Mb51 -FT & M --Different Unit of measuret
Hi
For the material a85.52.02.1121, when I see material document list(MB51),material movement showing different UOM( M & FT).
For material movement 261 it is showing 2- (qty) FT
movement 262 it is showing 2(qty) FT,
But for movement type 561 it is showing 2 (qty) M.
But we maintained in the material master,UOM & alternative unit of measure as 'M' only.
my question is
From where this FT unit of measurement is coming?
Any tips to solve this problem?
With Regards,
Jaheer(abaper + MM consultant)
Check the unit of issue in plant data storage view
and also check info record for vendor and material
for 261 system takes the unit of issue maintained in plant data storage and not base uni
Madhura
Similar Messages
-
Hi
For the material a85.52.02.1121, when I see material document list(MB51),material movement showing different UOM( M & FT).
For material movement 261 it is showing 2- (qty) FT
movement 262 it is showing 2(qty) FT,
But for movement type 561 it is showing 2 (qty) M.
But we maintained in the material master,UOM & alternative unit of measure as 'M' only.
my question is
From where this FT unit of measurement is coming?
Any tips to solve this problem?
With Regards,
Jaheer(abaper + MM consultant)Hi,
Check the Unit of issue at plant data storage location 1 of the MMR, I suppose its with FT,
Other wise too as both M and FT are standard UOM's,with a standard conversion, you can enter a different unit of measurement apart from the base unit maintained in the MMR during the transaction (261/262), which will get automatically updated in the inventory.
Trust this clears your query
Regards
Merwyn -
Different Unit of weight, Delivery KG and LB
Hi all,
we're working with a material master record within several countries. Managed and also used in Europe. So MARA-GEWEI is posted with KG, therefore the sales order and at the end the delivery refers to this weight unit.
Our US friends using a scale with weight unit LB and during packing they should update the HU weight using "VL02n". The scale couldn't be integrated (no it-interface), therefore the data will be entered manually and we expect a lot of missentered data.
Any idea how to change the weight unit in the sales order / delivery? Do we have to use an user exit during order creation implementing "UNIT_CONVERSION_SIMPLE" or is there any other solution?
The T006 is maintained with LB / KG, the User Own data were also checked ... forgotten anything?
Thanks and best regards,
DirkThanks you for the quick answer.
However the alternative unit of measure is not our aim, we're looking for a different unit of weight.
The articles were ordered with unit of measure PC and we want to determine the right weight for the parcel, once with a scale in KG and once in LB (as it is regular unit of weight in US).
Regards,
Dirk -
IS-Retail:how to maintain different unit of measures for a article
hi experts,
can anyone tell me how we maintain different unit of measures for sales and purchasing for a article.base unit of measure,order unit,var unit.Hope for a good answer.
RegardsHi,
Go to MM42, select basic data view
In,Units of measure/ EANs /dimensions sub tab
there u can see four radio buttons
B.Un Unit of measure is base unit (used internally only)
O.Un Unit of measure is the order unit - Purchasing
D/L.Un Unit of measure is delivery unit/issue unit - Logistics
S.Un Unit of measure is the sales unit - Sales
for eg:
First line enter EA (each) or PC (piece) in Auom for a material and enter 1 in Number and select radio button for B.Un
Second line enter CT (carton) in Auom and enter 10 in Number and select radio button for O.UN (when you creating a PO it UOB automatically picks as CT)
Third line enter PALin Auom and enter 50 in Number and select radio button for D/l .UN (when u creating a delivery UOB picks as PAL ie pallets)
Fourth line enter EA or PC and enter 1 in Number and select radio button for S.UN (when u creating a Sales order UOB picks as EA or PC as u defined)
Mohan -
Different units in total sum row
Hello Bex Experts,
I have orders with different Units in a report. currently the total sum row show * for Mix
How can I get the total sum for ST and KG like
Total Sum 366 KG
Total Sum 342 ST
BR MatthiasHi Matthias,
If you want to sum their numbers regardless of the UNITS, just use the NODIM() in formula..But if you need to add them and have 1 unit for the result, you must convert one of the them to another unit..
Regards,
Loed -
Hi All,
We have a cube in which we store delivery quantities in sales units. We have another ODS in which we store the delivery quantities in different units, say Litres, KGs, Pounds etc.
Ex:
Cube:
DelNo quantity Unit
1001 100 L
1002 150 KG
ODS:
PODNo Item Quantity Unit
1001 10 100 L
1001 10 160 KG
1001 10 200 UG6
1002 10 110 L
1002 10 150 KG
1002 10 190 UG6
The User wants a flexibility to look at the quantities in different units i.e they want a variable on selection screen in which they input the required Unit, say KG, then all the quantities in the report should show in KGs.
In the above given example for Del No 1001, cube stores the quantities in 'L' but it has to be displayed in KGs by taking the KGs value from the ODS.
Is it possible to do this?
Both DelNo in cube and PODNo in ODS store the Delivery Number but both have different technical names.
Rgds,
Nene.Hi nene,
To do Quantity conversions at report levels,
please follow these steps.
1)Maintain settings at infoobject level(under BEX settings tab),
whenever u made this setting and activate the infoobject one DSO name with "Generated Data Store Object " will be generated.
2)Run the DTP where the default DSO was generated
3)goto Tcode RSUOM,goto tab "Conversion factors",give reference object(as which object u need unit conversion)
4)Under UOM tab select the option of source quantity and target quantity unit
5)Goto BEX,under the properties of keyfigure >conversion>unitconversion have to be taken,variable comes here as conversiontype u have given at RSUOM tcoce.
Hope this helps you
Thanks,
Praveena. -
How to handle different Unit of measures in ALV reports? Quantity/Price
Anyone knows how to handle different unit of measures for quantity or price in hierarchy ALV reports?
hi,
use the below fields:
Link to measurement unit
qfieldname (measurement unit field name)
only relevant for quantity columns with unit link.
Name of the internal output table field containing the measurement unit associated with the quantity field FIELDCAT-FIELDNAME.
The field in FIELDCAT-QFIELDNAME must have its own field catalog entry.
qtabname (internal measurement unit field output table)
value set: SPACE, output table field name
Name of the internal output table containing the FIELDCAT-QFIELDNAME field.
regards,
madhumitha -
Multiple Modbus Servers with Different Unit ID running in cRIO 9074. Possible ?
Hello
I want to create an application such that i can create two Modbus I/O slave server (TCP/IP) with different unit ID and can communicate with the slave through Clients. I created this application but only unit ID 1 is working. Is it like this that at a time two modbus slaves cannot work together ? Also I tried with one server and giving different Unit ID but then also it's not working. I found one thread, here is the link.
http://208.74.204.114/t5/LabVIEW/how-do-i-get-multiple-tcp-ip-modbus-to-work-together/td-p/2239130
Are there any updates on this issue.
Labview 2012 sp1
cRIO 9074I don't fully understand your issue (but I'm trying).
Traditionally Modbus TCP/IP slaves cannot talk to each other, also the UnitID is mostly moot for MODbus/TCP since ports and IP addresses exist (unless you are building custom applications that will handle UnitID internally, because you have can't have 2 servers running on the same port).
If you can clarify your first sentence that would help a lot.
Varun_ECK wrote:
Hello
I want to create an application such that i can create two Modbus I/O slave server (TCP/IP) with different unit ID and can communicate with the slave through Clients.
You want to create 2 MODbus/TCP slave servers, that can talk to other slaves? Or do you want the Master to automatically do things based on the slaves response? Are the TCP slaves on different computers, IP, etc? -
Unit Conversion from Different units to TO ( Ton )
Hi all,
I am getting the Quantity with different unit of Measures from R/3 Datasource.
So my requirment is I have to convert all Units to TO ( TON ).
I have searched in the forum and find one function module i.e UNIT_CONVERSION_SIMPLE.
But when I am passing Input = 1000
UNIT_IN = KG
UNIT_OUT = TO
It is giving an Exception that "Input value is not Number" but 1000 is number only na.
So please suggest me any other way to Convert different units to Single uint in BW3.5.
Please suggest me.
Thanks,
Kiran ManyamHi Kiran,
Check
http://help.sap.com/search/highlightContent.jsp
Regards,
Rajdeep. -
Maintain different unit of measure at operation level
HI
I am working on a scenario where I have to maintain product in different units after each operation for a material. like i am working on SFG to get FG in 3 steps. my base unit of measure is lb. I maintain my product after 1st operation in lb, after 2nd operation in PC, and after 3rd operation again in PC. but weight of Piece after II & III operation are not same. how can i maintain relation between PC & lb at operation level. is it possible?
regards
RajeshHi,
1. Routing can be created for one header unit of measure only
2. But in the routing we can have different "Operation Unit"
3. In the routing in the operation details there is a unit of measure conversion details
1 header unit = 1 operation unit
4. In your case you need to maintain this which can solve your problem.
Kindly let me know if this is useful or if it doesnt work we can find alternate solution for the same.
thanks -
Different unit Measures Total in over all Result
Dear All,
The quantity is in different unit of measures like
Presently getting:
10PC
10KG
10PC
20KG
10ton
Total *
when add all those things the over result shows the *
when i go with CKF NODIM option i could not found againest which order kgs are there and for which order pcs are there.
So there is any option getting the overall result total of different unit of measures .
I want as below
10PC
10KG
10PC
20KG
10ton
Over all Result :
20pc
30kg
10ton
like that I need any possibility , Unit converion doing at transforamation level based on the conversion factors
but the base unit of measure and Alternate unit of measures are different orders are having different units , so it should be added.
Please can anybody provide the some information.
Thanks & Regards,
SathishHi,
Thanks for your kind responce,
which you said is ok to some extent , but the report looks not good
as per your idea the report output is below
order unit1 unit2 unit3 value qty
1 x kg x 10000 20
2 to x x 5000 10
it looks like that , it is not good again the customer want total of the all units so the above one will not give
in which way i mentioned in same either it is possible or not
Once again thanks for kind responce and Idea
Thanks & Regards
sathish -
Different unit of measurements work independently
Hi SAP MM Experts
Is there any possibility to work with 2 different unit of measurement at a time in sap which need to be independent from each others mean no relation b/w 2 uom.
My client is a steel manufacturer. When a bar (steel rod) received from vendor, they want to enter in system with uom as KG and bundle and same thing will be control in all possible good movement. even in sell, they want to control with 2 unit on measurement. pls guide me. thanksYou can maintain two uom for material, You can purchase this material with two uom. But material can only stored in warehouse with base unit of measure. You can also sale the material with two unit.
For using different uom in purchasing have a look into the docu Create Info Record for different Order Unit -
Maintenance Order Confirmation in Different units
Dear all,
my client needs to have order confirmation in different units. That is they need to enter how much work is finished in km, piece or m3 .
Can i do that with iw41? i know thats time confirmation but from any similar screen?
Thanks
JMqJohn,
The system is hard-coded to accept UoM of TIME only
However, it is possible to confirm Km etc with a little manipulation of the system.
What you need to do is:
- Create a new UoM in the IMG. This UoM need to be time-based, but call it somthing like Kmt (travel kilometers)
- Create a new activity type for your Kmt
- Create a new cost via TCode KP26 for your cost centre and activity type
- Repeat steps above for other UoM
- Test in an order
PeteA -
Stock maintaining in different Units
Hi All
Stock maintaining in different Units.
When i do PO & GRPO the item which i purchase is in Kgs (say 100kgs).
In production i issue the same item in Liters.
But in this case i done one process in Item master Data(IMD)->Purchase Data Tab-> Item per purchase Unit i given the conversion factor. At this case this value will directly convert to Liters.
Eg. PO&GRPO is done an item for 100kgs then in stock is show as 95Liter(i.e, item per purchase unit is multiplied).
My Issue is:
After Production is done some how the stock is change say 46Liter is remain. Then i need to identify in Kgs.
For this case i done small process is this possible to do please help me
I created one UDF in Item Master Data-> Stock Tab by doing Format Search i Connect the save Query. But this not showing the Correct value.And this has to auto update when the sock is added.
Please Help me in this. If their is any Query and any other procedure please suggest me how to follow the steps to solve this problem.
Thanks
Santhosh.KOk then,
Select $[$28.7.NUMBER] * (SELECT T0.NumInBuy FROM OITM T0 where T0.ItemCode=$[OITM.ItemCode])
1. Save the Query in Query Manager.
2.Open Item Master
3. Select a Item
4. Go to Inventory tab
5. select your UDF
6. Press ShiftAltF2
5. Assign the Query
6. Don,t give auto refresh
7. Add the FMS window.
8. Press Shift+F2 or go to Tools>Search function>search
9. Now it will show the converstion factor.
10. This is based on Item, u should press Shift+F2 in all warehouse
11. Update the master.
regards,
Thanga Raj.K -
Different Unit of measure in vbn1
Hi experts,
Scenario- this is a manufacturing company, customers are retailors here.
company has an offer for customers/retailors
buy one carton of mineral water get 2 bottles free. (one carton= 12 bottles of mineral water )
I have maintaind two units in MM01,by giving Base unit and Alternative Unit in additional data.
Ques- In Tcode VBN1(free goods)- we cant maintain two different units.
CLient wants when we make sales order for one carton it should come like this :-
material -1 carton TAN
material -2 bottles TANN (free goods)
Is it possible to do like this?
please guide me
Regards-JAYNote 880211 - Alternative Unit is ignored while transferring PDS
Maybe you are looking for
-
Just recently I was able to print from all of my devices now the only one that prints wirelessly is the iMac the iphones & ipads say no air printer is found how can that be if the iMac is air printing?
-
How to install Adobe CS5.5 on a Macbook Air
I bought Adobe Creative Suite 5.5 Design Premium back in 2011 and have been using it without any problems. I recently bought a Macbook Air that I would like to switch to. Without the CD drive, how would can I reinstall CS5.5? I can't download the tri
-
i have the new version of i tunes and it says it cannot ascess my ipad4 and asks to upgrade and reset how to solve this????
-
Flash CS3 swf viewing @ hyper-speed on IE
Hello- I have created a slide show from the Flash CS3 template... inserted in a DW CS3 document. Views/Tests GREAT except from IE... I'm thinking there must be a special "IE" code... but cannot find documentation. What's also interesting, I also crea
-
Inspection lot problem during inbound delivery
Hi, I am facing following issue during inbound delivery. I have activated inspection type 01 in material master for a packing material. Created a PO for the material through ME21N. PO created. Now I am creating inbound delivery through VL31N with ref