MB Restarts from sleep mode??

MB less than a year old has been restarting on it's own when being placed in sleep mode. This has happened when closing the lid, selecting sleep from the drop down box, and when letting the energy saving preferences put it to sleep.
Anyone have any suggestions?

Create a new user account and try the same actions. If it behaves normally, there's a problem in your main user account.
~Lyssa

Similar Messages

I mac keeps restarting from sleep mode

HI recently upgraded to mountion lion but from sleep mode computer starts up by itself usuly at night can anyone help ?

Try resetting the system management controller on the comptuer. See here for how to do this for your specific Mac model: http://support.apple.com/kb/ht3964

G4 odor upon restart from sleep mode

My G4 functions fine but has recently developed an odor, upon just awakening from the sleep mode. The odor then dissipates and all computer functions are fine. Can anyone tell me the cause of this disorder? It only happens when awakening from sleep mode and not upon start-up.
G4 Mac OS 9.2.x

Can you describe the odor?
Have you looked to see if something has crawled in and made a home. Your mac is warm even when off and some critters like the warmth.
After all, the term "bug in the computer" came from an actual insect that crawled into one of the old vaccuum tube computers and got fried.

Macbook pro will not restart from sleep

My MacBook Pro Intel fails to restart from sleep mode. The color beach ball just keeps spinning. The software is up to date and the computer is running Snow Leopard. Please help.

This article will explain how to do the SMC reset.
DALE

Apple TV needs Restart for Airplay especially after resuming from Sleep Mode

1. I always have to restart my Apple TV for Airplay when I resume it from Sleep Mode. Neither my MAC not my PC nor my iPhone/iPad can connect to Airplay if it's not retsarted. I did a complete Factory Reset of Apple TV thinking it would be the best way of troubleshooting but in vein. Any help/suggestion/tips from anybody please?
2. Also - Does Apple TV needs internet always for Airplay? I guess that should work on the LAN even if there is no internet connectivity, Correct?
Regards,

Hey loftysub,
I'd check out the following article, it should be able to help you out:
Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS4215
Cheers,
David

I occasionally have issues waking my macbook pro up from sleep mode and have to restart the computer. The apple store replaced the sleep part but the problem is still there

I occasionally have issues waking my macbook pro up from sleep mode resulting in my need to restart the computer. I dislike all of my programs opening at once when I do get the computer started becasue it slows the cpu down. The apple store replaced the sleep part but the problem is still there. Note: i never had this problem with snow leopard

I'm not certain but my new MBA 13...when in sleep mode comes back on from a black screen when I simply click on the left mouse button. Also, one time I did a SECURE EMPTY TRASH on files that totalled more than 1GB and it took so long that the fan kept increasing in speed so I pressed on the POWER button and the MBA shut...I was able to boot up with no problem. As a rule, I now only do secured erases for trash bin data totalling 500mb or less...anything above that gets a regular erase (dump).

My imac freezes , need to restart everytime i wake it from sleep mode. just started happening 2 weeks ago.

For about 2 weeks whenever I return to my imac and tap the mouse to wake it from sleep mode my screen is frozen. I have tried to wait for it to unfreeze but it doesnt wake. I cannot get any results from using the mouse or the keyboard. I always have to hard reset the computer to be able to use computer again. My mac is a year old. Anyone have any thoughts as to why tis is happening? Thanks

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged before the boot, while the system was unresponsive or was failing to shut down. Please include the BOOT_TIME message at the end of the log extract.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Satellite P200D-11R sound and graphics crash after waking up from sleep mode

Hi,
I am wondering if anyone here has had similar experiences to mine (below) or can offer any solutions.
I have upgraded my P200D-11R OS to Vista 64 Ultimate to take advantage of the extra performance. I also add that the BIOS has already been updated to version 1.4.
Well, everything works fine with the standard 2Gig of RAM which the laptop was supplied with originally, however, when I upgrade the RAM to 4Gig (2 x 2GB Samsung 667mHz modules), sound and graphics problems appear every time the machine is brought back from sleep mode.
The sound card makes a very laud fuzzy noise every time it wants to play a sound and the graphics produce lots of horizontal lines on the screen. I then just have to restart the machine which means loosing all my unsaved work.
Everything works fine as long as the machine does not enter sleep mode. I have currently disabled the sleep mode to prevent the machine from entering it but I am finding life very hard without it.
I am very surprised and also disappointed at the fact that Toshiba did not test these machines with Vista 64 Ultimate and 4Gig of RAM!
Extra info:
The memory is the same Samsung type as the 1Gig modules supplied by Toshiba originally with the machine, and the part number Toshiba recommends.
I have tried installing other (more recent) device drivers by Realtek and ATI without any improvements.
The memory modules pass all tests and are not defective. They have also been tested on my friends Dell notebook with no problems even in sleep mode.
I have installed my friends Dell 2Gig memory modules in my P200D and they too produce exactly the same results with post-sleep crashes.
My thoughts are that this must be another BIOS issue unless anyone can shed some light on the issue from another angle.
Please help! Many thanks in advance.

Hi Sascha
Since you are running a Vista 32bit version, the upper limit of the memory recocnised by the machine is 3.2gb which is the maximum a 32bit operating system can address and use. The diffrence here is that I also upgraded my OS to Vista Ultimate 64bit to get yet better performance out of the 64bit dual AMD processor.
3.2gb of RAM on 32bit OS does not necessarily increase the performance. However, it keeps the performance stable when you open many more programs at the same time since the machine has more RAM to play with before staring to use the much slower hard drive as operating memory (Page File), to keep all thoes open programs running.
A 64bit OS such as Vista Ultimate 64, recognises the whole 4gb of RAM and much more (for instance, 8gb with 2 x 4gb RAM modules). The 64bit OS itself would generally consume more RAM to start with, however, with 4gb I found the general performance to be much better. Going back to the problem however, my P200D-11R with Ultimate 64 and 4gb RAM refuses to wake up from sleep mode gracefully and the graphics and sound crash every time, forcing me to restart.
My feelings at present is that eventhough your machine may be slightly different, I bet if you upgrade your OS to 64bit, the machine will start recognising all of the 4gb of RAM and post-sleep crashes will start to appear!

I'm new to the MAC world. I turned my computer on from 'sleep' mode, and a window was up stating that the IOS disk was full; asked me to force quit, then it just froze. It's been 2 hours. Help! I'm worried about losing photos/videos of my children. Thx!

I'm new to the MAC world. I turned my computer on from 'sleep' mode, and a window was up stating that the IOS disk was full; asked me to force quit, then it just froze. It's been 2 hours. Help! I'm worried about losing photos/videos of my children. Im not sure if there's something special I need to do once I turn it back on; in the meantime, its still on... which I'm afraid the picture on the screen will burn into the screen. Does that happen on iMac's? Thx!

Try a hard reset. ( holding Power til it restarts)
Once to your desktop. Click the Apple icon >> About this mac >> More info>> Storage
Once you see what you have the most of. Try to see what you can delete.
Open up any folder>>all files>> or buy an external to store more data.
Once deleting make sure you empty your trash.
If you are new and its a new computer, you might need to bring it to a store for further assistence.
Coast Guard Mechanic w/ an Apple Problem

Hello. My mac pro early 2008 restarts after sleep mode and it works slower. I tested it with apple hardwear test and it seems to be ok. Thank you.

Hello. My mac pro early 2008 restarts after sleep mode and it works slower. I tested it with apple hardwear test and it seems to be ok. Thank you.

Try this:
clone your system and repair it with Disk Warrior instead
Or try a clean test system install on another drive
A must: SmcFanControl 2.2 - a mere 400 rpm extra to keep air cooling up
Try to run w/o externals. MyBook included.
Is that a 7200.11 1TB? they had a lot of issues.
Run AHT off your OEM DVD.
2008 had to have EFI and SMC updates to deal with freezes on wake from sleep, and like all models, high inrush current. Hopefully you have a UPS and is 1500VA unit.
When you do hard restart from power button, you almost certainly add more directory errors and to files requiring immediate attention to repair and rebuild the directory; and to scan and repair and delete cache and temp files and folders. A must. Invest in bootable backups SuperDuper along with Disk Warrior (or TechTool Pro 6, maybe Drive Genius 3 but I'd rate that #3).
TimeMachine has its own bad habits, especially with Green drives and some externals.
Try to rule out everything and then add back one at a time.
And it may just be time to replace the 8800, very common, a couple threads this week, and it is 3 yrs old. Might want ATI 5870 or 5770.

Since updating to Lion the iMac won't recognise the external hard drive (maxtor) when waking from sleep mode,

Hi All, Since updating to Lion, my imac won't recognise the ext HDD (Maxtor) when waking from sleep mode, I have tried another port, diisc utility (Ext HDD not listed in here) but nothing works. I now find that I have to restart the imac to get the drive recognised..which is fine until the imac goes into sleep mode then I lose the drive and have to restart etc etc.....anyone suffering same issue. The Ext Drive worked perfectly until the upgrade..

Thanks for this, and apologies for delay in replying...in between seeing your post I backed up the ext hdd to another mac and used the disc utility to erase and repair and then re mounted the ext hdd. OK. I have then tested the ext hdd being recognised when waking from sleep mode a few times and everything appears to be fine. If this doesn't work (long term) I will follow the instructions as you have suggested....
I now have a new problem with my HP printer (Photosmart Plus) which is not being recognised by a new wireless router..Ok whilst the router is switch on and I have reconfigured the printer..but when the router is switched off overnight and then switched back on...I get a 'printer is not connected' message and have to go through the re configure routine all over. I am minded to think this is a router problem as the same issue is happening to my wifes Mac Book Pro (which is only a few weeks old)...any suggestions..

Mac Pro will not wake up from sleep mode

Hi,
In my Energy Saver I have my system set to go to sleep after 15 minutes of not being used. Unfortuantely, when I try to wake the system up from sleep mode, it freezes on the screen saver and I have to hard restart the computer to get it to turn on again. I see that this is an issue with MacBook Pros, but I'm not seeing much in the Mac Pro Towers. I did see a thread about Parallels VM causing causing OSX to not wake up from hibernation mode, but I am not always running my VM Ware when the system decides to not wake up. Any help/advice is appreciated.
Thank you,
Julia
OS X Version 10.6.7
2x 2.93 GHz 6-Core Intel Xeon

.... and you fail to mention the model SSD and firmware version... or how you installed or cloned the system
most people also move most of their user folder to another hard drive.
sounds like a more normal Mail + OS issue if just that.
hard restarts = directory corruption so don't reboot w/o first either Recovery Mode, then follow up with Safe Boot.
And maybe you have 3rd party hardware or software that is not compatible with 10.8.2 needs to be considered as well.
2008 model 3,1 also are having a lot of issues this year. Including another critical piece, what gpu it has.

Dark screen remains after waking from sleep mode

Whilst using Safari Version 3.1.2, Mac OS 10.4.11 on my Powerbook G4 (aluminum, 1.5 ghz), my screen remains dark upon waking from sleep mode. Trying to increase screen brightness is ineffectual for some reason likely related to this problem. My only workaround is to force shutdown and restart. Any ideas about a solution would be greatly appreciated.

Hi Gary,
This behavior is not a Safari issue but system related.
Close all applications an run in utilities> disc repair permissions.
After you done reboot an see what happens when your Mac gets to sleep mode again. This time don't open any applications to test it. Just leave it showing your desktop.
Post back with the results ...
Dimaxum

Ibook won't wake up or crashes after waking from sleep mode

I have now had this problem for the last year with my new ibook g4 and I can confirm that the problem is present at OS X version 10.3.0 - 10.3.9 and 10.4.0-10.4.5 . I'd manage to solve it but once in a while it shows up again and i have to solve it all over again. Apple doesn't seem to care although it makes your iBook totally unusable if you can't put it to sleep mode, because of the fact that you can't leave your iBook ON while the lid is closed. Ok as I said I have this problem once in a while but I allways manages to solve it, here are my observations:
Leting the computer go into sleep mode by itself (not by closing the lid) will not result in a crash.
Before a crash the following allways occour:
1) The system gets highly unstable. Programs (mostly safari, mail and itunes) will crash without warning. The mouse reacts very slowly and lags behind. The mouse lag is a shure indication that the system will crash during the next seconds or minuts.
2) While set to automaticly connect to favorite network, the airport won't connect imidiatly, but it will take a few seconds more than usual before it connects.
3) The system sometimes crashes before it can activate the backlight resulting in the situation where people think that the system can't wake up from sleep mode and won't react.
Only forcing the computer to sleep mode can cause this failure (by pressing "sleep mode" or by closing the lid).
What i did to rule out some sources resulting in this error:
1) Something like this problem can happen when having a bad memory socket or bad memory, so I'd ran Apples Hardware test and memtest OSX, but no failure was indicated.
2) Ran the usual repair of disk permissions (like 10^6 times ), without any changes.
3) Tried to reset the PMU (Power managing unit), without any changes.
4) Also tried to make a clean installation with panther 10.3 and tiger 10.4, without changes. Before installing anything (no prgrams or updates) the system still crashes. Even after updating to. 10.3.9 and 10.4.5 the problem is still present
The solution:
Well I found out that the problem has to do with to power options. That would normally mean that reseting the PMU would help, but as I already said this didn't change anything. Apparently the system is not able to wake up the Harddisk from sleep mode, and that's basicly the problem. I don't understand why it doesn't crash when going to sleep mode all by itself, but aparently there's something diffrent by forcing the system to sleep mode. Fourthermore it's not so "happy" to change those settings for the harddisk (I will explain later).
Solution:
1) Basicly just UNCHECK the option "Set harddisk to sleep mode whenever it's possible" inside powermanagment. And set "let the computer go to sleep after" to "Never" , do this for Battery and AC Power settings.
2) And put CPU usage to "Automatic", do this for Battery and AC Power settings
3) Restart the ibook. When it plays it's startup sound reset PVRAM by holding the following keys down before the backlight turns ON: OptionCommand+PR , when you hear the startup sound again release the buttons and start OSX normally.
Now as I said this problems comes once in a while and that has to do with the fact that repairing my disk permissions can change/reset the above changes. Even if it isn't beeing displayed graphicly repairing the disk permission have reseted those changes, resulting in the fact that the system is crashing again.
So to solve this do the following for Battery and AC power settings:
1) CHECK/MARK the "Set harddisk to sleep mode whenever it's possible" inside powermanagment and put CPU usage option the low or high. And set "let the computer go to sleep after" to "Never"
2) Restart the ibook.
3) UNCHECK the option "Set harddisk to sleep mode whenever it's possible" inside powermanagment". Put CPU usage option back to "Automatic". And set "let the computer go to sleep after" to "Never"
4) Restart the ibook again. When it plays it's startup sound reset PVRAM by holding the following keys down before the backlight turns ON: OptionCommand+PR , when you hear the startup sound again release the buttons and start OSX normally.
So now it doesn't crash again.
I've read all the threads of people having this problem and apparently it has been present since OSX 10.0.0 and when calling apple support they tell you to reset PMU and repair the usual disk permissions, which of cause doesn' work. And there are aparently a lot of really angree costumers, because this problem makes the computer COMPLETLY unusable, but apple has done nothing to help those people because of the the fact there there has been released ZERO patches or changes in OSX to resolve this issue. I can't say that there is something wrong with the iBooks as the several hardware test's indicate no malfunctioning but there is some bug in Mac OSX wich specificly makes the system incable to tell some ibook's how to wake the harddisk from sleep mode.
To the fine folks working on this forum: No I will not send this to apple, they already know about this, and have done nothing (just think of the millions of crash reports they recieve from those hundreds of crashes everybody is geting from this problem). That is why I put this on the forum so that people can actually solve this problem by themselves. If you think it's worth sending to apple, so that this problem can finally be fixed after 4-5 years you are more than welcome to send it directly to somebody who will actually do something about this. And i really hope that giving people the opportunity to make ther computer work, doesn't violated the usual rule "that we are not allowed to write anything that is agains apples interests", wich often results in a removal of threads and ANY chance in SOLVING critical errors.
ibook g4 12", 512, 32 VRAM, 1.2 GHz Mac OS X (10.4.5)

sdad sdsdds:
Your observations and solution are right on the money!!
I just was working on an iBook that my father is giving to my sister. I must have started the problem by changing the sleep setting for battery to let HD sleep. After that the fun began! Instability, restart after restart, running Disk Warrior, fixing permissions over and over, etc. I finally zeroed out the HD and installed 10.4. Nothing worked until I read your post.
Thanks a lot. I understand how you feel about posting here, but please be aware that you are helping many people who would be completely without a clue otherwise. Thanks again for your efforts.
Now I can ship my sister her iBook!

After update to OS X 10.7.5 on my Mac Pro (2009) USB ports don't work at all after wake up from sleep mode; with 10.7.4 there was (nearly) any problem.

hello,
after update to OS X 10.7.5 on my Mac Pro (2009) USB ports don't work at all after wake up from sleep mode; with 10.7.4 there was (nearly) any problem.
the used ports appear to be "killed"; the unused USB ports seem to work, but the Mac works in slow-motion.
The only "solution" is to restart my Mac.
- SMC-reset, PRAM-reset or repairing user rights had no positive effect; what is the solution - a bug-fix-update???

I have a mac mini (A1283) with OS 10.7.4. Upon upgrading to 10.7.5 it did not start up again. Instead, the light was on and the hard drive did not start up. The light on the connected USB mouse was not lit.
My solution:
Cold start with Command-v pressed.
This should start Verbose mode (see http://support.apple.com/kb/HT1492 ).
What happened on my mac mini was that the grey startup screen with the Apple logo appeared for a long while before the login screen came.
Maybe Cmd-v set open firmware params and fixed some corruption.
Anyway: my mac mini works again.

MB Restarts from sleep mode??

Similar Messages

Maybe you are looking for