MB5B - Stock on posting date show in other Unit of measure

Dearl All,
Pls support me this case: I would like to see this report (MB5B - Stock on posting date) in other Unit of measure.
This report shows stock in Basic Unit only.
E.g
Material A, base unit = M, other unit = ROL
Report needs show stock in ROL.
How can I do that?
Thank you vry much!
Cao Huy.

Hi,
In your case, order unit as ROL and material basic unit of measure is M.
PO created only for the order unit ROL, and goods have received from the vendor based on the PO order unit.
So,this MB5B stock on posting date is displayed only the total stock received based on the received GR order unit qty .
stock also managed only ROL unit of measues. it is not possible to list based on the M stock unit.
Regards,
thiru

Similar Messages

  • MB5B - Stock on posting date doesn't show Storage Location field

    Hi All,
    I run report MB5B - Stock on posting date with Stock Types = Storage Loc/Batch Stock, but the report doesn't show
    Storage Location field in result.
    How can I see it in this report?
    Thank you very much for your kind support!
    Cao Huy.

    hi
    what i think i sthis report is only for the OPENINGand CLOSING stock for the period or day
    now whenu give SL field then system will only concider stock from that SL
    the filed of SL will not be viewable in report as it is just opening and closing balance
    regards
    kunal

  • MB5B stock on posting date

    Hi experts,
                            For a material XX which was  zero stock on 15/11/2008.Goods receipt(MIGO 101) done on 15/11/2008 of qty 100kg. So stock was 100kg. I have issued material XX of qty 75 kg to cost center and entered posting date 3/11/2008. My system allowing me to issue that material on 3/11/2008 without any warning or error msg. But at that there was no stock. So that if i check the report MB5B stock on posting date my closing stock showing in negative for 3/11/2008. Our requirement is how to stop this back dated posting? System should not allow me if i am posting on back date?
    Thank you
    SAP

    hi Rehan,
    I have checked all settings also enhancement  but there is no as such control to restrict backposting within current period
    I think its self disipline action not to post backdated GI when GR is done on later date
    Vishal...

  • MB5B - Stock on Posting Date, Specification for data base accec

    Hi,
      I am facing some problem with MB5B Transaction as when we login with t. code MB5B  at the bottom of screen there is radio button selection for specification of database access for best runtime and the default the first radio button is selected i.e Database determines optimum access    but with this report is coming very very slow we have to wait for 4 minuts for each material  and same if we execute by selectting the second radio button i.e start off with material number  i am getting data very fast  with in 5 second  so i want to know what is diffference between these radio buttons if we select first second or third radio buttons
      one more thing we are facing problem from last 4 days only .
    regards,
      zafar

    I dont have these 3 buttons in my MB5B in ECC6 system.
    But I saw OSS Note 1005901 - MB5B: Performance problems
    it explains why it is that slow.

  • Function For stock on Posting date

    Hello gurus,
    Is tehere any standard SAP function to calculate stock on Posting date the same as in MB5B?
    Regards
    Laura

    I do not need a report, I need a function.
    I know MB5B works correctly, but I need a function because I want to use it in a Z report that calculates diferent thinks (one of them the stock on Posting date.
    Regards

  • Any Standard FM  for material stocks on posting date  using  Tcode  MB5B

    Hi,
    I  need   Standard  FM  to get  material stocks on posting date  using   Tcode   :   MB5B
    Stock type  i am using  is  : Storage Location/Batch Stock
    the  Input   i am  providing  is    Material, Plant , Storage Location, selection  date From , selecDate To.
    Then   i need  to get  data  that it  provides   header  and  document  item level.
    Can u please tel me  how do i get  that  material stock data  on posting date and in which tables
    it will be populated in the database.
    ITs required  can u take view and post info
    Thanks & Regards
    sivakumar kasa
    Edited by: siva kumar kasa on Dec 21, 2010 2:30 PM
    Edited by: siva kumar kasa on Dec 22, 2010 7:15 AM

    hi Rehan,
    I have checked all settings also enhancement  but there is no as such control to restrict backposting within current period
    I think its self disipline action not to post backdated GI when GR is done on later date
    Vishal...

  • Stock on posting date-MB5B

    Hi! I'm looking for a function that works as MB5B, I need to calculate the stock on posting date, I used the debugger, but I couldn't find a function.
    Thanks!

    Hi,
       Thare is not so such function module for MB5B.I think that you can copy it to your Custom program and change it .
    regards,
    collysun

  • Restrict goods issue if stock on posting date is zero

    Requirement:
    Current Inventory period : July 2011
    Stock of a material from 01.07.2011 to 30.07.2011 is zero(in MB5B report)
    I upload stock of material  or GRN occur on 31.07.2011. Say Quantity u2013 100
    Now stock as on 31.07.2011 is 100 in MB5B
    Still, Stock of a material from 01.07.2011 to 30.07.2011 is zero(in MB5B)
    Now, If I do goods issue of a material quantity 100 on 15.07.2011. System allows goods issue. though opening and closing stock as on 15.07.2011 is zero.
    After goods issue transaction if I check stock of material on any date between 16.07.2011 to 30.07.2011 , The opening stock and closing stock shows negative.
    I want to restrict goods issue if stock on posting date is zero or less then stock available on posting date.
    Please suggest

    Hi,
    This is not the way SAP is designed. As the previous speakers wrote (and as you noticed yourself), SAP maintains stock figures in the database per month rather than per day. MB5B makes complex calculations in order to find out how much stock you had on a specific date - as you probably noticed on the response time. Performing such calculations every time you do a GI would be unfeasibly heavy task for the system - remember there are organisations that perform hundreds of inventory movements a minute!
    An alternative solution I suppose would be to maintain the daily stock figures in the database. This would make the finding of the stock figure very quick, but on the other hand, the maintenance of such table would be unfeasible - if you post today a GI on say July 1st, you would need to calculate 36 stock figures and update 36 database records!
    Hope this explains the technical issue.
    BR
    Raf

  • Stock in posting Date

    Hi
    Dear Guru
    we have done sum  stocks  close in year ending 2008, in that time we have tranasferd Stock from material to material, we have tranferd all the stocks from material A to Material B.
    But theire is no stcoks in the MMBE for material A , for todays date , when we are going to check MB5B, on 31/03/2008, it is showing valuated stock, of sum quantity,
    we have checked all the Material Stock Transaction, no where it is showing stock eccept in MB5B That to posting date on 31/03/2008.
    so how to remove that stock on posting date(Valuated stock). only in MB5B.
    Kindly suggest
    Madhu

    hi
    For doing stock transfer , stock must be avalaible on current date and on the last day of the previous month, if u want to to do transfer postion on previous month's date.
    reward if useful
    Amit

  • Stock on posting date GL wise

    dear sir,
    can i have the transaction code for stock on posting date GL wise.
    IN MB5B THERE IN NO FIELD WITH GL AND IN MB5B THERE IS NO POSTING DATE

    Hi,
    There is a posting date in MB5B  !!!!!!!!!!!!!!!!!
    The whole point of MB5B is to give you the stock on a posting date.
    The field is called "Selection date".
    Steve B

  • Display stock on posting date for a consignment stock

    Dear guru.
    I want to display the stock on posting date for a consignment stock (special stock indicator = "W" ) to display this stock and the linked movements  for a specific customer.
    MB5B donu2019t have the field customer in the selection view.
    What transaction can I use ?
    Thanks in advance.

    Hi,
    In MB5B in special stocks indicator you select W
    and select special stock
    You will get it
    BR
    Diwakar
    Edited by: diwakarnd deshpande on May 20, 2008 7:02 PM

  • Stock on posting date in WH

    Hi All,
    Like MB5B is there any t.code or table to see stock on posting date in Warehouse? (like in so and so bin and in that S.type)

    Hi
    You can use transaction LT22 to see all transfer orders to or from a storage type and storage bin.
    In the section Reference you enter if it should be source or destination data that should be taken into account.
    Don't forget to enter the date at the bottom of the screen.
    Br,
    Erik

  • Calculation of unrestricted stock on posting date

    Hello,
    In a certain report that we developed for our customer one of the data
    Is "unrestricted stock on posting date".
    Is there a function that calculate this data, and if not what is the best way to do it?
    Thank you in advance,
    Haim Gimelfarb

    Thank you,
    But this is not the answer that I looked for.
    Mb5b is a transaction, and I need a function that can Calculate unrestricted stock on posting date.
    Becaus the stock in posting date is only part of the information in the report.
    Thank you in advance
    Haim Gimelfarb

  • Table of balance stock split by status stock on posting date

    Could you please suggest me for  the table of balance stock split by status stock on posting date?
    MCHB can not support my requirement because it  has current stocks.

    I give you for exsample data.
    Stock on 01.03.2011  (This is a selection date)
    Material code   ||  Batch  ||   Base unit  ||  Unrestricted use stock   || Stock in quality inspection  ||  Blocked stock
    A0001              || 09K1    ||    EA           ||     10                                ||              2                             ||
    A0002              || 10K1    ||    EA           ||                                         ||              9                             ||   3
    Stock on 31.03.2011  (This is a selection date)
    Material code   ||  Batch  ||   Base unit  ||  Unrestricted use stock   || Stock in quality inspection  ||  Blocked stock
    A0001              || 09K1    ||    EA           ||     5                                  ||              2                             ||   1
    A0002              || 10K1    ||    EA           ||      6                                 ||                                             ||

  • Order forecast Monitor screen will it pick base UOM or any other unit of measure?

    Hi All,
    In OFM screen showing only qty against key figures but UOM not showing.
    I would like to know in OFM screen whether always qty will show in base UOM or any other unit of measure?
    please can you suggest on this.
    Regards

    Venkat,
    SNC supports multiple UOM (Base UOM and Document UOM) only for the below Screens:
    ● Detail screen for purchase orders
    ● Detail screen for replenishment orders
    ● Detail screen for invoices
    ● Detail screen for advanced shipping notifications (ASNs)
    ● Query To Be Confirmed for the purchase order worklist
    Ref :
    http://help.sap.com/saphelp_snc700_ehp02/helpdata/en/46/9c3cff7ded371ae10000000a11466f/content.htm?frameset=/en/46/827d1…
    So, OFM screen data will always be in Base UOM only.
    Regards,
    Bharath

Maybe you are looking for

  • Failed to open the connection. Details: [Database Vendor Code: 12154].

    I have installed Crystal reports server 2008 VI on a Windows 2008 64bit OS. I have added SQL server and Oracle reports through CMC. I then installed Oracle 10g client 32bit on the server and created and tested the required DSNs using ODBC 32bit. All

  • MacBook Pro suddenly running slow

    I used to be able to mulit function, moving from multiple screens quickly without any delays in action.  Now I have to wait patiently for things to "keep up".  I have always backed up to my time capsule, but I am (and will) be away from the capsule f

  • Can I use more than one transition when creating a slideshow in IDVD

    I want to use more than one transition in IDVD when creating a slideshow, is this possible?

  • I cant "drag and drop" music onto my ipod anymore can i get help please???

    Hi, Since i have my ipod i have always dragged and dropped music from my itunes library onto my ipod but now every time i open itunes it tries to sync my whole library onto my ipod which i dont want, but now i cant drag nd drop onto it anymore , and

  • Reader 10.1.3 freezes SAP

    We have the SAP GUI 7.2 and within the GUI when we view a pdf it opens fine, just like opening a pdf in IE.  When we click the email button it will open outlook and have the pdf attached to send the email.  At this point when we send the email as nor