MBA (2010) & Dual Monitors

I have a 2010 model MBA with the 2.13 GHz Intel Core Duo and the NVIDIA GeForce 320M 256 MB graphics, a 30" HP LP3065 display and a 24" Apple cinema display, and corresponding Apple mini DisplayPort to DVI adapters (dual and single link respectively).
The MBA + adapters work great with either display separately, but I'd really like to know if there's a way I can get both monitors working simultaneously (with the MBA closed with the internal display off). Is there such thing as a mini DisplayPort splitter, or perhaps I can daisy chain them somehow? TIA.

Similar Messages

Windows 7 MBA (2010) + External Monitor

I am doing tech support for a family member's late 2010 13" MBA. He is running Windows 7 32 bit and an external Dell monitor is not working. Works fine in 10.6.7.
He is running Bootcamp v3.0. Any tips to get monitor support under W7?

Just checked, he is actually running Bootcamp 3.2

Dual Monitor Setup/Home Network/Sync--11" MBA & 21.5" iMac via Thuderbolt cable?

11" MBA & 21.5" iMac both purchased in August 2011 running Lion
Is it possible to setup my MBA & iMac where they will sync? I have them connected via thinderbolt and want to be able to connect when I get home and sync all my folders [notes, cases, papers, etc...]?
If this is not possible is there a way to transfer files between my two machines using the Thunderbolt cable? I ask because even though my MBA has a Thunderbolt port, there is not "Fire Wire" option under "System Preferences →Network" like there is on my iMac?
In a perfect world I want to be able to hook up my MBA & iMac via Thunderbolt cable, have them both controlled by my Magic Mouse & Keyboard I use with my iMac as dual monitors and be able to transfer files back and forth freely. I understand this may be a lot to ask but thought I should throw it out there just in case there was a way and I was not doing something right.
I appreciate all the help by everyone in the Apple Commun ity

OK great info!
I found 2 possible ethernet to USB adapters:
By "Plugable": USB 2.0 to ethernet LAN wired network adapter - seems this will work, but I'll contact Plugable.
2. Apple USB Ethernet Adapter
Easily connect your MacBook Air computer to an Ethernet network with the Apple USB Ethernet Adapter. Small and light, it connects to the USB 2.0 port of your MacBook Air and provides an RJ-45 connector that supports 10/100BASE-T performance. BUT NOT SURE IF THIS WILL WORK ON ANYTHING BUT a MacBook Air…
One person commented:
This little gem used to be the device of choice for adding a second Ethernet interface to a Mac Mini Server and I'd been using one that way for about a year. After doing a software update to 10.6.6 it stopped working. Forewarned is forearmed – it appears that Apple is finally enforcing the MacBook Air system requirement.
Thanks for any additional comments.
Best regards,
Steve Schulte
Sunday 6 January 2013

Dual monitor setup MBA 2013

Hello Everyone,
This is my first post on the Apple Support Community.
Nice to meet al of you!
System information:
Macbook Air medio 2013
Model MacBookAir6,2
Intel Core i7 1,7GHZ
8GB
512GB SSD
I am wondering if it is possible to have a dual monitor setup using the thunderbolt feature daisy-chain.
The configuration i am looking for is:
MBA --> Belkin Thunderbolt™ Express Dock (for using gigabit ethernet) --> Dell U2414H --> Dell U2414H
Specs:
Belkin Thunderbolt™ Express Dock = http://www.belkin.com/us/p/P-F4U055/
Dell U2414H = http://accessories.us.dell.com/sna/productdetail.aspx?c=us&cs=04&l=en&sku=860-BB CG
Do i have a chance this could work?
I'm looking forward to hearing from you all.
Thanks!
Kind regards,
Njamo187

Hello,
I had the same problem with a nVidia GT120 card (2009 Mac Pro standard). OSX wouldn't show the gray screen on the 3090, even when it was connected alone (to the DVI port). Also, the login screen would always revert to the secondary display (connected thru the mini display port to DVI adapter).
After login, all was well.
Now I've solved the problem with an nVidia GTX 285 card. The 3090 is connected to the n.1 DVI port and the secondary display (a 1600x1200 Eizo L997) to the n.2 DVI port, and the Mac Pro boots correctly on the 3090 (gray screen and everything, at full 2560x1600 resolution).
Note that the first time I booted up the Mac after replacing the GT120 with the GTX 285 I had the same problem, and solved it by disconnecting the secondary display and then rebooting with the 3090 alone. Now everything works as it should.
Dont't know if there is a bug somewhere (EFI, maybe) of if the GT120 and your ATI are simply unable to work at full resolution before OSX desktop loading.

Which dual monitor for iMac 21.5" 2010?

Hey guys,
I've had my iMac 21.5" 2010 model for a while now, but now I would like another monitor.
It must be:
-Around 21.5"
-Preffibly LED back lit
-Black and/or aluminium
-Connect to my iMac
Do any of you have any suggestions for good dual monitors. Currently I'm not looking at the Cinema displays.

Back in the mid 90s I had a 17" display that I thought was heaven but as DTP and graphics software became more powerful I decided I needed a second display but when I went looking I found my display had been discontinued. The second display was also 17" but it was about 5 inches taller. I liked it better but I found it disconcerting that they weren't vertically aligned. A couple old college text books solved the problem.
More recently I received a nice HD LCD display from my wife when she upgraded and it was maybe an inch shorter than my iMac. That didn't bother me at all. The display itself is 2" larger than my iMac and that didn't bother me either. I sometimes connect my notebook to the LCD and then the size difference does bother me so I only use mirroring with the notebook.
If the height difference bugs you, cheap out with a few books or go the classier route with a little shelf to raise the LCD. Or, find a display that has an adjustable height.

Is there a way to run dual monitors using a mini display port cable?

I want to connect my 21.5-inch, Mid 2010 iMac to my 13-inch, Mid 2010 MacBook Pro and run dual monitors with the cable because they don't have thunderbolt plugs. I wan't to use two displays for Logic Pro to expand my real estate. I'm not looking to spend over $50 on crazy adapters so cheaper options would be great.
Thanks

Upto 1920*12000...
http://eshop.macsales.com/item/Newer%20Technology/VIDU3HDMIDV/

Dual Monitor Startup Problem on MacPro - Solved

I have a model 53135LL/A = mid 2010 MacPro with 8 cores, DUAL monitor cards and monitors, 24GB memory, running Lion 10.7.3. It is important to note that I am also using the Apple bluetooth Magic Mouse and the smaller, bluetooth keyboard (no numeric keypad). This unit was supplied with Lion in December 2011 and has had a startup problem from the beginning as follows:
1 - when starting from a cold start the dual monitor positions are reversed from the correct position
2 - additionally the USB and firewire connected devices (e.g. Wacom tablet, 2 card readers) do not function properly.
The workaround for me has been to start the system, wait for the logon screen, then click restart. Upon restart everything comes up and functions correctly.
Specifics on my setup and starting problems:
1 - My main monitor (Monitor #2) is a large gamut monitor that is located to the right. This monitor is connected to card slot 1 as that is the faster card slot (pcx16). The second monitor (Monitor #1) is an ordinary unit and connected to card slot 2 (pcx4). The monitors are set up as an extended desktop.
2. The Wacom tablet (Intuous 3 wide) is connected to USB port on rear of machine. CF card reader by Delkin is connected to Firewire on rear of machine, and an SD card reader is connected to USB on the rear of the machine.
3. My dock is positioned on the left side of the left monitor. The menu bar is along the top of the left monitor, and all desktop icons are on the left monitor. The right monitor has no items on it.
On a typical cold start, as mentioned above, the apple logo appears on the right and then the logon screen appears on the right.
If I proceed to logon at that point, all the desktop items move to the right monitor and the computer thinks the positions are reversed. In other words, it behaves as though the right monitor (#2) is on the left of the desktop and left monitor (#1) is on the right.
Additionally, the Wacom tablet using either pen or mouse does not map over the full desktop range. If I use either card reader and then eject the card, no further card insertions will be recognized.
To fix this, I simply restart the machine thru the apple menu and everything comes up correctly.
I had discovered, that instead of completing the logon on a bad cold start, I could simply restart from the logon screen and all would work correctly.
On occasion, the logon screen would come up on the left monitor (as it should do) and in that case, if I log on all works correctly.
I have worked with Apple support on the phone, clearing setup ram etc. Have had the unit in to Apple store for hardware check, all OK. Next suggestion was reload OS and start over - no thanks.
SO - Here is the latest.
If I turn off my keyboard and mouse before starting the machine, then wait for the logon screen to appear - It starts correctly, with the logon screen on the left. I can then turn on my keyboard and mouse and all works as it should.
Bottom line - there appears to be a startup issue with Bluetooth devices from a cold start. Note that once the machine has been used for a bit, I can turn it off for short periods of time (e.g. 30 minutes) and it will start correctly even with the mouse and keyboard turned on.

mkaito wrote:
That's how dwm behaves. I believe dwm's multihead support is rather lackluster out of the box. You might want to check out some of the patches they have, and ask around in the dwm hackers thread.
I currently have dwm simply draw status on all monitors, but I'm investigating separate status bars per monitor. We'll see where that takes me. Dwm is a tinker's WM!
i found the patch , thanks!

Video playback--mba 2010 w/mountain lion

Has anyone noticed terrible video playback on 13" 4Gb mba 2010 with the mountain lion upgrade? Youtube using flash (11.4.402.265) at 1080p is unwatchable and 720p is barely watchable at full screen. Connecting to a larger monitor is much worse. I could do all 3 when I had Lion. I'm not running any other applications at the time and used the app Free Memory to clear the RAM cache before playing a video. I've tried firefox, chrome, and safari (which I prefer), and they all had similarly poor results. I previously used html5 on lion, but those gave me choppy results and found flash to be better. Any suggestions?

I tried unchecking "enable hardware acceleration", but the results were similarly poor in safari 6 and chrome. However, while using safari 6 on youtube, I opted for the trial html5 setting and it now plays 1080p smoothly at full screen. Hopefully, this might helps others struggling with the mba 2010 processor.

[SOLVED] Trying to get dual monitor Xrandr to run on startup

I found several posts with trying to get an Xrandr script on startup but their solution doesn't seem to work.
Running Arch + XFCE + SLiM with ati open source drivers
when running xrandr --output HDMI-0 --right-of DVI-1 in terminal my dual monitor setup works fine
so I add it to my /home/username/.xinitrc which looks like
xrandr --output HDMI-0 --right-of DVI-1
exec ck-launch-session startxfce4
but there is the same ol' mirrored desktops? Any suggestions?
Last edited by PumpkinJack (2011-08-16 02:12:17)

It could also be me overlooking some stupid simple detail too. I haven't had any issues with gnome or kde but granted I could use the actual gui
to change it. Weird thing is when I installed xfce a couple days ago I swear it had a gui to enable what I need because also it WAS working 2 days ago o_O
but heres the log:
[ 2985.229]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 2985.239]
X.Org X Server 1.10.3.901 (1.10.4 RC 1)
Release Date: 2011-07-29
[ 2985.244] X Protocol Version 11, Revision 0
[ 2985.245] Build Operating System: Linux 3.0.0-ARCH x86_64
[ 2985.247] Current Operating System: Linux sfx 3.0-ARCH #1 SMP PREEMPT Sat Aug 6 16:18:35 CEST 2011 x86_64
[ 2985.249] Kernel command line: root=/dev/disk/by-uuid/8b947b8e-d3af-467a-ac97-057e0e474832 ro
[ 2985.250] Build Date: 08 August 2011 08:24:13AM
[ 2985.252]
[ 2985.254] Current version of pixman: 0.22.2
[ 2985.255] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2985.259] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2985.264] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 15 14:19:05 2011
[ 2985.265] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2985.267] (==) No Layout section. Using the first Screen section.
[ 2985.267] (==) No screen section available. Using defaults.
[ 2985.267] (**) |-->Screen "Default Screen Section" (0)
[ 2985.267] (**) | |-->Monitor "<default monitor>"
[ 2985.267] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 2985.267] (**) | |-->Device "mycard"
[ 2985.267] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 2985.267] (==) Automatically adding devices
[ 2985.267] (==) Automatically enabling devices
[ 2985.267] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2985.267] Entry deleted from font path.
[ 2985.267] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 2985.267] Entry deleted from font path.
[ 2985.267] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 2985.267] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2985.267] Entry deleted from font path.
[ 2985.267] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2985.267] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 2985.267] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2985.267] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2985.267] (II) Loader magic: 0x7d3620
[ 2985.267] (II) Module ABI versions:
[ 2985.267] X.Org ANSI C Emulation: 0.4
[ 2985.267] X.Org Video Driver: 10.0
[ 2985.267] X.Org XInput driver : 12.2
[ 2985.267] X.Org Server Extension : 5.0
[ 2985.268] (--) PCI:*(0:3:0:0) 1002:6738:1682:3100 rev 0, Mem @ 0xd0000000/268435456, 0xfbcc0000/131072, I/O @ 0x0000c000/256, BIOS @ 0x????????/131072
[ 2985.268] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2985.268] (II) LoadModule: "extmod"
[ 2985.269] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 2985.269] (II) Module extmod: vendor="X.Org Foundation"
[ 2985.269] compiled for 1.10.3.901, module version = 1.0.0
[ 2985.269] Module class: X.Org Server Extension
[ 2985.269] ABI class: X.Org Server Extension, version 5.0
[ 2985.269] (II) Loading extension MIT-SCREEN-SAVER
[ 2985.269] (II) Loading extension XFree86-VidModeExtension
[ 2985.269] (II) Loading extension XFree86-DGA
[ 2985.269] (II) Loading extension DPMS
[ 2985.269] (II) Loading extension XVideo
[ 2985.269] (II) Loading extension XVideo-MotionCompensation
[ 2985.269] (II) Loading extension X-Resource
[ 2985.269] (II) LoadModule: "dbe"
[ 2985.269] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 2985.269] (II) Module dbe: vendor="X.Org Foundation"
[ 2985.269] compiled for 1.10.3.901, module version = 1.0.0
[ 2985.269] Module class: X.Org Server Extension
[ 2985.269] ABI class: X.Org Server Extension, version 5.0
[ 2985.269] (II) Loading extension DOUBLE-BUFFER
[ 2985.269] (II) LoadModule: "glx"
[ 2985.269] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2985.269] (II) Module glx: vendor="X.Org Foundation"
[ 2985.269] compiled for 1.10.3.901, module version = 1.0.0
[ 2985.269] ABI class: X.Org Server Extension, version 5.0
[ 2985.269] (==) AIGLX enabled
[ 2985.269] (II) Loading extension GLX
[ 2985.269] (II) LoadModule: "record"
[ 2985.269] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 2985.269] (II) Module record: vendor="X.Org Foundation"
[ 2985.269] compiled for 1.10.3.901, module version = 1.13.0
[ 2985.269] Module class: X.Org Server Extension
[ 2985.269] ABI class: X.Org Server Extension, version 5.0
[ 2985.269] (II) Loading extension RECORD
[ 2985.269] (II) LoadModule: "dri"
[ 2985.269] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 2985.269] (II) Module dri: vendor="X.Org Foundation"
[ 2985.269] compiled for 1.10.3.901, module version = 1.0.0
[ 2985.269] ABI class: X.Org Server Extension, version 5.0
[ 2985.269] (II) Loading extension XFree86-DRI
[ 2985.269] (II) LoadModule: "dri2"
[ 2985.269] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 2985.270] (II) Module dri2: vendor="X.Org Foundation"
[ 2985.270] compiled for 1.10.3.901, module version = 1.2.0
[ 2985.270] ABI class: X.Org Server Extension, version 5.0
[ 2985.270] (II) Loading extension DRI2
[ 2985.270] (II) LoadModule: "radeon"
[ 2985.270] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 2985.270] (II) Module radeon: vendor="X.Org Foundation"
[ 2985.270] compiled for 1.10.1, module version = 6.14.2
[ 2985.270] Module class: X.Org Video Driver
[ 2985.270] ABI class: X.Org Video Driver, version 10.0
[ 2985.270] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, ATI Radeon HD 4200, ATI Radeon 4100,
ATI Mobility Radeon HD 4200, ATI Mobility Radeon 4100,
ATI Radeon HD 4290, ATI Radeon HD 4250, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, AMD Radeon HD 6900 Series,
AMD Radeon HD 6900 Series, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS
[ 2985.272] (--) using VT number 8
[ 2985.277] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 2985.277] (II) [KMS] Kernel modesetting enabled.
[ 2985.277] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 2985.277] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 2985.277] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 2985.277] (==) RADEON(0): Default visual is TrueColor
[ 2985.277] (==) RADEON(0): RGB weight 888
[ 2985.277] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 2985.277] (--) RADEON(0): Chipset: "AMD Radeon HD 6800 Series" (ChipID = 0x6738)
[ 2985.277] (II) RADEON(0): PCIE card detected
[ 2985.277] drmOpenDevice: node name is /dev/dri/card0
[ 2985.277] drmOpenDevice: open result is 8, (OK)
[ 2985.277] drmOpenByBusid: Searching for BusID pci:0000:03:00.0
[ 2985.277] drmOpenDevice: node name is /dev/dri/card0
[ 2985.277] drmOpenDevice: open result is 8, (OK)
[ 2985.277] drmOpenByBusid: drmOpenMinor returns 8
[ 2985.277] drmOpenByBusid: drmGetBusid reports pci:0000:03:00.0
[ 2985.277] (II) Loading sub module "exa"
[ 2985.277] (II) LoadModule: "exa"
[ 2985.277] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 2985.277] (II) Module exa: vendor="X.Org Foundation"
[ 2985.277] compiled for 1.10.3.901, module version = 2.5.0
[ 2985.277] ABI class: X.Org Video Driver, version 10.0
[ 2985.277] (II) RADEON(0): KMS Color Tiling: disabled
[ 2985.277] (II) RADEON(0): KMS Pageflipping: enabled
[ 2985.277] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 2985.296] (II) RADEON(0): Output DisplayPort-0 has no monitor section
[ 2985.316] (II) RADEON(0): Output DisplayPort-1 has no monitor section
[ 2985.422] (II) RADEON(0): Output HDMI-0 using monitor section bar
[ 2985.422] (**) RADEON(0): Option "RightOf" "foo"
[ 2985.426] (II) RADEON(0): Output DVI-0 has no monitor section
[ 2985.532] (II) RADEON(0): Output DVI-1 using monitor section foo
[ 2985.543] (II) RADEON(0): EDID for output DisplayPort-0
[ 2985.556] (II) RADEON(0): EDID for output DisplayPort-1
[ 2985.662] (II) RADEON(0): EDID for output HDMI-0
[ 2985.662] (II) RADEON(0): Manufacturer: ACI Model: 27f6 Serial#: 77821
[ 2985.662] (II) RADEON(0): Year: 2010 Week: 34
[ 2985.662] (II) RADEON(0): EDID Version: 1.3
[ 2985.662] (II) RADEON(0): Digital Display Input
[ 2985.662] (II) RADEON(0): Max Image Size [cm]: horiz.: 60 vert.: 34
[ 2985.662] (II) RADEON(0): Gamma: 2.20
[ 2985.662] (II) RADEON(0): DPMS capabilities: Off
[ 2985.662] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 2985.662] (II) RADEON(0): First detailed timing is preferred mode
[ 2985.662] (II) RADEON(0): redX: 0.647 redY: 0.334 greenX: 0.284 greenY: 0.607
[ 2985.662] (II) RADEON(0): blueX: 0.151 blueY: 0.071 whiteX: 0.313 whiteY: 0.329
[ 2985.662] (II) RADEON(0): Supported established timings:
[ 2985.662] (II) RADEON(0): 720x400@70Hz
[ 2985.662] (II) RADEON(0): 640x480@60Hz
[ 2985.662] (II) RADEON(0): 640x480@67Hz
[ 2985.662] (II) RADEON(0): 640x480@75Hz
[ 2985.662] (II) RADEON(0): 800x600@56Hz
[ 2985.662] (II) RADEON(0): 800x600@60Hz
[ 2985.662] (II) RADEON(0): 800x600@72Hz
[ 2985.662] (II) RADEON(0): 800x600@75Hz
[ 2985.662] (II) RADEON(0): 832x624@75Hz
[ 2985.662] (II) RADEON(0): 1024x768@60Hz
[ 2985.662] (II) RADEON(0): 1024x768@70Hz
[ 2985.662] (II) RADEON(0): 1024x768@75Hz
[ 2985.662] (II) RADEON(0): 1280x1024@75Hz
[ 2985.662] (II) RADEON(0): Manufacturer's mask: 0
[ 2985.662] (II) RADEON(0): Supported standard timings:
[ 2985.662] (II) RADEON(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 2985.662] (II) RADEON(0): #1: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 2985.662] (II) RADEON(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 2985.662] (II) RADEON(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 2985.662] (II) RADEON(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 2985.662] (II) RADEON(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 2985.662] (II) RADEON(0): #6: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 2985.662] (II) RADEON(0): Supported detailed timing:
[ 2985.662] (II) RADEON(0): clock: 148.5 MHz Image Size: 598 x 336 mm
[ 2985.662] (II) RADEON(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 2985.662] (II) RADEON(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 2985.662] (II) RADEON(0): Serial No: A8LMTF077821
[ 2985.662] (II) RADEON(0): Ranges: V min: 50 V max: 85 Hz, H min: 24 H max: 92 kHz, PixClock max 175 MHz
[ 2985.662] (II) RADEON(0): Monitor name: ASUS VE278
[ 2985.662] (II) RADEON(0): Supported detailed timing:
[ 2985.662] (II) RADEON(0): clock: 27.0 MHz Image Size: 521 x 293 mm
[ 2985.662] (II) RADEON(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 2985.662] (II) RADEON(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 2985.662] (II) RADEON(0): Supported detailed timing:
[ 2985.662] (II) RADEON(0): clock: 74.2 MHz Image Size: 521 x 293 mm
[ 2985.663] (II) RADEON(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 2985.663] (II) RADEON(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 2985.663] (II) RADEON(0): Supported detailed timing:
[ 2985.663] (II) RADEON(0): clock: 74.2 MHz Image Size: 521 x 293 mm
[ 2985.663] (II) RADEON(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
[ 2985.663] (II) RADEON(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 2985.663] (II) RADEON(0): Supported detailed timing:
[ 2985.663] (II) RADEON(0): clock: 27.0 MHz Image Size: 521 x 293 mm
[ 2985.663] (II) RADEON(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0
[ 2985.663] (II) RADEON(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0
[ 2985.663] (II) RADEON(0): Number of EDID sections to follow: 1
[ 2985.663] (II) RADEON(0): EDID (in hex):
[ 2985.663] (II) RADEON(0): 00ffffffffffff000469f627fd2f0100
[ 2985.663] (II) RADEON(0): 22140103803c22782aeed5a555489b26
[ 2985.663] (II) RADEON(0): 125054b7ef00714f81c0814081809500
[ 2985.663] (II) RADEON(0): b300d1c00101023a801871382d40582c
[ 2985.663] (II) RADEON(0): 450056502100001e000000ff0041384c
[ 2985.663] (II) RADEON(0): 4d54463037373832310a000000fd0032
[ 2985.663] (II) RADEON(0): 55185c11000a202020202020000000fc
[ 2985.663] (II) RADEON(0): 00415355532056453237380a2020019d
[ 2985.663] (II) RADEON(0): 020322714f0102031112130414050e0f
[ 2985.663] (II) RADEON(0): 1d1e1f10230907018301000065030c00
[ 2985.663] (II) RADEON(0): 10008c0ad08a20e02d10103e96000925
[ 2985.663] (II) RADEON(0): 21000018011d007251d01e206e285500
[ 2985.663] (II) RADEON(0): 09252100001e011d00bc52d01e20b828
[ 2985.663] (II) RADEON(0): 554009252100001e8c0ad09020403120
[ 2985.663] (II) RADEON(0): 0c405500092521000018000000000000
[ 2985.663] (II) RADEON(0): 00000000000000000000000000000073
[ 2985.663] (II) RADEON(0): Printing probed modes for output HDMI-0
[ 2985.663] (II) RADEON(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 2985.663] (II) RADEON(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 2985.663] (II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 2985.663] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 2985.663] (II) RADEON(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 2985.663] (II) RADEON(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 2985.663] (II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 2985.663] (II) RADEON(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 2985.663] (II) RADEON(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[ 2985.663] (II) RADEON(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 2985.663] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 2985.663] (II) RADEON(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 2985.663] (II) RADEON(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 2985.663] (II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 2985.663] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 2985.663] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 2985.663] (II) RADEON(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz)
[ 2985.663] (II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 2985.663] (II) RADEON(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 2985.663] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 2985.663] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 2985.667] (II) RADEON(0): EDID for output DVI-0
[ 2985.773] (II) RADEON(0): EDID for output DVI-1
[ 2985.773] (II) RADEON(0): Manufacturer: ACI Model: 27f6 Serial#: 77822
[ 2985.773] (II) RADEON(0): Year: 2010 Week: 34
[ 2985.773] (II) RADEON(0): EDID Version: 1.3
[ 2985.773] (II) RADEON(0): Digital Display Input
[ 2985.773] (II) RADEON(0): Max Image Size [cm]: horiz.: 60 vert.: 34
[ 2985.773] (II) RADEON(0): Gamma: 2.20
[ 2985.773] (II) RADEON(0): DPMS capabilities: Off
[ 2985.773] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 2985.773] (II) RADEON(0): First detailed timing is preferred mode
[ 2985.773] (II) RADEON(0): redX: 0.647 redY: 0.334 greenX: 0.284 greenY: 0.607
[ 2985.773] (II) RADEON(0): blueX: 0.151 blueY: 0.071 whiteX: 0.313 whiteY: 0.329
[ 2985.773] (II) RADEON(0): Supported established timings:
[ 2985.773] (II) RADEON(0): 720x400@70Hz
[ 2985.773] (II) RADEON(0): 640x480@60Hz
[ 2985.773] (II) RADEON(0): 640x480@67Hz
[ 2985.773] (II) RADEON(0): 640x480@75Hz
[ 2985.773] (II) RADEON(0): 800x600@56Hz
[ 2985.773] (II) RADEON(0): 800x600@60Hz
[ 2985.773] (II) RADEON(0): 800x600@72Hz
[ 2985.773] (II) RADEON(0): 800x600@75Hz
[ 2985.773] (II) RADEON(0): 832x624@75Hz
[ 2985.773] (II) RADEON(0): 1024x768@60Hz
[ 2985.773] (II) RADEON(0): 1024x768@70Hz
[ 2985.773] (II) RADEON(0): 1024x768@75Hz
[ 2985.773] (II) RADEON(0): 1280x1024@75Hz
[ 2985.773] (II) RADEON(0): Manufacturer's mask: 0
[ 2985.773] (II) RADEON(0): Supported standard timings:
[ 2985.773] (II) RADEON(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 2985.773] (II) RADEON(0): #1: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 2985.773] (II) RADEON(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 2985.773] (II) RADEON(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 2985.773] (II) RADEON(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 2985.773] (II) RADEON(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 2985.773] (II) RADEON(0): #6: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 2985.773] (II) RADEON(0): Supported detailed timing:
[ 2985.773] (II) RADEON(0): clock: 148.5 MHz Image Size: 598 x 336 mm
[ 2985.773] (II) RADEON(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 2985.773] (II) RADEON(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 2985.773] (II) RADEON(0): Serial No: A8LMTF077822
[ 2985.773] (II) RADEON(0): Ranges: V min: 50 V max: 85 Hz, H min: 24 H max: 92 kHz, PixClock max 175 MHz
[ 2985.773] (II) RADEON(0): Monitor name: ASUS VE278
[ 2985.773] (II) RADEON(0): Supported detailed timing:
[ 2985.773] (II) RADEON(0): clock: 27.0 MHz Image Size: 521 x 293 mm
[ 2985.773] (II) RADEON(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 2985.773] (II) RADEON(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 2985.773] (II) RADEON(0): Supported detailed timing:
[ 2985.773] (II) RADEON(0): clock: 74.2 MHz Image Size: 521 x 293 mm
[ 2985.773] (II) RADEON(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 2985.773] (II) RADEON(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 2985.773] (II) RADEON(0): Supported detailed timing:
[ 2985.773] (II) RADEON(0): clock: 74.2 MHz Image Size: 521 x 293 mm
[ 2985.773] (II) RADEON(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
[ 2985.773] (II) RADEON(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 2985.773] (II) RADEON(0): Supported detailed timing:
[ 2985.773] (II) RADEON(0): clock: 27.0 MHz Image Size: 521 x 293 mm
[ 2985.773] (II) RADEON(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0
[ 2985.773] (II) RADEON(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0
[ 2985.773] (II) RADEON(0): Number of EDID sections to follow: 1
[ 2985.773] (II) RADEON(0): EDID (in hex):
[ 2985.773] (II) RADEON(0): 00ffffffffffff000469f627fe2f0100
[ 2985.773] (II) RADEON(0): 22140103803c22782aeed5a555489b26
[ 2985.773] (II) RADEON(0): 125054b7ef00714f81c0814081809500
[ 2985.773] (II) RADEON(0): b300d1c00101023a801871382d40582c
[ 2985.773] (II) RADEON(0): 450056502100001e000000ff0041384c
[ 2985.773] (II) RADEON(0): 4d54463037373832320a000000fd0032
[ 2985.773] (II) RADEON(0): 55185c11000a202020202020000000fc
[ 2985.773] (II) RADEON(0): 00415355532056453237380a2020019b
[ 2985.773] (II) RADEON(0): 020322714f0102031112130414050e0f
[ 2985.773] (II) RADEON(0): 1d1e1f10230907018301000065030c00
[ 2985.773] (II) RADEON(0): 10008c0ad08a20e02d10103e96000925
[ 2985.773] (II) RADEON(0): 21000018011d007251d01e206e285500
[ 2985.773] (II) RADEON(0): 09252100001e011d00bc52d01e20b828
[ 2985.773] (II) RADEON(0): 554009252100001e8c0ad09020403120
[ 2985.773] (II) RADEON(0): 0c405500092521000018000000000000
[ 2985.773] (II) RADEON(0): 00000000000000000000000000000073
[ 2985.773] (II) RADEON(0): Printing probed modes for output DVI-1
[ 2985.773] (II) RADEON(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 2985.773] (II) RADEON(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 2985.773] (II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 2985.773] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 2985.773] (II) RADEON(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 2985.773] (II) RADEON(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 2985.773] (II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 2985.773] (II) RADEON(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 2985.773] (II) RADEON(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[ 2985.773] (II) RADEON(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 2985.773] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 2985.773] (II) RADEON(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 2985.773] (II) RADEON(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 2985.773] (II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 2985.773] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 2985.773] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 2985.774] (II) RADEON(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz)
[ 2985.774] (II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 2985.774] (II) RADEON(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 2985.774] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 2985.774] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 2985.774] (II) RADEON(0): Output DisplayPort-0 disconnected
[ 2985.774] (II) RADEON(0): Output DisplayPort-1 disconnected
[ 2985.774] (II) RADEON(0): Output HDMI-0 connected
[ 2985.774] (II) RADEON(0): Output DVI-0 disconnected
[ 2985.774] (II) RADEON(0): Output DVI-1 connected
[ 2985.774] (II) RADEON(0): Using user preference for initial modes
[ 2985.774] (II) RADEON(0): Output HDMI-0 using initial mode 1920x1080
[ 2985.774] (II) RADEON(0): Output DVI-1 using initial mode 1920x1080
[ 2985.774] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 2985.774] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:40000000 visible:f7d7000
[ 2985.774] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 2985.774] (==) RADEON(0): DPI set to (96, 96)
[ 2985.774] (II) Loading sub module "fb"
[ 2985.774] (II) LoadModule: "fb"
[ 2985.774] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2985.774] (II) Module fb: vendor="X.Org Foundation"
[ 2985.774] compiled for 1.10.3.901, module version = 1.0.0
[ 2985.774] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2985.774] (II) Loading sub module "ramdac"
[ 2985.774] (II) LoadModule: "ramdac"
[ 2985.774] (II) Module "ramdac" already built-in
[ 2985.774] (--) Depth 24 pixmap format is 32 bpp
[ 2985.774] (II) RADEON(0): [DRI2] Setup complete
[ 2985.774] (II) RADEON(0): [DRI2] DRI driver: r600
[ 2985.774] (II) RADEON(0): Front buffer size: 16200K
[ 2985.774] (II) RADEON(0): VRAM usage limit set to 213829K
[ 2985.774] (==) RADEON(0): Backing store disabled
[ 2985.774] (II) RADEON(0): Direct rendering enabled
[ 2985.774] (II) RADEON(0): Setting EXA maxPitchBytes
[ 2985.774] (II) EXA(0): Driver allocated offscreen pixmaps
[ 2985.774] (II) EXA(0): Driver registered support for the following operations:
[ 2985.774] (II) Solid
[ 2985.774] (II) Copy
[ 2985.774] (II) Composite (RENDER acceleration)
[ 2985.774] (II) UploadToScreen
[ 2985.774] (II) DownloadFromScreen
[ 2985.774] (II) RADEON(0): Acceleration enabled
[ 2985.774] (==) RADEON(0): DPMS enabled
[ 2985.774] (==) RADEON(0): Silken mouse enabled
[ 2985.774] (II) RADEON(0): Set up textured video
[ 2985.774] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 2985.774] (--) RandR disabled
[ 2985.774] (II) Initializing built-in extension Generic Event Extension
[ 2985.774] (II) Initializing built-in extension SHAPE
[ 2985.774] (II) Initializing built-in extension MIT-SHM
[ 2985.774] (II) Initializing built-in extension XInputExtension
[ 2985.774] (II) Initializing built-in extension XTEST
[ 2985.774] (II) Initializing built-in extension BIG-REQUESTS
[ 2985.774] (II) Initializing built-in extension SYNC
[ 2985.774] (II) Initializing built-in extension XKEYBOARD
[ 2985.774] (II) Initializing built-in extension XC-MISC
[ 2985.774] (II) Initializing built-in extension SECURITY
[ 2985.774] (II) Initializing built-in extension XINERAMA
[ 2985.774] (II) Initializing built-in extension XFIXES
[ 2985.774] (II) Initializing built-in extension RENDER
[ 2985.774] (II) Initializing built-in extension RANDR
[ 2985.774] (II) Initializing built-in extension COMPOSITE
[ 2985.774] (II) Initializing built-in extension DAMAGE
[ 2985.780] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 2985.780] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 2985.780] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 2985.780] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 2985.780] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 2985.780] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r600_dri.so
[ 2985.780] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 2985.781] (II) RADEON(0): Setting screen physical size to 1016 x 285
[ 2985.813] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 2985.813] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2985.813] (II) LoadModule: "evdev"
[ 2985.813] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2985.813] (II) Module evdev: vendor="X.Org Foundation"
[ 2985.813] compiled for 1.10.0, module version = 2.6.0
[ 2985.813] Module class: X.Org XInput Driver
[ 2985.813] ABI class: X.Org XInput driver, version 12.2
[ 2985.813] (II) Using input driver 'evdev' for 'Power Button'
[ 2985.813] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2985.813] (**) Power Button: always reports core events
[ 2985.813] (**) Power Button: Device: "/dev/input/event6"
[ 2985.813] (--) Power Button: Found keys
[ 2985.813] (II) Power Button: Configuring as keyboard
[ 2985.813] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
[ 2985.813] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 2985.813] (**) Option "xkb_rules" "evdev"
[ 2985.813] (**) Option "xkb_model" "evdev"
[ 2985.813] (**) Option "xkb_layout" "us"
[ 2985.832] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 2985.832] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2985.832] (II) Using input driver 'evdev' for 'Power Button'
[ 2985.832] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2985.832] (**) Power Button: always reports core events
[ 2985.832] (**) Power Button: Device: "/dev/input/event5"
[ 2985.832] (--) Power Button: Found keys
[ 2985.832] (II) Power Button: Configuring as keyboard
[ 2985.832] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5/event5"
[ 2985.832] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 2985.832] (**) Option "xkb_rules" "evdev"
[ 2985.832] (**) Option "xkb_model" "evdev"
[ 2985.832] (**) Option "xkb_layout" "us"
[ 2985.835] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP (/dev/input/event9)
[ 2985.835] (II) No input driver/identifier specified (ignoring)
[ 2985.836] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard (/dev/input/event0)
[ 2985.836] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
[ 2985.836] (II) Using input driver 'evdev' for 'Logitech Logitech Illuminated Keyboard'
[ 2985.836] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2985.836] (**) Logitech Logitech Illuminated Keyboard: always reports core events
[ 2985.836] (**) Logitech Logitech Illuminated Keyboard: Device: "/dev/input/event0"
[ 2985.836] (--) Logitech Logitech Illuminated Keyboard: Found keys
[ 2985.836] (II) Logitech Logitech Illuminated Keyboard: Configuring as keyboard
[ 2985.836] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb6/6-1/6-1:1.0/input/input0/event0"
[ 2985.836] (II) XINPUT: Adding extended input device "Logitech Logitech Illuminated Keyboard" (type: KEYBOARD)
[ 2985.836] (**) Option "xkb_rules" "evdev"
[ 2985.836] (**) Option "xkb_model" "evdev"
[ 2985.836] (**) Option "xkb_layout" "us"
[ 2985.837] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard (/dev/input/event1)
[ 2985.837] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
[ 2985.837] (II) Using input driver 'evdev' for 'Logitech Logitech Illuminated Keyboard'
[ 2985.837] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2985.837] (**) Logitech Logitech Illuminated Keyboard: always reports core events
[ 2985.837] (**) Logitech Logitech Illuminated Keyboard: Device: "/dev/input/event1"
[ 2985.837] (--) Logitech Logitech Illuminated Keyboard: Found 1 mouse buttons
[ 2985.837] (--) Logitech Logitech Illuminated Keyboard: Found scroll wheel(s)
[ 2985.837] (--) Logitech Logitech Illuminated Keyboard: Found relative axes
[ 2985.837] (--) Logitech Logitech Illuminated Keyboard: Found absolute axes
[ 2985.837] (--) Logitech Logitech Illuminated Keyboard: Found keys
[ 2985.837] (II) Logitech Logitech Illuminated Keyboard: Configuring as mouse
[ 2985.837] (II) Logitech Logitech Illuminated Keyboard: Configuring as keyboard
[ 2985.837] (II) Logitech Logitech Illuminated Keyboard: Adding scrollwheel support
[ 2985.837] (**) Logitech Logitech Illuminated Keyboard: YAxisMapping: buttons 4 and 5
[ 2985.837] (**) Logitech Logitech Illuminated Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2985.837] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb6/6-1/6-1:1.1/input/input1/event1"
[ 2985.837] (II) XINPUT: Adding extended input device "Logitech Logitech Illuminated Keyboard" (type: KEYBOARD)
[ 2985.837] (**) Option "xkb_rules" "evdev"
[ 2985.837] (**) Option "xkb_model" "evdev"
[ 2985.837] (**) Option "xkb_layout" "us"
[ 2985.837] (EE) Logitech Logitech Illuminated Keyboard: failed to initialize for relative axes.
[ 2985.837] (II) Logitech Logitech Illuminated Keyboard: initialized for absolute axes.
[ 2985.837] (**) Logitech Logitech Illuminated Keyboard: (accel) keeping acceleration scheme 1
[ 2985.837] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration profile 0
[ 2985.837] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration factor: 2.000
[ 2985.837] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration threshold: 4
[ 2985.837] (II) config/udev: Adding input device Logitech G500 (/dev/input/event2)
[ 2985.837] (**) Logitech G500: Applying InputClass "evdev pointer catchall"
[ 2985.837] (II) Using input driver 'evdev' for 'Logitech G500'
[ 2985.837] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2985.837] (**) Logitech G500: always reports core events
[ 2985.837] (**) Logitech G500: Device: "/dev/input/event2"
[ 2985.837] (--) Logitech G500: Found 20 mouse buttons
[ 2985.837] (--) Logitech G500: Found scroll wheel(s)
[ 2985.837] (--) Logitech G500: Found relative axes
[ 2985.837] (--) Logitech G500: Found x and y relative axes
[ 2985.837] (II) Logitech G500: Configuring as mouse
[ 2985.837] (II) Logitech G500: Adding scrollwheel support
[ 2985.837] (**) Logitech G500: YAxisMapping: buttons 4 and 5
[ 2985.837] (**) Logitech G500: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2985.837] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb6/6-2/6-2:1.0/input/input2/event2"
[ 2985.837] (II) XINPUT: Adding extended input device "Logitech G500" (type: MOUSE)
[ 2985.838] (II) Logitech G500: initialized for relative axes.
[ 2985.838] (**) Logitech G500: (accel) keeping acceleration scheme 1
[ 2985.838] (**) Logitech G500: (accel) acceleration profile 0
[ 2985.838] (**) Logitech G500: (accel) acceleration factor: 2.000
[ 2985.838] (**) Logitech G500: (accel) acceleration threshold: 4
[ 2985.838] (II) config/udev: Adding input device Logitech G500 (/dev/input/mouse0)
[ 2985.838] (II) No input driver/identifier specified (ignoring)
[ 2985.838] (II) config/udev: Adding input device Logitech G500 (/dev/input/event3)
[ 2985.838] (**) Logitech G500: Applying InputClass "evdev keyboard catchall"
[ 2985.838] (II) Using input driver 'evdev' for 'Logitech G500'
[ 2985.838] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2985.838] (**) Logitech G500: always reports core events
[ 2985.838] (**) Logitech G500: Device: "/dev/input/event3"
[ 2985.838] (--) Logitech G500: Found 1 mouse buttons
[ 2985.838] (--) Logitech G500: Found scroll wheel(s)
[ 2985.838] (--) Logitech G500: Found relative axes
[ 2985.838] (--) Logitech G500: Found absolute axes
[ 2985.838] (--) Logitech G500: Found keys
[ 2985.838] (II) Logitech G500: Configuring as mouse
[ 2985.838] (II) Logitech G500: Configuring as keyboard
[ 2985.838] (II) Logitech G500: Adding scrollwheel support
[ 2985.838] (**) Logitech G500: YAxisMapping: buttons 4 and 5
[ 2985.838] (**) Logitech G500: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2985.838] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb6/6-2/6-2:1.1/input/input3/event3"
[ 2985.838] (II) XINPUT: Adding extended input device "Logitech G500" (type: KEYBOARD)
[ 2985.838] (**) Option "xkb_rules" "evdev"
[ 2985.838] (**) Option "xkb_model" "evdev"
[ 2985.838] (**) Option "xkb_layout" "us"
[ 2985.838] (EE) Logitech G500: failed to initialize for relative axes.
[ 2985.838] (II) Logitech G500: initialized for absolute axes.
[ 2985.838] (**) Logitech G500: (accel) keeping acceleration scheme 1
[ 2985.838] (**) Logitech G500: (accel) acceleration profile 0
[ 2985.838] (**) Logitech G500: (accel) acceleration factor: 2.000
[ 2985.838] (**) Logitech G500: (accel) acceleration threshold: 4
[ 2985.840] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event8)
[ 2985.840] (II) No input driver/identifier specified (ignoring)
[ 2985.842] (II) config/udev: Adding input device Logitech Logitech G35 Headset (/dev/input/event4)
[ 2985.842] (**) Logitech Logitech G35 Headset: Applying InputClass "evdev keyboard catchall"
[ 2985.842] (II) Using input driver 'evdev' for 'Logitech Logitech G35 Headset'
[ 2985.842] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2985.842] (**) Logitech Logitech G35 Headset: always reports core events
[ 2985.842] (**) Logitech Logitech G35 Headset: Device: "/dev/input/event4"
[ 2985.842] (--) Logitech Logitech G35 Headset: Found 2 mouse buttons
[ 2985.842] (--) Logitech Logitech G35 Headset: Found absolute axes
[ 2985.842] (--) Logitech Logitech G35 Headset: Found keys
[ 2985.842] (II) Logitech Logitech G35 Headset: Configuring as mouse
[ 2985.842] (II) Logitech Logitech G35 Headset: Configuring as keyboard
[ 2985.842] (**) Logitech Logitech G35 Headset: YAxisMapping: buttons 4 and 5
[ 2985.842] (**) Logitech Logitech G35 Headset: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2985.842] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb9/9-1/9-1:1.3/input/input4/event4"
[ 2985.842] (II) XINPUT: Adding extended input device "Logitech Logitech G35 Headset" (type: KEYBOARD)
[ 2985.842] (**) Option "xkb_rules" "evdev"
[ 2985.842] (**) Option "xkb_model" "evdev"
[ 2985.842] (**) Option "xkb_layout" "us"
[ 2985.842] (II) Logitech Logitech G35 Headset: initialized for absolute axes.
[ 2985.842] (**) Logitech Logitech G35 Headset: (accel) keeping acceleration scheme 1
[ 2985.842] (**) Logitech Logitech G35 Headset: (accel) acceleration profile 0
[ 2985.842] (**) Logitech Logitech G35 Headset: (accel) acceleration factor: 2.000
[ 2985.842] (**) Logitech Logitech G35 Headset: (accel) acceleration threshold: 4
[ 2985.845] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 2985.845] (II) No input driver/identifier specified (ignoring)
[ 2986.246] (II) RADEON(0): EDID vendor "ACI", prod id 10230
[ 2986.246] (II) RADEON(0): Using EDID range info for horizontal sync
[ 2986.246] (II) RADEON(0): Using EDID range info for vertical refresh
[ 2986.246] (II) RADEON(0): Printing DDC gathered Modelines:
[ 2986.246] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 2986.246] (II) RADEON(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz)
[ 2986.246] (II) RADEON(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz)
[ 2986.246] (II) RADEON(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz)
[ 2986.246] (II) RADEON(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz)
[ 2986.246] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 2986.246] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 2986.246] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 2986.246] (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 2986.246] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 2986.246] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 2986.246] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 2986.246] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 2986.246] (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 2986.246] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 2986.246] (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 2986.246] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 2986.246] (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 2986.246] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 2986.246] (II) RADEON(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
[ 2986.246] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 2986.246] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 2986.246] (II) RADEON(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 2986.246] (II) RADEON(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 2986.246] (II) RADEON(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 2986.246] (II) RADEON(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz)
[ 2986.246] (II) RADEON(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz)
[ 2986.246] (II) RADEON(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz)
[ 2986.246] (II) RADEON(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz)
[ 2986.246] (II) RADEON(0): Modeline "1440x480"x0.0 54.00 1440 1472 1596 1716 480 489 495 525 -hsync -vsync (31.5 kHz)
[ 2986.246] (II) RADEON(0): Modeline "1440x576"x0.0 54.00 1440 1464 1592 1728 576 581 586 625 -hsync -vsync (31.2 kHz)
[ 2986.246] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz)
[ 2986.246] (II) RADEON(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz)
[ 2986.250] (II) RADEON(0): Allocate new frame buffer 1920x1080 stride 1920
[ 2986.250] (II) RADEON(0): VRAM usage limit set to 221119K

Which mac mini model supports dual monitors

Hi there
I gather that at some point mac minis started to support dual monitors natively.
Would anyone be able to clear up which model this was?
Cheers

Welcome to Apple Discussions!
October 20, 2009 to June 14, 2010 Mac Minis supported mini-DisplayPort & and mini-DVI.
June 15, 2010 and later supported mini-DisplayPort & HDMI.

Dual Monitor Wallpaper

I have 2 monitors and downloaded a dual monitor wallpaper (3200 x 1200) but I cannot find a preference to stretch the wallpaper across both monitors so half appears on one and the other half appears on the other.
Does such a setting exist or do I have to dust down Photoshop?

Hi!
I have the same problem with my MacMini late 2010: I changed the wallpaper to a single color. After rebooting, it changes to the standard-wallpaper.
I have no idea to fix ist.
Torsilio

Odd shadowing effects in XFCE with dual monitors and intel graphics

Linux fowie-desktop 2.6.34-ARCH #1 SMP PREEMPT Mon Jul 5 21:03:38 UTC 2010 i686 Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz GenuineIntel GNU/Linux
lspci shows:
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
not using an xorg.conf
rc.conf (snippets)
LOCALE="en_US.UTF-8"
HARDWARECLOCK="UTC"
TIMEZONE="America/Denver"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(!usblp vboxdrv !saa7134 saa7134-dvb)
DAEMONS=(syslog-ng dbus hal @network @netfs @crond @alsa @cups @sensors @samba @ddclient @sshd @httpd @mysqld @smartd)
and my .xinitrc:
/usr/bin/xrandr --output VGA1 --left-of DVI1 --output DVI1 --mode 1920x1080
exec ck-launch-session startxfce4
Xorg.0.log at http://pastebin.ca/1925313
If I use the xf86-video-intel driver from extra, the xrandr command to do dual-outputs fails and I get both monitors showing the same desktop (mirrored mode). I switched to use AUR's xf86-video-intel-git (reading the forums it said this would fix the dual-monitor issue until extra moves to 2.12.0-2) and I do get the dual monitors working propery with the xrandr command, but I'm experiencing wierd effects. For every unminimized window on the desktop, if I put another window in front, the shadow of the window below stays on top of the window containing the focus. Hard to explain, so I'll use a photo:
That's what it looks like with xf89-video-intel-git, libdrm-git, dri-git, and anything else git and intel graphics related I can find. Any ideas what's wrong, or what I would even call this problem so I can look around and see if anyone else is having the same issues?
Last edited by fowie (2010-08-25 20:21:53)

Ok, I went into the XFCE4 setting manager and opened the "Window Manager Tweaks" module, Under "Compositor" if I disable display compositing the shadowing effect is gone, making the display much more usable (thanks!). But now compositing does not work. Guess I'll go report this to XFCE, or is the XFCE compositing manager handled by someone else?
Last edited by fowie (2010-08-25 23:11:54)

[SOLVED] Dual monitors and raid - linux newb

Hi
I'm raginaot and I'll probably be asking a lot of dumb questions here in the near future
I just decided to say goodbye to windows for a while. Been wasting too much time gaming and it was either - switch to linux or - sell my computer and move to the desert. I'm gonna try the former first and see how it goes.
I managed to install arch and get gnome up and running with the help of the most awesome linux install guide I have ever seen and I installed the xf86-video-ati driver package but I'm having trouble getting it to recognise my 2 monitors.
I'll list my hardware specs before I go any further:
CPU: i7 920
RAM: 12GB (3x4) Mushkin Silverline 1333MHz
Motherboard: Gigabyte EX58-UD3R (rev 1.6)
GPU: ATI HD5870 1GB
Souncard: Auzentech X-fi forte
Monitors: Samsung 2693HM and Samsung 226BW
now the monitors seem to be stuck in mirrored mode, both showing the same image at 1280*1024 resolution
when I try to set them both to on and their native resolutions (1920*1200 and 1680*1050) in the display settings I get a message that says:
"the selected configuration for displays could not be applied
required virtual size does not fit available size: requested=(3600, 1200), minimum=(320, 200), maximum=(1920, 1920"
But when I unplug the 22" display, I can set the 26" to native res just fine and vice versa.
Now to the second issue...
I have 2 1TB drives in raid0, but in fdisk -l they appear as 2 seperate 1TB drives instead of 1 big 2TB like they're supposed to (see output below).
I guess I have to mount them in some special way, but I have no idea how. The raid worked right away in linux mint.
fdisk wrote:
Disk /dev/sdb: 1000.2 GB, 1000203804160 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x1c7fba32
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 13 102400 7 HPFS/NTFS
Partition 1 does not end on cylinder boundary.
/dev/sdb2 13 34421 276377600 7 HPFS/NTFS
/dev/sdb3 34421 243202 1677035520 7 HPFS/NTFS
Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xb876c595
Disk /dev/sdc doesn't contain a valid partition table
Thanks in advance.
Last edited by raginaot (2010-11-24 03:29:46)

Bregol wrote:
Glad you were able to figure out the RAID part - I can't really help you with that. As far as the dual monitor setup, I would suspect that you will need to do some stuff with the xorg config to get it working. I would say that xorg.log would be the first thing to look at - to see what is limiting the modes available to X. Maybe post the xorg.log and your x configuration
My post in this thread might give a bit of background on how X comes up with what resolutions it lets you choose.
https://bbs.archlinux.org/viewtopic.php?id=101547
thanks
I pasted the xorg logs here: Xorg log 0: http://pastebin.com/tHPqWVaw and Xorg log 1: http://pastebin.com/nPhdpCE0
and here is the xorg.conf in /etc/X11 (hope that's the right file..)
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "record"
Load "glx"
Load "extmod"
Load "dri"
Load "dri2"
Load "dbe"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 470 300 # mm
Identifier "Monitor0"
VendorName "SAM"
ModelName "SyncMaster"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # 
#Option "AGPMode" # 
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # 
#Option "GARTSize" # 
#Option "RingSize" # 
#Option "BufferSize" # 
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # 
#Option "DepthBits" # 
#Option "PCIAPERSize" # 
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "CustomEDID" # [<str>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # 
#Option "RageTheatreCrystal" # 
#Option "RageTheatreTunerPort" # 
#Option "RageTheatreCompositePort" # 
#Option "RageTheatreSVideoPort" # 
#Option "TunerType" # 
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # 
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ClockGating" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
#Option "EXAVSync" # [<bool>]
#Option "ATOMTVOut" # [<bool>]
#Option "R4xxATOM" # [<bool>]
#Option "ForceLowPowerMode" # [<bool>]
#Option "DynamicPM" # [<bool>]
#Option "NewPLL" # [<bool>]
#Option "ZaphodHeads" # <str>
Identifier "Card0"
Driver "radeon"
BusID "PCI:3:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Not sure what to look for here...
The "#DisplaySize 470 300" line looks like something.
I only have the 26" screen plugged in at the moment, if that matters. Does the xorg log change it self when I plug in another screen?

[Solved]Openbox dual monitor crashing

I have been working this out for days to no avail. I have an ATI video card not using the catalyst drivers. Dual monitors worked fine in KDE without any additional setup, and no xorg.conf. In openbox i have tried with arandr, and manual. but when i enable the second monitor its seems that openbox crashes, because whatever is on the screen at the time of enabling the monitor turns to static. I think its openbox because i still have a functional mouse cursor and has proper fucntions accross both monitors in any configuration that i try. when it crashes i have to hard reboot. when i reboot with the monitor still plugged in, both lvds and vga will display a cloned image at the same resolution which is the wrong resolution for both lvds and vga.
I have googled till there is no link unclicked, and wiki give me nothing. i dont believe that i need to set up an xorg.conf as the external is detected fine. its almost like when x applies the settings it corrupts openbox.
anyone have any ideas?
Last edited by zero_one (2010-09-18 18:26:28)

zero_one wrote:you mean add the monitors to a xx-monitor.conf? i can give that a try but it doesnt seem that would provide the flexibility that im looking for as sometimes i use the external monitor disabiling lvds, sometimes right of, and sometimes i use hdmi to my tv set right of, to watch movies.
I mean add the monitors to xorg.conf. Here is the xorg.conf I use with openbox (separate X display for the TV), just to give you an idea - yours will differ with ATI:
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen[0]"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "ServerLayout"
Identifier "tv"
Screen 0 "Screen[1]" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Module"
Load "glx"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
Option "AutoRepeat" "210 50" #added, did no good, use ~/.xinitrc xset
Option "XkbOptions" "terminate:ctrl_alt_bksp"
EndSection
Section "Monitor"
Identifier "Monitor[0]"
HorizSync 31.0 - 83.0
VertRefresh 55.0 - 76.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Monitor[1]"
HorizSync 15.0 - 620.0
VertRefresh 15.0 - 600.0
EndSection
Section "Device"
Identifier "Device[0]"
Driver "nvidia"
BoardName "GeForce 8500 GT"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "Device[1]"
Driver "nvidia"
BoardName "GeForce 8500 GT"
#adjust using 'lspci' or cat /proc/pci
BusID "PCI:1:0:0"
Option "ConnectedMonitor" "TV"
EndSection
Section "Screen"
#nvidia
Identifier "Screen[0]"
Device "Device[0]"
Monitor "Monitor[0]"
DefaultDepth 24
Option "TwinView" "0"
# Option "metamodes" "DFP: nvidia-auto-select +0+0"
Option "NoLogo" "True"
Option "RenderAccel" "True"
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Depth 24
Modes "nvidia-auto-select"
EndSubSection
EndSection
Section "Screen"
#nvidia
Identifier "Screen[1]"
Device "Device[1]"
Monitor "Monitor[1]"
DefaultDepth 24
Option "TwinView" "0"
Option "UseEDID" "FALSE"
Option "ConnectedMonitor" "TV"
Option "TvOutFormat" "Component"
Option "metamodes" "CRT: 1920x1080 +0+0"
Option "TVStandard" "HD1080i"
Option "RenderAccel" "True"
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Depth 24
Modes "nvidia-auto-select"
EndSubSection
EndSection
Then I start the second X display on the TV with this in openbox's autostart.sh:
(sleep 5 && xinit /usr/bin/openbox -- /usr/bin/X :1 -layout tv -nolisten tcp) &
Thus there are two instances of openbox running.
It may not give you the flexibility, but for testing it may help you narrow down what is causing the problem and find remedies.
Also, the monitor turning to static sounds more like a driver or X issue than something with openbox.
Last edited by IgnorantGuru (2010-09-18 17:46:12)

Dual Monitors without Xorg.conf Help

I have an Acer Aspire One and Im trying to setup Dual Displays. Every guide Ive found, including the Acer One Article in the Wiki talks about editing the Xorg.conf file, yet my system seems to be running without one. Other than problems setting up the dual displays I dont have any issues with Display Settings so it seems my installation of arch linux seems to be using some other technology other than Xorg. Does any one know how the Display settings are setup without the use of the Xorg.conf file ? This is a fresh Arch Linux Base Install using only OpenBox.
Ive also tried using XRandR to setup my dual displays but I keep getting an error and google doesnt provide an answer.
I try and run the following command ( wich works fine on my other PC )
[zero@zero ~]$ xrandr --auto --output LVDS1 --mode 1024x600 --right-of VGA1
And get the following error
X Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 149 (RANDR)
Minor opcode of failed request: 7 (RRSetScreenSize)
Serial number of failed request: 24
Current serial number in output stream: 25
Any help would be appreciated. Thanks
Last edited by devspyder (2010-07-18 19:08:32)

WooHoo !
awkwood - You Rock ! I feel like an idiot for not paying closer attention to your first post. I finally realized what you were saying and figured out how to do the downgrade.
If it's 2.12.0 I'd suggest trying 2.11.0 instead.
The most recent update borked my dual display with a similar error message but 2.11 works fine.
I don't use an xorg.conf.
So essentially this seems to be a bug with version 2.12 of the xf86-video-intel driver. I downgraded to ver 2.11 and everything works perfectly. I am running dual monitors at full resolution with no fuss. So again awkwood I thank you !
For other Arch Newbies who have this issue in the mean time until they fix the bug, this is how I did the downgrade.
Step 1:
download the 2.11 package from the link below
http://arm.konnichi.com/extra/os/i686/x … pkg.tar.xz
Step 2:
Open a terminal and cd to the directory where you saved the file
$ cd /home/$USERNAME/Downloads
Step 3:
Use pacman to install the package
sudo pacman -U xf86-video-intel-2.11.0-2-i686.pkg.tar.xz
Finally reboot. When you log back in everything should work fine
Again thanks to awkwood as well as karol, blind, Inxsible and everyone else for their help. Everyone here is so helpful, I am defiantly an Arch user for life. Hopefully they will fix the bug in the next version of the driver. My next step is to see about filling a bug report.

MBA (2010) & Dual Monitors

Similar Messages

Maybe you are looking for