MB13,HDD WD BLUE it was incorrectly defined as by 7200 instead of 5400

ahhh I see what you mean. the model you ordered is a 5400 rpm hdd but is showing as 7200 rpm..I misunderstood. I am as confused as you are

Similar Messages

Logical file name or logical path name incorrectly defined

Dear All,
We are doing archival in our IDES for test purpose before we do it to our Production.
Steps Performed
Copied AM_ASSET archive object to ZAM_ASSET
Logical Path
Logical path    ZAM_ASSET
Name            Asset
Syntax group    UNIX       Unix compatible
Physical path   /archive/test/<FILENAME>
Logical File Name
   Logical file    ZAMASSET
   Name            Asset
   Physical file   FI_<MONTH>_<DAY>.txt
   Data format     ASC
   Applicat.area   AM
   Logical path    ZAM_ASSET
But when we run the WRITE though SARA , in the job log we get the following
Logical file name or logical path name incorrectly defined
When generating a file name for an archive file that is to be created, the system determined that the logical file name FIAA_ARCHIVE_DATA_FILE or the logical path name ARCHIVE_GLOBAL_PATH was defined incorrectly.
But we have maintained a Logical name ZAMASSET , so we are unable to change the location of archived file and as well as the format.
So is there any setting we need to maintain apart from the logical file name and logical file path.
Suggestions are highly appreciated.
Thanks in anticipation

hi,
follow this steps :
- transaction SARA
- enter authorization objects, eg SD_VBAK
- hit button CUSTOMIZING
- Archiving Object-Specific Customizing: execute Technical Setting
- field Logical File Name enter or select ARCHIVE_DATA_FILE
- leave CONTENT REPOSITORY as blank if you are not using 3rd party for storing (eg. IBM Tivoli)
- back to customizing
- from Basis Customizing, execute : Cross-Client File Names/Paths
- on Logical FIle Path Definition, highlight (select) ARCHIVE_GLOBAL_PATH on the right pane
- double click on the Assignment of Physical Paths to Logical Path on the left pane
- double click on OS used, eg. UNIX, define Physical Path where archive file (on WRITE process) will be stored
- save changes made
- double click Logical File Definition, Cross Client on the left pane
- double click ARCHIVE_DATA_FILE on the right pane
- make sure that logical path is already set to ARCHIVE_GLOBAL_PATH
- save changes made
this setting also can be done using transaction FILE
we have experienced on this case using SAP standard archiving (SARA, SARI) and everything is fine with this setting above.
hope it help you.
rgds,
Alfonsus Guritno

Starting Stream Analtyics says output was not defined in query

I get the following error when starting my streaming analytics setup:
Stream Analytics job has validation errors: The output output used in the query was not defined. Activity Id: 'c0d50509-a2a9-4a8c-846d-5bf01b751344-2015-04-18 22:37:42Z'.
What does this error mean? And more importantly, how can I fix this?
I found some reference material using the "INTO" statement in the query, however this doesn't work for me and indicated that me query is incorrect. So I guess this function is obsolete?

The likely cause of this error is that you do not an output with the default name defined for your job.
If your SQL query does not use a named output, that is it does not use the INTO keyword that it is expected that you have a default output defined for the job (with name "output"). The error message does not tell you that clearly and that is a
bug we will work on fixing.
If your SQL query does use the INTO keyword, then you simply need to use the same name of the output as you have defined for your job. If you are running into an issue making that work please let us know.
Thanks
Zafar Abbas

I changed my iPhone lately but i can't restore my last backup since it keeps saying "itunes could not restore backup because the password was incorrect" but I don't know where to put the password to make it happen... Any suggestions?

Hey guys,
I just bought a new iPhone but i can't restore my backup files beacuse it keeps saying "itunes could not restore backup because the password was incorrect" but I really don't know where to put the password to restore it. I really have some files that are meaningful for me so I really need help. Any suggestions anyone?

Select your iDevice in the iTunes.
Choose the Summary screen (tab) and scroll to the bottom of the screen.
Then un-select Encrypt iPhone backup.
iTunes will then prompt you to “Enter the password to unlock your iPhone backup”, enter the password you set originally.

"itunes could not restore the iphone because the password was incorrect" I know for a fact im using the correct password. and it has previously worked. is anyone else having this issue.

"itunes could not restore the iphone because the password was incorrect" I know for a fact im using the correct password. and it has previously worked. is anyone else having this issue.

Hi, I also get the message "itunes could not restore the iphone because the password was incorrect" though I am never prompted to enter a password anywhere! Nor was the backup password encrypted to begin with! Really strange, any pointers will be greatly appriciated!

I have changed my password and still can't get homesharing to work. Get the message "Homesharing could not be activated because the account or password was incorrect. It's what I have used to sign in here!

I have changed my password and still can't get home sharing to work. Get the message "Home sharing could not be activated because the account or password was incorrect." It's what I have used to sign in here! Any help much appreciated.

So I reset my Apple ID password. Which then stopped my MobileMe account from working. Hang on - these were 2 different accounts a while ago, with different passwords!!!
So I have logged back in to MobileMe with my AppleID, and that's working again. After a short wait I can now create Home Sharing again.
Folks, I think we have just had our Apple IDs merged with our MobileMe accounts!! With no consultation or warning.
My guess is that this is the most seamless way for Apple to do it, as the vast majority of people use only one email address and one password for everything. Only those of us who had the same email adress but different a different passwords for MobileMe and Apple ID will have noticed. Annoying for us few, but a clever strategy on Apple's part, becasue we have been driven to fix the issue ourselves by chaning the password, and in doing so we have realised that our mobileme account is now the same thing as our Apple ID.

HT5538 Every time I try to use apple ID for face time I got an error message "the username or password was incorrect" although they are right and I use them in App Store and I cloud even after resetting my password

Every time I try to use apple ID for face time I got an error message "the username or password was incorrect" although they are right and I use them in App Store and I cloud even after resetting my password, the problem happens also with iMessage . Please help

For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa

[nQSError: 15018] Incorrectly defined logical table source

Hi,
I have two fact tables and a type dimension.
business model / physical
fact1 /fact1
fact2 /fact2
type /type
now I have them joined up on the physical layer with foreign keys AND on the business model layer.
Nevertheless I still get this error whenever I mix and match the columns.
[nQSError: 10058] A general error has occurred. (for fact table WABFact) does not contain mapping for [Dates.FLIGHTDATE [ ] ]. (HY000)

Hi,
The error "Incorrectly defined logical table source (for fact table XXX) does not contain mapping for YYY" means that the BI Server cannot reach from table XXX to table YYY. It can happen because of two reasons: The first one is that there are no relationships defined in the logical or the physical layers (or maybe both). Note that the connections can be indirect. The second one is that the relationships doesn't makes sense. For example, going from a fact table to a dimension table through many-to-many table cannot happen. You'll see this error many times as a beginner and it can be quite frustrating at first. You need to understand that the BI Server can only understand simple and classic star schemas. More complex ERDs need to be split by using alias tables.
Thanks to-Miki
Regards
MuRam

Code:10058. Incorrectly defined logical table source

Hi experts
I need to create Business model for which i have two fact tables in physical layer and both are connected to each other and one time dimension which is shared by both fact tables in physical layer and one dimension which is connected to fact2 that contain hierarchy. i want to create one fact table in BMM layer which should contain measures from both fact table......
How to achieve this, any help on this..
thanks & regards
Edited by: ObieeUser on 06-May-2010 02:58
Edited by: ObieeUser on 06-May-2010 03:00

hi
Go through this forum thread
OBIEE: Incorrectly defined logical table source doesn't contain mapping
try this steps
Goto Business Model and Mapping Layer. There Fact table is present expend that fact table. You will find Sources option expend that sources option. In that option you will find sone table name that is present in Physical layer.Get the property of first table and there you can see in General tab in downward ADD option is there. click on ADD option new window is open and there three part is . right down contains some table select table from that table which we are joining and then click on select option. Now that table will added. you can change join type also. By default it is inner join. now refresh you page.
i hope this will help you
thanks & regards

NQSError 15018 Incorrectly defined logical table source error

Hi,
I am getting the following error when I am building one of my reports.
I have 3 dimensions - Time, customer and Product and two facts F1 and F2. Both F1 and F2 are joined to all three dimensions
The part I dont understand is that when I built a report with columns from all 3 dimensions and 2 facts it worked fine. But as soon as I added a new column from the customer dimension I am getting the below error. When I remove this specific column the report works fine.
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 15018] Incorrectly defined logical table source (for fact table F1) does not contain mapping for [Time.Mth_name, Time.Year]. (HY000)
Please help me figure out the issue.

Hello All,
I am also getting the same error.
I have one dim table d1 and 2 fact tables f1 and f2.
f1 contains 5 columns and f2 contains 2 columns. I created a logical table source between f1 and f2. Column mapping is done between f1.agency_no and f2.agency_no.
Columns in f1 : agency_no, agency_name,source, proj#, proj_phase
Columns in f2: agency_no, manager
Columns in d1: agency_no, agency_shortname, agency_name
Now, when i select f1.agency_no and f2.agency_no in the report. It is working fine, because the column mapping is defined between these 2 columns.
When i drag f2.manager into the report (report contains f1.agency_no, f2.agency_no, f2.manager) i am getting the following error.
[nQSError: 15018] Incorrectly defined logical table source (for fact table f2) does not contain mapping for [f1.agency_no]. (HY000)
Please help me out with this issue.
Thanks in advance.

NQSError: 10058 Incorrectly defined logical table source

Hi All,
i am trying to join two facts using a dimension. If i run report having one column from dimension & one from fact it works. But when i run a report having 1 column from first fact & 2nd column from second fact i get the below error.
I am sure this has something to do with the content tab under sources in BMM later.
But can anyone me what exactly i need to do.
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 15018] Incorrectly defined logical table source (for fact table DWH_PA_MBR_PA_TMP_NEW) does not contain mapping for [DWH_PA_MBR_PA_TMPT_NEW.PERIOD_CODE]. (HY000)
SQL Issued: SELECT DWH_PA_MBR_PA_TMPT_NEW.PERIOD_CODE saw_0, DWH_PA_MBR_PA_TMP_NEW.CURRENCY_ID saw_1 FROM DWH ORDER BY saw_0, saw_1
Thanks,
Pankaj

yes i have the following
Facts
1) DWH_PA_MBR_PA_TMP_NEW
2) DWH_PA_MBR_PA_TMPT_NEW
Dim
1) PA_PERIODS_ALL
Join 1) PA_PERIODS_ALL.PERIOD_NAME = DWH_PA_MBR_PA_TMPT_NEW.PERIOD_NAME
Join 2) PA_PERIODS_ALL.PERIOD_NAME = DWH_PA_MBR_PA_TMP_NEW.PERIOD_NAME
When i run report with columns from Fact 1 & Fact 2 i get the error.
else if i run report with column from Fact 1 & Dim it works fine.
Note: here Period Name is the key.
I guess we need to define the LTS, colmn mappings.
Thanks,
Pankaj

Incorrectly defined Logical table source

Hi all,
I have two facts(F1& F2) and two confirmed dimensions(D1,D2) for the facts F1 and F2.
F1
F2:LTS1,LTS2
D1
D2
When I query columns from D1,D2,F1,F2 LTS1 result is coming
But, when I query from D1,D2,F1,F2 LTS2 it is throwing incorrectly defined logical table sources.
Please help me in understanding this error

Here's what the OP wrote:
Hi all,
I have two facts(F1& F2) and two confirmed dimensions(D1,D2) for the facts F1 and F2.
Granted, people seem to insist on saying "confirmed" instead of "conformed" (ref. http://www.kimballgroup.com/data-warehouse-business-intelligence-resources/kimball-techniques/dimensional-modeling-techn…) but he's clearly asking for a perfectly normal and standard situation of two facts with two conformed dimensions.

Incorrectly defined logical table source (for fact table X

Hi!
Imagine the following Physical Diagram:
- Dim A
- Dim B
- Fact A
- Fact B
Joins:
- Dim A is parent of Dim B
- Fact B has a FK to Dim B
- Fact A has a FK to Dim A
Business Layer:
- Logical Table Dim A
- Logical Table Dim B
- Logical Table Fact A
- Logical Table Fact B
Joins:
- same joins (not FK Joins) that Physical Layer
When we build a report that only has one column of Dim A and one column of Dim B (A is parent of B), the following error appears:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 15018] Incorrectly defined logical table source (for fact table "Fact A") does not contain mapping for [Dim A.col1, Dim B.col1]. (HY000)
What is wrong?
Help!
Thanks.

Hi,
The joins of dimensions go via a fact table. In your case there is no common fact table.
You can solve this by drag/drop a field from the physical table Dim B on the displayed logical table source of the logical table Dim A.
Now the BI Server knows that Dim A and B have a physical relationship.
Regards

Incorrectly defined logical table source in rpd

Hi
I'm very new to rpd building and started with the below model
F1 >----D1------<F2
Fact 1 is joined to Dim 1 and the same Dim 1 is joined to Fact 2. With this model in physical & BMM Layer I built rpd and deployed.
In answers I picked 1 column from each of these three tables and getting the below error.
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 15018] Incorrectly defined logical table source (for fact table FACT_SALES) does not contain mapping for [DIM_LOCATION.LOC_NAME]. (HY000)
Seems, I'm missing some basic rule in building rpd, any help will be great.

Hi,
Just check the mapping between the fact_sales and Dimension table.
the error explaining about the mapping error only.
Just check the datatype compability too.
Regards
VG

Incorrectly defined logical table source (for fact table Facts) does not

Hi,
I have two Dimensions A and B. A is joined to B by a foreign Key.
The report works if I pull B. Column1, A.Column2.
The report is throwing an error if i try to change the order of the columns like this. A.Column2, B. Column1.
error : Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
File: odbcstatementimpl.cpp, Line: 186
State: S1000. Code: 10058. [NQODBC] [SQL_STATE: S1000] [nQSError: 10058] A general error has occurred. [nQSError: 15018] Incorrectly defined logical table source (for fact table Facts) does not contain mapping for B.Column1
I am not sure where it is going wrong.
Thanks
jagadeesh
Edited by: Jagadeesh Kasu on Jun 16, 2009 4:22 PM

did you make joins in LTS or on the physical table.
try to make join in LTS if they are not there.

MB13,HDD WD BLUE it was incorrectly defined as by 7200 instead of 5400

Similar Messages

Maybe you are looking for