MB1A : warning if i cancel a document with reference to a production order

Dear.
I need to cancel a document of consumption (mvt.type 262)  with reference to a production order.
Only when the production order have status DLV (delivered) I need that system send a warning.
Do you know any solution (customizing , exit ..) in order to solve my issue ?
Thanks.

Hi
Wwhen a production order was taken in and delivered the finished material ,,, and when you try to cancel the consumption happened for the order , system will normally give a message .
Regards.

Similar Messages

  • Re-work order with reference to previos production order

    hi guys,
    how can i set-up my re-work order to be referenced to its previous production order?

    Create production order with co07, in the settlement rule specify category as ORD, in settlement receiver give your parent production order & specify 100% settlement.
    If helpful award points
    Regards,
    Vivek

  • BAPI to create a billing document with reference to delivery or sales order

    Hi,
    Does anyone know any BAPI or function module that allows the creation of a billing document with reference to a sales order or to a delivery.
    Maybe the BAPI_BILLINGDOC_CREATEFROMDATA may be used to create a billing document with reference to a sales document, but i'm looking for a solution where I only need to indicate the number of the reference sales order or the reference delivery and maybe some few data more without the need of transfer all the items and conditions information.
    Thanks.
    Kind regards,
    Paulo Sousa

    Hello Paulo,
    To create a billing document based on a delivery use BAPI_BILLINGDOC_CREATEMULTIPLE. In table BILLINGDATAIN insert one line with the following data:
    REF_DOC = Delivery number
    REF_DOC_CA = 'J'
    If it runs fine, table SUCCESS will bring back useful data, like BILL_DOC (Billing document number).
    Regards,
    Joã

  • Creation of Billing with reference to the Sales Order

    Dear Friends,
    I need your suggestion for the following scenario.
    Client wants to create the Billing Document with reference to the Sales order.I mean when he is entering sales Order while creating the billing document ,the system should generate the billing document only for the delivered quantity.
    e.g  sales order is created for 100 Tons.And there are 5 delivery documents for 50 Tons.(Still the Sales order is open).
    Now when billing document is created with reference to the sales order ( Not with reference to the Delivery Document) it should create the billing document only for these five deliveries.
    Is it possible? If yes,how?
    Thanks in advance.
    Regards,
    Shrikant

    Hi Murali,
    Currently client has software where he enters only  Sales Order no and their software creates the billing for the delivery document for this Sales Order.
    Here client does not want to enter multiple delivery document nos if any.He wants to enter only Sales Order no.
    Regards,
    Shrikant

  • Returns Process - Billing Document with reference to delivery

    Dear All,
    In standard returns process we are creating billing document with reference to sales order.
    How can we make the billing dcoument to be created with refernce to delivery as the business wants the invoice document to be created only when the delivery is posted.
    Kinldy advise what are the configuration settings required.
    With Regards
    Mohammed Raees
    Edited by: Raeesuddin Mohammed on Aug 30, 2011 7:25 PM

    Hi Raees,
    Isnt your process flow like this: Sales Order>Delivery>Billing>Return Order>Return Delivery-->Billing?
    In general, to ensure that you're creating the invoice always w/ref to a delivery document pls do the following:
    1) In VOV8, where you cnofigure your sales doc type remove the order related billing i.e. keep it blank.
    2) In VOV8, put the billing doc in delivery relevant doc.
    3) In VOV8, in shipping section put the delivery doc type.
    4) Create copy controls between the delivery doc type and billing in VTFL at header and item levels.
    5) In the item category for this order type+ item cat grp ensure the billing relevance is either B, C or F.
    6) Maintain no copy controls between sales order and the billing in VTFA.
    I hope this helps.
    Regards,
    Raghu.

  • Posting the MIRO Document with reference of PO

    Hello friends
    while user posting the MIRO Document with reference of PO , he is getting difference in balance
    Total amount is 31,237.00
    Posting amount is 28,320.05
    Balance amount is 2,916.95 this balance amount not getting post in MIRO
    Before that i have seen GR amount is 28,320.05 but In IR amount same 28,320.05 but withholding tax tab not appering withholding tax  amount
    Can any body please  help me on the same
    Regards
    sudharshana vamsi
    Edited by: asuvamsi on Feb 24, 2010 1:43 PM

    Hello friends
    Thanks For all my problem was resloved
    Solution is
    An message has been occuring like withhold tax has been refreshed.  it is just an information message not an error message.  this message will trigger when the trans. type is non project type activity.  No back end process has been disturbed due to this message. it just passing the information to the user.
    we changed the trans. type to manufacturing activity and it is working fine.
    I hope it ll help in future
    Thanks and Regards
    vamsi

  • How to park document with reference?

    Hi All,
    We have function to post document with reference in SAP but how about park document with reference?
    Can anybody help me?
    Thanks n really appreciate

    Thanks for your reply. Fyi, I've applied employee limitation to post manual journal at tcode OBA4 and OB57.
    User A : >100K - 500K
    User B : >500K - 1 MILL (Asst. Manager)
    User C : >1 MILL (Manager)
    Normally user A will park all the journals but after apllied the limitation, user A only can park for the journal (normal tcode F-02 or other tcode) which not more than 500K. The limitation affect the park as well.
    Alternative for tcode F-02:
    User A : Park doc at FB50 (any amount) and post at tcode FBV0 by other user. There's no park or post with reference.
    User request to park with reference.. Any idea?
    Thanks friends

  • Pricing procedure determination for complaint document with reference to billing

    Hello Guys,
    I am configuring complaint process for project purpose and I got stuck. I need to change the pricing procedure which is determined for complaint
    document . Right now the pricing procedure is copied from Billing Document for which complaint refers to.
    I am searching a place in configuration where I could change the pricing procedure determination for complaint document with reference to billing doc.
    Could you please advise where I can find it ?
    Thank you in advance!
    Br,
    Frederic

    Hello Frederic,
    I would check the following in SPRO:
    - CRM
    - Basic Functions
    - Pricing
    - Pricing in the Business Transaction
    - Determine Pricing Procedures
    Here the pricing procedure depends on sales organization, division, distribution channel, document pricing procedure and and customer pricing procdure.
    Best regards,
    Thomas Wagner

  • Single Invoice with reference to 2 Sales Order

    Hi,
    How can i make a single  billing invoice no (vf01) with reference to 2 sales order?
    billing plan has been maintained from each sales order,we dont have any pgi process.
    so process is sales order->billing plan-> invoice
    my user want to generate single invoice with reference to 2 sales order - same customer no.

    For processing  billing due list (VF04) - The system combines documents with the same customer number, proposal billing type and sales organization, and attempts to include them all in the same billing document. If the preconditions are met, then a single invoice is created for the deliveries and/or orders.
    To do a collective billing. Collective Billing Documents
    The selected documents in the billing due list are billed. The system tries to combine them as much as possible. Processing of the selected documents is carried out in the background. After processing of the documents, you return to the billing due list. The sysytem will indicate whether or not a document has been billed successfully.
    If successful, then Save
    You can also carry out a simulation of billing. In this case, select Simulate. The system simulates the collective billing / online function described above.
    -After the collective run you can display a log for the collective run. This displays possible errors during billing.
    -You can also branch to the resulting billing documents, in order to carry out a split analysis.
    -The billing documents of a collective run can also be canceled.
    Re: VF04
    Hope it assist you.
    Thanks & Regards
    JP

  • Can Two Invoice be created with reference to one Return order

    Dear All.
                  Can two SR Invoice be created with reference to one SR Order.

    Thanks JP Sir,
                       Much appriciated ,we are having SAP IS:AFS(Our Business is of Manufacturing & Marketiing.Consumer product.
    Sir- I created a SR Order after creating it forgot to do PGR & without  doing PGR I opened sales log in order & created SR Invoice without doing PGR & when I check it in VF03 ,Issue print out then there was not any material discription in Created Credit Invoice & when I checked Display document then there were no any delivery document then I came to know without doing PGR how material  can be copied  & then did PGR  with reference to same SR Order  n created another Invoice .but my question is that without cancelling previous SR Invoice how another Invoice can be created with reference to same SR Order.
    Thanks,
    Kamlesh

  • Invoice VF01 with reference to the sales order

    Dear Experts,
    Our business requirement is to book the invoice with reference to the sales order without posting delivery and PGI. Provide me the step by step process to complete this configuration.
    Is that suggestible to change the existing document type which the business is using by creating delivery PGI and Invoice to the document type where invoice booking with reference to sales order or I have to go with the new document type only.
    With Regards
    Uday
    Message was edited by: G Lakshmipathi
    Please dont add such text in your post which is not encouraged in SCN.

    TW Typewriter
    can you help, by creating the entire process in Sandbox and informing uday about the configuration steps?
    At the outset, please refrain posting like this which, being a senior member of SCN, you should be aware of rules where spoon feeding is definitely not encouraged.  Those sort of efforts have to be taken by OP.   This forum is only to guide the people wherever they get stucked. 
    cc: Phanikumar V
    You should also be knowing the forum rules and I thought, you would have expressed like what I said above.
    G. Lakshmipathi

  • TO CREATE AN INVOICE WITH REFERENCE TO THE SALES ORDER

    I have a credit memo request(sales order) and I need to create a credit memo(invoice) on saving the sales order without creating the delivery order in between.The invoice(credit memo) must be created directly with "reference" to the sales order(credit memo request) without the delivery order in between

    Hi,
      You can deliver the standard sales order by VA02 going to sales document-> deliver.
    then save it it will give you outbound delivery number then go to vl02n the do the PGI of the same.
    and for Invoices first create billing document byVF01 then create invoice list VF21
    Thanks
    Ankur
    Edited by: Ankur Sharma on Jul 23, 2008 7:51 AM

  • One sales order with reference to 2 sales orders

    Hi Gurus,
    can v create one sales order with reference to 2 sales orders?
    i think it is not possible, but if there is any chance let me know?
    Cheers,
    Sumith

    First u need to ensure whether copy controls are maintained between the documents (say Ex ZOR ---> ZOR) here i am assuming that ur source and target document are of same type)
    Maintain the controls.
    Then u need to create the source documents  and save.
    Then, u need to create the target document by using the create with reference button, enter the first reference order no and proceed further. ater entering into the order, again u need to press the create with reference button for the second time to enter the second reference order.
    Now both the order items will come to a single order. now u can proceed further
    Hope it is useful...
    reward points if u found useful..

  • Document Flow from BOM to Production Orders

    Dear SAP Gurus,
    I have attached a few documents at header level of the BOM. I have also attached document at item level in the BOM. When I create a production order these documents are not flowing to Production Order. Is there any way to do that. I also want to see them in CS11 and CS12 reports.
    In OPKP I have already checked Document Links-BOM "On Creation" and "On Release" for my production scheduling profile.
    Thanks and Regards
    Geravine

    I have three documents. One is attached at the BOM header level under the documents tab. The second with item category D is entered as a line item in the BOM Items. The third is in the Item Level under the item's documents tab in the item details. All have same document type.
    When I create the production order the second document is copied in the document overview of production order. First and Third are nowhere to be seen.
    Is there any config or user exit to achieve the same?

  • Creating new sale order with reference of old sale order.

    Dear gurus
    i have requirement
    i want to make a sale order with reference of old sale order.
    how to achieve it?
    Regards
    Saad Nisar

    Hi,
    In vtaa
    give source and document number and assign all the relevant routines.
    Now on the left hand side, click the Item button and then give the source I.C as TAC and target also as TAC adn then fill the routines.
    Do the same for Schedule line (which is related to TAC)
    If this is done, then ur scenario will work

Maybe you are looking for