MB5T Issue

HI,
I have an issue as below;
1) Created cross company code stock transfer purchase order with delivery & shipping say example 100 PCS
2) Created outbound delivery in VL10B
3) Created Transfer order & confirm (Warehouse Managed & HU managed), movement 643 (TF to cross company) is updated in Purchase order.
4) The i returned say example 50 PCS back to supplying plant using movement type 122
5) when i am checking MB5T it is showing me stock in transit for 50 PCS
Now what i want is that i need to take this 50 PCS stock back in supplying plant so that stock in transit will disappear
Appreciate your inputs how to solve this.,
BR
Shabir

Hi
There are two options
1.You can repeat the 4th step what you have mentioned to clear the stock in transit
2.
a.Do the GRN in reeceiving plant --Tcode --MB01 or MIGo
b.Then create the Cross company STO from reciving plant to supplying plantand complete the process.
Regards
Damu

Similar Messages

Issue in Stock transfer

Hi
We have an issue in Stock Transfer. the Stock transfer happens between a manufacturing plant which is excise registered and a depot, which is not excise registered. We raise a Stock Transfer order from the depot on manufacturing plant with a freight component. The system creates a freight provision in the depot, when the goods issue is done by the manufacturing plant against the stock Transfer Order. After the goods issue the material is shown in Transit in report MB5T until the same is recieved by the depot. However, some goods are lost in transit and the same is recovered from the freight vendor. In such a case, we do a MIGO for the actual quantity recieved at depot and pass a debit note to vendor by loading the difference to material.
The issue is:
1. the quantity and the value of the physical inventory recieved have been rectified by a recovery from the vendor.
2. However, how can we remove the goods, which we have short recieved from the report MB5T
The certain work around we have thought could be :
1. Receive the quantity in full at the recieveing Depot and then scrap the material to the extent it has been received short through M Type 551. However, the issue arises in case of transfer of goods from one manufacturing plant to another, where in both are excise registered. In such a case, goods receipt in full would not be correct as it would raise issues in excise registers.
Please suggest
Regards
Sanil K Bhandari

Hi,
One suggestion is you can pass a document through MB1A for material loss in transit for the mateial lost.
Followign accounting Entry would be hit :
Transporter shrinkage Clearing Dr
to Inventory Raw Mateial Cr
You can pass the same document through Mvt. Type 951 (GI Lost in Transit).
Thanks & Regards,
Taral Patel

To clear stock in Transit - MB5T

Hi All,
I done a Stock Transport Order with 351 and 101 Mvt type.In MB5T i have a material with quantity w.r.t PO.
Not possibe to cancel that GI document..Kinly clarify how to clear the stock in transit.
Thanks and Regards
SAP MM User

Hi,
At the issuing plant with 351 Mvt, you'll find the stock in MB5T as "stock in Transit" at the recieving plant.
After making GR 101 at recieving Plant, this quantity will cleared automatically.
Now tell me what's the issue ypu are facing?
Once 101 is done, you can not cancel 351 material document. For that you have to reverse 101 first and the 351 reversal
Umakanth R

Clearing stock in transit (MB5T)

I am unable to clear the stock in transit. We do not necessarily need to receive these small quantities, it would be acceptable to write the stock off to clear this report and remove this stock that does not really exist.
I have tried using the Transaction code MB11 and movement type 305 but the following error message appear:
"PL Stock in transfer exceeded by 168,210 AT : 62002571 3203 1000 NT08022A"
How can I clear the stock in transit?

Two way you can clear this
1) do the GR using MIRO with 101 movement and than if you don;t need this stock then scrap it
or
2) use VL09 and enter your shipping plant and delivery number and bring the issue document and cancel this than only you will clear the MB5T report

MB5T Customised report

Hi,
I need in transit report for include delivery note as well as batch number for which MB5T report is being customized.
Logic would be
Goods in transit = Goods issue (for a delivery note) - Goods delivered (GR qty in EKBE)
I am referring LIPS, EKBE tables for this report - Now if there is delivery split OR batch split - I have to link particular line item of STO to the delivery note, goods issue document and Material document (for delivered qty)
I have PO history category in EKBE- BEWTP
E - For GR
L - Delivery note
U - Goods issue
What is the common link between all these document, particularly, GR document and GI document?
Thanks,
RJS

Hi,
Please check the tables VBFA,MSEG.
Regards,

Stock in transit issue

Hi All,
There is a transport SA between 2 plants,Plant A and B. Plant A has issued 34 qty to plant B .
But when Plant B is recieving the quantity it is not accepting system is giving error message M7 021 stock in transit exceeded by 19 PCE.
1) MB5T shows 34 qty in transit.
2) Schedule line is present as on the delivery date of the GR.
3) UOM is same .
This issue is quite urgent.
Please revert ASAP

Vineet,
Stock in transit is PO wise. It means that stock is allocated to POs, you can do GR only for the quantity which is allocated to your PO and you cannot use quantity which is allocated to other POs..
It is also possible that there are problem with dates - are you trying to do GR in past - in this case you can check your stock level in MB5TD.
Regards,
Csaba

Ref mb5t ..

Hi All,
         I need to change the Selection screen in MB5T T-code. I have got list of user exit program of mb5t t-code.
MBCF0002            Customer function exit: Segment text in material doc. item
MBCF0005            Material document item for goods receipt/issue slip
MBCF0006            Customer function for WBS element
MBCF0007            Customer function exit: Updating a reservation
MBCF0009            Filling the storage location field
MBCF0010            Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011            Read from RESB and RKPF for print list in MB26
MB_CF001            Customer Function Exit in the Case of Updating a Mat. Doc.
In which User Exit program can i change or add one selection screen Field..could u guide me..

hi,
for changing the selection screen u ll have to make changes to the prog RM07MTRB. It is the main prog for transaction MB5T. You search the prog with SELECT_OPTION - and u ll find the portion of code defining the Selection screen layout. You will have to change that in order to make MB5T come with ur own customized fields.
But the bad news is - it is a standard prog. So untill n unless u have the access key - u ll not be able to make modifications.
I would suggest you to copy the main prog - make changes according to ur needs and attach a custom transaction code to it - like ZMB5T.
Cheers.
SKC

STO line still appears in MB5T

Hi,
I have an issue in MB5T. One of the lines of the STO is still appearing. This line is the automatically generated line of empties material. Its STO quantity is 20 while its delivery quantity is 60. I believe this difference is causing to appear in MB5T. The goal is to remove this line in MB5T.
Please advise on how to do this.
Some note: GR indicator is not set for empties material line (Standard behavior)\
Thanks!

Hi,
I think what happens is that GI is greater than GR. Initially, the quantity in the delivery is the same as STO. But later on, it was changed. Thus, causing the difference. Because of this, this line is appearing in MB5T and the concern is to remove that line in the report.
If I'm not mistaken the process is STO->Delivery->GI. Is that correct?

New DVR Issues (First Run, Channel Switching, etc.)

I've spent the last 30 minutes trying to find answers through the search with no luck, so sorry if I missed something.
I recently switched to FIOS from RCN cable in New York. I've gone through trying to setup my DVR and am running into issues and was hoping for some answers.
1. I setup two programs to record at 8PM, I was watching another channel at the time and only half paying attention. Around 8:02 I noticed a message had popped up asking if I would like to switch channels to start recording. I was expecting it to force it to switch like my old DVR, but in this case it didn't switch and I missed the first two minutes of one of the shows. I typically leave my DVR on all day and just turn off the TV, this dual show handling will cause issues with that if I forget to turn off the DVR. Is there a setting I can change that will force the DVR to choose one of the recording channels?
2. I setup all my recordings for "First Run" because I only want to see the new episodes. One show I setup was The Daily Show on comedy central, which is shown weeknights at 11pm and repeated 3-4 times throughout the day. My scheduled recordings is showing all these as planned recordings even though only the 11pm show is really "new". Most of the shows I've setup are once a week so they aren't a problem, but this seems like it will quickly fill my DVR. Any fixes?
Thanks for the help.
Solved!
Go to Solution.

I came from RCN about a year ago. Fios is different in several ways, not all of them desirable. Here are several ways to get--and fix--unwanted recordings from a series recording setup.
Some general principles.
Saving changes. When you originally create a series with options, or if you go back to edit the options for an existing series, You MUST save the Series Options changes. Pretty much everywhere else in the user interface, when you change an option, the change takes effect immediately--but not in Series Options. Look at the Series Options window. Look at the far right side. There is a vertical "Save" bar, which you must navigate to and click OK on to actually save your changes. Exiting the Series Options window without having first saved your changes loses all your attempted changes--immediately.
Default Series Options. This is accessed from [Menu]--DVR--Settings--Default Series Options. This will bring up the series options that will automatically be applied to the creation of a NEW series. The options for every previously created series will not be affected by a subsequent modification of the Default Series Options. You should set these options to the way you would like them to be for the majority of series recordings that you are likely to create. Be sure to SAVE your changes. This is what you will get when you select "Create Series Recording" from the Guide. When creating a new series recording where you think that you may want options different from the default, select "Create Series with Options" instead. Series Options can always be changed for any individual series set up later--but not for all series at once.
Non-series recordings. With Fios you have no directly available options for these. With RCN and most other DVRs, you can change the start and end times for individual episodes, including individual episodes that are also in a series. With Fios, your workarounds are to create a series with options for a single program, then delete the series later; change the series options if the program is already in a series, then undo the changes you made to the series options later; or schedule recordings of the preceding and/or following shows as needed.
And now, to the unwanted repeats.
First, make sure your series options for the specific series in question--and not just the series default options--include "First Run Only". If not, fix that and SAVE. Then check you results by viewing the current options using the Series Manager app under the DVR menu.
Second, and most annoying, the Guide can have repeat programs on your channel tagged as "New". It happens. Set the series option "Air Time" to "Selected Time". To make this work correctly, you must have set up the original series recording after selecting the program in the Guide at the exact time of a first run showing (11pm, in your case), and not on a repeat entry in the Guide. Then, even it The Daily Show is tagged as New for repeat showings, these will be ignored.
Third, another channel may air reruns of the program in your series recording, and the first showing of a rerun episode on the other channel may be tagged as "New". These can be ignored in your series if you set the series option "Channel" to "Selected Channel". Related to this, if there is both an SD and HD channel broadcasting you series program, you will record them both if the series option "Duplicates" is set to "Yes". However, when the Channel option is set to "Selected Channel", the Duplicates Option is always effectively "No", regardless of what shows up on the options screen.
As for you missing two minutes, I have sereral instances in which two programs start recording at the same time. To the best of my recollection, whenever the warning message has appeared, ignoring it has not caused a loss of recording time. You might have an older software version. Newest is v.1.8. Look at Menu--Settings--System Info. Or, I might not have noticed the loss of minutes. I regularly see up to a minute of previous programming at the start of a recording, or a few missing seconds at the beginning or end of a recording. There are a lot of possibilities for that, but the DVR clock being incorrect is not one of them. With RCN, the DVR clocks occasionally drifted off by as much as a minute and a half.

Pension issue Mid Month Leaving

Dear All,
As per rule sustem should deduct mid month joining/leaving/absences or transfer scenarios, the Pension/PF Basis will be correspondingly prorated. But our system is not doing this. In RT table i have found 3FC Pension Basis for Er c 01/2010                    0.00           6,500.00.
Employee leaving date is 14.04.2010. system is picking pension amout as 541. Last year it was coming right.
Please suggest.
Ashwani

Dear Jayanti,
We required prorata basis pension in case of left employees and system is not doing this. This is the issue. As per our PF experts Pension amount should come on prorata basis for left employees in case they left mid of month.System is doing prorata basis last year but from this year it is deducting 541. I am giving two RT cases of different years.
RT table for year 2010. DOL 26.04.2010
/111 EPF Basis              01/2010                    0.00           8,750.00
/139 VPF Basis              01/2010                    0.00           8,750.00
/3F1 Ee PF contribution     01/2010                    0.00           1,050.00
/3F3 Er PF contribution     01/2010                    0.00             509.00
/3F5 Ee Mon PF contribution 01/2010                    0.00           1,050.00
/3F6 Ee Ann PF contribution 01/2010                    0.00          12,600.00
/3F9 PF adm chrgs * 1,00,00 01/2010                    0.00              96.25
/3FA PF basis for Ee contri 01/2010                    0.00           8,750.00
/3FB PF Basis for Er Contri 01/2010                    0.00           8,750.00
/3FJ VPF basis for Ee contr 01/2010                    0.00           8,750.00
/3FL PF Basis for Er Contri 01/2010                    0.00           6,500.00
/3F4 Er Pension contributio 01/2010                    0.00             541.00
/3FC Pension Basis for Er c 01/2010                    0.00           6,500.00
/3FB PF Basis for Er Contri 01/2010                    0.00           8,750.00
/3FC Pension Basis for Er c 01/2010                    0.00           6,500.00
/3FJ VPF basis for Ee contr 01/2010                    0.00           8,750.00
/3FL PF Basis for Er Contri 01/2010                    0.00           6,500.00
/3R3 Metro HRA Basis Amount 01/2010                    0.00           8,750.00
1BAS Basic Salary           01/2010                    0.00           8,750.00
RT table for year 2009. DOL 27.10.2009
                                                                                /111 EPF Basis              07/2009                    0.00           9,016.13
/139 VPF Basis              07/2009                    0.00           9,016.13
/3F1 Ee PF contribution     07/2009                    0.00           1,082.00
/3F3 Er PF contribution     07/2009                    0.00             628.00
/3F5 Ee Mon PF contribution 07/2009                    0.00           1,082.00
/3F6 Ee Ann PF contribution 07/2009                    0.00           8,822.00
/3F9 PF adm chrgs * 1,00,00 07/2009                    0.00              99.18
/3FA PF basis for Ee contri 07/2009                    0.00           9,016.00
/3FB PF Basis for Er Contri 07/2009                    0.00           9,016.00
/3FJ VPF basis for Ee contr 07/2009                    0.00           9,016.00
/3FL PF Basis for Er Contri 07/2009                    0.00           5,452.00
/3FB PF Basis for Er Contri 07/2009                    0.00           9,016.00
/3FC Pension Basis for Er c 07/2009                    0.00           5,452.00
/3FJ VPF basis for Ee contr 07/2009                    0.00           9,016.00
/3FL PF Basis for Er Contri 07/2009                    0.00           5,452.00
/3R4 Non-metro HRA Basis Am 07/2009                    0.00           9,016.13
1BAS Basic Salary           07/2009                    0.00           9,016.13
Now please suggest what to do. where is the problem ? If have also checked EXIT_HINCALC0_002 but nothing written in it.
With Regards
Ashwani

Open PO Analysis - BW report issue

Hello Friends
I constructed a query in BW in order to show Open Purchase Orders. We have custom DSO populated with standard
datasource 2lis_02_itm (Purcahse Order Item). In this DSO we mapped the field ELIKZ to the infoobject 0COMP_DEL
(Delivery completed).
We loaded the data from ECC system for all POs and found the following issue for Stock Transport Purchase orders (DocType = UB).
We have a PO with 4 line items. For line items 10 and 20, Goods issued, Goods received and both the flags "Delivery
complete" and "Final delivery" checked. For line items 30 and 40, only delivery indicator note is issued for zero
quantity and Delivery complete flag is checked (Final delivery flag is not checked) in ECC system. For this PO, the
delivery completion indicator is not properly updated in the DSO for line items 30 and 40. The data looks like the
following:
DOC_NUM     DOC_ITEM      DOCTYPE     COMP_DEL
650000001       10     UB        X
650000001       20     UB        X
650000001       30     UB
650000001       40     UB
When we run the Open PO analysis report on BW side this PO is appearing in the report but the same is closed in ECC
system.
Any help is appreciated in this regard.
Thanks and Regards
sampath

Hi Priya and Reddy
   Thanks for your response.
                     Yes the indicator is checked in EKPO table for items 30 and 40 and delta is running regularly for more than 1 year and no issues with other POs. This is happening only for few POs of type Stock Transport (UB).
                    I already checked the changes in ME23N and the Delivery completed indicator was changed and it reflected in EKPO table. Further, i checked the PSA records for this PO and i am getting the records with the Delivery completed flag but when i update from PSA to DSO the delivery completed indicator is not updating properly.
                   In PSA, for item 30 i have the following entries. Record number 42 is capturing the value X for ELIKZ but after that i am getting two more records 43 and 44 with process key 10 and without X for ELIKZ. I think this is causing the problem.
Record No.    Doc.No.                    Item              Processkey         Rocancel     Elikz
    41               6500000001            30                    11                            X           ---
    42               6500000001            30                    11                            ---           X
    43               6500000001            30                    10                            X           ---
    44               6500000001            30                    10                            ---         ---
(Here --- means blank)
Thanks and Regards
sampath

HP LaserJet Enterprise 600 M602 driver issue

Hello,
I've got issue with 600-series printers. We use the latest UPD drivrer ver. 61.175.1.18849 and print from XenApp 6.5. The error occurs every time when users try to print jpg files from XenApp session. It only happens with 600 series printers and UPD.
Also I've tried to assign native 600-series driver ver. 6.3.9600.16384 and it works good. But with that driver system says that it's color printer and it brokes our printing reports. These reports are very important for us. So we can't use printer and that driver as well.
Printer installed on Windows Server 2012 R2. All clients are Windows 7 x64. XenApp Servers are Server 2008R2.
Is it possible to get fixed UPD driver or correct native driver for Server 2012 R2?
Regards,
Anatoly

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
Click on New Post.
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Windows 7 displays error message when exiting +cursor issue

Two issues here. CS5 Phoshop on Wind 7 64 bit.
Physical processor count: 8
Processor speed: 3073 MHz
Built-in memory: 12279 MB
Free memory: 9577 MB
Memory available to Photoshop: 10934 MB
Memory used by Photoshop: 80 %
Image tile size: 128K
First issue is since the latest automatic Adobe update (why fix what isn't broken?) Every time I now exit Photoshop I get the message "Adobe QT Server has stoped working" and occasionally it happens when I exit bridge. Indesign is also behaving badly. I can no longer start a previous document from file manager without ID crashing out.
The other is the cursors in Clone and erase lose their edge (become invisable) for no reason - well not quite. Noise Ninja crashed Photoshop when I tried to use it. I reinstalled it and all is well. The cursor issue seems to be intermittant but came back (for no reason) after I reinstalled NN. I can't seem to change the cursor, no matter what I do. The problem is now seriously affecting how I work. Almost enough to go back to Win XP which ran CS5 Photoshop flawlessly.
Any help will be gratefully accepted.
Doug

function(){return A.apply(null,[this].concat($A(arguments)))}
doug87510 wrote:
The recent problem is the entire outline of the cursor (including the crosshair in the middle) was missing at any size of cursor. All I had was exactly what I'd get if I used a real spraygun.
Well, that issue is simply a matter of hitting the Caps Lock key. When Caps Lock is on, you'll see the cursor outline, and when it is off you'll see a crosshair. That's a feature, not a bug.
Glad to hear the 11.1 drivers are out. I will download them and try them now myself.
Regarding "Adobe QT" crashing... QT brings to mind QuickTime, though that is Apple, not Adobe. Do you have Apple QuickTime installed?
Regarding memory usage, with 12 GB of installed RAM, you should be able to set Photoshop to use 90% or more in Edit - Preferences - Performance.
-Noel

Issue in Creation of Periodicals for Contracts in CRM7.0

Hello,
I have a requirement to create Contracts in CRM7.0 system.
And I am doing this using the BAPI *BAPI_BUSPROCESSND_CREATEMULTI*
Good part is Contract Order gets created, but onlywith Header Details.
The issues i am facing --
1. I need to know what kind/type of data must be passed to the interface parameters, the F1 Help/Documentation is vague.
2. I am passing data in the INPUT FIELDS structure with the Object ID, Handle Number, Reference GUID and Fieldname,
here what does 'Logical Key' field indicate? What should be passed here.
What does 'REFERENCE KIND' field indicate, i have been passng 'A' for everything (to be frank i dont know whats its significance is!!).
3. With so much, My Order gets created but with less than half details, i.e. the Objects not getting created are - Partner, Product, terms/appointments, Status, LongTexts......
Any help/inputs would be appreciated.
Hope my problem is stated clearly ...
--Regards
Dedeepya

Hi Anu,
i found my solution by debugging with existing data or while creating it in CRMD_ORDER.
Ensure that you are passing a correct entry in INPUT_FIELDS structure.
As i haven't worked on rebates i woudlnt be able to help you, I suggest you debug to arrive at a solution.
You can preset your break-points at :-
1. FM - CRM_ORDER_MAINTAIN
2. CRM_ORDER_MAINTAIN_MULTI_OW -- Debug through the complete FM.
3. CRM_ORDER_PREPARE_MULTI_OW -- The data is set in this function module.
Regards
Dedeepya C

Issue in creation of plant related data at receiving server using BD10

Hi all,
This is regarding Material master creation using B10.I am using MATMAS05 message type for sending data from one system to another.Data is sent and received successfully.When i go in mm03 i can see all the views created successfully accept views related to PLANT.Please guide to resolve the issue.
When i entered into Log-
1)"The field MBEW-BKLAS is defined as a required field; it does not contain an entry".
2)"No material master data exists for material AB_08.04.09(30) in plant 4001".
My segemnt is as follows-
ZMATMAS05                      matmas05
       E1MARAM                        Master material general data (MARA)
           Z1KLART                        KLART----
My extention
           E1MARA1                        Additional Fields for E1MARAM
           E1MAKTM                        Master material short texts (MAKT)
           E1MARCM                        Master material C segment (MARC)
               Z1AUSPM                        E1AUSPMDistribution of Classification:----
My extention
               E1MARC1                        Additional Fields for E1MARCM
               E1MARDM                        Master material warehouse/batch segment (MARD)
               E1MFHMM                        Master material production resource/tool (MFHM)
               E1MPGDM                        Master material product group
               E1MPOPM                        Master material forecast parameter
               E1MPRWM                        Master material forecast value
               E1MVEGM                        Master material total consumption
               E1MVEUM                        Master material unplanned consumption
               E1MKALM                        Master material production version
           E1MARMM                        Master material units of measure (MARM)
           E1MBEWM                        Master material material valuation (MBEW)
           E1MLGNM                        Master material material data per warehouse number (MLGN)
           E1MVKEM                        Master material sales data (MVKE)
           E1MLANM                        Master material tax classification (MLAN)
           E1MTXHM                        Master material long text header
           E1CUCFG                        CU: Configuration data
       E1UPSLINK                      Reference from Object to Superior UPS
Thanks.
Edited by: sanu debu on Apr 27, 2009 7:10 PM

CREATE CONTROLFILE SET DATABASE "NEWDB" NORESETLOGS ARCHIVELOGAlso when you are setting a new database, the option should be RESETLOGS and not NORESETLOGS.
'D:\APP\ADMINISTRATOR\ORADATA\NEWDB\ONLINELOG\O1_MF_2_7FK0XKB8_.LOG
D:\APP\ADMINISTRATOR\ORADATA\NEWDB\DATAFILE\O1_MF_SYSTEM_7FK0SKN0_.DBFWhy underscore(_) at the end of the datafile name. Any specific reason ?

MB5T Issue

Similar Messages

Maybe you are looking for