Mb1b movement 453 - profit center not from material but from sales order

Dear All,
we have the problem that by return process from sales order stock to free stock (453 movement) we would like to have the original Profit center from sales order, but as SAP standard it moves PC from material master.
we have implemented already oss 978159 sowie 1038490, but did not help.
Since days we try to find an uxer exit in MM or CO!? where we could write in the correct profit center. But unfortunately PC from material master pops up at the end of the process, and the system overwrites it again and again.
Had sy of you similair problem? can you please help with an user exit?
Thanks,
BB

Hi
I think this behaviour is correct.. Since you are moving from Sales order stock to Unrestricted stock, the PC from mat master would prevail...
As far as I know, this behaviour is correct
Regards
Ajay M

Similar Messages

  • Partner profit center/Profit center billing (VBAP-PCTRF) missing in sales order during intercompany sales process.

    Hello All,
    I am facing a issue where in the partner profit center/profit center billing (VBAP-PCTRF) filed at item level in sales order is not getting filled during inter-company sales process.
    I have maintained profit center in material master for both selling and supplying company code.
    In addition to this when I generate a invoice "F2" system posts to the delivering company code's profit center.
    Note: profit center 9999 assigned to both company codes.
    Selling company code's material master screen shot:
    Supplying company code's material master screen shot:
    As per my analysis:
    1. The profit center field (VBAP-PRCTR) is filled in with the data maintained in material master for delivering/supplying company code and when inter-company invoice IV is created, system is posting to this profit center, which is correct as per my understanding.
    2. If I maintain some substitution rule using 0KEM, and if the requirements are fulfilled system fills in the partner profit center (VBAP-PCTRF).
    3. If i create a order (non-inter company) in delivering company code then correct profit center (VBAP-PRCTR) is flowing from material master.
    Please help me in understanding why the data in partner profit center (VBAP-PCTRF) is not flowing in during inter-company sales.
    Thanks & Regards
    Naveen K.

    Have a look at these notes:-
    1532865 - FAQ: Profit center in the billing document
    1579002 - Incorrect filling of "Profit Center for Billing"
    G. Lakshmipathi

  • How to update "profit center for billing"(VBAP-PCTRF) for sales order.

    Now, we need to bring "profit center for billing" in sales order to correspondence with meterial master, while BAPI "BAPI_SALESORDER_CHANGE" contain not this field, is there any way to achieve except modify database table directly.
    Thanks!

    Hello,
    Pay attention with BAPIs in SAP, they often use different names as input parameters as the actual fieldnames.
    In your example you can use the BAPI BAPI_SALESORDER_CHANGE.
    You have to check the parameter ORDER_ITEM_IN (table) with field PROFIT_CTR.
    This will correspond with the field VBAP-PCTRF that you want to update.
    You will also have to use the table ORDER_ITEM_INX of the BAPI and flag your field (PROFIT_CTR) with an 'X' in order to update it in the database.
    Always use the RETURN (table) parameter from the BAPI to see what the result is of your update.
    Success.
    Wim

  • Price Determination from Material Master in Sales Order.

    Hi Gurus,
    We have a Requirement from Client, The Client maintains Planned Price 3 in Costing 1 View of Material Master and this is Maintained by Finance Department and they want that Price to be Reflected as Sales price PR00 in Sales Order without maintaining the Condition Record for PR00.How can we Configure this please help.
    Thanks in Advance

    Dear Amit1986 ,
    Ask your ABAPer to write a routine for alternative condition type(VOFM)
    Logic will be to fetch the value in the costing view (you can get the table and field by pressing F1 in the relevant field) of the matnr in vbap. the Abaper will be able to call the matnr value from the screen before the sales order is saved.
    This matnr value should be passed in the table (which you got by pressing F1 in the material master) and you can fetch the value of the relevant field .
    Now assign the alternative condition type against your PR00 in the pricing procedure.
    Check and revert back.
    Thanks & Regards,
    Hegal K Charles
    Edited by: Hegal . K . Charles on Oct 18, 2011 8:58 AM

  • Profit center not picking correctly in PO from sales order

    Hi Experts,
    Profit center is not picking correctly.. in PO
    In material master Profit center is configured as XXXX
    We have raised a sales order for the same material with two line items (e.g) 1500 kgs & 1600 kgs and profit center has been changed in the sales order to YYYY
    There is one purchase requistion for the same material with two line items
    But  we have raised two purchase order for each line item in which the same sales order is linked to these two purchase order.
    In the first PO , for the first line item in sales order ie., 1500 kgs profit center is picked from the sales order ie, XXXX which is correct but  in the second PO, for the second line item in sales order ie., 1600 kgs profit center is picking as YYYY ie which is configured in material master.
    What could be reason ? Help  in this regard will be highly appreciated.
    Thanks in advance
    Narayanan

    Hi Narayan
    Check the Account assignment in the 2nd PO.. Does it have E as Acct Assgn Category?
    It should have sales order as the account assignment... If yes, then it must pick up PC from the sales order...
    Try to put a deletion flag to this PO and create a new one, if possible... You would come to know if some one has changed the PC
    BR,Ajay M

  • Profit center not updating with plant change

    We have an issue with the profit center not updating with change in delivering plant.
    A CSR entered a material on a sales order but the material is not extended to their location.  They select a plant to deliver the material from.  At this point the profit center fills in for that plant, from the material master. 
    The issue then is the material is not currently available at that plant so when the availability check is preformed the CSR checks for availability in another plant.  They are able to find an available item at another location so they select that location. 
    When they save the sales order the plant reflects the new delivering plant, but the profit center still reflects the first selected plant.  The profit center does not pull from the material master correctly.
    Has anyone seen this issue before and developed a solution?

    Hello Matthew
    May be you have substitution defined in CO.
    T codes 0KEM or 0KEL
    See the following OSS notes:
    167912 - Substitution call-up points for sales order/billing document
    Hope this helps.

  • Billing error-Profit center not exist

    Dear Experts,
                           While Releasing  the billing doc to Accounting , system throwing the error like, Profit center does not exist, but after that i updated the profit center for that material in material master,still i am geting the same error message

    Hi Raja,
    Pls cancel the biling document that you have created and then populate the profit centre in sales order.
    In sales order you can find it in item details view.>Accounting document>Profit centre.
    For each item in the sales order you have to enter the value.
    Save the Save order.
    Or you can enter the profit center in MM02 screen.
    Or you can maintain in OKB9 T.Code also.
    Now create the billing document and release it to accounting.
    Regards,
    Krishna.

  • Derivation Of partner profit center in COPA (Direct Posting from FI)

    When posting from SD partner profit center is derived and transfered to COPA, so eliminations can take place.
    When ever we made posting from SD, Partner profit center is coming from derivation rule which is exclusively for sales and maintained in transaction code 8KER.But whenever we made direct posting in FI, Data is transferred to COPA before profit center is derived as system does not find any data from COPA or in other words there is no any Derivation rule or table lookup or user exists in COPA from where we can derive the Partner profit center.
    For testing purpose I made a derivation rule in COPA in KEDR with the same logic used in 8KER, Partner profit center is coming in COPA from this derivation rule. Derivation logic used in 8KER  is very simple : source filed is KUNNR from table KNA1 and target Field is Partner Profit Center : PPRCTR from table CEPC.
    I mean that i derive the partner profit center from customer number in 8KER transaction which is only for SALES and in EC-PCA only.
    Now whenever I do a direct posting from FI, suppose using transaction code F-02
    but partner profit center is not coming. I made a another derivation rule in KEDR in COPA and maintained the rule values there and I got the success for deriving the partner profit center.
    But my query is that If I am maintaing rule values in 8KER then why I maintain the same duplicate data in KEDR.Can we use the same rule values from 8KER for direct posting of FI.
    I have tried with Table lookup, derivation rule in KEDR but not getting any success.
    Please tell me that without maintaing rule values in KEDR (as these are already maintain in 8KER)how I can derive the partner profit center from FI posting.Or in other words i can say that how we can get both PCA as well as COPA document with partner profit center in case of FI direct posting.
    Thanks in advance.
    With best Regards
    Sandeep Seth
    [email protected]
    Thanks in advance

    Dear Paolo
    we have live system, we also have cost center accounting active.
    do u know how to active automatic posting in Profit segment through cost center.
    For Example, i post document in FB60, i assign cost center against GL expense account, if i assign profit segment the amount reflects in COPA, but i want when i assign required cost center it automatically active the profit segment ?
    hope you under stand my query!!!
    Regards
    MuR!!!!

  • Error - Balancing Line Item Profit Center not filled in Line Item 007

    Hi
    I am trying to do a transfer posting from one vendor account to another. However, system is giving an error - Balancing Line Item Profit Center not filled in line Item 001. Pls suggest.
    Regards
    Vaibhav

    hi  vaibhav
    you go through this Tcode  FAGL3KEH  and maintain default profit centre. in the  error message system shown GL accounts
    hope you userstand
    thanks
    dharmendar

  • Profit center not changedater

    A material was having profit center A. Scheduling agreement was created against it and GR was done. While creating the invoice it was determined that the profit center for the material should have been B. So the GR was reversed and and the profit center was changed to B in the material master. Now when we are trying to post the GR again..it it still picking the wrong profit center- A. Why is this so? How can this be corrected?

    Hi,
    you have change your profit center in your material master
    But it not get chnage in your PO for that line item ,it wont get chnage in Po for tha line item,
    you have to create new line item in your Po then it will come correct in MIGo otherwise it will take old profit center in MIGO
    Regards
    kailas Ugale

  • Userexit for populate profit center entry without material in T.code CORO.

    Hi guru's
    we are running T.code. CORO.. we want to populate profit center entry without material. can any one tell me the exact user-exit used for this and . can you tell me the procedure how to find the specific userexit trigger at that point while we are running any T.code.
    Thanks in Advance..
    GSANA
    user exist in PP for transaction code CORO-process order without matl code to populate profit center entry, can u plz find out that & send it to me..

    Thank you all for your valuable input.
    Srinivasa, your suggestion is very good, especially when calculation of variances/WIP is required. But again as there is no cost relevant material where the WIP/Variances will be settled during settlement process?
    1) PP need to create process order without material because changeover cost should not be charged to either material and capacity hours are consumed during changeover. 2) CO need to identify the cost of changeover which should be charged to cost center. So far we have achieved both of these two objectives by the following activities:
    Creation of Process Order without material using CORO T.Code     say 3 hours of changeover occurred we create order with quantity of 3 Hours. And confirmation of activities quantity 3 using COR6N so cost center is credited by 3 x rate per hour. As there is a separate Process Order type for Changeover we can identify changeover quantity and cost in a given period.
    After contributors feedback in this thread I have come to conclusion that I don't need to assign Settlement Profile and PA Structure to Changeover Process Order type. So no need to run Process Order settlement. As there is no specific required for Changeover WIP/Variances as well.

  • Profit Center Assignment on material master

    Hi,
    We have not assigned profit centers on materials and there are line items that are going to unassigned or dummy
    We are into utility industry. We have 3 Profit centers Headquarters, Water Operation and Power Operation.
    We have spare parts and other materials which are used for maintaining equipment or service orders in water operation and also power operation.
    So to which profit center we need to assign these materials which are procured and used for water operation and power operation.
    Just not sure which of the 2 profit centers we need to assign the materials to.
    Thanks,
    Rajan.

    Hi,
    In standard you can assign one profit center in material master. But you can maintain different profit centers for same material but maintained in different plant.
    In Finished goods case you can set Profit center substitution in 0KEM.
    Hope this clarifies your doubt.
    Regards,
    Sany..

  • Profit center document created but profit center not updated in FI document

    Hi Experts,
    I have a strange issue; we created FI document via billing document (SD) where in profit center document got created but profit center is not updated in FI document.
    We have separate table to identify the profit center by customer.
    Please let know what could be the cause or reason for this kind of scenario
    Thanks,
    VK

    Hi Krishna,
    Though ur question seems very old, but now i got the same requirement as like you.
    So if you remeber what needs to be done for this issue thats very good help to me.
    My Requirement is : I have created Service Entry Sheet by referring PO and while releasing this Service Entry Sheet system is generating MIGO Doc and FI documents in background.
    And I have updated PERNR (Persnoal No.) in MSEG-SGTXT by using enhancment but it's not populating in BSEG-SGTXT.
    And I found an internal table while debugging i.e ; like ACCIT (not exactly ,similar to this ) where i have updated pernr and sgtxt but same thing will not available in FI Doc display (BSEG-PERNR or BSEG-SGTXG)
    So could you plz suggest what needs to be done to achieve this. Im assuming that, is it possible through BTE (Business Transaction Events) ?.  if yes, plz tell me how to proceed.
    Thanks
    Madhan

  • New GL - Doc Splitting - Profit Center not hitting the Zero Balance GL

    Dear SAP New GL Gurus,
    I am trying to activate the doc splitting where the system uses a GL Account to ensure that Profit Center wise Trial Balances are tallied.
    I have done the following configuration till now, and I feel that these steps should ideally split the doc and post the PCA Adjustment Account Entry - I think its the Zero Balance Clearing account that the system should ideally be using.
    I am not sure what I am missing here - This is what is done till now:
    1. Activated Document Splitting - Used Standard Method 0000000012.
    2. Classified GL Accounts for Doc Splitting as per standard SAP categories.
    3. Classify Doc Types with assignments of Transaction and Variant. Done as per standard, no changes made.
    4. Defined Zero Balance Clearing Account.
    5. Define Document Splitting Characteristics for General Ledger Accounting - Made Profit Center field as Mandatory
    6. Define Document Splitting Characteristics for Controlling - Left it BLANK as Point No. 5 is done for GL Accounting.
    7. Define Post-Capitalization of Cash Discount to Assets - Ignored
    8. Edit Constants for Nonassigned Processes - Ignored
    Under Real-Time Integration of Controlling with Financial Accounting:
    1. Standard variant 0001 used.
    2. Assigned 0001 variant on the Co Code.
    3. Define Rules for Selecting CO Line Items - Ignored
    4. Define Account Determination for Real-Time Integration - Ignored
    Accouting Entry posted by me - Both lines are Balance Sheet items:
    DR     Bank GL     Profit Center X
    CR     Bank GL     Profit Center Y
    Please help me out here.
    I will assign full points.
    Many Thanks
    Bob

    Hi,
    Yes. Very much. you need to assign scenarios even if you are using leading ledger.
    In any enty there will be minimum two views, Entry view and Ledger View
    Ex.
    Entry view
    Account    Amt    A/c Assig objects - Profit Center
    Customer  400                                   
    Sale A/c  -400                                     2000
    Gl View
    Account                    Amt    A/c Assig objects - Profit Center
    Customer Recon A/c  400                                   
    Sale A/c                   -400                                     2000
    If you dont assign Profit center in the scenario to the leading ledger, in gl view you will not be able to see profit center against the sales line item
    Assign points if useful
    Regards
    Raghu Ram

  • Lockbox- GLT2 201 "Balancing feild Profit center not filled"

    Hello,
    I am trying to configure lockbox with document splitting active. When Upload my file its posting to the Lockbox clrg account but errors out when I try to post to the GL account. GLT2 201 "Balancing feild Profit center not filled". Please let me know if I am missing something.
    Regards
    Siva

    Step 1. SPRO-FS-GL Accounting- Business transactions-Doc Splitting-Edit Constants for Non Assigned processes - New Entries - Assignment of Profit Centers - Give your default/dummy profit center.
    Step 2. SPRO-FS-GL Accounting- Business transactions-Doc Splitting- Extended Doc Splitting - Assign Document Split - Check the Std Acct Assignement - Record your Constant in the field.
    Should resolve your issue.

Maybe you are looking for

  • Can you purchase from a US iTunes store if you are in Australia???

    I just want to rent or buy a movie that is available in the US iTunes store, but not available over here in Australia.. Does anybody know how I'd go about doing that or if it's even possible?? Thanks heaps... Paula

  • Defective travel adapter

    My 90W slim travel adapter I bought from hp-batteries.com is defective. The warranty claim center is useless. It asks for the serial number, and then asks for the model number. It then says it doesn't recognize it. It didn't even register on your web

  • Has anyone had any issues using Adobe CS or Pro Tools on the LATEST MacBook

    I am about to purchase a new MacBook Pro and would like to know if there has been any issues with the latest MacBook Pro with programs such as Pro Tools, Adobe Creative Suite, or any programs that have anything to do with rendering. Please let me kno

  • Solution other than nfs for centralized baskup location on Unix?

    Good afternoon, I am trying to setup RMAN and am currently in discussions with our Unix team. They have expressed a certain uneasiness in using NFS mounts on multiple machines to achieve the same results as creating a share on W2K. Is there an altern

  • Publisher 6.3

    Hi, I am experiencing some very strange problems with our installation of Publisher 6.3 on Aqualogic G6 6.1 Portal (.net/IIS). In Publisher I open up a content canvas to edit, when I click checkout, I reveive an JavaScript error in IE displaying the