MB1B i need to check the stock overview & venodr stock

HI Experts,
i need to send the stock to subcontractor..so PO reference mb1b 541 movement type i m sending the stock..here i want to see the stock overview as well as see the vendor stock also.. if there is any setting or threre to check the stock otherwise any enhancement can fulfil this requirement.

Hi,
Enter movement type 541, PO referenc and on next screen, click on Environment tab, enter only plant, remove storage location , select Stock Overview -> Stock Material , system will show you stock in Plant for all Storage Location as well as Stock lying at Vendors end, else if tyou want to know stock lying at vendor's end , you can run report MBLB (Stock at subcontractor)
Regards,
Vikas

Similar Messages

I need to check the information i have into the cloud boy i don't know how to reach it.

I Need to check the information i've in Icloud but i don't know how to reach it.

Go to http://icloud.com and log in. Whatever is in iCloud that c an be seen, should be able to be seen from there. Other things may need to be restored directly to a device to be seen though.

I did a pre-order on a music album then I did not realize you needed to check the email to get the album so by accident I canceled it now I lost my album please help

I did a pre-order on a music album then I did not realize you needed to check the email to get the album so by accident I canceled it now I lost my album please help

In list view, select the album column. To choose which columns appear, select an item on the left side of the window (a playlist, for example), choose View > View Options, and select the information you want to see. You can also Control-click a column heading to select columns to display.
The column selected determines how tracks are displayed. For example, clicking the "Name" column displays all tracks in alphabetical order; clicking the "Album" column displays the tracks in album order; clicking the "Date Added" column displays the tracks in the order that they were imported into your library. Columns also have a disclosure arrow at the right of the column (when selected) that you can click to reverse the order.

Need to check the data flow from R/3 to BW server.

Hi BI experts,
This query is regarding need to check the data flow from R/3 to BW server.
As of now I have some set of reports which I would need to take up in BW. The requirement is to go through the list of transaction codes for reports in R/3 and find out if there are already any existing objects in BW system which I can use for these reports.
So, can u plz help me.

Depends what are your Tcode or Reports users run in R/3 and they want the same in BW.Then in BI Content we have Out of the box Delivered reports.You can activate those Load data and use it.
Gimme T-codes you have I can send you Standard reports in BI or Cube you can get these from.
~AK

HT5035 I need to check the balance on a gift card. I do not know if it has been used.

I need to check the balance on a gift card. I do not know if it has been used.

I just had this issue. The only way to check is to go to iTunes, sign in, click redeem and enter the code. I had a card that my wife swore she used but thought I'd check it anyway. Good thing I did, $50 credit.

[svn:bz-trunk] 23143: Certain code needs to check the existence of the class validation validator (some brokers and other listeners) during message broker init, however the validator was not being created till the very end of the method .

Revision: 23143
Revision: 23143
Author:   [email protected]
Date:     2011-10-27 06:31:02 -0700 (Thu, 27 Oct 2011)
Log Message:
Certain code needs to check the existence of the class validation validator (some brokers and other listeners) during message broker init, however the validator was not being created till the very end of the method. Promote it to be at the top instead of at the bottom.
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/config/MessagingConfiguration.java

Revision: 23143
Revision: 23143
Author:   [email protected]
Date:     2011-10-27 06:31:02 -0700 (Thu, 27 Oct 2011)
Log Message:
Certain code needs to check the existence of the class validation validator (some brokers and other listeners) during message broker init, however the validator was not being created till the very end of the method. Promote it to be at the top instead of at the bottom.
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/config/MessagingConfiguration.java

Report to check the valued GR block stock

Hi,
I used movement type 107 to receive the PO with indicator 'Origin Accept', and would like to check how many stock I have received to the valued GR block stock.
Anyone tell me which report I can use? I've checked the stock report under IM, but haven't found it.
Thanks!
Lin

run Tcde MB52, and from change layout Ctrl+F8 move column Value BlockedStock.

Enhancement for MB01 - Need to check the document before post

Hi All,
I need to check a material document before posting in MB01 for a field "GR/GI Slip No" which we are using to enter "gate entry no".The issue now is as i'm using a table control screen to post GRs in bulk . i want to avoid duplicate GRs of a particular gate entry.during analysis i found that an exit/Badi at MB01 - end may serve my purpose well.
thanks and regards,
sachin soni

Hi,
You may try the EXIT:
MBCF0005 Material document item for goods receipt/issue slip
or BADIs:
MB_BAPI_GOODSMVT_CREATE
MB_BATCH_MASTER
MB_DOCUMENT_BADI
Regards,
Renjith Michael.

HT2452 i need to check the cloud and match with pad and phone please advise

trying to set up icloud on all devices using imatch but having trouble any suggestions

Hi again,
I'm not full-time at this location, but when I'm here I'm pretty busy, so I haven't had time to blah blah blah.
Alright, I've figured out the IP addresses, I think.
My printer's is 192.168.1.105. I know this because it's on the printer's control panel.
Now, when I look at my network connection in system preferences, it says 122.127.104.156.
Do I understand correctly that the third set of digits, 1 and 104 respectively, are the subnet and the subnet for the two devices need to be the same?
The IPv4 is configured using PPP. Am I meant to configure it manually and set up an IP address for this location using the subnet 104? In which case, I need to assign a unique number to my Mac for the final series. And it must be different from any other device running through this here router.
That seems like it should be pretty easy. If it's just my mac, the Windows system, and the printer on this network, don't I have the choice of any number except three between 1 and 244?

In table rows , i need to check the date validation of perivous ent'd rows

Hi All,
I'm using adf 11g.
I have a table with add and delete button in jsff. In jsff page , i mean table row have one lov column and date column and enterable inputtext fields .
Conditions 1.lov value , date column and inputext value should be unique . this can be handled by alternate key.
2. if user enters value like
lov value date inputtext
v1 01/02/2011 ipt1
v2 01/02/2011 ipt2
v1 01/01/2011 ipt3 here , lov selected v1 is already selected in first row, i want to validate dat second occurance of v1 with combination date and inputtext should be
unique --- it makes unique with compare to first row .but i have to check second v1 date should be always greater than the first v1's date .
User can add n number of records of keeping date variance , but the same lov value having record , the date should be always less than the perivouse entered row date (same lov value ).
how can i handle this date check . business rules / validation .
thanks in advance .
Edited by: user9010551 on Jun 16, 2011 9:23 PM
Edited by: user9010551 on Jun 16, 2011 11:25 PM

you have to make use of this technique - in memeory filtering
http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974/bcadvvo.htm#CEGBEICF

I am not being able to connect to another Apple device using the Face time what settings do i need to check.The device being used is an iPad mini

I am not being able to connect to another Apple device using the Face time.The device being used is an iPad mini.
The internet connectivity is perfect the wifi is even working.

'''plafstudiesdotc'''
You are welcome.
'''''So that other users can find answers that have worked, please take a couple of minutes to return to the forum, sign in and click "Solved" next to my answer. Thanks. '''''

Attention to the apple developer, u need to check the issue about the iMovie which installed in an iPad 4th gen. Is having a problem during closing the app from the theater page to the home screen. It doesn't closes exactly severally...

Attention to the Apple developer, the iMovie which installed to the iPad 4th gen. has a problem when it's opened at the theater page it frequently couldn't be closed down to the home screen. The app page is actually blinking and cannot tap onto anything..

Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again!

My mail won't download up date etc its saying I need to check the settings have done so not sure what to do or what is wrong

My mail won't upload, update its tilling me to chick the settings witch I have done. I don't know what too do to fix this problem I know I have new mail as its coming up on my phone and if I open mail on other computers. But for some reson in the last few weeks it won't retrieve new mail on iPad

First thing to do is to try a reset:
Hold the Sleep and Home button down for about 10 second until you see the Apple logo.

To check the stock of the header and components in same screen?

Hi ,
Is there is any option available in SAP to check the header and its components exising stock in same screen like in multilevel bom we can see BOM and components same way we need one more column which shows the avialble stock.
Thanks
KK

Dear Madhu,
My question is we need to check the stock for one material and it's components to manufacture it in one screen for this is there any option available in standard SAP,where as you have suggested MB52 which gives me the plant stock for all materials.
Thanks
KK
Edited by: kiran kumar on Mar 28, 2010 8:31 AM

How to check the qty is available when doing stock transfer.

I need to remain the confrimed qty while doing stock transfer.
for example:
Unrestricted use : 20
Sales Order : 10
Max qty for stock transfer = 20 - 10 = 10 but not 20.
How to do customizating?

Dear Amruta
Thank you very much for your help.
I use Checking Group '02' and can you tell me which checking roll is suitable for checking the qty while doing stock transfer.
eg: the atp is 10 pic and stock transfer is allowed in 10 pic. it will message me if the transfer qty is more than 10 pic.
Many thanks,
Slam

MB1B i need to check the stock overview & venodr stock

Similar Messages

Maybe you are looking for