MB1C and Physical Inventory

Hi experts,
I have try to Post one material using MB1c using 561 movenent type,while saving it gives a message"Delivery 180000014 created". I dont know how this message is coming and the stock also not get updated.
Then by using transaction code MI01 for the material it saying error message"Phys. inventory document cannot be created
Message no. M7450
Diagnosis
A physical inventory document has to be created, but the storage location is subject to handling unit management.
Physical inventory in Inventory Management does not support handling units.
please advice
regards
s

Hi
For MB1C
Try to understand whether a materia document has been created or not.
For this aim check MB51 with relevant parameters (that you have done MB1C such as material number,mov. type:561, posting date etc)
If not then this shows that it hasnt been done i mean no update.
Try MB1c again
For the other issue
You can use all the functions of Inventory Management, with the exception of the following:
u2022 Physical inventory in Inventory Management does not support Handling Unit Management.
check:
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOHU/LOHU.pdf
Hope will help
Best Regards

Similar Messages

Inventory management and physical inventory data transfer

hi all,
can anyone plz povide me with inventory management and physical inventory data transfer tutorial or link.
points are guarented.
rgds

The information behind the blue-button for MI34, MI38 (as you mentioned) does not have enough detail. It's basically one-page. Is there another instructional source available? How is the logical file MMIM_PHYSICAL_INVENTORY_DOCUMENTS tied to the physical, can you clarify? Not sure how to determine where the sequential file being processed needs to be located. Thanks!

Movement types and physical inventory posting

HI Expert,
All inventory differences are currently booked using SAP-movement types (MVT) 291 and 292.
Inventory differences have to be booked via the correct movement types in order to increase transparency to better analyze real consumption vs. lost inventories
For inventory differences during a physical inventory use MVT 701/702 and for inventory differences other than after a physical inventory use MVT 711/712. Currently these movement types are blocked for use in our company. So it needs to be implemented soon.So
1.I want to know if this action can be implemented.
2.Could you tell me what's the difference between the MVT291/292 and 701/702/711/712.
Thanks

.Could you tell me what's the difference between the MVT291/292 and 701/702/711/712.
291 na s292 are the movements type when in u can issues material to any of the account assignment manually like cost center , project wbs, network, sales order etc.
701/702 and the correct physical inventory movement type this are trigred only when u do proper physical inventor process in SAP for storage location which is not managed with warehouse management
711/712 and the correct physical inventory movement type this are trigred only when u do proper physical inventor process in SAP for storage location are managed by warehouse management.
U will have to remove the bloked movement type 701/702 to use Physical inventory process
hope this helps

PIAC Status and Physical inventory history

Hi Experts,
When Issuing goods / Posting material docs following error message is displayed.
"Serial Number XXXXX cannot be used - System status PIAC is active (EQU XXXXX)u201D
1. When cross checked with the relevant Inventory document, i could not figure out a relation.
2. In Physical inventory history -> Serial numbers, what does the following fields signify:
          i.   Equals:
          ii. CountedStck:
          iii. InvtBalance:
    Is there any relation with the PIAC status and above ??
Please assist
Regards,
Thushantha

hi
May be your MM person has posted the physical inventory for adjusting the stock for your material with serial number ,kindly consult with MM person on this.which may forbid the order for issuing the components
regards
thyagarajan

Physical inventory/stock taking, Asset tracking

Hello, I am trying to understand how asset labelling, tracking and physical inventory (stock taking) can be done using handheld devices directly on SAP. Pls let me know any leads/information. Thanks, SD

Hi
1.Post physical inventory document-MI01
2.Enter inventory count-MI04
3.Post inventory difference-MI07

Physical Inventory Status Flag Not Reset after Year End Inventory Procedure

Hi,
We are just done with the Year End Inventory Procedures, and to my surprise, a lot of Storage Bins are having their Physical Inventory status flag as ACTIVE, which they should not have.
An example bin has incorrect status-u201Ccountedu201D in the associated inventory record number . LINV status is L-cleared. LINK status is Z-counted, LINP status is Z-counted and physical inventory flag is ON in table LAGP, but status must be L-cleared and physical inventory flag should be OFF (or blank) in table LAGP.
Our users did not use LI20 to clear the empty bins or bins had no difference to post (meaning book qty & count qty are the same).
I already tried the Program RLREOLPQ and OSS Note 824904, but no its of no use in our Case.
Any guess/hint for the problem?

I solved this with thehelp of a Zprogram writeen wrt the OSS note mentioned above in the question.

Physical Inventory Difference List

Hi SAP Gurus,
Is there any T-Code other than MI20 for getting Physical Inventory Difference List. We want Physical Inventory No. (IKPF-INVNU) and Physical Inventory Ref (IKPF-XBLNI) both in the list. But in MI20 only Physical inventory No. is visible.
Full Points if helped.
Regards
Ishu

hi, can u check the required information from through
ISEG & IKPF table

Help needed in Physical Inventory

If we are doing Physical Inventory in IM locations and we go ti MI01 there are tabs for Physical Inventory number and Physical inventory reference.
I understand why they are used just by clicking F1 over there, but how do we create those number.
Do we group different Physical Inventory Documents .....I am not able to understand how to use those fields.
Can anybody help me out in that.
Thanks
Mike

Hi,
It's a physical document number used outside SAP system and the same is mentioned over here (Similar to any reference field like reference number in Tcode: MIRO).
Grouping Physical Inventory Documents by Physical Inventory Number
Above the physical inventory document number, there is a physical inventory number. You can use this to group physical inventory documents that belong together organizationally in order to manage them more efficiently. This allows you to display the physical inventory documents for a particular month or department directly without having to search the list of inventory differences.
You issue physical inventory numbers when creating and changing physical inventory documents. To do this, enter a number or term of you choice on the initial screen or in the Physical inventory number field in the physical inventory document header.
(Physical Inventory number which will be used in report requirements and for grouping purposes so that you can have reports based on this input. (Just check reports MI22, MI24 etc))
Hope this helps.
Thanks,
Viswanath

Physical inventory( batch input)

i have a question in Physical inventory...i want to know whether we can use a batch session to upload count results using MI34 for a physical inventory count...if yes can anyone explain how to do that by using a text file...
Message was edited by:
srisha mandava

Hello,
Please refer node : Inventory Management and Physical Inventory Data Transfer
in IMG
Inventory Management and Physical Inventory Data Transfer
The data transfer workbench is a central transaction for the automatic transfer of data from a legacy system into the ERP system. It offers the tools required for the initial and subsequent data transfer.
The complete documentation about the data transfer workbench is in the SAP Library:
CA - Cross-Application Components -> CA - Data Transfer Workbench
The documentation tells you step by step how to carry out the data transfer, and which object-specific special features you should be aware of.
I hope this helps.
Pl. reward points for useful answers
Thanks & regards,
Avinash

Table and field name for Physical Inventory

Hi Experts,
As i have to put radio buttons with 2 blocks in a report for Phys. Inventory. Please tel me the following fields:-
Block1. Table name and field ( flag field) that shows physical inventory completed & not completed. (so many indicator fields but i want exaact one) or any other way to no PI done or not.
Block 2. Table name and Field( flag field ) for Physical Inv. Still to be executed , Physical Inv. Still to be Closed, Phy Inv. Executed, Phy Inv. Active Again.
Regards
Nikhil

go to se80
click on repository information system
expand ABAP Dictionary
expand fields
double click on table fields
on the right side of the screen type the description of the field you want to know and execute to know the field name and the table where it is used.
follow the above steps to search by yourself rather than posting each time
regards,
srinivas
*reward for useful answers*

Doubt in physical inventory regarding gain and loss

Hi Experts,
Kindly let me know, what we will be doing while we face gain of some materials during physical inventory and loss of some materials during physical inventory?
Regards,
Prasath

hi priyanka,
i am getting an error while i am trying out this. i am counting stocks in quality inspection also. there i am getting more stocks, so, i have tried to post the (gain)difference using 701 but it is showing an error
" Reason 0701 for movement type 703 not defined "
and then i tried with movement type 703 to post the difference, again it is showing another error like
" Entry 0703 does not exist in T157D (check entry) "
Is there any movement type especially to post gain/loss in quality stock in physical inventory ??
how could i resolve and post this gain in quality stock. kindly help me.
Regards,
Prasath

Physical inventory with and without handling unit managment

Hello all,
I would like to know what is the difference between physical inventory with and without handling unit management.
Pl. advise.
Thanks,
Maxx

Assuming you are referring to WM inventory, it is very similar. Inventory is conducted at the SU level in WM if you are HU managed. One of the most widely known issues is the lack of ability to post differences of nested HUs at the WM level. If you are not using nested HUs, the process is the same as storage unit management without handling unit management.

Physical Inventory documents mass delete and reference in material document

Dear Experts,
I have 3 questions,
1. Is there any option to mass delete physical Inv documents
2. How can i know if the physical inventory documents are posted (MI07) or not yet
3. If i see any material document of mov type 701 or 702, there is no reference of physical Inv Doc # in it. How can i know that this material document is created as a result of which physicl Inv document.
Appreciate your help
SAPXPT

Hi,
"1. Is there any option to mass delete physical Inv documents"
Yes You can delete the Physical Inv Documents with MIAD but for that you need to maintain one variant with it and copy all the Document no. in TEXT file paste in the in Archiving Selection's.
"2. How can i know if the physical inventory documents are posted (MI07) or not yet"
Please check ISEG table and provide the time Period as search menu so that you can see all the Doc's posted on today's date.
"3. If i see any material document of mov type 701 or 702, there is no reference of physical Inv Doc # in it. How can i know that this material document is created as a result of which physical Inv document."
go to MB59 and check the Material documents with respect to Movement type and date. and the difference you will see in MMBE as per the movement used.
Regards,
Ninad Kshirsagar

WM-Implem -Physical inventory and Month end process- Need configuration

Hi
    Iam doing WM implementation, i need to know what are the configuration required for Physical inventory and
    Month end process .
    kindly suggest me
    With Regards
    dinesh
Edited by: code acess on Dec 7, 2011 7:55 AM
Moderator message:
Locked. Reason: basic question
Please search before posting question.
Edited by: Csaba Szommer on Dec 7, 2011 8:27 AM

Hi
There is no standard settings for your requirement. With a help of abaper you need to define an enhancement.
Regards
Antony

Physical Inventory and snapshoot inclusion

Hello,
I have a question about physical inventory. When I took a snapshot and created tags of the subinventory not all the items were included in the snapshot.
I noticed that the system takes snapshots only on the items that have transactions in this month only. Is this true or is there another reason?
if YES, How can i take all items in the subinventory in this snapshoot?
thanks

That does not make sense. A tag should be printed if you have onhand no matter when the item was transacted the last time.
Verify that you did not limit your physical to a certain subinventory.
Try it in another instance that is more than a month old. If what you say is true, you should get very few tags.
If the behavior continues, you may have to raise an SR to get a patch.
Hope this helps,
Sandeep Gandhi

MB1C and Physical Inventory

Similar Messages

Maybe you are looking for