MB1C error

Hi
I am facing this error while material posting using t. code MB1C.
initial screen, i have given movement type 561, delivery plant, storage location.
next screen i have given material name & qty also but while saving the material posting, it's giving below system error.
system error in program -RGIMF000
in include - RGIMF000
in line - 1238
The data object "GLU1" does not have a component called RSPONSORED_CLASS".
please how to solve this.
thanks

Dear yesu padam
If you are working on an upgraded system and receive the error message u201CThe data object "GLU1" does not have a component called "RSPONSORED_CLASSu201D.u201D when trying to post the data, refer to SAP Note 377053.
thanks
G. Lakshmipathi

Similar Messages

MB1C Error "Storage Bin 450 does not exist Check your entry"

When doing MB1C error message says
:"Storage Bin 450 does not exist Check your entry"
I have maintained all movement types, storage location well. I have not created any storage Bin then why it is asking for this?
Please help for solution with steps.

Thanks for your answer. My problem is different but I resolved it myself as under:
Log Execution->Shipping>Picking>Lean WM-->Define control parameter and no. Range....All three tabs were set.Here in check box I tick mark as Active Lean WM.
Then went to Control Plant /Storage location/Warehouse No Assignment
Here Plant/Storage Location/Warehouse were given
Degree of activation=1
store tye for picking in LWM=005
So Lean WM was activated. So in MB1c this error was disappeared as I had activated Lean WM.
But another error came "There is no item category assigned to account 799999/4050" This is related to field status group in G/L account but still not solved.I am missing Commitment Item in tab Create/Bank/Interest in my G/L account. I tried to run program RM07CUFA in SE 38 saying error No MM group in 3 tabs but could not further identified.
Above issue was resolved sothread is closed.

Enter Other Goods Receipt - MB1C Error

Dear Friends:
When working on Enter Other Goods Receipt -I entered Material,Qty,UnE and pressed enter, I got the error
'Account determination for entry SANO GBB ____ ZOB 3000 not possible' and
'No stock posting possible for this material'.
How to overcome the problem? Please advise.
Regards
MSReddy

Sridhar,
Just check in OBYC tranc. whether for tranc key GBB, you have maintained the combination of valuation grouping code you are using, general modifier ( ZOB) and valuation class ( 3000) and the G/L accounts.
If not, please maintain the same.
Enjoy,
Vidyadhar.

MB1C-error:material is blocked??

The process: MB01->LT06->MB1C->LT06
When for multi records with the same material BDC processing, there is 'material is blocked' at MB1C, how IT occursed?
Thanks!

Hi,
Pl check whether the TO is confirmed or not?
Use Tcode LT12 after the TO Pl.
Thanks & Regards,
Nagarajan

Error while posting mb1c

He seniors,
I am getting error while posting stock in T. code- MB1C
Error- G/L account 799999 dose not exists in company code.
dear seniors please suggest me what is menu path or t. code and what are the settings I should maintain their
thanks......

Dear Sundyeep,
As already explained,please search in google or forum before posting,you can copy paste your error massege in google,it will provide you the relative links.Read the threads at the top of forum.For your error go through this link:-
CHART OF ACCOUNTS (MOST URGENT)
Or use Tcode OBC4 and OBC5 to define and assign field status variant to Company Code.
Thanks,
Davinder
Edited by: davinderpalsingh on Sep 5, 2011 3:04 PM

Not able to post material in MB1C. Please help with proper answer.

Hi I am posting material in IDES thru MB1C, since i am not allowed to do PGI if i dont do a stock upload.
While doing MB1C error is below
"MB1C=Period 003/2008 is not open for account type S and G/L 799999."
I used the below transaction and written the status.
OMWD=
Val area       Co Code   Company name      chrt/Accts     Val. Grpg
BK00                 BK00        BK            INT                0001
MMRV:
Posting periods
Current period    03 2008
Previous period 02 2008
OBYC:
VAL AREA GENERAL MODIFICATION    VALUATION CLASS    DEBIT          CREDIT
BKOO                                                         BSA      7920                          799999     799999
i dint not use OB52 , i dont know how to assign.
Please reply with proper and describtive answer and proper assignment.
Points would be awarded if the problem get solved. \
my AOL id is supratiproy, any one can ping me as well.
Please help it is very urgent.
Thanks & Regards
Supratip

Hi,
Go to SPRO.
Financial Accounting -> Financial Accounting Global Settings -> Company Code -> Enter Global Parameters -> Select the Company Code you are processing.
Check the Posting Period Variant.
in OB52
For that same variant for Account Type S, in Column From Period 2, make it as 1 and in To period (next to that) change it to 16 and also year as 2008, Save.
Hope this helps.
Thanks
Krishna.

No stock posting for this material

I have create a material with item category LEIH for returnable packaging,while doing stock posting in MB1C error comes as "No Cmaterial posting for this material".plz help how to post the material.

Duplicated thread no stock posting for this material
Please close this post.
Regards.

Error while creating stock using tcode: MB1C

Error while creating stock using tcode: MB1C
The Error is: Check table T004F:entry G006 does not exist

Hi ,
Please check the FSV (field status variant) for your company code in OBY6 .
then go to transaction code OB14 --> enter the FSV --> Check if field status group G006(Material account) is maintained there or not.
if not please maintain it.
Thanks & Regards
Anshu

Error while saving INtial stock upload thru t-code MB1C

I am getting an error while saving the entered material quantity for initial stock overload thru MB1C
the error is "FOr object RF_BELEG GB10, number range interval 49 doesn't exist FBN1..
I am from SD module. Please help me resolve this issue.
THank you
Brian

Dear Brian
When you are carrying out the MB1C Txn, system document for account ing for the current is not existing, so you are getting this error.
Use FBN1 you will bet the screen Number Ranges for accounting Documents enter Your company code here "XXXX" then click the Intervals push button, you will go to the screen maintain number range Intervals , Check for 49 serial number whether you are having a number range for the current period if not then use the Insert Interval + button and enter 49 ,Year and the from & to number ranges. You can repeat the last years no. range in the current year also.
Best Regards
SAM
Edited by: samuel mendis on Apr 8, 2009 6:26 AM

Error in creation of stock thro Tcode MB1C

Hi,
while creation of stock thro Tcode MB1C i got the error posting period mentioned as 12/2002 to 11/2002.
I tried using Tcode OMSY to update my company's period and year as current year but it is grayad out.
Please advise
Regards
Ramya

Hi,
OMSY setting is used only for once & for all to fix up the Initial Period and Year for a company code for material management. After setting in OMSY, nobody should touch this setting.
Now 1st check in MM side in MMRV t.code which period open for your company code & back posting allowed or not. If period 11 & 12 not open, you can open in t.code MMPV
And also check in FI Side in t.code OB52 which period is open for in all Account Types A, K, D,M, S and specially Account Type u201C+u201D which stands for valid for all accounts types . If periods 11 & 12 not open, you can open for all account types.
Note:
Check your fiscal year variant for your company code in OBY6 t.code. If it is K4 , then open periods {Period start from January(01) & end in December(12)}. If it is V3 , then your periods {Period start from April(01) & end in March (12)}
Regards,
Biju K

SAP posting period error while mainting stock in MB1C

Hi,
Error Description:-
While I am maintain the stock in MB1C i got an error i.e.
Error:- Postingonly possible in periods 2006/12 and 2006/11 in company code CLC1 ( CLC1 is mycompany code.)
To resolve this error I did some pre-requisite,
First :- In OB29, I define my fiscal year variant ( Here, I copied the K4 andrename S4 and save )
Second :- then, in OB37, I Assign fiscal year variant to company code.
Third :- I define variant for open postingperiod, ( Here, I define my ownvariant to use the following menu path - IMG-- FAFinancialaccounting global settingsDocuments-- Posting periods--Define variant forposting periods).
Forth:- in OB52, i define the open and close posting periods ( Here, in new entries i choose my variantwhich i define in 3rd step and define myperiods).
still system not allowing me the current dated posting, then i use the following step to resolve the error,
I mgoing to MMPV for close the periods. (here I closed all periods, month wisetill 2012/01).
stilli got the same error, so Icheck MMRV & OMSY, weather postingperiods change or not.. ( Here, systemshows me backdated posting periods i.e. 2006/12).
Kindly help me to resolve this error.
reg.Mayur

Hi,
As you Said i closed each period as well as fiscal year , but still my problem not resolved .. system shown me following notification after i closed the period..
Mode: Close period only
Client:800
Period entered (month/year):042010
Invalid period for company code CLC1; no conversion here.
Period closing complete; log issued.
Mode: Close period only
Client:800
Period entered (month/year):012012
CoCd CLC1: table T009B incomplete; no conversion here.
Period closing complete; log issued.
Mode: Close period only
Client:800
Period entered (month/year):022012
Incorrect period in control rec. of CoCd CLC1; no conversion
The current period (month/year) of the control record is122006
Period closing complete; log issued.
E N D

Error while uploading stock using Mb1c and migo

Hi
Following error is showing,while uploading stock using Mb1c and migo
Return code 8 is not permitted with BAdI 'FAGL_PERIOD_CHECK'
Can anyone help me?/
Thanks

Hi
You will need the help of an abaper in solving this , as a BAdi FAGL_PERIOD_CHECK - Posting Period Check has been activated.
Please check the implementation of the BAdi , i feel that it has not been implemented properly.
This Business Add-In (BAdI) enables you to extend the existing check of open posting periods.
The result of the period check is provided to you as a parameter (CH_SUBRC). In your implementation, you can derive this parameter again (for example, if a posting is rejected under a certain condition).
The following values are allowed for parameter CH_SUBRC:
0 Posting allowed
4 Period & is not open for account type & and general ledger &
6 No authorization for posting period & &
This is a custome developemnt , so only the ABAper present at your end will be able to resolve it.
Thanks & Regards
Kishore

Error while doing MB1C

Hi All,
I'm working on IDES, I got a error while doing MB1C with movement type 561. Error is "Error accessing functional module : FMFK_FIKRS_READ. Parameter : IP_FIKRS, IP_FMA_OBJNR"
Regards
Nagendra

Hi Lakshmipathi
How to deactive the functional module ? Just now I had checked Functional Module, IP_FIKRS is Financial Management Area and IP_FMA_OBJNR is Object number. If I deactive does this leads to some other problem ?
Kindly guide me.
Regards
Nagendra

Error while posting material in MB1c

Hi
how to open finace period in OB52 for period for 002/2009 as am getting error while posting in MB1c the error which am getting are period 002/2009 is not open for account type s and G/L 799999.
Kindly help.
Thanx.

Hi Mukesh
In OB52, you dont specify the GL account, you just open periods for the sub modules within FI.
However, If you are getting an error while posting MB1c it must definitely be due to the MM periods not being opened
Please go to MMRV - input your co code, and execute, it will tell you the current period which is open
If your current period is not open, go to MMPV, input ur co code or codes, enter the new period and execute.
This should solve your problem
Rukshana

Error while posting goods in MB1C

Hi All
I am trying post goods mvt type 561 in t-code 'mb1c' . I am geting an error message saying:Field selection for movement type 561 / acct 799999 differs for Vendor goods
movement (014) Message no. M7093. I am sure that there is some FI configuration
is missing. Please guide to setup FI side configuration for this issue.
Thanks
Prasead K

hi prasad,
try TCODE:OMWB
and give material number to which u want post goods
in movement type field give 561 and enter
then select account assignments button
next screen select screen layout button
here u can find the difference field selection for the gl acc and mv type so correct them.
definitley this will solve ur problem
thanq
sandhya.
Message was edited by:
 sandhya reddy

MB1C error

Similar Messages

Maybe you are looking for