MB466 sound card with the MB990 is not the same?

MB466 sound card with the MB990 is not the same?
MB466 Audio Equipment ID:0x10DECB79 Audio ID:63
MB990 Audio Equipment ID:0x10DECB79 Audio ID:77

You can enable ClearType system wide for all programs to make other programs like Firefox use it.
* http://support.microsoft.com/kb/306527 - HOW TO: Use ClearType to Enhance Screen Fonts in Windows XP
Control Panel > Display > Appearance > Effects: "Use the following method to smooth edges of screen fonts"

Similar Messages

  • I want to use the sound card with LabView

    Hi. Who can help me, I want to use the sound card with LabView, I have found the function but I can't use it. Thanks.

    Christi,
    In LabVIEW 6.1 I found some examples they use those sound VIs. They are located in \examples\sound folder. Those examples should give you a good overview how to use the VIs.
    Hope this helps
    Roland

  • I have an iPhone 5 and with any pair of earphones that I plug in the sounds comes out of the speakers and not the earphones

    I have an iPhone 5 and with any pair of earphones that I plug in the sounds comes out of the speakers and not the earphones
    The problem occurred a few days after I had updated to iOS 7.02

    Hey Tahls23!
    I have an article that can help you troubleshoot that issue:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    No sound through stereo headset
    Inspect the headset jack for debris and clean if necessary.
    Connect the headset and make sure the connector is pushed in all the way.
    Check the volume setting. Adjust the volume by pressing the volume up and down button on the left side of the iPhone.
    If you are trying to listen to music and cannot hear any audio, make sure that the music on iPhone is not paused. Try squeezing the headset microphone to resume playback. Additionally, from the Home screen you can choose iPod > Now Playing, then tap Play.
    Make sure the latest version of iTunes is installed on the computer that you are syncing the iPhone with (songs purchased from the iTunes Store using earlier versions of iTunes won't play).
    Try another Apple headset (some third-party headsets require an adapter to be used with original iPhone).
    Try a different song or video.
    Check to see if the iPhone alert sounds or other iPhone sound effects exhibit the same audio issues.
    Disconnect the headset from the iPhone and see if sound comes from the built-in speaker.
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • Desktop sound card with lapt

    Well.. its time for me to head to college.. so I just got a new laptop with much better specs than my was-amazing-last-year desktop.. And I have an X-fi Fatalty card with which i'm gettin very good latency results..
    Skippin most things, my questions are simple:
    ) Is there a way to use my desktop sound card with my laptop? Any sort of hardware modifications that I can use?
    2) If not, is there a way that I can stream the audio directly from my desktop to my laptop without much of a delay?
    Thanks.. Any help would be appreciated..

    This site (http://harness.gadgetscope.com/view/XFIH-002) sells a cable for this purpose that will work with any SB card with the ten pin white connector on it. Bit expensi've but should do the trick.

  • IDVD copies the movie but not the sound

    Hi,
    With IDVD one-step-dvd I try to copy edited movies from a Sony Handycam directly to DVD. Unfortenatly it copies only the images but not the sound. Anybody has the same experience and knows the solution? When I import the movie into IMovie the sound is allright.

    Quicktime, Quicktime Pro and iTunes don't convert "muxed" ( muxed means multiplexed where the audio and video are stored on the same track) video files properly. It only plays the video and not the audio.
    See:iPod plays video but not audio.
    You need a 3rd party converter to convert the file with both audio and video.
    See this for help: Guide to converting video for iPod (Mac/Windows).
    Converting video for the iPod using Videora.

  • Want to use credit card with firefox but do not see a lock with firefox 5 on linux using priceline

    want to use credit card with firefox but do not see a lock with firefox 5 on linux using priceline

    Type '''about:preferences#applications'''<enter> in the address bar.
    Now follow the picture.

  • Need a sound card with time delays

    So.. I am looking for a sound card that is 7. channel (5. is still ok tough I perfer 7.) and that offers me Time aligment/time delays for EACH chanel.
    Does any of the Creative sound cards offer this?
    I browsed the creative page..but could not find any info...does maybe any other sound card offer that?
    ty.
    regards
    sergej

    I need one 2,
    I?ve bought a LCD tv a few day back and now i?m started building a media center pc.
    Now my dvd recoder allows me to adust the sound so it matches the screen?s lag.
    Is there a soundblaster card that gives you the ability to adust a delay in the sound?
    thanksMessage Edited by Pim on 0-29-200607:33 AM
    Message Edited by Pim on 0-29-200607:34 AM

  • HT1349 why some iphone 4s has korean letters at the back and not the same with the most iphones..but the serial and software are all the same..so why there is phone with korean letters on the back it says.. kcc -cmm- apa -a1387

    why some iphone 4s has korean letters at the back and not the same with the most iphones..but the serial and software are all the same..so why there is phone with korean letters on the back it says.. kcc -cmm- apa -a1387..i purchased one and really worried about this..is this original or not..but all the software etc are all the same with other iphone..just that korean letter at the back

    I bought it in some mall here in our place..im from philippines.. im worried about this coz its different with other iphone at the back.. it says designed by apple in california..then its all korean letters at the bottom it says KCC-CMM-APA-A1387..i checked both serial number from the phone in the box and in the sim card slot and its all match, i checked it also in apple service and support coverage and it says : valid purchase, your product is eligible...and it shows i have 90 days technical support,and my repair and service coverage is active....pls help what model of iphone is this its working and i can sync to itunes,icloud and etc..thats what it says on the back on the image ia

  • What sound card with DTT3500

    what sound card with DTT3500h Hello ,
    acatually? my sound card is a sb Li've! 024 player connected to Cambridge Sound Worhs DTT3500 by spdif cable.
    I'm on windows XP , and by the and of the year I'll be on windows 7.
    Windows? 7 doesn't support my old good sound card <img alt="[/img] src="http://forums.creative.com/i/smilies/6x6_smiley-sad.gif" title="Smiley Sad">
    I know that the X-FI card dosn't work with the spdif of the DTT3500 , which leaves me no choice but the audigy card I think.
    So the question is : what type of Audigy work well with de DTT 3500 ?
    Sorry for my bad english.
    Message Edited by angelo_tth on 08-09-2009 05:58 AMMessage Edited by angelo_tth on 08-2-2009 07:02 [email protected]

    Yes, DDL works with EAX. That's probably you're best solution. You could either get a Titanium or Prelude, which both come with DDL.
    Alternati'vely OEM Xtreme Music and Xtreme Gamer (SB077x series) cards often have optical ports. You could get one of these and add the DDL Pack from Creative (about $5 American). That can work out cheaper than a Titanium or Prelude.
    Creative sell a flexijack adaptor giving optical out ports. That will work with most X-Fi models.
    If you play a lot of games I would skip the Audigy series and the X-fi Xtreme Audio.

  • How can I print just a part of the page and not the full page with Adobe Reader v 10.1.2?

    how can I print just a part of the page and not the full page with Adobe Reader v 10.1.2? I need to print a engineering print with lot of information but information is too small in letter size and I don't have a plotter.

    Two ways to print a portion of a page: zooming or using the Snapshot Tool.
    ZOOMING:
    Zoom into the area you want to print.
    Click the Print icon.
    Under "Pages to Print", make sure "Current view" is selected under "More options" (you may need to click "More options" to open it).
    If you aren't satisfied with the preview, try clicking "Fit" under the Size button.
    SNAPSHOT
    Choose Edit > Take A Snapshot.
    Drag a rectangle around the area you want to print. 
    Click the Print icon.
    Under "Pages to Print", make sure that "Selected Graphic" is selected under "More options".
    To enlarge the snapshot to fit the sheet of paper, choose "Fit" under the Size button.
    Hope this helps!

  • How can I transfer photos from an IPhone 5 to an IPad 2 using a cable.  I have tried using the lightning to firewire adapter with my current lead but this only seems to allow a download from the Ipad to the Iphone and not the other way around.

    How can I transfer photos from an IPhone 5 to an IPad 2 using a cable.  I have tried using the lightning to firewire adapter with my current lead but this only seems to allow a download from the IPad to the IPhone and not the other way around.

    The devices are not designed for transfer of that kind.  Use Photo Stream as suggested by another poster, or transfer photos to your computer (a good idea anyway since they will be lost if your device needs to be reset), then use iTunes to sync them to the other devices.

  • How to download versions of apps compatible with OSX 10.7 not the ones updated for 10.9

    how to download versions of apps compatible with OSX 10.7 not the ones updated for 10.9?
    I'm trying to download iLife and iWork apps for my MacBook. For example: The GarageBand app will not download because it says it is compatible with 10.9. I have 10.7 and cannot update to 10.9 because I'm on a 13in. Late 2007 MacBook. Any suggestions?

    Click here and follow the instructions. If they’re not applicable, you can’t download them and need to install them from a DVD.
    (108988)

  • How can I import pictures from my iphone to PC which I imported to the iphone from another PC? The folder doesn't show on my computer. I see all other pictures I took with the phone but not the imported folder.

    How can I import pictures from my iphone to PC which I imported to the iphone from another PC? The folder doesn't show on my computer. I see all other pictures I took with the phone but not the imported folder.

    Photos that were synced from a computer won't show for copying to a computer. If you want to copy them back then you will need a third-party app on your phone such as Simple Transfer which can copy them off via your wifi network. But photos are 'optimised' when they are synced to a device, any that you then copy back to a computer may not be exactly the same as they originally were on your computer (e.g. their dimensions might be different and their colours may look a bit different).

  • On imac 10.6.8 using current version of Aperture.  How can I access the Aperture Library  on my external hard drive that I use with time machine for backup?  I can only access the application but not the library..

    On imac 10.6.8 using current version of Aperture.  How can I access the Aperture Library  on my external hard drive that I use with time machine for backup?  I can only access the application but not the library..

    Go into Time Machine (the program not the bundle on the extrnal disk) and using Time Machine's browser go to the Folder where the library lives. You could look in the library bundle in Time Machine but that won't really tell you much,
    If you want to make sure it truely has backed up your library you will need to restore it and open the restored library with Aperture.
    If all this still has you confused you need to read up on Time Machine in order to get a feel for how it works, for what it is doing and for how to restore files from it.

  • How do I determine if the memory problems are with my imac and not the RAM?

    I've heard of some vague problems with intel imacs and their memory slots. I'm about to replace (for the 3rd time) RAM, and think I need to test further to see if the problem is with my imac and not the RAM. Right now I put back in the original 2-512 sticks that came with the imac, and the rember test is only showing 594mb (odd amt!) testing OK. But, in "about my mac" it will show as 1gb.
    Problems I've had with each set of RAM: occasional KP's, excessive spinning beachballs, sudden closing of apps (esp. if I have several apps running), won't fax usually (will hear a fax tone instead of a dial tone at the onset), disappearing documents section under my username.
    I bought this imac refurbed thru the apple store last fall: 2.16 C2D 20" imac
    Any ideas before I have to separate myself from my imac to send it in??

    Hi Toodles
    The pin strips on the new modules maybe a little thicker than your original modules, and it's going to take more force to seat them properly. If the new Memory Specifications are correct I would try them again. Slide them in untill they stop, then push real hard untill you feel them seat into place.
    I've never seen a report about an odd amount of ram shown. If reinstalling the ram modules does not solve your issue, and may be a indication that there is something wrong with one of the slots.
    Dennis
    17" iMac Intel Core Duo - 2GB Ram -   Mac OS X (10.4.10)   - Maxtor 300GB FireWire - Creative Inspire 2.1 - 2G Nano

Maybe you are looking for

  • Archiving object CRM_SEOPD in solution manager

    Hello, The self diagnostics for solution manager throws a warning under "Service Desk" functionality with message text "Critical number of incidents per support team or error reading volume". The detail display shows: Strategy for resolving the alert

  • Unzip GZ files using Powershell

    I have  Windows 2008 Server with some GZ type files in a folder. I would like to script unzipping them using Powershell, can someone tell me if this is possible and how I would do it? The folder is d:\data_files\ and I'd like to uncompress all the .g

  • Data conversion is necessary at field level

    Hi everybody. Im a BW consultant in a BCS project, and I had to make a change in a objetct that is used in BCS as a custom attribute. What I made, is to remove the ALPHA routine in the object. Later, the BCS consultant generetad the data basis again,

  • Query -suggest me

    Hi Experts         I am using the following query, my input as 'ZSO' only, but now the query is not working properly. what could be the reason. pls help me on this. SELECT a~aufnr        a~plnbez        a~dispo        b~kdauf        b~kdpos        c~

  • How to control tcp connection with java tcp socket programing ??

    Hi, I am connecting a server as using java socket programming. When server close the connection (socket object) as using close() method , I can not detect this and My program continue sending data as if there is a connection with server. How to catch