Mb1b trigger which output type ?
Hi
we do mb1b for 322 movement. I found it has wa01 and zwa1 which both for mb1b output type.
When we do for plant A, it may use wa01, another use zwa1? Does this relate to omj4 setup?
Or any place we could trigger different output by plant?
Thanks
Alice
Hi experts,
for wa01 and zwa1 ,these two output type we setup in mn21 same.
type as wa and print version 1 , item document as 6 . Only in OMJ4
we setup plant a for wa01 and plant b for zwa1.
Does that mean when we do mb1b , for plant a ,it will trigger out wa01?
Or where else we could setup plant with output type ?
Thanks
ALice
Similar Messages
-
HOW TO TRIGGER AN OUTPUT TYPE ON INVOICE SAVING
I need to write a routine to trigger a specific ouput type on invoice saving for a particular pricing condition.I have written the code within the routine.But now what do I do to trigger the output type , I mean in which transaction do I place the routine
to make it to trigger when the invoice is saved if the given condition is satisfiedHi Shah,
You need to assign that routine in your billing outptut determination procedure control data then specic the the condition type.
IMG path is
SPRO>Sales and Distribution>Basic functions-->Output control >Output determination>Output determination using by the condition technique >Maintain output detrminetion for the billing documents>Maintain output determination procedure-->Control data.
Before tha you make sure that you are maintaining condition record for that output type in VV31 transaction
I hope it will help you,
Regards,
Murali. -
IDOC triggerred by which Output type?
Hi Gurus,
My requirement is to add a new segment in ORDERS05 and populate the values int he Zsegment based on the output type selected.
I am using same user-exit to populate but i am not sure how to find the output type which user selected.
How to find the Output type in FM IDOC_OUTPUT_ORDERS?
Thanks GIRIHi Giri,
There is no direct provision to Read the Output type from the function module. But you can do this with the following Options.
1) Find user Exit in PO Transaction while issuing the output. Export the output type from there and import it in your IDOC function module and then do you logic.
2) Since you are going to Specify the Basic type and Extension in the partner profile you no need to worry about other partners. This extension will not trigger to the other partner and other output types.
Let me know if you need any further details.
Thanks,
Venkat -
Email Output type : No Automatic trigger of output type while saving doc.
Hi Gurus - To trigger an email from the output type, I've configured a output type with medium as 5(external send) with communication strategy and created condition records with medium as 5 to trigger immediately.
While creating corresponding document, the output is not automatically determined, it required to manually feed the output type every time. Can you please provide if any settings were missed to trigger immediately!!
In Output analysis showing a message as "No print data determined for the communication strategy"
Steps:
1. Configured the output type with Medium as"5" and associated partner functions.
2. Created the condition records with medium as 5 and trigger immediately.
Thanks,
SreeHi ,
while maintaining condition record for output type when you click on communication method, give logical destination as 'LP01'.Hope this will solve.PLease let me know if you have any issues on this.
Thanks and regrads,
Rajeshwar -
SAP std pgm to re-trigger selected output types associated with sales order
Hi,
Can anyone help me providing the standard SAP Program which will do repeat output action for different output types associated to the sales order.
Output Type
ZA00
ZA01
ZA10
ZA11
ZML0
ZRN0
ZSA0
ZSA1.
Thanks,
Ramya SanjanaHello Ramya Sanjana,
it's MAXDB/liveCache forum.
-> Do you have the MAXDB/liveCache issues?
-> What is the version of your system? SCM?
Regards, Natalia Khlopina -
How to trigger EDI output type by logical system
Hi,
I am trying to propose a delivery output on delivery document based on logical system.
I have maintained partner profile by logical system. In the partner profile, i have given the delivery output type and the process code.
I have also maintained condition records for the delivery output.
I would like the system to propose the delivery output not by ship to party or sold to party but by the logical system.
Because i do not want to maintain 3000 customers in the partner profiles, instead trigger the output by logical system.
Please let me know, if anyone has gone thru this situation and resolved.
Thank you in advance.
-NagaHi,
First thing you should make sure that, when you create the output type , partner function should have an entry for EDI - LS combination.
Secondly , make sure you have option for EDI transmission on the output type (medium 6).
Third, when you create partner profile for LS, make sure you give partner function as LS, even though SAP gives warning that its not required.
Last but not least, i didnt create any distribution model , because when i created distribution model and generate partner profile, system was not generating the profile properly.
I am not sure, whatever i did was right, but its working for me.
-Naga -
4 delivery smartform printouts when we I trigger an output type
Hi SD gurus,
I need to print 4 copies of the delivery smartform when I give the output type in VL02N at one go? Can we do it.
Thanks,
DeepikaIf you want to print 4copies, then you should only code it in your program. Else you can put the output document in a spool by updating the spool parameter in your code. Then you can go the spool in SP01 and can print n number of times you want.
Use of Multiple Issuing button
If the output type is triggered already during delivery creation, and then you go to VL02.....now
If this button is ticked on for hte output, then it will automatically proposed once again
If button is not ticked, then it will not be automatically proposed. You have to manually enter the line in the output window to trigger it.
Hope this helps.
Reward if this helps. -
Hello ,
I forgot to create a condition record for output type for sales orders........
Is there any program that I can retrigger the Output type now for existing orders?
Thanks and best regards
LHi,
Yes,you can process this output again by using the program "RSNAST0D".
Goto the T.Code "SE38".
Enter the program name as "RSNAST0D".
Enter the Application as "V1(If it is Sales)".
Enter the object Key as "00 followed by your Sales Order Number"(total should be 10 digits).
Enter the output type.
Select your appropriate Transaction medium.
Selection type as "2(Repeat processing)".
Execute.
For Billing,you can use the same program or the T.Code "VF31".
Regards,
Krishna. -
How mb1b output type trigger out
Hi experts
How mb1b output type trigger out? we found when we do mb1b , it also will trigger out one output type by default printer in user profile ? How this work? We only hope it trigger out output type BY OMJ4 setup.
THanks
ALiceHi experts
I check OMJR/OMJ3, but zwa1 or wa01 output type doesn'et setup in it. OMJR setup the printer item as 6 for movement type . only OMJ4 setup wa01 and zwa1 output type . NACE could see the output type configure, but I don't know if user A set user group in profile for ND9. it should trigger out zwa1 output , why wa01 output will also trigger out ,
How IM trigger the output type ? In mn23, the two output type both setup for printer item 6.
THanks
alice -
Hi all,
How to trigger delivery output types thru print program.
I know there's a BAPI for this but dont know which one.Hi,
By doing config in NACE for delivery output type u can use different o/p types for diff delivery types etc..
but can trigger only one o/p type at a time which will in turn trigger its relevant print program & print sapscript/smartforms.
Regards,
Amit -
Need to trigger output type when BAPI is run
I need to trigger an output type which generates an idoc when material group is updated using a BAPI.....Can anyone tell me is there a bapi which does this ?
I just want to know whether there is any BAPI which triggers the output also when we make an update ?
-
Hi Experts,
I have to trigger an output type upon PGI when an inbound IDOC changes the delivery.
please guide me.
Thanks,
NithyaHi,
Had a similar issue a few weeks ago...IDOC does not seem to call MESSAGING FM in WS_DELIVERY_UPDATE.
Might be worth taking a look at note 393096...
Can you check the 'NoOutputDet' parameter in transaction VL10CUC to see what it is set to?
Before I found this note I ended up writing a simple BDC that I called from the IDOC exits (starting new task) to simply wait 5 seconds then open the delivery in edit mode and then save. This obviously will trigger the output determination routines and trigger the print if it's applicable.
Regards
Stu. -
Invoice output type getting triggered after setting SY-SUBRC = 4 in routine
Dear Friends,
When ever invoice document is generated, if the invoice document is completed and if its accounting document is generated successfully, we need to trigger an output type for invoice ZRD0
For this purpose, we have created a routine 902 in our system. If the required condition, mentioned above, fails then SY-SUBRC set as 4 else set as 0 to trigger the output type.
Currently we are facing a problem, even after setting SY-SUBRC as 4 in routine 902, output type ZRD0 getting triggered.
Please help me to fix this bug.
Thanks a lot.
Best regards,
Amol Chaudhari.Hello Aditya,
I have maintained same code in both routines 'kobed_902' and 'kobev_902'.
Required code maintained in the routine,
sy-subrc = 4. " Do not trigger output type
* If the posting document is created or Billing document canceled *
* and if invoice document is Completely processed then the output *
* type ZRD0 is Triggered. *
IF komkbv3-uvall CA gc_c. "Invoice document is complete or not
IF komkbv3-rfbsk CA gc_ce. "For VF01 and VF11
sy-subrc = 0.
ENDIF.
ENDIF.
We are getting this problem on production client and not able to generate the scenario on quality.
The output type is actually an EDI output type which is generating an IDOC for the invoice.
Thank you.
Best regards,
Amol Chaudhari. -
Triggering output type using ABAP code
Dear Friends,
I am trying to trigger an output type by submitting RSNAST00 with all the required input in one of my ABAP program and I am getting error messages. See the code which I have written below and help me to resolve this issue. Also, suggest me if we have any alternate methods to do it:
ranges: range_kappl for nast-kappl,
range_objky for nast-objky,
range_kschl for nase-kschl,
range_nacha for nast-nacha.
move: 'I' to range_objky-sign,
'EQ' to range_objky-option,
vttk-tknum to range_objky-low.
append range_objky.
move: 'I' to range_kappl-sign,
'EQ' to range_kappl-option,
'V7' to range_kappl-low.
append range_kappl.
move: 'I' to range_kschl-sign,
'EQ' to range_kschl-option,
'ZNM7' to range_kschl-low.
append range_kschl.
move: 'I' to range_nacha-sign,
'EQ' to range_nacha-option,
'2' to range_nacha-low.
append range_nacha.
submit rsnast00
with s_kappl in range_kappl
with s_objky in range_objky
with s_kschl in range_kschl
with s_nacha in range_nacha
and return.
Thanks & regards,
Mallikarjuna MUse below subroutine.
Fill nast structure with whatever data you have.
PERFORM einzelnachricht_dialog(rsnast00) USING lv_rcode.
Advantages of using this are
1. If Output already exists and it waiting it will not submit new one.
2. You can control user name,date,time in nast entries. -
Hi All,
I have created one Z* output type and attached it with Z* program. and it is having routine called ENTRY_N. Now when i execute a transaction which will trigger my output type, is giving me error saying "Processing routine ENTRY_N in program Z* does not exist".
Can anyone help.
Regards,
Dharmesh> Hi,
>
> in the Driver Program have a routine with name ENTRY.
> just paste it.
>
>
FORM ENTRY USING RETURN_CODE US_SCREEN.
>
> CLEAR RETCODE.
> XSCREEN = US_SCREEN.
<i>> PERFORM PROCESSING.</i>
> IF RETCODE NE 0.
> RETURN_CODE = 1.
> ELSE.
> RETURN_CODE = 0.
> ENDIF.
>
> ENDFORM.
>
> and put the aboce code in it.
>
in the above code Perform processing you need include all your open_forms and write_forms, close_form. the data you are trying to pass it to script. i hope it is clear.you need to put that logic in the <b>form ENTRY</b>.
regards
vijay
Maybe you are looking for
-
I meant to pose this as a question.
-
Problem with JFMERGE using the last set of data on all form sets
b Here is the scenario... I have a file of data in character delimited format. Each record needs to produce the same set of forms. I used the Visual Transformation Editor to define the field nominated data file, including the ^form statements. The tr
-
Can not generate output via R/3 in extended classic scenarion
Hi, We are running extended classic scenario, but we want to keep printing, faxing orders via R/3. When an order is replicated from SRM to R/3, the output determination is not working. The messages screen remains empty although the output conditions
-
Hi, I am working on creating a build.xml which will compile my source code, and create a jar. My project that I need to compile though references another project...this is where I am having problems. Here is the scenario C:\projectA\src\HelloWorld.ja
-
Ordinal - what we've got here is a failure to communicate
I am running InDesign CS3 on XP. I know there are other posts about ordinal problems, but none seem to lead me to a solution. My many fonts work with ordinal in MS Word when typing numbers like 22nd, 36th, etc. However, the same fonts in InDesign d