MB5B Valuated Stocks or Storage Location
Hi All,
When I run MB5B for Valuated Stocks it giving me stock volume which matches what MB5L states.
However, when I run it for Storage Location it is giving me a different volume.
Which is the correct transaction to based closing stock volumes off of.
Many Thanks,
Brian
Hi,
Usually it is recommended to execute MB5B for valuated stocks. you need to check the input parameters which you are passing, give a sufficient date range and check for back dated material movement postings.
Regards,
Similar Messages
-
Stock report in BW (valuated stock and Storage Location level)
Dear All,
Regards.We got an situation here,
Case 1: R3 (MB5B) (Both "Storage loc" and "Valuated stock" shows the same Stock Qty)
1).The BW Stock Report shows values the Correct Values for "Receipt Qty" and "Issue Qty" with the Correct "Quantity total Stock" aswell.
Case 2 : R3 (MB5B) (Stock is different between "Storage Loc" and "Valuated Stock")
1).The BW Stock Report shows the "Quantity Total Stock according to VALUATED STOCK Level(MB5B),but the "Receipt Qty" and "Issue Qty" according to STORAGE LOCATION Level(MB5B) .
We followed the "How to Handle Inventory "Doc with the proper sequence of Loading of Infosources and Compression.The data is sitting fine at the cube level.
It would be great if someone can throw some Light on this issue,on how the Query shows a COMBO of both Valuated stock and Storage Location stock....Held up with this issue for quite sometime..Had a look at the Oss Note (589024)...........
Manythanks
ArunHI,
In Inventory we have two quantity fields given to satisfy the requirement.
Valuated stock Qty - 0VALSTCKQTY
Storage Location qty - 0TOTALSTCK
You can make use of them based on your requirement. Hope this helps for you.
Thanks,
Arun -
Valuated Stocks at Storage location Level
Hi Gurus,
Our client wants to develop a report on Quantity and Value of the Stocks at Storage location level. Is there any standard table/T.code where we can see this? We have tried in the Standard reports too.
We have tried this getting from various tables like MARA,MARC,MARD,s031 & S032. But it is hitting the performance heavily. Please advice if anything can be done on this.
with regards,
SaakithyanRefer this link
http://wiki.sdn.sap.com/wiki/display/ERPSCM/StockTablesandStockTypes
check reports: MC.9 ,S_p00_07000139 also if it fits -
What are the list of .stock by storage location
hi, iwant to devlop the report to stock by storage location.give me description about a report to list of .stock by storage location. what are the functional spects for this report, what are the tables and fields we have to used for this report plz give me sample report.
Dear Radha Krishna,
You can either use program RMMMBESTN (from SE38) or TCode MMBE. However, you can copy the above program into a 'Z' program and change the logic if your requirement is not served by the standard report or you want to enhance the same.
Go through standard Reports:
MMBE Stock Overview
MB52 List of Warehouse Stocks on Hand
MB53 Display Plant Stock Availability
MB54 Consignment Stocks
MB5B Stocks for Posting Date
MB5K Stock Consistency Check
MB5L List of Stock Values: Balances
MB5T Stock in transit CC
MB5W List of Stock Values
MBBS Display valuated special stock
MBLB Stocks at Subcontractor
MBSF Release Blocked Stock via Mat. Doc.
MBW1 Special stocks via WWW
MC.1 INVCO: Plant Anal. Selection: Stock
MC.5 INVCO: SLoc Anal. Selection, Stock
MC.9 INVCO: Material Anal.Selection,Stock
MC.D INVCO: MRP Cntrllr.Anal.Sel. Stock
MC.H INVCO: Business Area Anal.Sel. Stock
MC.L INVCO: Mat.Group Analysis Sel. Stock
MC.P INVCO: Division Analysis Sel. Stock
MC.T INVCO: Mat.Type Anal.Selection Stock
MC48 INVCO: Anal. of Current Stock Values
MC49 INVCO: Mean Stock Values
MC50 INVCO: Analysis of Dead Stock
MC8M Read Opening Stocks
MCB) INVCO: Long-Term Stock Selection
MCC4 Set Up INVCO Info Structs.from Stock
MCH: RIS: STRPS/Mvmts + Stock - Selection
MCKJ Selection version tree: Stock
MCKR User-spec. sel. vers. tree: Stock
MCNB BW: Initialize Stock Balances
MCSK Call Standard Analyses of Stocks
MD04 Display Stock/Requirements Situation
ME27 Create Stock Transport Order
ME2O SC Stock Monitoring (Vendor)
MF65 Stock Transfer for Reservation
MI35 Batch Input: Post Zero Stock Balance
MIQ1 Batch Input: PhInvDoc. Project Stock
MM73 Special Stocks: Preparation
MM74 Archive Special Stocks
MM75 Display Archive of Special Stocks
MMBE_OLD Stock Overview
MMN1 Create Non-Stock Material &
MS04 Planning Scenario: Stock/Reqmts List
MS29 Calculate Sim. Initial Stock
Tables:
MKPF Header: Material Document
MSEG Document Segment: Material
IKPF Header: Physical Inventory Document
ISEG Physical Inventory Document Items
SBSE Stock Mngmt Levels for Inventory Sampling
SKPF Header Data: Inventory Sampling
SLGH Elements of Stock Population
SSCH Strata of Inventory Sampling
T156 Movement Type
MSKA Sales Order Stock
MSKAH Sales Order Stock: History
MSKU Special Stocks with Customer
MSKUH Special Stocks at Customer: History
MSLB Special Stocks with Vendor
MSLBH Special Stocks at Vendor: History
MSPR Project Stock
MSPRH Project Stock: History
MSSAH Total Sales Order Stocks: History
MSSL Total Special Stocks with Vendor
MSSQ Project Stock Total
MSSQH Total Project Stocks: History
http://goldenink.com/abap/files_in_sap.html
http://www.erpgenie.com/abap/tables.htm
Regards,
Naveen. -
Hello there,
Could anyone tell me the possibility of populating stock at storage location. I am using 2lis_03_BF and 2lis_03_UM for populating the Material Movements cube in BW 3.5. When we checked the data all the values for materials are populated against Plant level and the quantities at Plant - Storage location level.
I have implemented the SAP How to Document for populating the values at storage location level but I have two issues on this.
1. The actual values of materials are not accurate when displayed at Plant-Storage location level. Because they are calculated using Average value formula as per the note. How to realize the actual values at storage location level also taking into consideration the respective revaluation done at plant level?
2. If I run the report for all Plants - storage locations it is either timing out or taking a lot of time to display. We are maintaining 45 plants and 10 storage locations.
Could anyone tell me how to realize these values at storage location in an efficient way if possible.
Thanks in advance,
RajHi Anil,
Thanks for the reply. Yes I did implement that note to get the values at storage location level. The values I am getting are not accurate after following this note. Example It is displaying the value of the material equally for all storage location which are valuated at different prices. ( Taking average values).
Also If the material was revaluated the price correction is created at plant level and it is not taking the correction into consideration for displaying the individual values i.e against respective storage location. But I am getting the total result at storage location accurately.
Is it possible in BW to display the values at storage location accurately as in R/3.
Thanks,
Raj -
STOCK STATEMENT STORAGE LOCATION WISE
Dear All,
Ca we able to take Stock Value on storage location wise for the particular date.
Thank You,
Warm Regards
Mani.Hi,
Stock statement storage location wise can be get, by using T-Code MB5B.
But Quantity can be gettable on storage location basis. However value can be gettable on Plant level.
First you have to take the plant stock on any particular date in which you can get Plant Qty and Plant Value. Please divide Plant value by Plant Qty, you can get Rate of each material. After that take storage location wise stock and multiply with Rate.
Please note that in SAP prices are maintained on Plant level basis. Hence, it is a small workaround.
Secondly you get Monthend Stock of any month at storage location level with value using T-code mc.9
Hope this will help you.
Please reward if useful.
Ishu -
Allow negative stock on storage location
Dear all,
When we allow negative stock on a storage location. At posting time we have an error "deficit stock of batch assignment". Anybody got a clue of what has to be done to correct this ???
Cheers,
OlivierDear Oliver,
Please do the following checks.
Prerequisites
To work with negative stocks, you have to:
· explicitly allow this in the Customizing system for each valuation area and storage location
· set the indicator Neg. stocks in plant in the material master record of the individual materials (storage data)
Negative stocks are allowed for special stocks if you have activated negative stocks in the valuation area and for the special stock concerned in the plant. You do not need to activate negative stocks in each material master record.
Procedure
You can define whether you want to allow negative stock by making the relevant settings for each storage type in Customizing.
To do this, choose Logistics Execution -- Warehouse Management--- Interfaces -- Inventory Management -
Allow Negative Stocks in Interim Storage Types --- Allow negative stock for each storage type in the Implementation Guide (IMG).
When the allow negative stock indicator is set, the system lets you post negative quants to the corresponding storage type.
Additionally, you can define whether you want the system to issue an error message (E) or a warning message (W) or no message (blank) when posting negative stock. You can make the relevant setting in the activity Control of System Messages in Warehouse Management. You can determine the notification type using the parameter MSV in the user master record.
To do this, choose System --- User profile --- Own data.
Then select the tab page Parameters.
Enter MSV in the Parameters field and enter the value with which you want to group certain users in the value field (for example 01).
Choose Logistics Execution ® Warehouse Management ® Interfaces ® Inventory Management ® Allow Negative Stocks in Interim Storage Types ® Control of System Messages in Warehouse Management in the Implementation Guide (IMG).
Create a new entry with the version number (Value) you have chosen and enter the desired system reaction in the Message Category field (E, W, or blank).
Regards
Mangal -
Opening and closing stock at storage location level
Dear all
I need a std report which will give the opening and closing stock at storage location level, Or should I go for dev. if yes please guide me.
Regards
SamuelHi,
check if you can use S_P00_07000139 report, select "Display stock movement by plant (with amount) and further select Sloc from layout.
Regards,
Vikas -
Dear All,
Needed some of the Reports in MM Material Mangment
1. Stock Report Value Wise
2. Stock Report Period Wise
3. Stock Report Storage Location wise
4. Stock Report WBS wise
5 . Stock Value
Can I get all my requirement in One Report; or Individually also is fine. Please DoCheck MC.9
It will be helpful. you an drill down the report as per your need.
Regards,
S Anand -
Negative stock for storage location M7 021
Hello
I use negative stock for some materials
When I want to post document in MIGO - 551 scrapping, I have error message M7 021: Deficit of BA Unrestricted-use 1.100 EA: 24000641 XXXX 9999 YYYYYYY
This is ERROR. When I change storage location from 9999 to 0002 message have status WARNING.
I set - allowed negative stock in material master data MM02 and for plant in WB02
Where should I set "allowed negative stock" for storage location, because I need warning for location 0002?
Could You help me?
Thank You in advance
ArekGo to SPRO>MM>IM>Goods Issue/Transfer posting>Allow negitive stock allowed for plant and then chose the plant and then go for the storage location --> mark the same.
If use ful award points -
Transfer stock from Storage Location to Bin
Dear All,
what is the procedure to transfer stock from Storage Location to Bin ( T.Code and Mov.Type)
waiting for your Reply
with best regards
SumanDear Kiran
Thnaks for your reply
Im doing Process as below...
T.Code:LT01
click on Transfer Order ( Header) select WITHOUT REFERENCE
WHNO: CWH
MOV.TYPE:999
MATL:
QTY:PLANT:
S/L
NEXT SCREEN
DESTINATION
ST.TYPE:
STORAGE SEC:
BIN NO:
AFTER PRESS ENTER SYSTEM GIVE BELOW ERROR MESSAGE
"CANNOT FIND SOURCE STORAGE BIN"
AFTER THAT IF I ENTERED
FROM
ST.TYPE:
STORAGE SEC:
BIN NO:
THEN SYSTEM GIVES ERROR MESSAGE
STORAGE TYPE XXX DOESNOT ALLOW NAGATIVE STOCK FIGURES
EVEN IN STOCK OVER VIEW MATL. IS AVAILABLE
PL. CORRECT IF IM WRONG
with best regards
Suman -
Re:Valuation control at Storage location
Dear Guru's,
I have below requirement :
I want to control the Valuation of a material in Storage location or at material level. i.e that particular Raw material will be non-valuated or all the materials in 1 particular storage location are non-valuated materials
I know that can be control at Plant/company code level ( Plant as valuated or not valuated )
Also is it possible to mantain same raw material code as Valuated in 1 plant & non-valuated in other company code/Plant ?
Kindly guide
Regards,
IshwarHi Ishwar,
If you had mentinoed your business requirement then it would be easier for us to resolve your issue. However it wont be possible to have valuation control at Storage location.
but you can have some alternative solution.
1. Create New Material Type (say ZXX) which should have only Qty update Ticked ( Do not ticket Value update Checkbox).
2. Create Material Code of Newly Created Material Type (ZXX) . These newly created Part code will not be valuated.
Also is it possible to mantain same raw material code as Valuated in 1 plant & non-valuated in other company code/Plant ?
It is very much possible to have Same part code to be valuated in 1 plant and non-valuated in Other Plant, Provided your valuation occurs at Plant level and not the company code level.
Regards,
S Anand -
Regarding how enable plant stock and storage location view
hi all:
Could you please tell me how enable plant stock and storage location view for MM01?
couldn't be better if there are detailed steps .
Thank you very much!Hi,
The views depend to material type. So you need update in the material type attributes.
SPRO - Logistic General - Material Master - Basic Settings - Material Types - Define Attributes of Material Types
Double click on the material type and update the views in 'User Departments'.
Thanks. -
Stock valuation down to Storage location level
Dear all,
System setup for stock valuation is till Plant level. And understand that's how data stored in table MBEW and MBEWH until plant level only.
Eventhough that is system standrd, is that possible to get the stock valuation until Storage location level?
For eg: In MB5B, there is opening stock, closing stock and the material movement posting. I need to get opening and closing stock for each storage location.
Could you please comment if there are tables store these data? Kindly comment.Hi Afshad Irani,
Thanks for your reply. Understand from the previous post that stock valuation for storage location can be done via table MARDH or report MC.9, but this tools are excess base on period/month basis.
My case, i need to report storage location stock for both (1)last month 06.2010 and (2)yesterday's stock 06.07.2010. So i can use MARDH table to report (1)last month stock for each storage location. While for (2) yesterday stock, table MARDH isn't help.
Could you please advice further? -
Report by month with Valuated stock and special stock by storage location
Dear All,
I need a report similar to MCBE with stock level (including "storage loc/batch Stock" plus "special stock(Q)") by plant and storage location.
I try it with MCBE tcode, but i only get "storage loc/batch Stock" in column named valuated stock. Also I can obtain that information in MB5B tcode, but I cannot get data by storage location, only plant.
Does anyone know how can solve it?
Thanks in advance,
SebastiáHi,
Use MC.9 T.code.
click on "switch drilldown" and select storage location.
Regards
Hari
Maybe you are looking for
-
Hi All I need some advice regarding a wireless connection to my inkjet printer. I have recently replaced my router with a Natgear WNDR3700 dual band device (2.4G and 5G). Connected and working wirelessly are my MacBook Pro, iPhone, Zeppelin Air, smar
-
HT4910 i had pdf files in my ibook icon, ipluged in ipad and lost all the files?
I had pdf files in ibooks, i pluged my ipad2 into my pc. got into itunes and i think i lost them. can i retreave it ??
-
My video player, music player and all media stops each x seconds of playing
Since I installed the IOS 5.1.1 each time I play something, for example you tube, or a video, or music, they stop at each, let say 5 o 10 sconds without a reason, and I have push play agin and again.
-
hi friends when we look at any GPO in Group policy management snap-in, each GPO has these four main sections 1-software settings 2- windows settings 3- administrative templates 4- preferences my question is, what logic or criteria e
-
Hi all, Just wondering if any one would know the answer to this one... We have ISE linked to AD...all working well, however, when a user is given a certificate, the user won't be able to connect to the (wireless) network due to certificate problems..