MB90 print problem when using print preview

Dear Expert,
We have print problem using transaction code MB90.
After input data on transaction MB90 and then we choose print preview.
Output document will be displayed, then the problem occurs, print icon and print menu are grey out.
Please your advice.
Thanks and Regards

Hi,
Just to check, is the Printer configuration complete?
http://wiki.sdn.sap.com/wiki/display/Basis/HowtoConfigurePrinterin+SAP
http://help.sap.com/saphelp_nw70/helpdata/en/d9/4a971d51ea11d189570000e829fbbd/content.htm
http://basissap.blogspot.in/2008/06/how-can-you-configure-printer-explain.html
Regards,
Srikishan

Similar Messages

  • HP 1536 printing problem when using the charger

    On printer, scan HP 1536, when I print manualy the copy is perfect.But when I use the charger, I have two vertical lines on the copy.Somebody can help me to solve this problem.thank you in advance 

    Take a look at this link from HP. Take a good look at the ADF Glass strip for any foreign matter.

  • Printing problem when use multiple printers

    Hi to all,
    we are using printing through multiple printers in the network, after u start the machine if u use one printer it is ok, when the time u start printing with another printer the problems start like it starts from middle of the page or it prints half of the page then it leaves balnk remainig. etc. the printers \we are using are one is EPSON LX-300+ and another is HP Laser 1200. we are using orginal softwares suppliers by the prinnters.. Oracle reports developer6 is the reports.
    any one has got experice in this.
    Thanks in advance..

    Can you access page1 and page2.jsp correctly on their own?
    ie could the problem be with page2.jsp rather than the import command?

  • Printing problems when using automatic document feeder (HP Photosmart 309C)

    When I print using the normal paper trays, everything comes out fine.  However, when I feed a document through the automatic document feeder, it comes out with four vertical lines running down the page.  I have tried cleaning the rollers, but that has not worked.  Anyone have any ideas/solutions?  Thanks in advance, Jack.

    When I print using the normal paper trays, everything comes out fine.  However, when I feed a document through the automatic document feeder, it comes out with four vertical lines running down the page.  I have tried cleaning the rollers, but that has not worked. 
    I see that this post was made in June of 2010, but there was no reply. I found the solution elsewhere:
    Lift the scanner lid. You will see the main glass and a small glass about the width of a ruler. There are a couple of dots of debris on that small glass. Line up the lines to find them and clean with a bit of glass cleaner on a rag or napkin. The reason a small dot makes a line is the paper passes by the scanner with adf rather than the scanner passing by the paper on flatbed scans.

  • HT3500 I am using Mac 10.4.11 and I am having a problem when my printer wont print what I tell it too. Please Help

    I am using Mac 10.4.11 and I am having a problem when my printer wont print what I tell it too. Please Help!

    A warm welcome to Apple discussions!
    A 2003 iMac cannot support Snow Leopard 10.6; you'd need an Intel processor and that cannot be retrofitted to your Mac. What does "About this Mac" in your Apple menu say  for your processor speed? What does it say about how much RAM you have?
    If the processor is 1ghz or faster, you can run OS 10.5; otherwise, you are maxed out at 10.4.11.
    Also, are you running any commercial ("pay for") anti-virus or security software? They are notorious for slowing most Macs to a fraction of their speed potential.
    A too-full hard drive can drag down performance, especially if you don't have a lot of physical RAM installed. If you single-click your hard drive icon and then do command i, you'll see the disk usage. Looks like this:
    The value for "Used" should be no more than about 90 percent of "Capacity." In the example image, that drive has about 34 percent of its space used and 66 percent free--more than enough. Please post what you see for your Capacity and Used numbers
    There are a few more things we might check but this is a good start.
    Awaiting your information,
    Allan

  • Printing problem when PDF is sent to the printer with certain fonts - missing text

    I'm running into a printing problem when PDFs containing certain characters of the Calibri font are used.  The text in large sections of the PDF is missing on the paper version, but the text is there on the screen.  It's also happened when the PDFs we created were e-mailed out to a client and printed on their printer.  The problem is not present when printing directly from the programs (Microsoft Word, Excel, Visio, etc.).  I've been trying to get tech support from Adobe on this, but every time I call they apologize and say they will call back in 4-6 hours with an answer.  Same result each time, no call back.  If anyone from Adobe is listening, it's case number 184891587.  The font appears as an embedded subset when I look at the document properties.  Sometimes deleting one or two Characters allows for larger text blocks to be printed - i.e. removing a long dash in bold from the heading of a paragraph makes the paragraph reappear when printed to paper from PDF.  In all cases the PDF appears correct on the screen.  Printing as an image allows the text to appear, but the image quality isn't acceptable for small text, even at the 600 dpi setting on the printer.  If the PDF is sent out by e-mail, we do not have control over the end-user's printer setup anyway, so we need this to work in all cases.  
    The setup/process I'm using is as follows:
    Windows 7 Professional SP1 64-Bit
    Microsoft Office 2013 - problem is present when printing documents from Word, Excel or Visio.  Even other variations on documents. 
    I've tried Acrobat versions 11.0.0 to 11.0.5 as well as Acrobat Pro 11.0.0 and 11.0.1.  Same Result
    Printing to Adobe PDF as the printer, from the third party application
    Printing to a Xerox printer from PDF using Acrobat - Text missing
    Client prints to Konica printer - Text missing
    I print to the wide-format Ricoh (which also does 11x17) and the text is present. 
    Is there something I'm missing?  Is the entire font not getting embedded into the PDF file?  I noticed that rolling back to a much older version of the Calibri font (1.02 compared to 5.72) makes the problem mostly go away, but it's not completely gone.  Is it possible the font is too large to be completely embedded?  Where can I go from here? 

    Success!  At least for now.  It looks like my problem was fixed with Adobe's most recent update, 11.0.06.  From the release notes:
    PDF creation
    Added support for Lotus Notes 9.
    Added support for WebCapture in IE 11.
    Added support for conversions from AutoCAD 2013.
    3652540 A blank pdf is created for files having hidden visual style.
    3601108 Flow Chart converts as a multicolored square.
    3654345 Word documents missing parts of images in conversion to PDF.
    3654572 Temporary file size increases when creating pdf by combining multiple files into one PDF.
    3670155 PDF file created with Distiller XI prints incorrectly to some printers. (Emphasis mine)
    3599407 Checkbox check marks do not appear in these files.
    3663233 IE Web Capture in localized OS: Icons and drop-down menu items are missing and conversion dialog is not localized.
    3651931 Chrome Only: Few web pages when converted to pdf from Chrome plugin doesn’t show up the Save As dialog.
    3597910 EPM Mode On: Web capture is not working on Windows 8-32 bit when cache folder is missing.
    3610644 Firefox 23.0: With Firefox version 23.0 (latest), the WebCapture icon shows up very dim as if it is disabled.
    3650244 ODA falis to convert DWG files to PDF for large files.
    I don't know if that's definately what solved the problem, but it sure sounds similar and this is the update that made the printing problem go away.  We can't get the PDFs to fail at this point with our printers, even with Calibri 5.72.  I'll come back to thread if we have printing problems at the end-user locations. 

  • Disable print output when using bapi BAPI_GOODSMVT_CREATE

    Hello,
    I am using BAPI BAPI_GOODSMVT_CREATE to post material documents in our programs.
    I wish to prevent the print output of the documents created by the BAPI.
    Meaning - when the user post good movement using MIGO, there will be a printout of the movement, but if the movement is created using BAPI_GOODSMVT_CREATE, no output will be printed.
    I have tried sending blank values in fields VER_GR_GI_SLIP & VER_GR_GI_SLIPX in GOODSMVT_HEADER structure, but to no avail.
    Is there a way to disable printing ONLY when using the BAPI?
    Thank you very much.

    Hi,
    We cant restrict the print preview or print out of the material document. Once the condition record has maintianed for the material document, it ll applicable for all the material doc . It would be manual Gr or BAPI GR.
    In your case Print is coming automatically or user is taking the print !!
    Regards,
    Dhanush.

  • Cannot print anything when using safari

    Cannot print anything when using safari.  OSX is Mavericks.  Printer is Canon MP620.  Have downloaded Mavericks  software for printer, but still will not print.  I have also repaired the disk hoping that would solve the problem, but to no avail.  Can anyone help me please?

    Hey ivorfromborehamwood,
    Thanks for using Apple Support Communities.
    For more information, take a look at:
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/ts3147
    Delete the affected printer, then add the printer again.
    If the issue persists, try these additional steps:
    Reset the printing system, then add the printer again.
    If the issue still persists, reset the printing system again.  Download and install your printer's drivers. Then, add the printer again.
    Have a nice day,
    Mario

  • How can I show only text edits and not text formatting when using print comments summary?

    Acrobat 9.3.0 for Mac.
    Here is the scenario: I used the Compare command to see the changes between 2 PDFs. The resulting file some edits are inserts and some are deletions. I want to print a comments summary only showing the text edits. In the Compare Option pane, I select Text and deselect Images, Annotations, Formatting, Headers/Footers, and Backgrounds. Now on the screen I see inserts are highlighted in blue and deletions are marked with sort of a caret and vertical bar symbol. So all looks good at this point. However, when I show the Comments List, I see addtional comments that indicate "Replace - The following text attributes were changed: fill color." Those comments do not appear in the page view unless I check the Formatting check box to show them. With Formatting unchecked, I print a comments summary and all of the "Replace - Fill Color" comments" appear on the resulting comments summary.
    I only want to show text edits, not text formatting changes. So questions are:
    1. Why, when the Formatting checkbox is unchecked, do the text formatting comments still appear in the comments list when they do not appear on the page display.
    2. How can I print only the text content edits and not show the text formatting changes when using Print Comments Summary.

    Hi,
    You can set ExecuteWithParams as default activity in the task flow then method activity to return total no of rows passing to Router activity if your method has value 0 then call Create insert operation else do directly to page.
    Following idea could be your task flow
    Execute With param (default) > SetCurrentRowWithKey > GetTotalNoOfRows (VOImpl Method)
    |
    v
    Router
    1. If pageFlowScope outcome is 0 then call CreateInsert > MyPage
    2. if pageFlowScope outcome > 0 then MyPage
    hope it helps,
    Zeeshan

  • Can not print report when using HTML or DHTML

    Can not print report when using HTML or DHTML. When I open the report and click the print icon I get a small blank dialog box and then nothing. If I change to activex it works and I can print.
    Any Ideas?
    Thanks
    Jeff

    Hi,
    I did not come across this situation before. Did you apply any fix packs. Try to check whether its a issue which can be fixed by applying fix pack( try to check release notes of fix pack and see if they mentioned any thing about this).
    Thanks,
    SK.

  • HP Photosmart 8750 prints slow when using Photo Gray Cartidge

    HP Photosmart 8750 prints slow when using Photo Gray Cartidge ... sometimes indicates Black Cartridge failed, however upon reinserting works slow

    Welcome to the HP Forums ButchG,
    I see by your post that when printing with the photo gray cartridge the black cartridge will indicate that it has failed.
    I can help you with this issue.
    I would do a power reset to see if that will resolve the issue.
    With the printer still turned on, disconnect the power cable from the back of the printer, if the printer has external power module with a detachable power cord disconnect it for 15 seconds and then reconnect it.
    Hold down the power button for 10 seconds to drain the power.
    Then disconnect the power cable from the wall outlet.
    Wait 10 seconds and reconnect the power cable back to the wall outlet first, then the back of the printer and power it on again.
    Make sure the printer is connected directly to wall outlet. (don't use a power hub or a surge protector)
    I have provided a document for the cleaning the contacts and reseating the cartridge.
    'Cartridge Failed' or 'Cartridge Not Compatible' Error Message.
    What are the ink levels?
    Are you using Genuine HP Cartridges?
    Check the date on the cartridges to make sure they are still in warranty. (not old stock)
    If you need further assistance, let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • FBL3N : i have a problem when i print a report

    Hi Gurus,
    I have a problem when i print a report from Tcode : FBL3N
    - i didn't have the last line of the report
    - i have two pages : i want just one because it is a small report
    I choosed this Format : X_65_200
    Please help me to solve these issues.
    Thanks.

    Try to choose a layout that has 65 lines.
    If the report is too wide you might change the line layout (take out columns you do not need) until it is ok to print on 1 page.
    Regards
    Hein
    P.S. assign points if useful

  • When using printer Epson R1900 with Aperture 3 and if I mistakenly choose the wrong paper such as, epson's luster instead of glossy, does that change the exposure? Like make it too dark one or two stops!

    When using printer Epson R1900 with Aperture 3 and if I mistakenly choose the wrong paper such as, epson's luster instead of glossy, does that change the exposure? Like make it too dark one or two stops!

    Hi,
       If you choose the incorrect settings for printing, yes - the print quality will be affected.
    Different papers absorb the ink differently, so you can end up with prints that are too light, too dark, or have a colour cast if you make incorrect choices in your Aperture or printer settings.

  • HAVING A PROBLEM WHEN I PRINT A WEB PAGE WHICH IS MORE THAT ONE PAGE LONG. ONLY THE FIRST PAGE PRINTS TO SCALE...THE REMAINING PAGES PRINT OFF THE PAGE????HELP-IT IS DEFINITELY A PROBLEM WITH FIREFOX BECAUSE IT DOES NOT HAPPEN WITH SAFARI???

    Question
    HAVING A PROBLEM WHEN I PRINT A WEB PAGE WHICH IS MORE THAT ONE PAGE LONG. ONLY THE FIRST PAGE PRINTS TO SCALE...THE REMAINING PAGES PRINT OFF THE PAGE????HELP-IT IS DEFINITELY A PROBLEM WITH FIREFOX BECAUSE IT DOES NOT HAPPEN WITH SAFARI??

    Thank you for the response. I tried to fix the problem with some of the suggestions on that page, but none seem to work. I believe that is the only website that I'm having that problem on. I got to fooling with it a bit more and when I highlight the whole page and select to print the selected area, it actually prints the whole page then, but it won't do it as a default. I guess I can just do it like that from now on, but I thought there would be something in the settings that I could have changed. Thanks again for the help.

  • Using smart previews on iMac to control two sets of identical original files on two external drives --- render previews setting when using smart previews

    I’m just getting started with Lightroom and if someone can help me I’ll be very appreciative.
    I’m using an iMac with a 1TB drive and two external 2.5 TB drives for backup.  My active files are on all three drives and I’m running out of room on the iMac drive.
    With the smart previews capability of Lightroom 5, I’m hoping to remove all the active files from the iMac drive.  I hope to import existing images into the LR catalog from two identical drives with identical folders and have both sets of images reflect the changes I make using smart previews on my iMac.
    I just created two identical test folders of junk images on the external drives and was following a beginners tutorial on importing. However, I see nothing about using smart previews on my iMac that, when connected, will update more than one external drive at the same time.
    I’m also wondering if, when using smart previews, it matters how I set the render previews during the import process.
    Many thanks for any help,
    Karl Hentz

    I don't see any way to use smart previews to update both external drives at the same time. The smart previews are linked to a specific set of images. But it seems to me that if both drives are in fact identical, once the catalog is updated when one of those drives is connected those changes should also apply to the files on the other drive. It's actually the catalog that gets updated, not the images.  Smart previews and regular import previews are completely unrelated. How you have your import previews configured will have no effect on your smart previews.
    Incidentally, in order for my suggestion to work it would be necessary to only have one of those external drives connected. And when the other EHD is connected it would have to have the same drive letter or name. In other words it would have to appear to the iMac that it is precisely the same drive.

Maybe you are looking for