MB11 BDC

Hi,
   I had done BDC recording for transaction MB11. It is working fine but I am not able to capture success message when the material document got posted. The message table showing no entries.
  The message table capturing only error messages. How can I capture material document that was created successfully.
CALL TRANSACTION 'MB11' USING bdcdata MODE 'N' UPDATE 'S'
                                MESSAGES INTO g_t_bdcmsg.
Thanks in advance.

hi Dade,
Look at this
CALL TRANSACTION 'MM42' USING it_bdcdata
                            MODE   'N'
                            UPDATE 'A'
                            MESSAGES INTO it_msg.
    COMMIT WORK AND WAIT.
*& populating error msg
    CONCATENATE text-011 wa_output-matnr 'not updated'  "'Article no'
            INTO  e_msg SEPARATED BY space.
*& populating success msg
    CONCATENATE text-011  wa_output-matnr 'updated'  "'Article no'
          INTO  s_msg SEPARATED BY space.
    READ TABLE it_msg INTO wa_msg INDEX 1.
    IF wa_msg-msgtyp = 'E'.
      wa_msg-msgtyp = 'E'.
      wa_msg-msgid   = 'ZMM'.
      wa_msg-msgnr   = '011'.
      wa_msg-msgv1   =  e_msg.
      MOVE wa_msg-msgtyp TO wa_msg1-msgty.
      MOVE wa_msg-msgid  TO wa_msg1-msgid.
      MOVE wa_msg-msgnr  TO wa_msg1-msgno.
      MOVE wa_msg-msgv1  TO wa_msg1-msgv1.
      MOVE lineno TO wa_msg1-lineno.
      APPEND wa_msg1 TO it_msg1.
      CLEAR: wa_msg,wa_msg1.
    ELSEIF wa_msg-msgtyp = 'S'.
      wa_msg-msgtyp = 'S'.
      wa_msg-msgid  = 'ZMM'.
      wa_msg-msgnr  = '011'.
      wa_msg-msgv1  = s_msg.
      MOVE wa_msg-msgtyp TO wa_msg1-msgty.
      MOVE wa_msg-msgid  TO wa_msg1-msgid.
      MOVE wa_msg-msgnr  TO wa_msg1-msgno.
      MOVE wa_msg-msgv1  TO wa_msg1-msgv1.
      MOVE lineno TO wa_msg1-lineno.
      APPEND wa_msg1 TO it_msg1.
      CLEAR: wa_msg,wa_msg1.
    ENDIF.
    REFRESH it_msg.
    CLEAR: wa_output, wa_bdcdata.
    REFRESH it_bdcdata.
  ENDLOOP.
*&-- Fm to show error & success msgs in POP UP
  CALL FUNCTION 'C14Z_MESSAGES_SHOW_AS_POPUP'
    TABLES
      i_message_tab = it_msg1.
  CLEAR: wa_output,it_msg1[].

Similar Messages

  • MB11 BDC upload issue

    hi experts.
    I am using a BDC-UPLOAD program for MB11 but there is one error during an upload.
    Here is a procedure which i am following:
    I have created an upload file, which is tab-delimited format. In which such information exists:
    01.12.2008 12.12.2008 561 d920 m920 536319000 1 PC 100
    Now when i am uploading this file using movement type P61 or 561 a same error occurs:
    Formatting error in the field MSEG-EXBWR ; see next message
    Make an entry in all required fields and this is a required field, its a currency type field but i have even checked it by replacing it into char & num.
    Is there any standard upload program for STOCK UPLOAD using MB11?  If there is any one who can send me a solution.
    thanks in advance.
    Regards,
    Yahya Shoaib.

    Hi,
    For Stock upload I prefer creation of a program by calling Function Module BAPI_GOODSMVT_CREATE. When you use BAPI, as it is being function module you need not do the recording as well. You can test the BAPI also manually in SE37. This simulation helps in passing the data in the feed file. You may contact your ABAPer for creating a program using this  BAPI. You can input the feed file in similar fashion that of BDC

  • Error during MB11 bdc-upload

    hi experts.
    I am using a BDC-UPLOAD program for MB11 but there is one error during an upload.
    Here is a procedure which i am following:
    I have created an upload file, which is tab-delimited format. In which such information exists:
    01.12.2008 12.12.2008 561 d920 m920 536319000 1 PC 100
    Now when i am uploading this file using movement type P61 or 561 a same error occurs:
    Formatting error in the field MSEG-EXBWR ; see next message
    Make an entry in all required fields and this is a required field, its a currency type field but i have even checked it by replacing it into char & num.
    Is there any standard upload program for STOCK UPLOAD using MB11? If there is any one who can send me a solution.
    thanks in advance.
    Regards,
    Yahya Shoaib.

    OK...I think you have declared the internal table field for that value same as the standard table right??
    Now, create a variable with char and then move the value to that char variable and then pass it to the subroutines...
    Ex:
    loop at itab into wa.
    var1 = wa-amount
    perform bdc_field using mseg-exwbr var1.
    endloop.
    Now, I think it will pick up the value.
    VIshwa.

  • Urgent doubt in BDC mb11

    Hi,
    I  am using call transaction MB11 with ref to delivery items. If we do not give any storage location in the delivery,in case of an error i.e insufficient stock of the components,no special error handling has to be in place.the error message of the MB11 transaction should be passed back to the screen.how can i achieve it.
    thanks
    Message was edited by:
            skk

    Hi SKK,
    Please find the logic..
    DATA  : BEGIN OF MESSTAB OCCURS 10000.
               INCLUDE STRUCTURE BDCMSGCOLL.
    DATA  : END OF MESSTAB.
    CALL TRANSACTION 'MB11' USING BDCDATA MODE ZMODE UPDATE 'S'
                                                           messages into MESSTAB.
    Hope this solves your problem.
    Please give points if helpful.
    Thanks.
    Kaleem.

  • Urgent doubt in BDC

    Hi,
        I clling BDC MB11 from Delivery.so,with ref to delivery document the delivery items will placed in MB11.but in case of an error i.e insufficient stock of the components,no special error handliong has to be in place.the error message of the MB11 transaction should be passedback to the screen.how can i achieve it.
    thanks in advance.

    Hi,
    Use FORMAT_MESSAGE Fm to capthuresthe system generated messages.
    Kishore.

  • BDC by screen input not by file

    Dear frinds,
    I want to create a bdc (for changing bin in material) screen by using this user will enter material and storage location  etc... and  can change bin  directly by  input record on screen without using xls or txt file .
    Please provide sample programe for this or related .
    thanks
    Naveen

    >This example is from Anagha Deshmukh  I had to split his post to make it readable.
    For example:
      LOOP AT it_output INTO wa_output.
          REFRESH it_bdcdata.
          PERFORM bdc_dynpro      USING 'SAPMM07M' '0400'.
          PERFORM bdc_field       USING 'BDC_CURSOR'
                                        'RM07M-WERKS'.
          PERFORM bdc_field       USING 'BDC_OKCODE'
                                        '/00'.
          PERFORM bdc_field       USING 'MKPF-BLDAT'
                                        wa_output-doc_date."record-bldat_001.
          PERFORM bdc_field       USING 'MKPF-BUDAT'
                                        wa_output-doc_date."record-budat_002.
          PERFORM bdc_field       USING 'RM07M-BWARTWA'
                                        '551'."record-bwartwa_003.
          PERFORM bdc_field       USING 'RM07M-WERKS'
                                        wa_output-werks."record-werks_004.
          PERFORM bdc_field       USING 'RM07M-LGORT'
                                        wa_output-lgort."record-lgort_005.
          PERFORM bdc_dynpro      USING 'SAPMM07M' '0421'.
          PERFORM bdc_field       USING 'BDC_CURSOR'
                                        'MSEG-CHARG(01)'.
          PERFORM bdc_field       USING 'BDC_OKCODE'
                                        '/00'.
              PERFORM bdc_field       USING w_var1"'MSEG-MATNR(01)'
                                            wa_output-matnr.      "'PH-7001'.
              PERFORM bdc_field       USING w_var2"'MSEG-ERFMG(01)'
                                            w_qty.              " '1'.
              PERFORM bdc_transaction USING 'MB11'.
    ENDLOOP.
    FORM bdc_dynpro  USING program dynpro .
      CLEAR wa_bdcdata.
      wa_bdcdata-program  = program.
      wa_bdcdata-dynpro   = dynpro.
      wa_bdcdata-dynbegin = 'X'.
      APPEND wa_bdcdata TO it_bdcdata.
    ENDFORM.  
    FORM bdc_field  USING fnam fval.
      CLEAR wa_bdcdata.
      wa_bdcdata-fnam = fnam.
      wa_bdcdata-fval = fval.
      APPEND wa_bdcdata TO it_bdcdata.
    ENDFORM.
    FORM bdc_transaction  USING tcode.
      CALL TRANSACTION tcode USING it_bdcdata OPTIONS FROM w_param.
    *                         MODE 'E'
    *                         UPDATE 'S'.
    ENDFORM.

  • BDC code for MB01 Application(Multiple Line Items)

    Hi,
    Can anybody please send me the BDC CODE for MB01 Application(for Multiple Line items).
    Very urgent.
    Thanks And Regards,
    Ajay

    Instead of BDC you can use following BAPI.
    see the following ex:
    BAPI TO Upload Inventory Data
    GMCODE Table T158G - 01 - MB01 - Goods Receipts for Purchase Order
                         02 - MB31 - Goods Receipts for Prod Order
                         03 - MB1A - Goods Issue
                         04 - MB1B - Transfer Posting
                         05 - MB1C - Enter Other Goods Receipt
                         06 - MB11
    Domain: KZBEW - Movement Indicator
         Goods movement w/o reference
    B - Goods movement for purchase order
    F - Goods movement for production order
    L - Goods movement for delivery note
    K - Goods movement for kanban requirement (WM - internal only)
    O - Subsequent adjustment of "material-provided" consumption
    W - Subsequent adjustment of proportion/product unit material
    LOOP AT I_TAB.
          count = sy-tabix.
          SELECT SINGLE * FROM ZMM_GI_WIP
                                    WHERE GI_NO = I_TAB-DOCNO AND
                                    GI_DATE = I_TAB-DOCDT.
          IF SY-SUBRC = 0.
            I_TAB-FLAG = 'C'.
            modify i_tab index count.
            CONCATENATE 'ERROR  GI : ' I_TAB-DOCNO
            '  WAS ALREADY UPLOADED' INTO I_MSG1.
            APPEND I_MSG1.
            CLEAR I_TAB-FLAG.
            CONTINUE.
          ELSE.
            CONCATENATE I_TAB-DOCDT+4(2)
                        I_TAB-DOCDT+6(2)
                        I_TAB-DOCDT+2(2)
                        I_TAB-DOCDT+0(2)
                        INTO G_DATE.
            gmhead-pstng_date = G_DATE.
            gmhead-doc_date = sy-datum.
            gmhead-pr_uname = sy-uname.
    "01 - MB01 - Goods Receipts for Purchase Order
            gmcode-gm_code = '03'.
            refresh itab.
            clear itab.
            SORT I_MAIN BY SOL_DOCNO.
            LOOP AT I_MAIN WHERE DOCNO = I_TAB-DOCNO.
              IF I_MAIN-GI_TXN_TYPE = 'MGI'.
                itab-move_type  = '291'.
              ENDIF.
              itab-mvt_ind    = ' '.
              itab-plant      = I_MAIN-WERKS.
              itab-material   = I_MAIN-MATNR.
              itab-entry_qnt  = I_MAIN-ERFMG.
              itab-stge_loc   = I_MAIN-LGOBE.
              itab-ENTRY_UOM = I_MAIN-ERFME.
              IF I_MAIN-WERKS = 'MR'.
                itab-TR_PART_BA = '11'.
              ELSEIF I_MAIN-WERKS = 'MR'.
                itab-TR_PART_BA = '12'.
              ENDIF.
              append itab.
            ENDLOOP.
            if not itab[] is initial.
              call function 'BAPI_GOODSMVT_CREATE'
               exporting
                   goodsmvt_header             = gmhead
                   goodsmvt_code               = gmcode
                 *   TESTRUN                     = ' '
              IMPORTING
                  goodsmvt_headret            = mthead
             *   MATERIALDOCUMENT            =
      MATDOCUMENTYEAR             =
               tables
                 goodsmvt_item               = itab
      GOODSMVT_SERIALNUMBER       =
                return                      = errmsg.
              clear errflag.
              loop at errmsg.
                if errmsg-type eq 'E'.
                  write:/'Error in function', errmsg-message.
                  errflag = 'X'.
                else.
                  write:/ errmsg-message.
                endif.
                move errmsg-message to i_msg1.
                append i_msg1.
              endloop.
              if errflag is initial.
                CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
              EXPORTING
                WAIT          =
              IMPORTING
                RETURN        =
               commit work and wait.
                if sy-subrc ne 0.
                  write:/ 'Error in updating'.
                  exit.
                 endif.
            endif.
          ENDIF.
           wait up to 20 seconds.
        ENDLOOP.

  • Error while running a BDC for the Transaction F-02

    Hi,
           I'm getting an error <b><i>"Parking not possible during Batch Input"</i></b> while running a BDC for the transaction F-02.
           When i click on the error message it displays the message [b<i>]"In Customizing, you can control whether an error message is issued."</b></i>
            How to solve this issue?.
            Waiting for ur replies.........
    Regards
    N.Senthil

    Hi,
    When you are doing the recording in SHDB, and in the same screen where the TCODE to be recorded is given, there are options that you can choose called "Recording Parameters"...Select the checkbox which says "Not a Batch Input Session", this will set the sy-binpt variable to " "(in a recording by default it is "X")...and you will not get this error...
    Also make sure while writing the BDC program to make use of the "bdc options" parameter which has this property to switch of sy-binpt...
        Refer below theard for sample bdc code for f-02.
    https://forums.sdn.sap.com/click.jspa?searchID=5126766&messageID=1538409
    Regards

  • Unable to update the serial number through bdc in Sales Order

    Hi experts,
    I written the inboud FM for to update the 3rd party items serial number to the sales orders through BDC Call transaction Method.
    Here i am facing a problem when i have the 19 item Quan ,it is updating correct through idoc , when ever there is moe than 19 and at that if any serial number repeated for that if i am changing at that time it is loosing the control of the BDC and giving the control to the salesorder screen.
    how can i handle that control again has to come to BDC prgrm......
    Thnks,
    Regards,
    Bharani

    Hi,
    Can you please let me know the segment in ORDERS05 Idoc to process the Payment card information and if the standard Function Module can handle the creation of a Sales Order with data for Payment Card.
    We have a requirement to map the Tokenized Number of the Credit Card send from a store front end to ECC mapping via SAP-PI.
    Thanks in Advance,

  • MULTIPLE ITEM PROBLEM IN VL31N BDC

    hI FRIENDS ,
        I AM POSTING A BDC OF TRANSACTION VL31N ,ie FOR SCHEDULE AGREEMENT INBOUND DELIVERY.I CREATE A FUNCTIONAL MODULE OF THE SAME AND CALL IT FROM AN ASP PAGE,IN THAT THERE IS PO NUMBER 5500000986 WHICH HAS TWO ITEMES 62 AND 95 RESPECTIVLY OF SAME MATARIAL NUMBER R010230123041002 AND DIE NUMBER 2304P,NOW THE PROBLEM IS THIS BDC IS WORKING WHEN THERE IS ONLY ONE ITEM BUT GIVES AN ERROR "CANT CREAT INBOUND DELIVERY FOR PO NO ...' WNEN IT HAS MULTIPLE ITEM.WHAT SHOULD I DO ? I ALSO USED LOOP BUT IT ALSO DOSENT WORK AS IT WILL ADD ALL OPEN QTY OF PO 986 AND UPDATE AGAINST ITEM NO 95.
    CODE IS AS FOLLOWS:.........
    FUNCTION y_synie_bdcinbdly.
    ""Local interface:
    *"  IMPORTING
    *"     VALUE(CTU) LIKE  APQI-PUTACTIVE DEFAULT 'X'
    *"     VALUE(MODE) LIKE  APQI-PUTACTIVE DEFAULT 'N'
    *"     VALUE(UPDATE) LIKE  APQI-PUTACTIVE DEFAULT 'L'
    *"     VALUE(GROUP) LIKE  APQI-GROUPID OPTIONAL
    *"     VALUE(USER) LIKE  APQI-USERID OPTIONAL
    *"     VALUE(KEEP) LIKE  APQI-QERASE OPTIONAL
    *"     VALUE(HOLDDATE) LIKE  APQI-STARTDATE OPTIONAL
    *"     VALUE(NODATA) LIKE  APQI-PUTACTIVE DEFAULT '/'
    *"     VALUE(EXTNID) LIKE  MAKT-MAKTG
    *"     VALUE(VENDORNO) LIKE  LFA1-LIFNR
    *"     VALUE(PONUMBER) LIKE  EKKO-EBELN
    *"     VALUE(ITEMNUMBER) LIKE  LIPS-VGPOS
    *"     VALUE(MATERIAL) LIKE  MAKT-MAKTG
    *"     VALUE(DLYQTY) LIKE  LIPS-LFIMG
    *"     VALUE(BTCHNO) LIKE  LIPS-CHARG
    *"     VALUE(POSLR) LIKE  EKES-EBELP OPTIONAL
    *"  EXPORTING
    *"     VALUE(SUBRC) LIKE  SYST-SUBRC
    *"     VALUE(INDELYNO) LIKE  SY-MSGV2
    *"     VALUE(MSG1) LIKE  SY-MSGV1
    *"     VALUE(MSG2) LIKE  SY-MSGV2
    *"     VALUE(MSG3) LIKE  SY-MSGV3
    *"     VALUE(MSG4) LIKE  SY-MSGV4
    *"  TABLES
    *"      MESSTAB STRUCTURE  BDCMSGCOLL
    *"      ERRTAB STRUCTURE  YSYNERRMSGS
    *"      INDLYTAB STRUCTURE  YSYN_QTYTAB
    Updated by ANAND SYNISE 19.1.2007
      DATA: BEGIN OF bdctab OCCURS 0.
              INCLUDE STRUCTURE bdcdata.
      DATA: END OF bdctab.
      DATA: datenow(10) TYPE c,
            fldvar(30)  TYPE c,
            fldno       TYPE i,
            flditoc(6)  TYPE c,
            qty(13)     TYPE c.
      DATA maxposnr LIKE lips-posnr.
      DATA testposnr TYPE posnr.
      DATA itemnoint TYPE i.
      CONCATENATE sy-datum6(2) '.' sy-datum4(2) '.' sy-datum+0(4) INTO datenow.
      CLEAR bdctab.
      REFRESH bdctab.
      PERFORM open_group      USING group user keep holddate ctu.
           CLEAR bdctab.
           bdctab-program = 'SAPMV50A'.
           bdctab-dynpro = '4007'.
           bdctab-dynbegin = 'X'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_CURSOR'.
           bdctab-fval = 'RV50A-VERUR_LA'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_OKCODE'.
           bdctab-fval = '/00'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'LIKP-LIFNR'.
           bdctab-fval = vendorno.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'LV50C-BSTNR'.
           bdctab-fval = ponumber.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'RV50A-LFDAT_LA'.
           bdctab-fval = datenow.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'RV50A-LFUHR_LA'.
           bdctab-fval = '00:00'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'RV50A-VERUR_LA'.
           bdctab-fval = extnid.
           APPEND bdctab.
       CLEAR bdctab.
           bdctab-program = 'SAPMV50A'.
           bdctab-dynpro = '1000'.
           bdctab-dynbegin = 'X'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_OKCODE'.
           bdctab-fval = '=MKAL_T'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_SUBSCR'.
           bdctab-fval = 'SAPMV50A'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_CURSOR'.
           bdctab-fval = 'LIKP-BLDAT'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'LIKP-BLDAT'.
           bdctab-fval = datenow.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_SUBSCR'.
           bdctab-fval = 'SAPMV50A'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'RV50A-LFDAT_LA'.
           bdctab-fval = datenow.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'RV50A-LFUHR_LA'.
           bdctab-fval = '00:00'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_SUBSCR'.
           bdctab-fval = 'SAPMV50A'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_SUBSCR'.
           bdctab-fval = 'SAPMV50A'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-program = 'SAPMV50A'.
           bdctab-dynpro = '1000'.
           bdctab-dynbegin = 'X'.
           APPEND bdctab.
       CLEAR bdctab.
           bdctab-fnam = 'BDC_OKCODE'.
           bdctab-fval = '=POPO_T'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_SUBSCR'.
           bdctab-fval = 'SAPMV50A'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'LIKP-BLDAT'.
           bdctab-fval = datenow.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_SUBSCR'.
           bdctab-fval = 'SAPMV50A'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_CURSOR'.
           bdctab-fval = 'LIPS-POSNR(01)'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'RV50A-LFDAT_LA'.
           bdctab-fval = datenow.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'RV50A-LFUHR_LA'.
           bdctab-fval = '00:00'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_SUBSCR'.
           bdctab-fval = 'SAPMV50A'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_SUBSCR'.
           bdctab-fval = 'SAPMV50A'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-program = 'SAPMV50A'.
           bdctab-dynpro = '0111'.
           bdctab-dynbegin = 'X'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_CURSOR'.
           bdctab-fval = 'RV50A-PO_MATNR'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_OKCODE'.
           bdctab-fval = 'WEIT'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'RV50A-PO_MATNR'.
           bdctab-fval = material.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-program = 'SAPMV50A'.
           bdctab-dynpro = '1000'.
           bdctab-dynbegin = 'X'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_OKCODE'.
           bdctab-fval = '=POLO_T'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_SUBSCR'.
           bdctab-fval = 'SAPMV50A'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'LIKP-BLDAT'.
           bdctab-fval = datenow.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_SUBSCR'.
           bdctab-fval = 'SAPMV50A'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_CURSOR'.
           bdctab-fval = 'LIPS-POSNR(01)'.
           APPEND bdctab.
    *ADDED BY ANAND ON 22-01-2007
           CLEAR bdctab.
           bdctab-fnam = 'BDC_CURSOR'.
           bdctab-fval =  ITEMNUMBER .     "ITEMNUMBER = LIPS-VGPOS
           APPEND bdctab.
    ************ENDED***********************
    ADDED BY MILIND 19.01.2007
           CLEAR bdctab.
           bdctab-fnam = 'BDC_CURSOR'.
           bdctab-fval =  poslr .
           APPEND bdctab.
    *    ENDED * *
       CLEAR bdctab.
           bdctab-fnam = 'RV50A-LFDAT_LA'.
           bdctab-fval = datenow.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'RV50A-LFUHR_LA'.
           bdctab-fval = '00:00'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'RV50A-LIPS_SELKZ(01)'.
           bdctab-fval = ''.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_SUBSCR'.
           bdctab-fval = 'SAPMV50A'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_SUBSCR'.
           bdctab-fval = 'SAPMV50A'.
           APPEND bdctab.
       CLEAR bdctab.
           bdctab-program = 'SAPMV50A'.
           bdctab-dynpro = '1000'.
           bdctab-dynbegin = 'X'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_OKCODE'.
           bdctab-fval = '/00'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_SUBSCR'.
           bdctab-fval = 'SAPMV50A'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'LIKP-BLDAT'.
           bdctab-fval = datenow.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_SUBSCR'.
           bdctab-fval = 'SAPMV50A'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_CURSOR'.
           bdctab-fval = 'LIPS-CHARG(01)'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'RV50A-LFDAT_LA'.
           bdctab-fval = datenow.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'RV50A-LFUHR_LA'.
           bdctab-fval = '00:00'.
           APPEND bdctab.
           CLEAR bdctab.
          QTY = INDLYTAB-DLYQTY.
            qty = dlyqty.
           bdctab-fnam = 'LIPSD-G_LFIMG(01)'.
           bdctab-fval = QTY.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'LIPS-CHARG(01)'.
    *     BDCTAB-FVAL = INDLYTAB-BTCHNO.
           bdctab-fval = btchno.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_SUBSCR'.
           bdctab-fval = 'SAPMV50A'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_SUBSCR'.
           bdctab-fval = 'SAPMV50A'.
           APPEND bdctab.
       CLEAR bdctab.
           bdctab-program = 'SAPMV50A'.
           bdctab-dynpro = '1000'.
           bdctab-dynbegin = 'X'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_OKCODE'.
           bdctab-fval = '=SICH_T'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_SUBSCR'.
           bdctab-fval = 'SAPMV50A'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'LIKP-BLDAT'.
           bdctab-fval = datenow.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_SUBSCR'.
           bdctab-fval = 'SAPMV50A'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_CURSOR'.
           bdctab-fval = 'LIPS-MATNR(02)'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'RV50A-LFDAT_LA'.
           bdctab-fval = datenow.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'RV50A-LFUHR_LA'.
           bdctab-fval = '00:00'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_SUBSCR'.
           bdctab-fval = 'SAPMV50A'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_SUBSCR'.
           bdctab-fval = 'SAPMV50A'.
           APPEND bdctab.
      CALL TRANSACTION 'VL31N' USING bdctab MODE 'N'  MESSAGES INTO messtab.
      subrc = sy-subrc.
      PERFORM close_group USING     ctu.
      CLEAR bdctab.
      REFRESH bdctab.
      IF sy-subrc EQ 0.
        indelyno = sy-msgv2.
      ENDIF.
      LOOP AT messtab.
        MOVE: messtab-msgid TO errtab-msgid,
              messtab-msgnr TO errtab-msgnr,
              messtab-msgv1 TO errtab-msg1,
              messtab-msgv2 TO errtab-msg2,
              messtab-msgv3 TO errtab-msg3,
              messtab-msgv4 TO errtab-msg4.
        APPEND ERRtab.
      ENDLOOP.
      LOOP AT errtab.
        SELECT SINGLE text FROM t100
          INTO errtab-errmsg
          WHERE msgnr EQ errtab-msgnr AND arbgb EQ errtab-msgid
          AND sprsl EQ sy-langu.
        MODIFY errtab.
      ENDLOOP.
    ENDFUNCTION.

    Hi,
    Check this code:
    REPORT Z_CUSTOMER_UPLOAD .
                  D A T A         D E C L A R A T I O N S                *
    DATA:BEGIN OF IT_CUSTOMER OCCURS 0,
         KUNNR LIKE MV10A-KUNNR,
         VKORG LIKE MV10A-VKORG,
         VTWEG LIKE MV10A-VTWEG,
         MATNR LIKE MV10A-MATNR,
         KDMAT LIKE MV10A-KDMAT,
         MEGRU LIKE MV10A-MEGRU,
         SELKZ TYPE C value 'X',
         LPRIO LIKE MV10A-LPRIO,
         ANTLF LIKE MV10A-ANTLF,
         END OF IT_CUSTOMER.
    DATA:BEGIN OF IT_success OCCURS 0,
         KUNNR LIKE MV10A-KUNNR,
         VKORG LIKE MV10A-VKORG,
         VTWEG LIKE MV10A-VTWEG,
         MATNR LIKE MV10A-MATNR,
         KDMAT LIKE MV10A-KDMAT,
         MEGRU LIKE MV10A-MEGRU,
         SELKZ TYPE C value 'X',
         LPRIO LIKE MV10A-LPRIO,
         ANTLF LIKE MV10A-ANTLF,
         END OF IT_success.
    DATA:BEGIN OF IT_error OCCURS 0,
         KUNNR LIKE MV10A-KUNNR,
         VKORG LIKE MV10A-VKORG,
         VTWEG LIKE MV10A-VTWEG,
         MATNR LIKE MV10A-MATNR,
         KDMAT LIKE MV10A-KDMAT,
         MEGRU LIKE MV10A-MEGRU,
         SELKZ TYPE C value 'X',
         LPRIO LIKE MV10A-LPRIO,
         ANTLF LIKE MV10A-ANTLF,
         END OF IT_error.
    DATA: L_INDEX TYPE SY-TABIX.
    DATA:IT_BDC LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
    IT_DATA TYPE ALSMEX_TABLINE OCCURS 0 WITH HEADER LINE.
    ERROR MESSAGE TABLE
    DATA:IT_MESSAGES LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
    DATA : C_S TYPE C VALUE 'S',
            C_E TYPE C VALUE 'E'.
    *DATA: IT_SUCCESS LIKE IT_CUSTOMER OCCURS 0,
         IT_ERROR LIKE IT_CUSTOMER  OCCURS 0.
    DATA : V_RECTOT TYPE I,
            V_RECERR TYPE I,
            V_RECSUC TYPE I.
                  S E L E C T I O N  -  S C R E E N                      *
    SELECTION-SCREEN : BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
    PARAMETER        : P_FILE LIKE RLGRAP-FILENAME .
    SELECTION-SCREEN : END OF BLOCK B1.
               A T  S E L E C T I O N  -  S C R E E N                    *
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
    to get F4 help for p_file
      PERFORM F4_FILENAME USING P_FILE.
                S T A R T   O F   S E L E C T I O N                      *
    START-OF-SELECTION.
    Uploading data from flat file into it_tab
      PERFORM BDC_UPLOAD USING P_FILE.
      PERFORM PROCESS_DATA.
      PERFORM POPULATE_BDC.
                E N D  O F   S E L E C T I O N                           *
    *END-OF-SELECTION.
    PERFORM DISPLAY_REPORT.
    *&      Form  F4_FILENAME
          text
         -->P_P_FILE  text
    FORM F4_FILENAME USING    P_P_FILE.
    DATA:L_FILE TYPE IBIPPARMS-PATH.
    CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      PROGRAM_NAME        = SYST-CPROG
      DYNPRO_NUMBER       = SYST-DYNNR
      FIELD_NAME          = ' '
    IMPORTING
       FILE_NAME           = L_FILE .
       P_P_FILE = L_FILE.
    ENDFORM.                    " F4_FILENAME
    *&      Form  BDC_UPLOAD
          text
         -->P_P_FILE  text
    FORM BDC_UPLOAD USING    P_P_FILE.
    CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
      EXPORTING
        FILENAME                      = P_P_FILE
        I_BEGIN_COL                   = 1
        I_BEGIN_ROW                   = 1
        I_END_COL                     = 8
        I_END_ROW                     = 1000
      TABLES
        INTERN                        = IT_DATA
    EXCEPTIONS
       INCONSISTENT_PARAMETERS       = 1
       UPLOAD_OLE                    = 2
       OTHERS                        = 3
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    ENDFORM.                    " BDC_UPLOAD
    *&      Form  PROCESS_DATA
          text
    -->  p1        text
    <--  p2        text
    FORM PROCESS_DATA.
    SORT IT_DATA BY ROW COL.
      LOOP AT IT_DATA.
    CASE IT_DATA-COL.
    WHEN 1.
    IT_CUSTOMER-KUNNR   = IT_DATA-VALUE.
    WHEN 2.
    IT_CUSTOMER-VKORG   = IT_DATA-VALUE.
    WHEN 3.
    IT_CUSTOMER-VTWEG   = IT_DATA-VALUE.
    WHEN 4.
    IT_CUSTOMER-MATNR   = IT_DATA-VALUE.
    WHEN 5.
    IT_CUSTOMER-KDMAT   = IT_DATA-VALUE.
    WHEN 6.
    IT_CUSTOMER-MEGRU   = IT_DATA-VALUE.
    WHEN 7.
    IT_CUSTOMER-LPRIO   = IT_DATA-VALUE.
    WHEN 8.
    IT_CUSTOMER-ANTLF   = IT_DATA-VALUE.
    APPEND IT_CUSTOMER.
        ENDCASE.
      ENDLOOP.
    ENDFORM.                    " PROCESS_DATA
    *&      Form  POPULATE_BDC
          text
    -->  p1        text
    <--  p2        text
    FORM POPULATE_BDC.
    DATA:L_COUNTER TYPE N,
             L_STRING TYPE STRING.
    LOOP AT IT_CUSTOMER.
    AT NEW KUNNR.
    CLEAR L_COUNTER.
          L_INDEX = SY-TABIX.
          READ TABLE IT_CUSTOMER INDEX L_INDEX.
    perform bdc_dynpro      using 'SAPMV10A' '0100'.
    perform bdc_field       using 'MV10A-KUNNR'
                                  IT_CUSTOMER-KUNNR.
    perform bdc_field       using 'MV10A-VKORG'
                                  IT_CUSTOMER-VKORG.
    perform bdc_field       using 'MV10A-VTWEG'
                                  IT_CUSTOMER-VTWEG.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    ENDAT.
    L_COUNTER = L_COUNTER + 1.
        CLEAR L_STRING.
    perform bdc_dynpro      using 'SAPMV10A' '0200'.
    CONCATENATE 'MV10A-MATNR(' L_COUNTER ')' INTO L_STRING.
    perform bdc_field       using L_STRING
                            IT_CUSTOMER-MATNR.
    CONCATENATE 'MV10A-KDMAT(' L_COUNTER ')' INTO L_STRING.
    perform bdc_field       using     L_STRING
                                     IT_CUSTOMER-KDMAT.
    CONCATENATE 'MV10A-MEGRU(' L_COUNTER ')' INTO L_STRING.
    perform bdc_field       using   L_STRING
                                    IT_CUSTOMER-MEGRU.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    *-- For Page down in Call Transaction Mode
        IF L_COUNTER = 14.
          CLEAR L_COUNTER.
          PERFORM BDC_DYNPRO      USING 'SAPMV45A' '4001'.
          PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                                '=P+'.
        ENDIF.
    perform bdc_dynpro      using 'SAPMV10A' '0200'.
    CONCATENATE 'MV10A-SELKZ(' L_COUNTER ')' INTO L_STRING.
    perform bdc_field       using L_STRING
                              IT_CUSTOMER-SELKZ.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=SELE'.
    perform bdc_dynpro      using 'SAPMV10A' '0300'.
    perform bdc_field       using 'MV10A-KDMAT'
                                  IT_CUSTOMER-KDMAT.
    perform bdc_field       using 'MV10A-LPRIO'
                                  IT_CUSTOMER-LPRIO.
    perform bdc_field       using 'MV10A-ANTLF'
                                  IT_CUSTOMER-ANTLF.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                        '/EBACK'.
    at end of kunnr.
    READ TABLE IT_CUSTOMER INDEX L_INDEX.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=SICH'.
    CALL TRANSACTION 'VD51' USING IT_BDC MODE 'A' UPDATE 'S'
          MESSAGES INTO IT_MESSAGES.
          CLEAR IT_BDC.
          REFRESH IT_BDC.
    ENDAT.
      IF NOT IT_MESSAGES[] IS INITIAL.
        PERFORM FORMAT_MESSAGE.
      ENDIF.
    ENDLOOP.
    ENDFORM.                    " POPULATE_BDC
    *&      Form  bdc_dynpro
          text
         -->P_0273   text
         -->P_0274   text
    FORM bdc_dynpro USING    VALUE(P_0273)
                             VALUE(P_0274).
    IT_BDC-PROGRAM = P_0273.
    IT_BDC-DYNPRO = P_0274.
    IT_BDC-DYNBEGIN = 'X'.
      APPEND IT_BDC.
      CLEAR IT_BDC.
    ENDFORM.                    " bdc_dynpro
    *&      Form  bdc_field
          text
         -->P_0278   text
         -->P_RECORD_KUNNR_001  text
    FORM bdc_field USING    VALUE(P_0278)
                           VALUE(P_0279).
    IT_BDC-FNAM = P_0278.
      IT_BDC-FVAL = P_0279.
      APPEND IT_BDC.
      CLEAR IT_BDC.
    ENDFORM.                    " bdc_field
    *&      Form  FORMAT_MESSAGE
          text
    -->  p1        text
    <--  p2        text
    FORM FORMAT_MESSAGE.
    DATA: L_MSG(100).
      LOOP AT IT_MESSAGES.
      READ TABLE IT_CUSTOMER INDEX L_INDEX.
        CALL FUNCTION 'FORMAT_MESSAGE'
             EXPORTING
                  ID        = IT_MESSAGES-MSGID
                  LANG      = SY-LANGU
                  NO        = IT_MESSAGES-MSGNR
                  V1        = IT_MESSAGES-MSGV1
                  V2        = IT_MESSAGES-MSGV2
                  V3        = IT_MESSAGES-MSGV3
                  V4        = IT_MESSAGES-MSGV4
             IMPORTING
                  MSG       = L_MSG
             EXCEPTIONS
                  NOT_FOUND = 1
                  OTHERS    = 2.
        IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
        write:/ l_msg.
      ENDLOOP.
    ENDFORM.                    " FORMAT_MESSAGE
    reward if helpful,
    keerthi

  • Creation of PGI using BDC for tc VL02N is not happening..

    Hi All,
    i need to do Post Goods Issue (PGI) thro' BDC and after that i need to update the flag in Ztable.
    its giving Success message and updating the database also.
    but its not issuing the PGI.and further i want to create billing doc.So its compulsory to me to post PGI.
    if i look into the BDCMSGCOLL structure its giving "NO BATCH INPUT DATA FOR SCREEN"? why this is happening?
    please let me know immediately....
    REFRESH: tt_bdcmsgcoll .
      CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
        EXPORTING
          input  = wa_created-document_numb
        IMPORTING
          output = wa_created-document_numb.
      REFRESH tt_bdcdata.
      PERFORM bdc_dynpro      USING text-001 text-002.
      PERFORM bdc_field       USING text-008
                                   text-014.
      PERFORM bdc_field       USING text-009
                                    text-011.
      PERFORM bdc_field       USING text-014
                                    wa_created-document_numb.
      PERFORM bdc_dynpro      USING text-001 text-003.
      PERFORM bdc_field       USING text-009
                                    text-036.
      PERFORM bdc_field       USING text-025
                                    sy-datum.
      PERFORM bdc_field       USING text-008
                                    text-035.
      PERFORM bdc_field       USING text-037
                                    sy-datum.
      PERFORM bdc_field       USING text-038
                                    text-029.
      PERFORM bdc_field       USING text-016
                                    c_x.
      CALL TRANSACTION c_t_del USING tt_bdcdata
                                    MODE c_m
                                    UPDATE c_u
                                    MESSAGES INTO tt_bdcmsgcoll .
      SORT tt_bdcmsgcoll BY msgtyp.
      READ TABLE tt_bdcmsgcoll INTO wa_bdcmsgcoll WITH KEY msgtyp = c_e.
      IF sy-subrc EQ 0.
        LOOP AT tt_bdcmsgcoll INTO wa_bdcmsgcoll WHERE msgtyp = c_e.
          CALL FUNCTION 'FORMAT_MESSAGE'
            EXPORTING
              id        = wa_bdcmsgcoll-msgid
              lang      = text-010
              no        = wa_bdcmsgcoll-msgnr
              v1        = wa_bdcmsgcoll-msgv1
              v2        = wa_bdcmsgcoll-msgv2
              v3        = wa_bdcmsgcoll-msgv3
              v4        = wa_bdcmsgcoll-msgv4
            IMPORTING
              msg       = v_msg
            EXCEPTIONS
              not_found = 1
              OTHERS    = 2.
          IF sy-subrc <> 0.
          ENDIF.
          WRITE :/ v_msg.
        ENDLOOP.
      ELSE.
        MOVE : c_x TO wa_worklist-pgi_flag.
        READ TABLE tt_epit INTO wa_epit WITH KEY epi_id = wa_worklist-epi_id epi_sr = wa_worklist-epi_sr.
        IF sy-subrc EQ  0.
          MODIFY tt_epit FROM wa_worklist TRANSPORTING pgi_flag WHERE epi_id = wa_worklist-epi_id AND epi_sr = wa_worklist-epi_sr.
        ELSE.
          APPEND wa_worklist TO tt_epit.
        ENDIF.
         wa_epit-pgi_flag = c_x.
         MODIFY   tt_epit FROM wa_epit TRANSPORTING pgi_flag WHERE epi_id = wa_worklist-epi_id AND del_no = wa_created-document_numb .
         UPDATE zsd_dt_epit SET pgi_flag = 'X' WHERE epi_id = wa_worklist-epi_id AND del_no = wa_created-document_numb .
         IF  sy-subrc EQ 0.
         ENDIF.
      ENDIF.

    HI,
    Please refer this
    To perform Post goods issue
        PERFORM OPEN_GROUP.
        PERFORM BDC_DYNPRO      USING 'SAPMV50A' '4004'.
        PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                      'LIKP-VBELN'.
        PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                      '=WABU_T'.
        PERFORM BDC_FIELD       USING 'LIKP-VBELN' DELIVERY.
                                 '84000064'.
        PERFORM BDC_TRANSACTION USING 'VL02N'.
        PERFORM CLOSE_GROUP.
        CLEAR : DELIVERY,
                T_BSITEM,
                T_BSICTL.
      ENDIF.
    ENDFORM.                    " DELIVERY

  • Problem in creation of BDC for transaction phap_create

    Hello Friends,
    I am trying to create BDC for PHAP_CREATE.
    When you run a transaction a pop up window appears to select the template id.
    And in BDC it is selected by cursor position. So once selected, the value of template id cannot be changed.
    I want this as a parameter.So that each time I run a BDC I will be able to create different types of Appraisal documents i.e with different template ids.
    How to go about it???
    Regards,
    Bhushan

    Hi,
    For selecting the id, while doing recording,
    record with
    CTRL + F ( Where u can give ur id) and proceed further.

  • Help needed in BDC

    Dear Experts,
    I have a module pool program and transaction for shipping advice, where I have given a option that if user enters Sales Order in the selection screen and in the next screen it shows all the related infromation of that order and if needed user can edit few fields in this screen and can take print.
    Now for the same report I dont want to show any screen to user after user enters the order and executes directly it should display the dialog box for 'Print' and 'Print Preview'.
    I did BDC recording for the transaction of shipping adive report and with that code I have developed other program and if run this program in foreground (Mode "A")it will show all screens with that dialog screen for 'Print' also but if I run in background (Mode "B") it will not show any screen and it will print the document directly.
    Now my requirement is I have to show only dialog screen for 'Print' & 'Print Preview'.
    Please give me your valuable Ideas on how to achieve this...
    Thanks in advance.
    Best Regards
    Venkat

    Hello,
    May be you are not using the full recording or might have some mistake(s) is going on in the completion of recording that is why it is creating problem. And also please check the call transaction code in the BDC program, whether you are performing the accurate t-code with that or not and also perform BDC functions also. If it is right than it would not might have any problem regarding the required output as you want.
    Thanks & Regards,
    Akg

  • What is the Tcodes for Uploading of data using BDC & CATT

    PP members:
    I was going through the <b>cutover activities</b> ,  and what I understood is  we transfer all the legacy system data into SAP before going live
    The data upload follows certain steps (depends on the organizational design load strategies)
    First we upload all the master data ( material master, BOM, W/C's & Routings)
    Then the transaction data ( Ideally speaking, there should no open orders i.e. WIP as on the day of cutoff )
    If the WIP (Work in Process) is unavoidable then the materials consumed shall be treated as <b>materials of the previous stage</b> and necessary adjustments shall be made after cutover day
    At this point, I could not able to understand what does the author mean <b>materials of the previous stage</b>
    Now comming to the uploading of data into SAP from legacy system, we use tools like LSMW, CATT & BDC
    Is it a must to use <b>only LSMW tool</b> to upload master data or any other upload tools are fine
    Lastly,. I am not sure about the Tcode of CATT & BDC
    Summary of the questions:
    1.What does the author mean  <b>material of previous stage</b>, for WIP materials during cutover activities
    2. Is it mandatory to use only LSMW tool for uploading for master data
    3. What are the Tcodes for upload tools CATT & BDC ?
    Thanks for your time
    Suren R

    Dear,
    1.What does the author mean material of previous stage, for WIP materials during cutover activities - as i understood, what is the stage of material..like it must have gone through 2 work centers and other 2 is left. i.e. you need to create Production order with only 2 operation as other 2 is already over. - usually it is done in such a way that we will create Production order and confirm till 2 operations and WIp is calculated so thatb FI will tally the books in SAP and lagacy.
    2. Is it mandatory to use only LSMW tool for uploading for master data - no you can use any tool as required and suits yr requirement
    3. What are the Tcodes for upload tools CATT & BDC- BDC through a prog in SE38. CATT through - SCEM.

  • Unable to capture sy-ucomm in BDC

         Hello Everyone, 
    I have created a BDC for CG3Y everything is working fine after creating a log when sy-subrc eq 0. when user hits SAVE I have given a message stating 'LOG HAS BEEN GENERATED' but when the pop for overwrite appears and I hit NO, it should give a different message for that i am not able to capture SY-UCOMM.
    please help.

    Actually the issue was just had to get the file(Error log) from Application Server to Presentation, Here is the code for it.
    data: i_fl_openerror type boolean,
    i_os_message(100) type C,
    i_flg_continue type boolean.
    CALL FUNCTION 'C13Z_FILE_DOWNLOAD_ASCII'
    EXPORTING
    i_file_front_end          = 'C:\ERROR_LOG.XLS'
    i_file_appl               = '/USR/SAP/TMP/FILE3.XLS'
    *   I_FILE_OVERWRITE          = ESP1_FALSE
    IMPORTING
    E_FLG_OPEN_ERROR          = i_fl_openerror
    E_OS_MESSAGE              = i_os_message
    EXCEPTIONS
    FE_FILE_OPEN_ERROR        = 1
    FE_FILE_EXISTS            = 2
    FE_FILE_WRITE_ERROR       = 3
    AP_NO_AUTHORITY           = 4
    AP_FILE_OPEN_ERROR        = 5
    AP_FILE_EMPTY             = 6
    OTHERS                    = 7
    IF sy-subrc <> 0.
    case sy-subrc.
    when 2.
    CALL FUNCTION 'C14A_POPUP_ASK_FILE_OVERWRITE'
    IMPORTING
    E_FLG_CONTINUE       = i_flg_continue
    if i_flg_continue eq true.
    CALL FUNCTION 'C13Z_FILE_DOWNLOAD_ASCII'
    EXPORTING
    i_file_front_end          = 'C:\ERROR_LOG.XLS'
    i_file_appl               = '/USR/SAP/TMP/FILE3.XLS'
    I_FILE_OVERWRITE          = ESP1_TRUE
    IMPORTING
    E_FLG_OPEN_ERROR          = i_fl_openerror
    E_OS_MESSAGE              = i_os_message
    EXCEPTIONS
    FE_FILE_OPEN_ERROR        = 1
    FE_FILE_EXISTS            = 2
    FE_FILE_WRITE_ERROR       = 3
    AP_NO_AUTHORITY           = 4
    AP_FILE_OPEN_ERROR        = 5
    AP_FILE_EMPTY             = 6
    OTHERS                    = 7
    IF sy-subrc <> 0.
    write : / 'CANNOT DOWNLOAD' , '/USR/SAP/TMP/FILE3.XLS' .
    else.
    write : / 'LOG HAS BEEN GENERATED C:\ERROR_LOG.XLS'.
    endif.
    else.
    write : / 'LOG NOT GENERATED'.
    endif.
    when others .
    write : / 'CANNOT DOWNLOAD FILE1', '/USR/SAP/TMP/FILE3.XLS'.
    endcase.

Maybe you are looking for

  • Replicate Non-standard lookup data from R3 to MDM

    Hi MDM Experts, I am having a scenario like i want to replicate the reference data(Lookup table data) from R3 System to MDM System. For that i can use the transaction "MDMGX" but in this we can replicate for standard lookup table data which has been

  • Personalization Server and DBMS

    Hi, Have someone tried to install the Personalization Server with container managed persistence (cmp) in another DB than Cloudscape ??? Can the Personalization Server be installed with Oracle and cmp ? And for instance MS SQL Server ? Thanks in advan

  • Ascending Order in Data Level

    Hi Friends, I have a table xxx and it has two columns col1 and col2 and below is the data for these columns. Col1 Col2 111 5,6,9,2,1 211 10,12,8,9 311 6,7,8,1,2,3,4 Below is the required output; Col1 Col2 111 1,2,5,6,9 211 8,9,10,12 311 1,2,3,4,6,7,8

  • PCUI - Multiple Selection at Position 2 (Details Area 1 onwards)

    hi, Is it possible to select more than one records on a list appearing in the "Detail area 1"? I was not able to find a list functionality with multiple selection for anything other than result list. Is there a way we can simulate the multiple select

  • Form fields rotate after copying/pasting

    Hello all, my first post to the forums. I created a form template in Word/Mac, saved as PDF and brought into Acrobat 8 Pro/Mac to add form fields. Now I want to replace one of the underlying pages. Whenever I replace the page, all the form fields rot