MB Sleep Error
90% of the time when I put my MB to sleep, and open it a few hours later, the keyboard will light up but the display won't turn on. So I have to Manually turn it off and then back on, and a massage pops up that says "Mac OSX quit unexpectedly, and was unresponsive when system was rebooted" Can I fix this?
makbook wrote:
Should I try reinstalling iPhoto?
Yea, try reinstalling iPhoto and hopefully that'll work.
To answer your question from the other post, according to [apples support document|http://support.apple.com/kb/HT1545]
"If there are things in the Previous System folder that aren't in the new System folder, copy them over or reinstall. If you're not sure what some items are (and don't seem to need them), leave them in the Previous System folder. Once you're comfortable that you've got everything you need out of it, you can delete the Previous System folder (or leave it around if you have enough free disk space)."
So get the info you want off the previous system that is not on your current system, get that off there and you can delete the folder.
Similar Messages
-
HT203254 Macbook Pro Sleep Error
I need to know what to do with my mac. When I first received it I had no issues but after about 3 months use, I began seeing problems. After letting my mac fall asleep, when I attempt to wake it up the screen will momentarily light up rendering the cursor visible and the keyboard will proceed to light up as well. Every time a key is clicked after that the error tone will persist. The only way to get out of this "freeze" is to manually shut off the computer and turn it on again. However, the next time it goes to sleep it will proceed to do the same thing. What is wrong? What do I do?
OSX 10.8.2
2.5 GHz Intel Core i5
8 GB 1600 MHz DDR3
Serial Number: C02J*****V30Make a "Genius" appointment at an Apple Store to have the machine tested.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to bare metal from any of them.) Don’t erase the recovery partition, if present.
*An SSD doesn't need to be zeroed. -
Macbook Pro won't wake from sleep - Error 4 trying to transition CPU 1 to OFF
My macbook pro wont wake from sleep, it restarts and I get this problem report / kernal panic, if anyone could help that would be wonderfull. Thankyou.
Interval Since Last Panic Report: 203371 sec
Panics Since Last Report: 15
Anonymous UUID: XXXXXXXX
Mon Apr 22 17:42:20 2013
panic(cpu 0 caller 0xffffff80046c02ee): "Error 4 trying to transition CPU 1 to OFF"@/SourceCache/xnu/xnu-2050.22.13/osfmk/i386/acpi.c:182
Backtrace (CPU 0), Frame : Return Address
0xffffff80e6cbbc70 : 0xffffff800461d626
0xffffff80e6cbbce0 : 0xffffff80046c02ee
0xffffff80e6cbbd40 : 0xffffff7f8694f8d3
0xffffff80e6cbbd70 : 0xffffff7f86952e9a
0xffffff80e6cbbd90 : 0xffffff8004a59e7e
0xffffff80e6cbbde0 : 0xffffff8004a75432
0xffffff80e6cbbe20 : 0xffffff8004a3b6e6
0xffffff80e6cbbe60 : 0xffffff8004a35a42
0xffffff80e6cbbeb0 : 0xffffff8004a3f8c4
0xffffff80e6cbbef0 : 0xffffff8004a3f99f
0xffffff80e6cbbf30 : 0xffffff8004a452aa
0xffffff80e6cbbf80 : 0xffffff8004a453d9
0xffffff80e6cbbfb0 : 0xffffff80046b2977
Kernel Extensions in backtrace:
com.apple.driver.AppleACPIPlatform(1.7)[D49DC2E0-97DF-32E6-A8ED-7A12EF1AA51B]@0 xffffff7f86945000->0xffffff7f8699cfff
dependency: com.apple.iokit.IOACPIFamily(1.4)[A35915E8-C1B0-3C0F-81DF-5515BC9002FC]@0xfffff f7f84be6000
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f84ca3000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12D78
Kernel version:
Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
Kernel UUID: 3EB7D8A7-C2D3-32EC-80F4-AB37D61492C6
Kernel slide: 0x0000000004400000
Kernel text base: 0xffffff8004600000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 42160665696
last loaded kext at 9523564336: com.apple.driver.AppleHWSensor 1.9.5d0 (addr 0xffffff7f866a0000, size 36864)
loaded kexts:
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleBluetoothMultitouch 75.19
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AGPM 100.12.87
com.apple.driver.AudioAUUC 1.60
com.apple.driver.IOBluetoothSCOAudioDriver 4.1.3f3
com.apple.driver.IOBluetoothA2DPAudioDriver 4.1.3f3
com.apple.iokit.IOBluetoothSerialManager 4.1.3f3
com.apple.iokit.IOBluetoothUSBDFU 4.1.3f3
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.1.3f3
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.ApplePolicyControl 3.3.0
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleBacklight 170.2.5
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDAHardwareConfigDriver 2.3.7fc4
com.apple.driver.AppleHDA 2.3.7fc4
com.apple.GeForce 8.1.0
com.apple.driver.AppleMikeyDriver 2.3.7fc4
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleMCCSControl 1.1.11
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleSMCLMU 2.0.3d0
com.apple.driver.AppleIntelHDGraphics 8.1.0
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleMuxControl 3.3.0
com.apple.driver.AppleIntelHDGraphicsFB 8.1.0
com.apple.nvidia.NVDAStartup 8.1.0
com.apple.driver.SMCMotionSensor 3.0.3d1
com.apple.driver.AppleUSBTCButtons 237.1
com.apple.iokit.SCSITaskUserClient 3.5.5
com.apple.driver.AppleUSBCardReader 3.1.7
com.apple.driver.AppleUSBTCKeyEventDriver 237.1
com.apple.driver.AppleUSBTCKeyboard 237.1
com.apple.driver.AppleIRController 320.15
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.3.1
com.apple.driver.AirPort.Brcm4331 614.20.16
com.apple.driver.AppleAHCIPort 2.5.1
com.apple.driver.AppleUSBHub 5.5.5
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.iokit.AppleBCM5701Ethernet 3.6.0b1
com.apple.driver.AppleUSBEHCI 5.5.0
com.apple.driver.AppleUSBUHCI 5.2.5
com.apple.driver.AppleEFINVRAM 1.7
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 1.7
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.7
com.apple.driver.AppleAPIC 1.6
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.kext.triggers 1.0
com.apple.driver.IOBluetoothHIDDriver 4.1.3f3
com.apple.driver.AppleMultitouchDriver 235.29
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.1.3f3
com.apple.iokit.IOSurface 86.0.4
com.apple.iokit.IOBluetoothFamily 4.1.3f3
com.apple.driver.DspFuncLib 2.3.7fc4
com.apple.iokit.IOAudioFamily 1.8.9fc11
com.apple.kext.OSvKernDSPLib 1.6
com.apple.driver.AppleSMBusController 1.0.11d0
com.apple.nvidia.nv50hal 8.1.0
com.apple.NVDAResman 8.1.0
com.apple.driver.AppleSMBusPCI 1.0.11d0
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.3.0d51
com.apple.driver.AppleHDAController 2.3.7fc4
com.apple.iokit.IOHDAFamily 2.3.7fc4
com.apple.driver.AppleGraphicsControl 3.3.0
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.7
com.apple.iokit.IOGraphicsFamily 2.3.7
com.apple.driver.AppleSMC 3.1.4d2
com.apple.driver.AppleUSBHIDKeyboard 170.2
com.apple.driver.AppleHIDKeyboard 170.2
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.5
com.apple.iokit.IOUSBMassStorageClass 3.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.5
com.apple.driver.AppleUSBMultitouch 237.3
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.driver.AppleUSBMergeNub 5.5.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IO80211Family 522.4
com.apple.iokit.IOAHCIFamily 2.3.1
com.apple.iokit.IOUSBUserClient 5.5.5
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOUSBFamily 5.5.5
com.apple.driver.AppleEFIRuntime 1.7
com.apple.iokit.IOHIDFamily 1.8.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220.2
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 345
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.7
com.apple.iokit.IOPCIFamily 2.7.3
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.58f16
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463531323634485A2D3147314431
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463531323634485A2D3147314431
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.16)
Bluetooth: Version 4.1.3f3 11349, 2 service, 18 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: M4-CT512M4SSD2, 512.11 GB
Serial ATA Device: WDC WD7500BPKT-00PK4T0, 750.16 GB
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa140000 / 6
USB Device: Ext HDD 1021, 0x1058 (Western Digital Technologies, Inc.), 0x1021, 0xfa142000 / 11
USB Device: hub_device, 0x0424 (SMSC), 0x2640, 0xfa141000 / 10
USB Device: iPhone, apple_vendor_id, 0x12a0, 0xfa141300 / 14
USB Device: Ext HDD 1021, 0x1058 (Western Digital Technologies, Inc.), 0x1021, 0xfa141200 / 13
USB Device: Ultra Fast Media Reader, 0x0424 (SMSC), 0x4060, 0xfa141100 / 12
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0237, 0xfa120000 / 5
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 9
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa130000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfd130000 / 4
USB Device: Apple Keyboard, apple_vendor_id, 0x0250, 0xfd132000 / 5
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3Until a knowledgeable user comes along who can read kernel panic logs, search for a solution from the following links:
OS X: About kernel panics
User Tip: Kernel Panics? Don't panic too!
How to troubleshoot a kernel panic
MacBook, Mac OS X (10.6)
Use Software Update or the OS 10.6.8 combo update to update your OS. Also, update everything SU has to offer for your computer as well as your USB connected devices. When done, repair permissions and restart your computer. -
HP Pavilion, Monitor going to sleep error
When i start up my HP Pavilion, It shows a screen with no vga signal, and then it says "Monitor going to sleep" I do not know what to do? Please help.
I am having the same problem where my Desktop turns on, nothing comes up on the monitor and it goes to sleep fairly quickly, and the fan just keeps running in the tower and is louder than normal. The keyboard does not seem to be responsive and I checked to make sure my monitor is working. How would a bad graphics card make the fans keep running like that?
-
Persistent Wake-from-sleep Error (!)
I have thoroughly searched both google and these forums for help with this problem, and although it appears to be a common one, a solution has not yet been found :
Every so often and very randomly, my PB G4 12" will not properly / fully wake from sleep. When opening the lid, the computer makes all the normal noises as if it were waking, but the screen does not go on. Caps lock / Num lock keys behave as though the system were awake, and attached USB mouse is also lit up. All other aspects of the system are completely unresponsive - 'coma' (!!). The only way out of the lock-up is a force restart - i've had to do that at least 5 times this week.
I have tried EVERYTHING (i can think of!) to try to fix this problem :
reset NVRAM
reset PMU
reset PRAM etc, etc. etc!
trashed all caches etc..
reinstalled OS (twice!).
checked system with both TechTool Pro + Apple Hardware Test - both report that system is in perfect working order.
I've also tried trashing the PowerManagement prefs (some users have report some success in trying this).
No effect.
I didn't want to call tech support unless absolutely necessary, because i'm sure anyone who's called before has been 'helpfully' talked through repairing permissions etc...
Does anyone here have any ideas???!Forgot to mention that this morning i checked logs after restarting and found this entry:
* First (successful) wake-from-sleep attempt: ****
Oct 18 07:44:29 PowerBook-G4-12-1GHz kernel[0]: System Sleep
Oct 18 07:44:29 PowerBook-G4-12-1GHz kernel[0]: System Wake
Oct 18 07:44:29 PowerBook-G4-12-1GHz kernel[0]: Wake event 0008
Oct 18 07:44:29 PowerBook-G4-12-1GHz kernel[0]: Sound assertion "0 != err" failed in "AppleLegacyAudio/AppleTexas2Audio/AppleTexas2Audio.cpp" at line 960 goto Exit
Oct 18 07:44:29 PowerBook-G4-12-1GHz kernel[0]: ADB present:8c
Oct 18 07:44:31 PowerBook-G4-12-1GHz mDNSResponder: Repeated transitions for interface lo0 (127.0.0.1); delaying packets by 5 seconds
Oct 18 07:44:38 PowerBook-G4-12-1GHz kernel[0]: [AppleUSBHCIController][StopIsochPipeRead] - mInt1IsochInPipe = 0 - numReadsPending = 0
* UNSUCCESSFUL wake-from sleep ***
Oct 18 07:50:05 PowerBook-G4-12-1GHz kernel[0]: System Sleep
Oct 18 07:50:05 PowerBook-G4-12-1GHz kernel[0]: System Wake
Oct 18 07:50:05 PowerBook-G4-12-1GHz kernel[0]: Wake event 0001
Oct 18 07:50:05 PowerBook-G4-12-1GHz kernel[0]: Sound assertion "0 != err" failed in "AppleLegacyAudio/AppleTexas2Audio/AppleTexas2Audio.cpp" at line 960 goto Exit
Oct 18 07:50:05 PowerBook-G4-12-1GHz kernel[0]: ADB present:8c
* FORCE REBOOT*
Oct 18 08:00:04 localhost kernel[0]: standard timeslicing quantum is 10000 us
Oct 18 08:00:04 localhost kernel[0]: vmpagebootstrap: 188791 free pages
Oct 18 08:00:04 localhost mDNSResponder-107 (Mar 20 2005 20: 31:47)[44]: starting
Oct 18 08:00:04 localhost kernel[0]: migtable_maxdispl = 70
Oct 18 08:00:04 localhost kernel[0]: 88 prelinked modules
Oct 18 08:00:04 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Oct 18 08:00:04 localhost kernel[0]: The Regents of the University of California. All rights reserved.
etc.
------------------------- -
I just recently got my mac mini repaired and now I cannot get it out of sleep. I have to shut down the entire computer and reboot it. Is there any way I can fix this?
Is it booting in Verbose Mode I wonder?
Open Terminal and paste this in...
sudo nvram boot-args=""
Hit return & enter an admin password which will not show as you're typing, hit enter again.
Have you done a PRAM reset, CMD+Option+p+r...
http://docs.info.apple.com/article.html?artnum=2238
Hold those 4 keys ubtil you hear the 4th chime, takes a while. -
For some reason my computer frooze when I tried to sleep it. I quit all applications as usual before selecting sleep, and for the 2nd time ever. The computer screen went black like it does before it switches the monitor off. However it never switched the monitor off. I had to hold the power button down to shut the computer off (which I have a feeling is really bad for the hard drive).
This is very frustrating because I have to choose between letting my computer stay in between sleep and on. vs. turning my computer off abruptly.
Image of what screen looked like:
http://img411.imageshack.us/img411/8371/dsc02843s.jpghello,
Try this hint : It was the solution for me.
Launch Terminal App.
After you launch Terminal, the first step is to determine which sleep mode your Mac is currently using (in case you wish to go back to it). You can both view and change the sleep mode using the Unix program pmset. To see your current settings, type pmset -g | grep hibernatemode. You should see something like this:
pmset -g | grep hibernatemode hibernatemode 3
Great, so your machine is using mode 3, whatever that might be. Well, thanks to the documentation for the handy Deep Sleep Dashboard widget, which puts your machine immediately into hibernation mode (so you don’t have to yank all the power sources to invoke it), we can tell exactly which mode is which:
0 - Old style sleep mode, with RAM powered on while sleeping, safe sleep disabled, and super-fast wake.
1 - Hibernation mode, with RAM contents written to disk, system totally shut down while “sleeping,” and slower wake up, due to reading the contents of RAM off the hard drive.
3 - The default mode on machines introduced since about fall 2005. RAM is powered on while sleeping, but RAM contents are also written to disk before sleeping. In the event of total power loss, the system enters hibernation mode automatically.
To change your sleep mode, you use pmset again, providing the variable and value you wish to assign. So to return to the old style sleep mode (which is mode 0 from the above list), enter this command:
sudo pmset -a hibernatemode 0
Press Return, and you’ll be asked for your password. Provide it, and your sleep mode has been changed. Note that restarting is not required for these changes to take effect.
Recover some drive space
If your machine was previously set to mode 3 (or 7 ) and you’ve reverted to the old style sleep mode, you’ve got one more step to take: recover the drive space used up by the copy of your system’s RAM, which was created the last time you slept the machine prior to making the switch. In Terminal, enter these two commands, pressing Return after each and providing your password when asked (in my case it didn't ask for my password again after changing the sleep mode)
cd /var/vm
sudo rm sleepimage
In my case it released almost 8GB of disc space. I guess it will closely amount the amount of RAM your system has. Ironically, by trying to make a "super system" by paying $2,000 for 8GB RAM plus the SSD drive, it might have been to much RAM to copy and recover to the SSD every time the system goes to sleep and wakes up...as they say "the best is sometimes enemy of the good". -
My system:
Model #: IQ506
Product #: KQ437AA-ABA
Serial #:[Personal Information Removed]
Software Build #: 83NAv6XrA5
Service ID #: 011-410
PCBRAND: Pavilion
Had to have my system recovered. Using Vista. When my computer goes to sleep mode and I move the mouse to wake up, I first get a black screen which gradually lightens and returns to whatever was on when sleep started. However, the HP wireless mouse pointer freezes for about 30 seconds before I can resume. Happens every time. It's not just a mouse problem because of the screen delay. Unwaken used to happen immediately. I know I can delete and reload the mouse driver. Any suggestions?Hi philsachoker:
I am sorry you are having issues with your PC, since doing a system recovery. I understand you are having a sleep mode issue. I am sending you a link to "Resolving Problems with Sleep Mode (Windows Vista)"click here. I hope this will help . If you require further assistance then please reply back.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
HP Monitor going to sleep on start up
Ok, I've dealt with this problem long enough. I have an HP pavilion Elite, hpe 400f. Monitor worked great on it, then one night while I was checking my email, the picture went scrabled, and ever since I am faced with a "Monitor Going to sleep" error on start up. I can not get into my settings or do anything.
It does not work on other working monitors, I tried a whole new set of cables and when that did not help, I went and bought a new graphics card. That did no good either. But I can not install the drivers until I can actually see how to do it.
So what now? Nothing HP told me works. I am about to go crazy with this. I've begged HP to help me for a year off and on to no prevail.
Can you PLEASE help me?
This question was solved.
View Solution.Hello @ddanh123,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your monitor is faced with a "going to sleep" error message on startup, and I would be happy to assist you in this matter!
To restore the display on your desktop computer, I recommend following this document on Flat Panel Monitor Displays Message about No Signal, Signal out of Range, Sleep, or Power Save. This should help examine any possible steps that may have been missed.
If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
***ERROR *** Too much drift between GetTickCount and Hi Performance (In WEC7)
Hi
I facing an issue on WEC7 when run CTK test: Compare All three Timers Drift - Busy Sleep and OS Sleep. Error as below:
Compare All Three Timers Drift - Busy Sleep and OS Sleep: *** ERROR *** Too much drift between GetTickCount and Hi Performance.
Compare All Three Timers Drift - Busy Sleep and OS Sleep: *** ERROR *** GetTickCount is at 120001 ticks.
Compare All Three Timers Drift - Busy Sleep and OS Sleep: *** ERROR *** Hi Performance should be between 120000 and 120003 ticks inclusive. Instead, it is at 120401. These numbers are using GetTickCount's units.
Compare All Three Timers Drift - Busy Sleep and OS Sleep: *** ERROR *** Too much drift between Hi Performance and Time of day (RTC).
Compare All Three Timers Drift - Busy Sleep and OS Sleep: *** ERROR *** Hi Performance is at 229966072999 ticks.
Compare All Three Timers Drift - Busy Sleep and OS Sleep: *** ERROR *** Time of day (RTC) should be between 229964000000 and 229969730000 ticks inclusive. Instead, it is at 229201910000. These numbers are using Hi Performance's
I was using August 2014 WEC7 release build. Are this is Known Issue on WEC7?
However, I can get all passed with same platform setup in WEC2013. Can anyone give me some advise?Hi
I facing an issue on WEC7 when run CTK test: Compare All three Timers Drift - Busy Sleep and OS Sleep. Error as below:
Compare All Three Timers Drift - Busy Sleep and OS Sleep: *** ERROR *** Too much drift between GetTickCount and Hi Performance.
Compare All Three Timers Drift - Busy Sleep and OS Sleep: *** ERROR *** GetTickCount is at 120001 ticks.
Compare All Three Timers Drift - Busy Sleep and OS Sleep: *** ERROR *** Hi Performance should be between 120000 and 120003 ticks inclusive. Instead, it is at 120401. These numbers are using GetTickCount's units.
Compare All Three Timers Drift - Busy Sleep and OS Sleep: *** ERROR *** Too much drift between Hi Performance and Time of day (RTC).
Compare All Three Timers Drift - Busy Sleep and OS Sleep: *** ERROR *** Hi Performance is at 229966072999 ticks.
Compare All Three Timers Drift - Busy Sleep and OS Sleep: *** ERROR *** Time of day (RTC) should be between 229964000000 and 229969730000 ticks inclusive. Instead, it is at 229201910000. These numbers are using Hi Performance's
I was using August 2014 WEC7 release build. Are this is Known Issue on WEC7?
However, I can get all passed with same platform setup in WEC2013. Can anyone give me some advise? -
IMac - stop internal disk from sleeping
I have a 27" iMac Late 2013 running Yosemite. I am trying to stop the internal disk from spinning down or going to sleep. It is a Seagate 3TB ST3000DM001. If anyone any ideas on what I need to accomplish this please let me know. I do not understand why they would set it up to spin down the disk. All it does is shorten it's life and replacing a drive in these systems is not that easy. The changes below are what I have done so far. Thanks in advance!!
Jeff
The "Put hard disk to sleep when possible" is not checked in Preferences Energy saver.
The pmset command output is as follows.
$ sudo pmset -g
System-wide power settings:
DestroyFVKeyOnStandby 0
Active Profiles:
UPS Power -1
AC Power -1*
Currently in use:
standby 0
Sleep On Power Button 1
womp 0
halfdim 1
hibernatefile /private/var/vm/sleepimage
darkwakes 0
autorestart 0
networkoversleep 0
disksleep 0
sleep 0
autopoweroffdelay 14400
hibernatemode
0
autopoweroff
1
ttyskeepawake
1
displaysleep
60
standbydelay
10800
$After some research here is where I am at.
Here is why the disk went into sleep mode (output from pmset -g log"):
2015-04-03 20:51:50 -0400 Assertions PID 29(powerd) TimedOut InternalPreventSleep "com.apple.powermanagement.darkwakelinger" 00:00:15 id:0xd00000aa9 [System: PrevIdle SRPrevSleep kCPU]
Time stamp Domain Message Duration Delay
========== ====== ======= ======== =====
UUID: 30C725A5-4409-4F24-843B-E6475DA41866
2015-04-03 20:51:50 -0400 Sleep Entering Sleep state due to 'Idle Sleep': Using AC 60273 secs
2015-04-03 20:51:53 -0400 PM Client Acks Delays to Sleep notifications: [com.apple.apsd is slow(2824 ms)] [discoveryd is slow(3144 ms)]
I reset my "disksleep" value to 0 but saw this message. I always thought this was just informative type message.
$ sudo pmset -a disksleep 0
Warning: Idle sleep timings for "UPS Power" may not behave as expected.
- Disk sleep should be non-zero whenever system sleep is non-zero.
$
I tried using the old "spindown" setting instead of "disksleep" but got the same message about "system sleep" is non-zero. Maybe it is telling me something.
$ sudo pmset -a spindown 0
Warning: Idle sleep timings for "UPS Power" may not behave as expected.
- Disk sleep should be non-zero whenever system sleep is non-zero.
Even though I could not find a “system sleep” or “sleep” setting in the pmset man page I thought I’d try both. The one that seemed to work was setting “sleep”.
$ sudo pmset -a sleep 0
$
I tried to see the value for sleep but it seemed not to exist. Which is strange because it accepted the command without an error.
$ sudo pmset -g sleep
Error: unhandled argument sleep
Usage: pmset <options>
See pmset(1) for details: 'man pmset'
$
What is interesting is that now when I run the command to set "spindown" or "disksleep" to 0 it does not complain that the "system sleep" is non-zero. Which I think is a good sign. Well I’ll know if it fixes it in a month.
$ sudo pmset -a spindown 0
$
$ sudo pmset -a disksleep 0
$
Jeff -
Mid-2011 MacBook Air EFI still messed up 8-9-14
Ok, so now my MacBook Air reboots itself while the clamshell is shut. Last time it had been shut for a couple of hours when I heard the OS X reboot noise. Now, I'm getting a Sleep Error...
Ok, so now my MacBook Air reboots itself while the clamshell is shut. Last time it had been shut for a couple of hours when I heard the OS X reboot noise. Now, I'm getting a Sleep Error...
-
Synchronising two different objects
Hi everyone,
I am asking for your help while i am writing an example code. I want to learn how to synchronise two differents objects.
The first class is actually a MIDlet, which has to increase a counter and display it until the second class send a message to the midlet. At this moment, the midlet has to display the message. I am actualy thinking about adding another thread, but lets speak only about the midlet and the calculator :)
I think there is a problem in my way of thinking, that's why i am asking for your help :
Here is an extract of my midlet code :
public class Main extends MIDlet implements CommandListener {
private static boolean isFromCalculator = false;
private static boolean displayUsed = false;
Command exitCmd = new Command("Exit", Command.EXIT, 1);
Command pauseCmd = new Command("Pause", Command.OK, 1);
TextBox tb = new TextBox("Principal", "", 200, 1);
int cpt = 0;
Calculator calc = new Calculator();
public Main()
calc.start();
tb.addCommand(exitCmd);
tb.addCommand(pauseCmd);
tb.setCommandListener(this);
public void startApp() {
process();
public void pauseApp() {
public void destroyApp(boolean unconditional) {
public void process()
// Tant que l'on a pas d'infos des deux autres threads, on compte !
while ( !isFromCalculator )
if ( displayUsed )
synchronized(this){
try{
wait();
catch (Exception e)
e.printStackTrace();
display("Principal : " + cpt + "\n", 1);
cpt++;
deroute();
public void display(String message, int time)
displayUsed = true;
tb.delete(0, tb.size());
tb.insert(message, tb.size());
Display.getDisplay(this).setCurrent(tb);
synchronized(this)
try{
wait(time);
catch (Exception e )
{e.printStackTrace();}
displayUsed = false;
notifyAll();
public void deroute()
if ( isFromCalculator == true )
// Manage Calculator message
display(calc.Message(), 1000);
isFromCalculator = false;
process();
public static void setBoolFromCalculator(boolean b)
isFromCalculator = b;
public static boolean isDisplayUsed()
return displayUsed;
}And here is my calculator code :
public class Calculator extends Thread{
private int iterator;
private boolean quit;
public Calculator()
iterator = 0;
quit = false;
public void run()
while ( !quit )
iterator++;
// 100 Boucles maxi
if ( iterator > 100)
quit = true;
try{
sleep(1000);
catch (InterruptedException e )
System.out.println("Calculator sleep error : ");
e.printStackTrace();
if (iterator % 10 == 0)
if ( !Main.isDisplayUsed() )
synchronized(this)
try{
wait();
catch(Exception e)
e.printStackTrace();
Main.setBoolFromCalculator(true);
public String Message()
return " Calculator - Iterator = " + iterator +"\n" ;
}May i ask your any advice ?
Regards,t00f wrote:
Hi everyone,
I am asking for your help while i am writing an example code. I want to learn how to synchronise two differents objects.Note that you don't "synchronize objects." You synchronize methods or blocks of code on objects (or, more properly I suppose, on their locks). This may seem like a petty distinction, but when you say "synchronize objects," it sounds like you think that you're controlling access to an object. That is not the case. If you need further explanation, let me know. -
Can someone help me move the AM in my program so that it appears under the time. Also, does anyone know how to put zero,s on the clock when you have single digit numbers, e.g 10:01:03 instead of 10:1:3. Thank You!
import java.io.*;
import java.awt.*;
import java.awt.event.*;
import java.util.*;
import javax.swing.JLabel;
class Grid extends Frame
{ static PrintWriter screen = new PrintWriter(System.out,true);
int hours, mins, secs, variable;
Calendar t = Calendar.getInstance();
final long DELAY = 1000;
JLabel timeLabel;
JLabel varLabel;
public Grid()
{ setLayout(new GridLayout(1,3));
hours = t.get(Calendar.HOUR_OF_DAY);
mins = t.get(Calendar.MINUTE);
secs = t.get(Calendar.SECOND);
variable = t.get(Calendar.AM_PM);
if(variable == 0)
varLabel = new JLabel("AM");
else
varLabel = new JLabel("PM");
timeLabel = new JLabel(hours+":"+mins+":"+secs);
this.add(timeLabel);
this.add(varLabel);
private void pause(long DELAY){
try{
Thread.sleep(DELAY);
}catch(InterruptedException ie){System.err.println("Thread.sleep() error)" +ie);}
public void update()
{while(true)
{pause(DELAY);
Calendar c = Calendar.getInstance();
hours = c.get(Calendar.HOUR_OF_DAY);
mins = c.get(Calendar.MINUTE);
secs = c.get(Calendar.SECOND);
variable = c.get(Calendar.AM_PM);
if(variable == 0)
varLabel.setText("AM");
else
varLabel.setText("PM");
timeLabel.setText(hours+":"+mins+":"+secs);
class Clock
{ public static void main(String [] args)
{ Grid g = new Grid();
g.setSize(300, 300);
g.setTitle("Digital Clock");
g.setVisible(true);
g.addWindowListener
(new WindowAdapter()
{public void
windowClosing(WindowEvent e)
{System.exit(0);}
g.update();
}see http://java.sun.com/j2se/1.4.2/docs/api/java/text/NumberFormat.html for information on Number Formatting (alternatively you could simply check if your digit is < 10 and add a 0 manually)
see http://java.sun.com/docs/books/tutorial/uiswing/layout/using.html to learn more about java layout managers (to specify which component should be placed where) -
How do you dispose a thread-handled modal dialog not thru some actions?
The code almost looks like this:
/* Thread that disposes the dialog when the time in seconds is "9" */
class AboutThread extends Thread {
private volatile Thread about;
AboutDialog ad;
AboutThread(AboutDialog ad) {
this.ad = ad;
public void stopped() {
about = null;
ad.dispose();
ad = null;
System.gc();
public synchronized void run() {
Thread thisThread = Thread.currentThread();
about = thisThread;
System.out.println("About thread is running!");
ad.start();
while (about == thisThread) {
try {
Thread.sleep(1000);
} catch (InterruptedException ex) {
System.err.println("Thread.sleep error: " + ex);
String s = new String(getCurrentDateTime("s"));
if (s.equals("9")) {
ad.setVisible(false);
ad.setModal(false);
ad.setVisible(true);
System.out.println(9);
this.stop();
/* Shows a dialog describing the User Log application */
public class AboutDialog extends Dialog implements ActionListener {
public AboutDialog(Frame parent, String title) {
super(parent, title, false);
Panel labelPanel = new Panel();
labelPanel.setLayout(new BorderLayout());
labelPanel.setBackground(Color.gray);
JLabel jlab = new JLabel("User Log 1.0");
jlab.setHorizontalAlignment(SwingConstants.CENTER);
jlab.setFont(new Font("Monospaced", Font.BOLD, 28));
JLabel jlab1 = new JLabel("Copyright(c) 2001 Soft Wares. All Rights Reserved.");
jlab1.setHorizontalAlignment(SwingConstants.CENTER);
labelPanel.add(jlab, "Center");
labelPanel.add(jlab1, "South");
add(labelPanel, "Center");
Panel buttonPanel = new Panel();
buttonPanel.setBackground(Color.gray);
Button okButton = new Button("OK");
okButton.addActionListener(this);
buttonPanel.add(okButton);
add(buttonPanel, "South");
setSize(400, 130);
setLocation(parent.getLocationOnScreen().x + 200,
parent.getLocationOnScreen().y + 200);
public void start() {
show();
public void actionPerformed(ActionEvent e) {
setVisible(false);
dispose();
at.stopped();
}ooops! i'm sorry. in the AboutDialog Class, it should be "super(parent, title, true)" for it to be modal.
anyway, it seemed that posting the partial code above of the whole app is not so understandable.
what i like to address here is that: how do i dispose or get rid of the thread-dispatched modal dialog by not making mouse clicks or any other user intervention? i wanted it to be disposed by the same thread, which dispatched it, when a certain variable value (global or local) is met. is this possible?
Maybe you are looking for
-
Open DNS better than Comcast xfinity DNS?
Is OpenDNS better than using Comcast/xfinity's DNS? If yes, how do I switch over? I go to into Airport Utility and enter in the 2 openDNS numbers, something like 222 and 220, but at the bottom of the page right now (because I am using Comcast's DNS)
-
Infotype 0023 Other/Previous Employer
Good Day Experts I have an important query regarding Infotype 0023 - Other/Previous Employer in Adhoc query [S_PH0_48000510]. When i try to generate the data in IT0023 using Adhoc i cannot generate the data. But if you check all the empoyee in PA20 t
-
My iBook crashes when previewed or after exporting it and sync
Hello, I designed a photography iBook, and added 2 gallery widgets of 20 pics each. My iBook crashes when previewed on my iPad 3 or after exporting it and syncing it to the iPad. It happens after viewing the book and interacting with it. I have seen
-
My apple 3gs wifi not connected modam name displayed but not connected
my iphone 3gs wifi modem name displayed but not connected
-
Hi What does the below mentioned message in >console>DiscRecording.log mean? It is iDVD version 4.0.1 and was beeing transferred via Migration Assistent from 10.3.9 to 10.4.2. I'm not using the app. at the moment and a short check didn't show any pro