MB screen goes blk then comes back. A1181 model - inverter? LCD?

hello
I have got a late 2006 A1181 black MB. It works fine..until recently over these past few months the screen goes black...then it comes to life again.
If I turn it on....it could sometimes be black...then I leave it and after a few mins it comes back to life.
Yet other times, I can power on and its fine.....
Then the other day it flickered so much on/of/on/off....
I have done the resets as suggested online....to no avail.
-you can still see the desktop if you shine a light on the screen when it goes black.
-The screen doesnt flicker if I open and close the laptop lid up and back ....
How do I know if its the inverter or the actual whole entire LCD screen thats failing?
Im in no position to pay  £75 to have it looked at by someone at my local apple retailer.
And yes its still a really good little machine. ...and Im not looking to change it. Just now confused...shall I buy a new LCD or inverter? Ive seen the tutorials online and I think I could do those fixes myself...
Any help and advice would be great, thanks.
Caroline

So I did a clean install of 10.7.5 and for a day the machine had no issues. Then I used Migration Assistant to import the owner's user account. I logged into their account, deleted the temporary account I made, then rebooted. After that I tested it, and the screen DID go black on wake again.
Based on all this, I'm thinking the problem has to be some random corrupt file. Something possibly sleep related, or possibly display related. I'm going to have to investiage that avenue next. Any ideas what software issues might cause this kind of problem? In other words, what preferences files may be causing it?

Similar Messages

  • I have a "white screen " ,tried to hold the two buttons down and it still won't work.The screen goes dark, then comes back white.

    I have a "white screen",tried to hold the two buttons down and it still won't work.The screen goes dark, then comes back white.

    Morning Clementine Lin,
    For more information this, please see this article:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Take a look at the Will not turn on, will not turn on unless connected to power, or unexpected power off section.
    Have a nice day,
    Mario

  • HT1430 My IPAD 3 [5.1.1 (9B206)] has a problem. - It restarts every three (3) minutes: it goes out then comes back but lost the previous page (auto lock is set to 15 minutes) - It can no longer connect to the mobile network orange except Wireless (WIFI)

    My IPAD 3 [5.1.1 (9B206)] has a problem.
    - It restarts every three (3) minutes: it goes out then comes back but lost the previous page (auto lock is set to 15 minutes)
    - It can no longer connect to the mobile network orange except Wireless (WIFI)

    Not normal. Take it to an Apple Store for evaluation.
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/
     Cheers, Tom

  • Satellite L10-102: screen goes down, then comes very rapidly.

    Hi, I have L10-102 nootebook. Sometimes while working, screen goes down suddenly then comes very rapidly. Like natural eye blinking. ?s it a kind of main power problem or comes from different defect.
    I need advise to solve the problem.
    Thanks..

    Hi Manuel
    Believe me according to your explanation it is not easy to say what happen exactly. In my opinion just an intensive check can result with some explanation.
    Is your unit permanent connect to the AC adapter when this happen?
    Is the monitor off function enabled in power manager?
    On this way it is not easy to say what happen.

  • I am trying to download the update to Photo Effects (Lite) v 3.0.0, for several weeks now without success. I press the update button and it goes away, then comes back again without any change. Can someone help please?

    The update to Photo Effects (Lite) v 3.0.0 won't work. I've tried for several weeks without any result. I press the download button and it disappears, then reappears again. Can any one help, please?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select
              /var/log ▹ appstore.log
    from the hierarchical list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar.
    Each message in the log begins with the date and time when it was entered. Select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    ☞ The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

  • TV Screen goes blank, pixilates, then comes back

    We have 2 sets out of 4 that will pixilate, go blank for 5-10 seconds then come back.  It is very intermittent, may work fine for hours then will do this for several hours.  All cable connections are tight, tv's are new.  Any other ideas?

    Fishermanwr wrote:
    We have 2 sets out of 4 that will pixilate, go blank for 5-10 seconds then come back.  It is very intermittent, may work fine for hours then will do this for several hours.  All cable connections are tight, tv's are new.  Any other ideas?
    Try swapping the connections at the splitter:  The 2 pixilating ones with the 2 that are OK.  See if the problem goes with the switch.  If it does then it's the splitter.  By the way this is strictly a guess.

  • My 27in LED monitor goes black, pops then comes back on

    Brand new 27in LED monitor goes black, popping sound comes from speakers (I think) then comes back on. Plugged into my brand new Macbook Pro 2.2 GHz i7. Unplugged every thing and it still does it. Has most recent firmware. Just started after five days of ownership. Do I need to take it back to the Apple Store?
    JBP

    Had a second-hand TV once (I am cheap -- sue me).  One day the screen went fritzy and the room smelled of ozone.
    Ozone is a big clue with regards to electronic equipment.

  • How can I transfer video taken with my iPhone to my iPad WITHOUT using a computer or iTunes? I'm going to Europe for a month and want to use my iPhone to take pics and video, then come back to the hotel room and use my iPad to edit/store each evening.

    How can I transfer video taken with my iPhone to my iPad WITHOUT using a computer or iTunes? I'm going to Europe for a month and want to use my iPhone to take pics and video, then come back to the hotel room and use my iPad to edit/store each evening. I don't want to use my iPad to take the video...too large/bulky. And I WON'T have a computer with me...I purchased the iPad to take with me so I could use the RDC to my home computer and avoid taking my computer at all. Is this possible?

    here is a cheaper solution than camera kit and a lot easier if you have WIFI available.
    I use the PhotoSync APP (I think its a $1.99) will transfer videos and photos over WIFI to any other IOS device or even PC/MAC. Great app since I like doing video and photos on my IPHONE and transfer to IPAD2 without synching through computer or doing cloud based storage.
    You can even send photos/videos from your MAC/PC to your IOS devices that way too. Makes it so much easier.
    Here is the link;
    http://www.photosync-app.com/

  • Ff comes on, I go to site w/ pics the screen goes black & then w/ with a bubble from the bottom saying recovery from igfx display failure..Chr & Op = OK

    Firefox comes on, I go to a site rich w/ visual content & then the screen goes black & then white w/ with a bubble from the bottom bar saying recovery from igfx display failure..this used to happen on my Chrome browser (the Chr browser recovered spontaneously But I removed & reset it... still the problem went on & I quit using Chr for2-3 mos. There never was a problem on Opera. Hey! OPERA rule. As foe IE 8. That instrument is completely useless. Even all areon IE appears to be dead...Thanx!

    Try disabling hardware acceleration in Firefox.
    https://support.mozilla.org/en-US/kb/upgrade-graphics-drivers-use-hardware-acceleration#w_turning-off-hardware-acceleration

  • Screen shuts down and stays down for about 10 seconds then comes back on , hooked to mac mini . Any idea how to repair?

    Screen shuts down and stays down for about 10 seconds then comes back on , hooked to mac mini . Any idea how to repair?

    What Monitor do you have and how is it connected to the Mac Mini...?

  • When I rip a cd, then use another program, then come back to itunes, the cd stops ripping and the cd doesn't show up in the side bar anymore. What's going on here?

    When I rip a cd in itunes, then go to use another program, then come back to itunes, the cd stops ripping and the cd doesn't show up in the side bar anymore. What's going on here?  I am running the x64 version of itunes in Windows 7.

    Just wanted to say that you're not the only one with the problem: http://discussions.apple.com/thread.jspa?messageID=13009436

  • Having trouble with music apps shutting down, even after I swipe them off the screen. They go off then come back on in a few minutes. This happens in my car either ubs plugged in, or bluetooth. ANy one else have that issue?

    Having trouble with music apps shutting down, even after I swipe them off the screen. They go off then come back on in a few minutes. This happens in my car either ubs plugged in, or bluetooth. ANy one else have that issue?

    Hi, beth.lau.gr.
    Thank you for visiting Apple Support Communities.  
    I understand you have been experiencing issues with your iPhone restarting and showing you a blue screen.  I wont be able to give you an exact answer as to why this is happening.  However, this is the most relevant troubleshooting article for this issue.  This article also provides options to reach out to us via phone for additional assistance.  
    If your iOS device restarts, displays the Apple logo, or powers off while you're using it
    http://support.apple.com/en-us/HT203899
    Cheers, 
    Jason H.  

  • Hi, I have an iphone4 and all of a sudden none of the apps (except the ones that came with the phone) will open. The screen goes black then it goes back to the homescreen. Any ideas? Thanks in advance!

    Hi,
    I have an iphone 4 and all of a sudden none of the apps will work, except the ones that came with the phone. When I open them the screen goes black then it goes back to the homescreen.
    Also when I plug the phone into itunes it only gives me the option to either restore or eject the phone. Up until today I never had any problems, I sync it regularly and all the software (inc itunes) is up to date. The last time I backed it up was about a month ago when I got the phone, (a replacement as my other iphone4 had loads of problems) so I don't want to have to restore it and lose everything off it!
    Any ideas? Thanks in advance!

    Sounds like the device was dropped at some point and damaged as a result.
    Take it to Apple for evaluation and a replacement.

  • HDMI output cuts out and then comes back, any ideas?

    Hi all.
    I have a two Dell U2412Ms connected to my MacBook Pro Retina. One is connected via a Displayport connection and the other via the HDMI. I used to have them both connected to the Displayport conenctors but have recently run a cable into my office and now have the ethernet dongle connected to one of the Thunderbolt ports.
    Since connecting a screen to the HDMI port, I've noticed that it does something odd from time to time. The screen connected to the HDMI port will go off for a couple of seconds, and then come back on again. It tends to only do this once per 'session' of me using the system. Most times when the screen comes back on, it is fine - but once it came back on the screen was going bananas. It appeared to be mostly grey, but looking closer revealed that all the pixels were going nuts, like a swarm of flies - and there was all sorts of colours going on! I had to unplug the HDMI connection (which caused my windows to move around) and then reconnect it, and then it was fine.
    This only happens when using the HDMI port, and is not the monitor at fault - I eliminated it by swapping the screens over so that the other one was using the HDMI .. and it still happened!

    As it turns out, the USB failed. The Apple people kept my PB and sent it for repair.
    I dropped by the genius bar and left it with them on Dec 14 being told it would take 10 business days or so to get it back.
    My trackpad button was very stiff, it stuck and had to press harder than normal to click. This was in effect since I took it out of the box when I bought it. Never bothered as I use a Bluetooth Apple mouse. Now that they kept it for repair for the USB port, they will also fix the trackpad.

  • Machine randomly shuts off and then comes back on.

    Hello! Basically whats happening is my computer randomly shuts off (No blue screen just powers off) and then immediately comes back on.
    I am running three monitors and a single GPU.  This has happened in two different cities (I moved) I have the same surge protector - however, other things on the protector do not reset / go off (alarm clock no battery).
    Here are the crash dumps that microsoft said happened. (I uploaded three different ones) 
    http://www.mediafire.com/download/juwuzck8wpq6j0r/issues.rar
    I'm a pretty avid builder but I'm a bit stumped with this issue. The machine will, at random, shut off completely (including lights) and then come back on, during normal activities and gameplay.
    The temps do not appear to be reaching astronomic levels, maxing out at around 60-65c (cpu) and 45c for the GPU.
    Parts:
    cpu - i7 3960x (turbo enabled normal at 3.3, w/ turbo at 3.9ghz)
    mobo -  MSI X79A-GD45 /// Intel DX79SI (have tried both, it still happens with either, MSI is a new board.
    psu - 750 Antec Gold High Current Pro
    gpu - MSI Lightning 680 (no OC)
    sdd - samsung 840 pro 
    hdd - Black 1TB
    case - HAF 942-x
    cooler - x40 kraken
    ram - G.SKILL Ripjaws Z Series 32GB (DDR1600)
    Here's what I tried
    1. Bought a new motherboard (MSI $260) to see if the issue would go away. - Failed.
    2. Was able to reproduce the issue VERY quickly when using the OC Genie2 on the MSI board, with teh button pressed, I could boot up OCCT and have it reproduce the issue with the power-off in around 2 minutes of the test. - Failed
    3. Attempted PSU and GPU stress test with stock BIOS, tests ran 1 hr+ each with no issues.  Shut down my machine and restarted it this morning and the issue came back within 5 minutes of use just sitting at the Windows Desktop. - Failed.
    4. Turned the 32 GB of ram to 1600 and enabled XMP, crashed after 3-5 days.
    5. Attempting to test each DIMM individually.
    6. Issue happened again after about two weeks of not happening.
    I've run OCCT for an hour with the "stock" bios and it didn't crash for an entire hour.  I've also attempted to use the "OC genie2" overclock function and that triggered a crash within 2 minutes of the run.
    Can anyone give me some more things to try? I'm thinking its possible it could be the PSU, but after running OCCT PSU test for 30+ minutes it had no issues.

    * Bugcheck Analysis *
    BAD_POOL_HEADER (19)
    The pool is already corrupt at the time of the current request.
    This may or may not be due to the caller.
    The internal pool links must be walked to figure out a possible cause of
    the problem, and then special pool applied to the suspect tags or the driver
    verifier to a suspect driver.
    Arguments:
    Arg1: 0000000000000020, a pool block header size is corrupt.
    Arg2: fffffa802224f9e0, The pool entry we were looking for within the page.
    Arg3: fffffa802224fa50, The next pool entry.
    Arg4: 0000000004070006, (reserved)
    Debugging Details:
    TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2
    BUGCHECK_STR: 0x19_20
    POOL_ADDRESS: GetPointerFromAddress: unable to read from fffff800036ca100
    GetUlongFromAddress: unable to read from fffff800036ca1c0
    fffffa802224f9e0 Nonpaged pool
    CUSTOMER_CRASH_COUNT: 1
    DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
    PROCESS_NAME: chrome.exe
    ++++++++++++++++++===============================++++++++++++++++++++++==========4
    * Bugcheck Analysis *
    VIDEO_TDR_TIMEOUT_DETECTED (117)
    The display driver failed to respond in timely fashion.
    (This code can never be used for real bugcheck).
    Arguments:
    Arg1: fffffa80262bc4e0, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
    Arg2: fffff8800fa2be20, The pointer into responsible device driver module (e.g owner tag).
    Arg3: 0000000000000000, The secondary driver specific bucketing key.
    Arg4: 0000000000000000, Optional internal context dependent data.
    Debugging Details:
    TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2
    FAULTING_IP:
    nvlddmkm+153e20
    fffff880`0fa2be20 ?? ???

Maybe you are looking for