MB26 - Activate "Sales Order"  as Selection Criteria

Dear friends ,
Is it possible to activate field "Sales order"  as selection criteria ?
Best regards,
Ale

Hi,
The field is already in the report.
What do you mean by activtion of field.
If you want to make it mandatory then you can create a variant and you can make sales order field as the required field.
Regards
k

Similar Messages

  • Error in sales order when selecting a warranty item in configurator 'Please enter required information - Service Reference Type Code'

    Error in sales order when selecting a warranty item in configurator 'Please enter required information - Service Reference Type Code'
    Not able to book the sales order because of this issue

    Order Management does not support the inclusion of optional service items in a configured Model BOM (see Support article #1296751.1 for more detail).  Allowing for such would therefore require customization.
    As you've found, there's no modeling restriction that prevents you from creating a Model BOM that includes optional service items, nor is there any problem with creating a Configurator Model for it.  And required service items (such as a warranty item that is a required child of an optional BOM component) do not present a problem; they have nothing to do with Configurator, and would never appear as sub-lines in OM.  The problem arises in OM, which requires that any service item be "associated" to the item it's "servicing".  OM does not automatically make such an association with service sub-lines, even though it might be argued that an association may be inferred by the BOM structure (i.e., OM does not assume that an optional service sub-line is necessarily associated, from a service standpoint, with its BOM parent).  OM customization is therefore required in order to hook any service item up to its corresponding product item.  Many customers who configure service along with product have implemented such a customization.
    (Another gap in such a solution that may be relevant to you is that for an included optional service item requiring recurring billing, Order Management does not create the requisite Service Contract.  Customers have likewise developed customizations to address this, as well.)
    As this is not specifically a Configurator matter (you could have created your order without using Configurator at all, and you would have experienced the exact same behavior), please do not take my explanation as being either authoritative or comprehensive (I am a Configurator expert, and only knowledgeable enough about Order Management to be dangerous).  It would be advisable for you to seek more detailed information/recommendations from the Order Management forum.
    Eogan

  • How to activate sale order type in CFM1

    Hi,
    I want to include Sale order type in CFM1 transaction to restrict specific Sale order types along with Plant.Is there any report or Tcode which will enable this field or we can only achieve through exit.
    Thanks
    Venkadesh

    Hello,
    Please check BAdi CIF_INT_MODEL method MODIFY_OBJECT_LIST Modifying list of filter objects.
    BAdI solution although it fulfills the general selection options.
    Also refer consulting note   902968 - No user exit/BADI to influence selection in CFM1
    Best Regards,
    R.Brahankar

  • Dealer Portal - Vehicle Sales -  Maintain more selection Criteria

    Hi,
    In Dealer Portal, Vehicle Sales --> Work Overview, I am getting the below error.
    Error message: Maintain more selection Criteria.
    What configuration is missing? I am Portal consultant, Please provide step by step procedure to fix this.
    Kindly support.
    Regards,
    NS

    Any solution???

  • VA01 - Sales Order - Cannot select Material relevant to Customer

    Hi Gurus,
    I tried to create a sales order VA01. I have put a SP and when I try to select his matching material, the system cannot find it when pressing F4 into the item field.
    However, both customer and material have been created for:
    - Same Sales Area
    - The pricing procedure RVAA01 has been maintained in the Customer MD + at Sales Area Level
    - The pricing condition PR00 is maintained at: Customer/ Material level
    Can anyone help me find where the problem can come from.
    Thank you.
    Chris

    Hi guys,
    Thanks for your support so far. The system tells me this:
    No Item category available (Table 184 ZAM NORM)
    ZAM is a Z- sales document which is a direct copy from OR a sales order.
    Regards
    Chris

  • Execute MRP for Sales Order with selected Warehouse

    Hi Experts,
    When we execute MRP Scenario which include Sales Order. Can MRP only include Sales Order by Warehouse?
    For example:
    1) We include existing stock for Warehouse-A in MRP Scenario.
    2) We include Sales Order in MRP Scenario.
    3) We have two Sales Order created, 1st SO is taking from Warehouse-A; 2nd SO is taking from Warehouse-B.
    4) I notice that both Sales Order Qty will appear in MRP simulation.
    Is there any place to configure to resolve this problem?
    Thanks.
    Regards,
    Lay Chin

    Hi Lay Chin,
    By the current B1 design, MRP is only working on the item level.  That means it consider all on hands in regardless of warehouses.  It is not configurable to warehouse level.
    Thanks,
    Gordon

  • BOM selection in sales order

    hello, friends.
    when selecting the BOM in the sales order, the selection screen displays alternative BOMs for 1 usage type only, and will show the other usages one at a time only if the first type does not exist.  the sequence depends on the priorities (access sequence) set in IMG, and settings in item category. 
    my questions are:
    1.  does the 'next page' button in the selection screen refer to additional BOMs of the only same usage type?
    2.  is it possible to show other usage types in the same selection screen? if yes, where do we configure this
    many thanks for your inputs.

    hello, Rags.
    actually, BOM selection is working fine for us.  my question was more of a theoretical one.  to clarify the issue, let me cite an example:
    1.  for material A001, i create 5 alternative BOMs. 
    2.  of these 5 BOMs, 3 have usage type SD, and 2 have usage type Production.
    3.  when you enter your BOM header material in the sales order, a selection screen will appear.  because of the priorities set in IMG, it will show you only the 3 alternate BOMs of the SD usage type.
    3.  the system will display the 2 other production BOMs only if there are no SD usage BOMs or if these have been deactivated, or if you change the order of priority in IMG. 
    4.  you cannot change the usage type in the BOM selection screen because this field is not available for input.  there are "next page" buttons, and i'm wondering if this is or is not just for long lists of alternate BOMs with a single usage type.
    my question:  is it possible to show all 5 BOMs regardless of usage in the same list, or in different pages?
    many thanks.
    Edited by: jonathan y on Apr 3, 2009 7:55 PM

  • Function Module to retrieve ALL Sales Orders in SAP based from a UserStatus

    Can someone know a function module to give me a set of Sales Documents
    of a specifc type and a specific System Status.
    For example:
    CALL FUNCTION '?????'
        EXPORTING
            txt04    =    'INAC'    "specfic status text not the 'E0001' JEST-STAT value.
            inact    =    ' '           "for ACTIVE statuses only.
            auart    =    'ZMAG'   "specifc document type
        TABLES
            t_vbeln    = i_vbeln   "result is a list of sales orders based from criteria above
    I am thinking it is not as simple as the above. But 2 - 3 FMs will do.
    Note: I am not given a choice to SELECT from DB tables VBAK and JEST. They want pure FM calls only. Please reply ASAP.

    Hi,
    i dont think there is any FM as such ..
    but in VA05,,, u will get the all the information
    reward points if it is useful...
    thanks,
    Manjunath MS

  • Sales Order Open Quantity

    Hello Folks,
    I am trying to calculate the open sales order quantity for a particular material and plant combination. Can you please provide me with the table and field where the open sales order quantity is stored. If it is a manual calculation, can anyone guide me through the process.
    I checked the forums but could not get an answer, so I am posting this question. Please answer.
    Regards,
    Pranava

    Tcode VA05 will show open sale order status where you need to include plant which wont be available with your existing standard configuration.   You can achieve this.
    In IMG path, go to Sales and Distribution > Sales > Lists > Define Selection Criteria.
    There add the following details..
    1. Program Name - SAPMV75A
    2. TRG (Transaction Group) - 0
    3. Display Group - K
    4. Event - SELK
    5. It - 8
    6. Field Name - WERKS
    Now go to VA05, click on Further sel.criteria and maintain the required plant there.  Also select Open sale orders button at the bottom and execute.
    System will generate a report as required by you.
    thanks
    G. Lakshmipathi

  • How to list incompleted sales order documents by plant or profit center

    Hi, Is it possible to to list incompleted sales order documents by plant or profit center? How?
    Thanks very much.

    Hi
    You can have list of open sales orders wrt to plant and probably it may be useful to you.
    This can be done with configuration so that you can add plant to the selection criteria in the T code VA05.
    Goto IMG - Sales & Distribution - Sales - Lists - Define Selection Criteria - Execute
    Click  New Entries and enter  the below fields  save the changes.
    Program Name - SAPMV75A
    TRG (Transaction Group) - 0
    Display Group - K
    Event - SELK
    It - 8
    Field Name - WERKS
    Goto VA05 and now you can see the field Plant in the Fur Sel Criteria.
    Regards,
    Phani Prasad
    Edited by: phani.prasad on Nov 8, 2011 9:36 AM

  • VA02 Sales order, shipping point

    Hi,
    I'm trying to save a sales order but there is in the Incompletion log that Shipping point has not been
    select.
    I tried to make a selection but I receive the message: "No possible entries exist for this field"
    I clicked on F1 in that field and then on the customizing button, system move to the customizing of the Shipping point and I can see the related customizing (there is a shipping point customizing) I try to save but system doesn't save the sales order
    Cannot understand why this
    Best Regards

    Hi,
    Please search this forum on how shipping point is determined for a particular sales order and see if your sales order meets the criteria for getting an automatic shipping point or allowed shipping point..if not, make the required configuration.
    Also, since you're saying its VA02--> some data might has been changed that doesn't allow a shipping point determination..so pls check the shipping point determination logic and analyze further.
    Regards,
    Raghu.

  • Is there any provision for viewing Sales Order at a plant level?

    Salute All !
    Is there any provision for viewing Sales Order at a plant level?
    Please provide TCode or any other way.
    Rgds
    Srivastav

    Hi
    Go to SPRO>Sales & Distribution>Sales>Lists>Define selection criteria.
    Select the Programme "SAPMV75A" , Trnsaction group=0 and pu display group=K and select the field =WERKS.
    Hope it will resolve.
    Regards
    Sanjay

  • Open Sale Order Value (FD33) not getting diminished even after closing SO?

    Hi,
    Upon Executing FD33 and clicking the status view for a Customer say XYZ , and then choosing EXTRAS-Open Sale Order . Say the value of open sale orders being shown is 75000. Even after closing the open sale orders (By Selecting VA05 and Putting reason for Rejection), and then also the Open Sales Order value is not getting diminished.
    What could be the reason ?
    Pls help.
    Regrds,
    Binayak

    Hi Binayak,
    As mentioned by you, running of Credit re-org program 'RVKRED77' is the only solution for this problem and it is known problem in SAP.
    Some precautions
    1. Always run the program in background by scheduling a job.
    2. The idle time is around midnight when no user is working on SAP.
    3. Some time the job fails as some other program may be updating same tables as this program. In such cases re-schedule the job at different time.
    4. You may run the program 'RVKRED88' which will simulate without actual updation of credit values.
    Hope this clarifies..
    Regards,
    Madhu.

  • Rajesh/Sadhu/RobertoUrgent :- Open Sale Order Value not getting Reduced?

    Hi,
       Upon Executing FD33 and clicking the status view for a Customer say XYZ , and then choosing EXTRAS-Open Sale Order . Say the value of open sale orders being shown is 75000. Even after closing the open sale orders (By Selecting VA05 and Putting reason for Rejection), and then also the Open Sales Order value is not getting diminished.
       What could be the reason ?
       Pls help.
    Regrds,
    Binayak
    Message was edited by:
            Binayak Ghosh
    Message was edited by:
            Binayak Ghosh

    Hi Binayak,
    As mentioned by you, running of Credit re-org program 'RVKRED77' is the only solution for this problem and it is known problem in SAP.
    Some precautions
    1. Always run the program in background by scheduling a job.
    2. The idle time is around midnight when no user is working on SAP.
    3. Some time the job fails as some other program may be updating same tables as this program. In such cases re-schedule the job at different time.
    4. You may run the program 'RVKRED88' which will simulate without actual updation of credit values.
    Hope this clarifies..
    Regards,
    Madhu.

  • Report for Material Numbers configured in KMAT Sales Order

    Hi,
    Scenario:
    We are operating with KMAT material type. (e.g. ABC)
    Material "ABC" has Characterstic Char 1 , Char2, Char3, Char 4
    Each Char has Char values.
    Sales Persons create the Sales orders by selecting approprite Char & Char Values. Via MRP, this lead to requirement generation for materials associated to the respective Char & Char Values.
    Requirement:
        For a given list of sales order numbers for the KMAT material (ABC),
            I want to get the list of Material numbers associated to the Char & Char   Values configured in these S.Os.
    Thanks
    Nitin

    For the Function Modules, you would need to go to Transaction SE37.  For  CS_BOM_EXPLOSION I use the following Paramater Values, aukmng = 1, auskz = X, capid = PP01, CUOBJ = from the VBAP Table and line Item of the Sales Document VBAP-cuobj, datuv = current date, emeng = 1, mktls = X, mtnrv = VBAP-matnr, stpst = 0, svwvo = X, werks = VBAP-werks, vbeln = VBAP-vbeln, vbpos = VBAK-posnr, vrsvo = X.
    For the Function Module VC_I_GET_CONFIGURATION use the following Parameter Value, instance = VBAP-cuobj.

Maybe you are looking for