MB1C for 521 mvt types

Hi,
I was doing MB1C with 521 mvt type (Receipt without order ) .
Then its asking for the 'order no' , which is shown as mandatory field.
Why it is like this , if it is receipt without any order no , why it should be a mandatory entry.
Can anyone please help me?
regards,

Hi,
It appears from the selection you made for the transaction, order  number is not required. But , the actual functionality depends on the customisation done.
Please check the option entered for the field "AUFNR" for the movement no 521 , usig the following menu path in SPRO :
SPRO - Inventory Management and Physical Inventory - Settings for Enjoy Transactions - Settings for Goods Movements (MIGO) - Field Selection per Mvt Type.
For movement type 521 , the option of "optional field " should be selected.
Then your problem would be solved.
How ever consult other functional experts at your place as , this selection is generally a business strategy/requirement ( after the initial activities , some of such functionalities are intentionally restricted , to improve accountability)
Regards
Raghuramam.

Similar Messages

  • Add New field in OMJJ for MB1B mvt type: 303

    Hello Experts,
    I need your help in resolving an issue:
    I am tring to add a Field: "LFSNR" in OMJJ for Tcode: MB1B and Movement type: 303. but i am getting the error: "Field LFSNR is not
    allowed for transaction type 303" as this field doesnt exist in table: T156B / MIGO_CUST_FIELDS.
    Please help me with your thoughts as how can i add a new field to T156B / MIGO_CUST_FIELDS and then in OMJJ for 303 mvt type.
    We are on ECC 6 EHp4.
    regards
    Venkat

    Hi Venkat,
    You may check this first: Re: Scrap HU via HUMO - mvt type 551 doesn't req internal order
    Thanks,
    Gordon

  • Inspection Lot not creating for 657 mvt type

    Hello,
    I am unable to create inspection lot for customer returns. Mvt type used by SD module for customer return is 657 ( to blocked stock). While sales to return order with this mvt type, no inspection lot is getting generated.
    But when returns are done with 651 mvt type (Returns to QI), I am able to create inspection lots.
    Can anyone tell me how to activate inspection for 657 mvt type as I want this stock to go directly to Blocked stock.
    Thanks in advance.
    Jason

    Dear,
    Quality inspection stock (movement type is  655)
    Blocked stock (movement type 657)
    If the given quantity is posted to blocked stock returns first, you can make a manual goods movement posting in the Inventory Management component to transfer the quantity to valuated stock.
    Tcode vov6 - there will be schedule line category DN.
    go to details of DN.In Business data,check which movement type is assigned here change it to 655 and try.
    Also go to material master, select "Quality Management" view and execute. There click on "Insp.setup" and press "F5". Assign "06" under tbe tab "Inse.Type" and save.
    Now if that material returns from any customer, the stock will be blocked for quallity clearance. Only quality people can give clearance for that material.
    Regards,
    R.Brahmankar

  • Automatic creation of Purchase order not possible for 103 mvt type

    Hi,
    If i could configure "create p.o automatically", while doing G.R for mvt type 101,
    why cannot i do the same with 103 mvt type.
    I checked the checkbox "create p.o automatically" for movement type 103 and tried to do G.R for others using Mvt type 103.
    It is throwing error as "Update control of movement type is incorrect (entry 103 x x).
    Which entry controls the above my requirement?
    Please advise .
    Thank you.

    Hi,
    These are std which is provided my SAP, you can configure for automatic PO creation for 101 movt type only..........

  • Message determination for 103 mvt type

    Hi all,
       Can any one please tell me the reason for "Incorrectly Processed" message output for 103 movment. We have maintained all the indicators and output tab is getting appeared in the material document, but the status of the message shows "red colour".
        We are not able to understand the reason for the incorrect processing of the message. Whether this is related to the "Print Parameter" which is maintained as Plant / storage location combination.
    thanks & regards
    Chaitanya Rayaprolu

    Hi sir,
    Iam new to SAP but juz giving a try to answer your question. 103 mvt type is for posting to GR blocked stock. ie. no accounting docs are generated. Are you trying to post to blocked stock or GR block stock.
    Pls note that both are different..!!
    Pls excuse me if Iam wrong...
    Thanks & regards,
    ashwin_.

  • Print for 122 mvt type

    Hi Gurus,
    I getting the print of mat-doc for rejection using 122 mvt type.
    But When Quality Dept reject the matrial, through QA32,  but not able to get print(it's also 122 mvt.type)
    Please how to get the print, any suggestions.
    Regards
    Ramu

    Hi Ramu,
    Please check which "Output Type" is getting generated for 122 done separately and with QA32. (Ex. WA01). And if it is different plz check whether settings are made in SPRO(M706) and also maintain master record for output message (MN21).
    Plz try this.
    Thanks
    Nilesh

  • Billing for 251 mvt type

    Hi SD experts,
    Anybody experienced creating billing document against material docs created through 251 Mvt Type ie "consumption for sales without sales order".
    This is very important for us. Full points will be awarded for explanatory ans.
    Regards,
    santosh

    Dear santhosh
    I have not experienced this scenario.  But using this movement type (251) if you have not entered a customer order in SD,  In the standard system, the movement is assigned to a cost center. The goods can only be withdrawn from unrestricted-use stock. Possible special stock indicators: K
    thanks
    G. Lakshmipathi

  • Missing parts not checking for 101 mvt. type

    Dear SCN's,
    I have configured missing parts and also assigned MRP controller and availability check in material master. And in movement type 101 wrt PO 'B',  I have assigned checking rule but still system is not checking while posting GRN. Please suggest where I went wrong.
    Regards,
    Kumar

    Dear Jurgen,
    Please check the attached document and guide were I went wrong.
    Then I did testing, first I created reservation against the material with 201 mvt. type and then created PO and then did GRN but Im not getting any message as described. Please check.
    Regards,
    Kumar

  • Batch for MB01 (mvt.type 102 &  544)

    Hi,
    i´m trying to do a
    batch-input for transaction MB01.
    The movement types i´m using are 102 and 544.
    The question is that if i process two registers of the corresponding internal table i get the following message.
    Message M7021
    Deficit of PU GR quantity 5.000 HOJ : 01312UE1113PL122 1000 1200N C000000482.
    What does it mean? (i´m sure there´s enouh stock of the material in question).
    How can i solve this problem?
    I´ve tried to use BAPI_GOODSMVT_CREATE but i get the same message.Best regards.

    Hi,
    in case someone´s interested i finally solved the problem adding
    MSEG-MBLNR and MSEG-ZEILE in the batch thus:
    set_dynpro-> 'SAPMM07M' '1201'.
    set_field-> 'BDC_OKCODE' 'SS'.
    set_field-> 'RM07M-BWARTWE' '102'.
    set_field-> 'RM07M-LGORT' i_pro-lgort.
    set_field-> 'RM07M-EBELN(01)' i_pro-ebeln.
    set_field-> 'RM07M-EBELP(01)' i_pro-ebelp.
    set_field-> 'RM07M-WERKS(01)' i_pro-werks.
    set_field-> 'RM07M-LFBNR(01)' i_pro-mblnr.
    set_field-> 'RM07M-LFPOS(01)' i_pro-zeile.Best regards.

  • Serial numbers are not copied to new storage location for 311 mvt type

    Hi Guys
    I have 10 stock of material A in 001 Storage location ,which all the quantity is serial number managed
    I have transfered 10 quantity of Material A to 002 location from 001 location using 311 MIGO
    But serial numbers are not copied to 002 location after transfer posting
    001 and 002 are both are WM linked and belongs to same plant
    Can any body suggest good solution,how it can be done

    Hi
    1.Check in material master whether serial number management is active in Plant data/stor Tab and serial number profile is assigned
    2. Check while doing MIGO once if u enter the material and transfer qty you are getting the serial number tab or not
    3. If everything is ok, then after posting the document check the serial number status in IQ09, check the stock type and the storgae location in the serdata tab
    Regards
    Amuthan M

  • Report for Mvt Type 103 & 105

    Dear Gurus,
    Is there any report which will show the corresponding material document of 105 MVT/ 104 MVT type  for 103 MVT type Material document
    Regards,
    Rajesh

    Hi,
    What you have to do is:
    Enter Tcode MB51...Enter Mvt type 103  and in to enter 105..
    Now clcik on F8 Button...It will display you the result as per what you have expected..
    Cheers!!
    Utsav

  • Automatic TO Creation and Confirm for the 321 Mvt type

    Hello Experts,
    Like to know the customisation invovlved for automatic TO creation and confirmation for the 321 movement type in which QM is activated.
    I have already activated in OMKZ as below
    1.Automatic TO for 321 mvt ytpe
    2.TO item to be confirmed immediately
    3.Propose confirmation
    Table T333 -AUTTA
              T333-SQUIT &
              T333-VQUIT is activated.
    Please let me know any other settings to be performed
    Regards
    Krishna

    Hello Experts,
    I am trying to create the Automatic TO and TO confirmation for the mvt type 321.
    I made the below settings
    I have activated in OMKZ as below
    1.Automatic TO for 321 mvt ytpe   -"A"
    2.TO item to be confirmed immediately  - tick mark
    3.Propose confirmation   - tick mark
    Table T333 -AUTTA
    T333-SQUIT &
    T333-VQUIT is activated.
    I have activated in OMKX as below
    Table T321-TBFKZ Immediate TO Creation with "A"
    T321-TAFKZ TR creation with "X"
    After doing the settings i am not able to see the Posting change number in the Material document created for the mvt type 321.
    Please let me know how to create the Posting chnage notice for the material document and how to convert the Posting change notice to automatic TO and confirmation.
    Thanks & Regards
    Krishna
    Edited by: Hariharan krishna on May 25, 2011 8:01 AM

  • Inventory load using 561 movt type and auto confirm TO in MB1C using 561 movt type

    Hello All,
    I am doing the inventory load using 561 movt type in MB1C. Then the material is in 998 storage type and bin "AUFNAHME". my requirement is that i want to confirm the TO, when i do the MB1C itself for the 561 movt type. Is there a way in the SAP, where i can trigger the TO confirmation in the background automatically, when i use 561 movt type in MB1C.
    Right now my thought processing is that as below,
    i create the inventory load using 561 movt type in MB1C and use the LT10 and move the stock to a different bin and confirm the TO.
    In the above step, i am using LT10 as a extra step for confirming the TO, which i am trying to decreasing my configuring in such as way for the movt type 561, so that it will automatically confirm the TO in the background, while doing the MB1C.
    My 2nd question is, when i have 5000 different materials, which are inventory loaded using 561 movt type and MB1C. I am trying to auto confirm the TO in the background, when doing the MB1C for 561 movt type itself.Secondly, if it doesn't work, then i can goto LL01 and pick the unconfirmed TOs and mass confirm the TO's.
    On the whole, my questions are is there any std config in SAP to auto confirm the TO for movt type 561 in MB1C. If it is not possible, then i need the best way to mass confirm the TO's in  SAP.
    Thnks,
    Kapil

    Hello Kapil,
    Let me explain the process step by step
    Assumption/mandatory criteria-  The process is applicable only in case you do not have storage unit management active  This process is warehouse transfer w/o WM transaction. This method is based on principle of MB1A- 711/712 movement type.
    (1) Use OMJJ and create new movement type by coping 561 for ex- "Z61". In field selection (flield selection from 201) double click on WM and make the entry "WM storage bin and storage type as required entry from suppress.
    (2) Now use MB1C with above customised movement type. At the end of this transaction,system will take you to the screen to  make an entry in storage type and storage bin. Post the entry.
    That's it. Your stock would be in warehouse as well as IM stock would be in sync. There is no TR/TO. You can create LSMW to upload the data by this method. If you have SUT defined then you can follow the same process as above. But after that do not forget to update LQUA-LETYP field with respective SUT. However, you can not use this method in case you have SU management active.
    My view with this upload process-  Please use other data uploading method which are not at all time consuming. In more than 90% of most of the business scenarios, storage unit type is used. Hence you will have to perform additional activity of updating LQUA-LETYP-storage unit type field. If this is the case, then why cant you use other uploading method?.
    Thanks,
    Milind

  • I WANT TO FIND material report for 303 mvt

    i want to find the report for 303 mvt type plant wise but their 305 mvt type has not still done
    i gone through the mb51

    Hi,
    Try With SE16 => MSEG => enter Movement and plant from-to....
    Regards,
    Ninad Kshirsagar

  • Append list values under Field selection per Mvt type (MIGO)

    Hi Experts,
    Can we append list of values for u2018Field Nameu2019 in case of Setting for goods movement (MIGO), under Field selection per Mvt type. We want to append values for 101 Mvt type.
    Current values are
    CUSTNAME Customer
    EXVKW Sales Value
    GRUND Reason for Movement
    LIFNR Vendor
    SGTXT Text
    WEANZ Number of GR Slips
    WEMPF Goods recipient
    Regards,
    Praful Mankar

    Hi pafulmankar
    If you find the solution, please share with me. I do have the same requirement
    Thanks

Maybe you are looking for

  • Scripting for Conditional Advanced Actions disappears after saving - title remains

    Hi, for the third time in a 24 hour period, after painstakingly entering 14 lines of variables and actions, the contents of the conditional AA script that I saved disappeared.  Yes, I saved all of them!  The name I gave it remains on the list of Adva

  • Thumbs show but large pics don't show.

    I finally did the big move of 15gigs of pics to my external hard drive. Now when I use iPhoto from my external hard drive a good portion of the pics only show up as thumbs. When I click on a shot it just spins and spins with no pictures showing up. W

  • Sales order Costing mark and release

    Dear all, Kindly help on the following issue:- Can we mark and release Sale order costing like product costing(in CK24). best regards, Gaurav

  • Ufsdump and ufsrestore with multiple volumes

    How to ufsdump and ufsrestore with multiple volumes? I want to backup and restore a large directory with ufsdump and ufsrestore, so it requires multiple tapes (two in this example). After backuping tape 1, I press the eject button of the tape drive t

  • Mozilla requiring click to run jre 6 or  7 currently

    https://blog.mozilla.org/security/2013/01/11/protecting-users-against-java-vulnerability/ "Mozilla is aware of a security vulnerability in the current version of Java (Java 7 Update 10) that is being actively exploited and affects any browser using t