MB51-text not display

Hi MM Expert
While doing stock posting or MIGO I enter the text in text tab but when i go to transaction MB51 the text column is blank it does not Show anything.
Is any sap not to be apllied ?
Thanks
Sanjay

Hi Sanjay,
I think you have entered the Item text while doing MIGO , and like to check the same in MB51 transaction all the details related to MIGO document.
In MB51 SAP has not provided the Item text field to display,so you cann't get the text entered in MIGO in this report.If required take a help of ABAPer to include this and go for ABAP report development
But if you need the text the same can be entered in the Header text at the top of MIGO this you can display in MB51 transaction.
Hope you understand
rgds
Chidanand

Similar Messages

MB51 text not displayed

Hi all
While doing MIGO I enter the text in text tab but when i go to transaction MB51 the text column is blank it does not Show anything. This happened when we updated our version to ECC 6.0
Thanks in advance
Yam

Hello,
For material document items without a material number, the system displays the short text from the purchase order item. The prerequisite is that the purchase order still exists in the system.
The display of archived material documents via report RM07MAAU should, if possible, be replaced by the use of material document list MB51 that allows better selections and output options when using archive index MARI
Regards
Mahesh Naik.

Flash Text not displaying certain fonts

Thanks as always…
I am trying to use Flash text for some headings, but after an
hour of pulling my hair out I've just realised it will only display
certain fonts, such as Helvetica etc.
I added the font I want to use to my font list but it still
does not display…
I'm using MX on OSX 10.3.9.
Any ideas? Thansk.
Flash Text not displaying certain fonts

Fodderstompf wrote:
> Thanks guys,
>
> I don't have Flash MX and it turns out the font is a
Postscript Type 1.
>
> Didn't realise about the true-type thing, bit of
nusiance (and completely the
> opposite of the hassle I normally have with print
work!).
>
> I'm gonna look and see I can get a true-type version of
the font (Tabitha), or
> is there any other work around?
>
> Thanks.
>
>
Is your text in a dynamic text box, or static text box in
flash?
I don't think the issue concerns the "true-type" or not
"true-type" font.
In Flash, when text is part of a dynamic text box (which I
assume is the case in your situation),
then the font works just like in an html page:
if the font is installed on the computer it will show, if
not, it won't. The way around this, is to
embed the font data in the authoring flash file, and link it
to the dynamic text box, via actionScript.
So if you cannot work on the authoring Flash file with Flash
MX or Flash8, and if indeed we're
talking about a dynamic text box, your only option is to use
a web-safe font.
seb ( [email protected])
http://webtrans1.com | high-end web
design
An Ingenious WebSite Builder:
http://sitelander.com

Why won't voice generated text not display as I speak?

Why won't voice generated text not display on the screen as I speak?

All you get in 10.6.5 is spoken COMMAND recognition.
Dictation requires 10.8 Mountain Lion or later:
Mac Basics: Dictation lets you speak text instead of typing

Text not displayed in the Web Report

Hi All,
I have a query where user is expecting both Key and Text to displayed in the report for the Info object "Local Product High". This infoobject has text data available. But Iam not sure why this is not getting displayed even when I select both Key and Text in the properties screen.Only Key is getting displayed.
Can some one throw some light on this.
Regards,
Srinivas

I juct checked the Text table and I see the texts for the infoobject exists. I do not think CHange run will resolve this issue. but yes the master data is active .
I will now try to run the report through Bex and come back.
Thanks for the input..
regards,
Srinivas

PO Material text not displayed in PO

Hi All,
Please help me in finding a solution for my issue,
We use SAP ERP 6.0, and recently upgraded from SRM 4.0 to SRM 7.0. whenever a PO is processed in SRM and replicated to SAP, "Item text" inputs entered in SRM is replicated to "Material PO Text" in SAP and when the PO is printed, those inputs are not displayed in the PO..
However if I amend the same PO again in SRM (by just modifying the inputs in "Item text") and re-replicate to SAP and reprint the PO, the inputs are displayed in PO this time. becoz of this, we had to amend every PO again to have the Item text displayed in PO.
Why the inputs are not displayed in PO at the first time and what made the system to display it after i amend the PO the second time???
Any help is much appreciated.
Thanks
Vinoth

Nabheet, Thanks for your response.
I have already raised this with the tech team and they said they antcipate this to be fixed by this March. I have no idea if this takes so long to fix it. Since we had to process 100s of POs every day, it is affecting our SLA badly
Vinoth

Arabic text not displaying correctly in Win Server 2008 R2

Hi,
We have an .mdb database stored on our Windows Server 2008 R2 server but when we view the contents some of the text has strange characters.
When we view the same db in Windows Server 2003 we do not have these characters. I'm not sure what exactly we need to do to correct this issue..
Any suggestions welcome..

Hi,
Thanks for your post.
When you open a Web page or a text file that contains a string of Arabic characters, the string is not displayed correctly. This issue occurs when the following conditions are true:
The Left-to-Right Override (LRO) Unicode control character is used in the string of Arabic characters.
You specify a font that is not Simplified Arabic Fixed.
Please apply the hotfix below:
Incorrectly displayed Arabic characters in Windows 7 or in Windows Server 2008 R2
https://support2.microsoft.com/kb/976525?wa=wsignin1.0
And check the result.
Regards.
Vivian Wang

Info Record Text and Material Text not displayed in Subcon. PO printout

Hi,
I have this scenario, where the Info record text from Info Record PO text does not appear in Print out but appears in Print preview.
Also the Info record text for standard Purchase order is displayed in Print preview and Print output.
The config settings for texts for Purchase order is the same for Purchase order with no Item Category (Standard) and Subcontracting (item category L).
Also the texts in Purchase order automatically copies in Standard purchase order (adopt button not present) but not in Subcontract purchase order (Adopt text is present).
I have checked the config for copying rule, for Info record text is automatically adopt.
I am unable to identify the missing config for this.
Also the same problem exists for Material text from Material Master PO text is not displayed in Fax output but appears in Print output.
Please let me have your inptus,
Regards, Muthuvel

The solution to this is SPRO->SAP Reference IMG->Materials Management->Purchasing->Messages
->Text for Messages->Define Text for Purchase Order.
Select Texts for Document Item folder - There will be a list by Document Type and Item Category. Make sure there are entries for your combination, otherwise they will not be part of the output message.

Text not displaying on components

I have one swf file where im using the default textInput and
button components. Just so the user can enter a zip code and click
submit. When i publish that swf, everything looks fine. The problem
is that i am loading that swf into a master swf and when i view it
through the master swf, it displays the components without text.
The submit button is blank, it should say 'submit' on it, and no
characters display when you type into the textInput component. I am
able to type characters and submit the form, but i can't see what
im typing. I've tried messing with embedding fonts in the child swf
as well as the master to no avail. If anyone has any suggestions,
they would be greatly appreciated.

Here's how to talk to your dynamic text box. Where you put
this bit depends
on how you are building the preloader, but since you say the
progress bar
works fine, I'll assume you know what you're doing there and
will be able to
get this in the right spot.
// variable that calculates a number for the percent loaded
preloaded = Math.floor((loadedBytes/totalBytes)*100);
// this line is talking to a dynamic text box named
"percentage_txt" that is
inside a movieClip named "preloader_mc" on the root timeline
// depending on your setup the path may be different, but
make sure
everything on the way to the text box is named
_root.preloader_mc.percentage_txt.text = preloaded + "%";
// You've probably left out the ".text = " bit. Just a guess,
but that's
the bit I always find
// I've left out when I'm having trouble with dynamic text.
// Also make sure your text color is not set to the same
color as your
background. Duh.
Good luck.
--KB
"patbegg" <[email protected]> wrote in
message
news:ejuu12$bmd$[email protected]..
> Hi,
> Cheeky little problem. I cannot get the dynamix text to
show on the
> preloader
> of a loaded movie. I am calling in a .swf which has a
preloader in it, the
> progress bar is fine but the text showing the percent
will not display.
>
> I have tried the _lockroot method, but no joy. Any ideas
anyone?
>
> Any help appreciated guys.
>
> Cheers,
> Pat
>

TextArea text not displayed correctly with ImageSnapshot

I am having an issue with the ImageSnapshot.captureImage command capturing the text in a TextArea. Attached are two files illustrating the issue. The "screenshot.jpg" pic shows how the TextArea controls are displayed on the screen. The "created jpg.jpg" pic shows how the text is displayed in the jpg that is created. Below is the code that creates the snapshot, everything is pretty standard there as far as I can tell. The text is obviously not sized the same from one to the other. Any ideas whats going on here or what I can do to correct it?
var myencoder:JPEGEncoder = new JPEGEncoder(50);
var imgss:ImageSnapshot = ImageSnapshot.captureImage(viewstack.selectedChild, 100, myencoder);
var fs:FileStream = new FileStream();
var ssfile:File = File.applicationStorageDirectory.resolvePath("ProjectImages/snapshot.jpg");
fs.open(ssfile, FileMode.WRITE);
fs.writeBytes(imgss.data, 0, imgss.data.length);
fs.close();
Thanks,
Scott

Scott,
Can you file a bug? http://bugs.adobe.com/flex
Thanks,
Jason

OTR text not displayed correctly

Hi,
I have view in which there are 3 tables with 3 colums each.
All the data binding etc is fine and it is displayed correctly in the portal.
My issue is with the OTR texts maintained. The text for column headings in the table is binded with the OTR texts (created through transaction sotr_edit) $OTR:<package>/<alias> in properties value field.
We have an option to change the language in the portal. So when a language is selected, the texts for these column heading is displayed in the corresponding language selected.
But for some langauges selected, the texts show some random language instead of the one selected.
Any idea on how this can be corrected.

Thanks for the reply Thomas.
And sorry for delayed reply.
I could see that the binding of the OTR was not correctly done with the texts.
After i made the changes, the languages were displayed correctly.
My concern here is that i have made the changes as this is a custom development and the issue was solved.
But this same issue is seen in a standard component where the text was not displayed in the language selected and this issue is coming only for the users assigned to a particular role. And for all others, the texts are displayed with the language selected.
Any inputs on this would be helpful.
Thanks.

Public Holiday text not displaying in PT03 (Special Days)

Hi Experts,
For my client, I have to configure a public holiday and restrict it to only few WSRs. This public holiday is not part of any public holiday calendar. I have configured this holiday as a special day by defining the day type selection rule & special day.
When I checked the work schedule in PT03, it is not displaying the holiday class and the text of the public holiday. It is only displaying the day type for this day.
Please help.
Many Thanks for your help in advance.
Warm Rgds,
Arun.M

            qPane = new JScrollPane(qTextArea);
            qPane.add(qTextArea);
            performedOpsPane = new JScrollPane(performedOpsTextArea);
            performedOpsPane.add(performedOpsTextArea);
            logPane = new JScrollPane();
            logPane.add(logTextArea); When you create a scrolled component, you either pass the component to the JScrollPane constructor or add it afterward, not both. If you're going to add it afterward, you use the setViewportView() method, not add().

Full Text not Displaying in table

Hi Experts
I am displaying Long text in Text elements in table But It is not displaying full Text only Half of text is displaying.
How to overcome this? Is there any length limitation for text elements in table.
and Variable type is STRING
i am concatenating lines from Read text FM.
Regards
Jagadish
Edited by: acj_vy on Aug 17, 2010 10:23 AM

Hi,
You should not concatenate the text into string which you read using READ_TEXT.
You should loop at the table and then display the text using work area of the table.
It will be displayed line by line as it is getting displayed in your standard transaction.
Thanks,
Archana

Subtitles & other text not displaying properly safari & firefox

Hello
some text in Safari and Firefox is seriously degraded. I changed to Firefox because Safari was displaying wrongly, but Firefox has the same problem. See image:
I cannot use subtitles on BBC streamed movies either, and the timing of the movies on the bottom ribbon do not display either
I am using Lion 10.7.5
Is there a solution for this problem?

The tags at the bottom of my original message are out of date:
Should be
Mac OS Lion 10.7.5
Safari 6.0 (7536.25)
Firefox 16.0.2

PO item text not displaying in ME23n

Hello,
There is a PO which was created manually in which the Item text does not display from ME23n. In the display, the item text has a tick next to it but the display window shows nothing. However, the output message is having the item text in it.
Has any one encountered a problem like this?
Some additional points in this regard:
- PO created with refernce to a PR
- The item text was manually entered in the PR and it is displaying correctly there.
- The PR and PO could have been created with a different log-in language
Appreciate a response.
Thanks
Nazeer

Hi Antony,
Thanks for your reply, but what you say is not correct.
Item text, or for that matter any text, is not language dependent. I have tested this out by creating a PR in DE and the PO in EN. The text in both (PR or PO) displays correctly when you log in with either DE or EN.
Thanks
Nazeer

MB51-text not display

Similar Messages

Maybe you are looking for