behind. Again, best to erase the drive and revert to the original OS via Internet Recovery.
Internet Recovery:
• In the event that the OS has been upgraded to a newer version (i.e. Lion to Mountain Lion), Internet Recovery will offer the version of the OS that originally came with the Mac. So while booting to the Recovery Disk will show Mountain Lion as available for reinstall since that is the current version running, Internet Recovery, on the other hand, will only show Lion available since that was the OS shipped with that particular Mac.
• Though the Mac came with a particular version of Mac OS X, it appears that, when Internet Recovery is invoked, the most recent update of that version may be applied. (i.e. if the Mac originally came with 10.7.3, Internet Recovery may install a more recent update like 10.7.5)
iLife Apps:
• When the App Store is launched for the first time it will report that the iLife apps are available for the user to Accept under the Purchases section. The user will be required to enter their AppleID during the Acceptance process. From that point on the iLife apps will be tied to the AppleID used to Accept them. The user will be allowed to download the apps to other Macs they own if they wish using the same AppleID used to Accept them.
• Once Accepted on the new Mac, the iLife apps can not be transferred to any future owner when the Mac is sold. Attempting to use an AppleID after the apps have already been accepted using a different AppleID will result in the App Store reporting "These apps were already assigned to another Apple ID".
• It appears, however, that the iLife Apps do not automatically go to the first owner of the Mac. It's quite possible that the original owner, either by choice or neglect, never Accepted the iLife apps in the App Store. As a result, a future owner of the Mac may be able to successfully Accept the apps and retain them for themselves using their own AppleID. Bottom Line: Whoever Accepts the iLife apps first gets to keep them.
SELLING A MAC B
Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
B. Clone to an external drive using using Carbon Copy Cloner.
1. Open Carbon Copy Cloner.
2. Select the Source volume from the Select a source drop down menu on the left side.
3. Select the Destination volume from the Select a destination drop down menu on the right
side.
4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
sure to opt for that.
Destination means a freshly erased external backup drive. Source means the internal
startup drive.
Step Two - Prepare the machine for the new buyer:
1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
2, Remove any Open Firmware passwords or Firmware passwords.
3. Turn the brightness full up and volume nearly so.
4. Turn off File Vault, if enabled.
5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
Step Three - Install a fresh OS:
A. Snow Leopard and earlier versions of OS X
1. Insert the original OS X install CD/DVD that came with your computer.
2. Restart the computer while holding down the C key to boot from the CD/DVD.
3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
Optionally, click on the Security button and set the Zero Data option to one-pass.
4. Install OS X.
5. Upon completion DO NOT restart the computer.
6. Shutdown the computer.
B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
Note: You will need an active Internet connection. I suggest using Ethernet if possible because
it is three times faster than wireless.
1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
Utilities window appears.
2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
on the Erase tab in the DU main window.
4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
and set the Zero Data option to one-pass.
5. Click on the Erase button and wait until the process has completed.
6. Quit DU and return to the Mac OS X Utilities window.
7. Select Reinstall Lion/Mountain Lion and click on the Install button.
8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License. -
I hace a Macbook Pro running Mountain Lion OS.... I need to print from time to time but don't have a new printer to go with my new macbook. Would a 3115CN work with it or no? If so, how can I set it up? Setting up a printer on a mac is a bit different from doing so on a windows machine and I am new to the macworld.
All help would be greatly appreciated.Yes. I'm running this printer from 10.6 through 10.9 and it's worked fine with all versions. Dell released updated drivers a while ago that make it much easier to administer this printer.
-
My Macbook pro was stolen 09/12, the police just returned it to me. I want to remove all the data and start over. Format the drive's etc. I have windows 7 on 1 partion and mountain lion OSX on the apple partition. How is the best way to do this?
Have a look here...
what-to-do-when-your-hard-drive-is-full.html -
I tried to airdrop Civilization V from a Macbook Pro with Mountain Lion to a Macbook Pro with Lion and it doesn't work. Other apps have but Civ V has not.
Likely because it's a not self contained and/or it's game and copy protected, so install it via the developers instructions instead, which likely means it will have ot be uninstalled off the first machine, the developer contacted for a new license key before installing on the newer machine.
If you want it on both machines, you will need to likely buy another license.
Most developers are fine with transfering license between machines, you have to contact them.
They just want to make sure it's only on one machine so they are not getting robbed. -
Hi,
I purchased Huawei Dongle and trying to connect with my new MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support.
When I plugged in my macbook the power is flowing in dongle due green light blinking twice in every 3 sec but no connection found or diver shown.
Please let me know how I have to use it. I got some suggestion for USB hub 2.0 but It does not make any sense and driver installation.
So please suggest proper direction to use it and provide link to install any driver.
Thanks
Tauheed AhmadYes Clinton I did same, but they were (Huawei customer support) surprised about this problem, They behave like they have no idea about USB 2.0 and 3.0 knowledge. They handsUp that reason I posted my problem in this forum.
So is there any better solution to use any mediator between these USB version handling, Please let me know.
Thanks
Tauheed -
can't install from application install dvd and i can't update to 10.6.8 after i restore my macbook pro from mountain lion. when restart and i press command it still has recovery mountain lion show on my screen.
What model is the MBP? Did it come with OS 10.6 or a later OS? Is the install DVD one that came with it or something else?
You can't run an OS older than Mac on it.
But if came with 10.6 installed & you have the system discs, you should be able to erase the drive & reinstall the original OS.
Maybe you are looking for
-
My itouch has many songs that will not download to my new laptop
I purcased these songs an had them downloaded to old computer but that hard drive died. tried to upload these songs to mew computer-only about 150/350 downloaded. Th itunes library doesnt show these songs either-What to do?
-
My network uses proxy and port 8080.However when i enter 8080 in web proxy it automatically becomes 8,080 and i am unable to connect.Is there something that i am missing.
-
Workitem button is not comming in swel though the workflow gets triggered
Dear All, I have copied the std wf WS20000075 and doing customization for po release as per my clients requirement. Once PO is being created in ME21N i am able to see the event trace in SWEL , but its showing an error , " Import container contains er
-
Pre-fill the OLAP cache for a query on Data change event of infoprovider
Hi Gurus, I have to pre-fill the OLAP cache for a query,which has bad performance. I read a doc 'Periodic Jobs and Tasks in SAP BW' which suggested sum steps to do this i hav created the setting for Bex broadcasting for scheduling job Execution with
-
Getting error for classpath setting during compilation
Hi, I tried sampel code of SchematronValidation bpel sample code from oracle site.But while compiling the code,I am getting following error: Failed to compile bpel generated classes. failure to compile the generated BPEL classes for BPEL process "Sch