MBA 2013 battery loss overnight with Mavericks

Hello,
I've been having some trouble since i updated from Mavericks. My battery loses over 20% in 6 hours of sleep mode.
I first had this before I updated OSX to Mavericks, but it turned out it was because of VMWare VMs left open. This issue is settled but I still have battery loss, so I figured it has to be Mavericks.
Any hits?

Use it and don't abuse it. The battery will last as long as the battery will last. Some last longer than others.
One tip.
Never let it run don't to below 20% if at all possible and never below 10% before you plug it in to recharge
Second tip.
You do not have to disconnect it from the AC adapter just because the battery reaches 100% charge. The battery will not over charge.
All the best to you.

Similar Messages

MBA 2013 battery drain quickly during sleep after updated to mavericks

Hi,
After I updated to mavericks this Tuesday, I noticed the battery drains quickly during sleep mode.
Before the system update, everything was ok. Each night after I closed the lid, it went to sleep and the battery only droped less than 5% after sleep of the whole night.
But during the last two nights after system update, it drained more than 50% of the battery during 8-hour sleep. I could feel some heat on its back when I picked it up. I did not change any system setting or installed any new apps.
my MBA: latest 2013 version, 13 inch, haswell i7, 8G ram, 256 SSD.
I liked my mba so much because of the long battery life. But now It was really annoying because I have to charge it very often.
Any ideas how to solve this issue?

Hi Hans,
There's another thread going with the same issue as you... check:
MBA mid-2013 wakes from sleep every minute on Mavericks
I still haven't seen a resolution anywhere... smacks of something on Apple's side with so many users complaning

MBA 2013 - cursor control lost with Bluetooth speakers and Acrobat Pro

When using Acrobat Prof to fill in form (using Typewriter) and have Bluetooth on playing audio speakers the cursor control in Acrobat goes hayware and cannot control cursor - ok when I close bluetooth and play music via MBA speakers - any fix except to stop using the Bluetooth and external audio speakers?
Using i7 ultimate - 8Gb RAM+512 SSD

It might be an hardware issue of course. But I'd start by completely uninstalling the Symantec software.

Battery drained overnight with no use.

Charging normally now.
I'm wondering if it could be from my BT being on and near the phone? Or an open application (but don't those auto-terminated if not in use)?

Charging normally now.
I'm wondering if it could be from my BT being on and near the phone? Or an open application (but don't those auto-terminated if not in use)?

MBA 2013 shut down without reason after upgrade MAVERICKS

Hi there ,
I have a new MBA 2013 , till the upgrade to Mavericks (for free) no worries , but today after the upgrade he shutted down unexpectedly twice !!! What's happening here ? Am I the only one having this kind of issue?
HELP ME
THX by advance
Raph from Brussels

nana4design,
some 15-inch Mid 2010 MacBook Pros are known to have a defective NVIDIA GPU. Since you’re getting GPU panics, yours might be one with the defect. Apple had a gratis servicing program for this model’s defect that lasted for three years from the date of the MacBook Pro’s purchase; they still offer the servicing program, but it is no longer guaranteed to be gratis. I’d recommend making an appointment at your nearest Apple store, to have them run their Video System Test on your MacBook Pro to confirm whether or not its NVIDIA GPU has this defect.

Can't Boot From Mountain Lion Startup Drive on MBP with Mavericks Installed

Hi everyone,
I'm trying to boot up my late 2013 15" MBP (shipped with Mavericks) using an external startup disk running Mountain Lion. I really need to use the FCP iChat Theater feature, as I need to do some long distance editing. The startup disk works just fine, I checked it on another computer, but when I restart my Mavericks mac and choose it as the boot drive, I just get a grey screen with the universal "no"symbol (circle with a slash through it).
Any ideas on how to get around this issue?
Thanks!

Starting up from a system version older than the original one is not supported and usually not possible.

To MBA 2013 i5 users: What is the battery life?

Hey guys,
there are some hot discussions over battery life in MBA 2013 with i7. I personally own one and I can say that 12 hours is nothing close to the truth. Battery life can reach that long when WiFi is turned off, but web browsing is the most basic activity on a computer these days. My MBA gets around 7 hours of battery life when using Internet connection and I feel cheated by Apple.
I'm thinking of exchanging my model to i5 one, but haven't out whether battery life is significantly better or it's same kind of gimmick.

several reports indicate (from reputable testing sites) that 12 hours on the I5 13" are understated, and that 2 hardcore tests indicated just under 13 HOURS, or a hair OVER 13 hours
I have an I5 13", and I dont say with difficulty that batt. life is, in short, crazy / shockinginly fantastic.
My older 2011 Macbook Air i just sold, ......it literally blows my old AIR out of the water powerwise, and writing 1.1GIG Photoshop to the HD, was id say about 40% faster from full install between the 2. (old and new).
I run nonstop youtube (white noise) in the background.....(on firefox, which is a battery hog compared to Safari), and typing, and opening PDF files.........under those conditions, im getting about nearly 12 hours batt. life, of the 2 times ive actually clocked it.
Ive compared my I5 next to my friend Stefans I7 13", i did same same testing for 5 hours, and his was 28% LESS batt life

MacBook Air 2013 with Mavericks 10.9.1 has Facetime HD Camera issues

Hi, I've been using a new 2013 MacBook Air with 10.9.1 for the last 3 weeks (I used to have a 2010 Macbook Pro 15 with Mavericks) and the Facetime HD camera is having issues being detected by different applications.
In my case I mainly use Google Hangouts, Skype, and sometimes Facetime. The problem lies on that the camera sometimes works and sometimes it doesn't.
I usually reboot the camera with 'sudo killall AppleCameraAssistant' and that makes it work, but it shouldn't be like that.
Please note that this was not happening with my 2010 MacBook Pro with Mavericks. I changed to this new 2013 MacBook Air only 3 weeks ago. Nevertheless, people that I work with (who use retina macbooks with Mavericks) are not having this issue.
Last week I had to install a plugin (in chrome) for a new online site similar to Hangouts called BlueJeans. Bluejeans very seldomly recognizes the cam, only when I reboot it with the 'line' above or reboot the machine. The people I work with didn't have any issues, so I suspect this has to do with 2013 MacBook Air's Facetime HD cameras which might be different to the rest, or too new on the market.
It's as if when I start using it in Hangouts and then hang, later it might not work in Skype, or viceversa.
If you can help, that'll be great, and I appreciate it. Nevertheless, I feel Apple must take care of this in the next Mavericks update (many people are having camera issues).
Jimmy

Hi Jal1980
I had the same pb...
On my MacBook Pro Mid 2012 I Had a problem with my video on skype, facetime, photoboot....
I have tried all the solution offered in every forum and never got to a satisfying result. I downgraded to mountain lion from mavericK without result. I reseted the Pram or SMC (I forgot), and other things, I played with the plugin /Library/CoreMediaIO/Plug-Ins/DAL/, I tried several version of skype.... NONE of this solution worked....
Until that day a friend came to my place and installed AppleJack for Mac, a free software (http://download.cnet.com/AppleJack/3000-2094_4-40293.html) that totally solved this issue amongst others...
Here is the full page of the program http://applejack.sourceforge.net/man.html
And here quick instructions on how to use the program. Have fun!
Restart your computer. After you hear the startup chime, press and hold down the
Cmd and s keys together (this will put you in single user mode). You should soon get a Terminal-type screen with a dramatic garble of indecipherable messages and a shell prompt that looks something like [root#]
2. Now, type applejack at the prompt. (If you’ve installed applejack manually, or have not created an alias to applejack for the root user, you may have to enter the full path to the script at the prompt.) You will be guided through a series of steps that will repair your drive and delete possibly corrupted files. Options are selected by typing the number corresponding to the task you want to perform, and then hitting the return key. For example, when you see a few different options, like this:
[1] Option One [2] Do something else [3] Another task [4] A useful task
From time to time, in interactive mode, you will be asked to answer yes or no to a question. To answer yes, type y and hit the return key. To answer no, type n and hit the return key.
An advantage of using the interactive mode instead of auto mode is that you are given options for also cleaning out user-level caches and preference files. If you would like to clean out your main admin user caches, for example, you will need to use interactive mode.
3. Auto mode: If you want to leave
applejack to do it’s own thing, just choose option [a] when the script starts. You can also start right up in auto mode by typing: applejack auto at the prompt. applejack will run through all the basic cleanup tasks in order. Alternatively, you can also type applejack auto restart which will tell applejack to do the cleanup tasks and then automatically restart your computer. Other options are: applejack auto shutdown which tells AppleJack to shut down the computer after running its tasks, or applejack AUTO shutdown which tells AppleJack to run automatically in "deep cleaning" mode (see above) and then shut down.
I hope this helps. It completely solved my issue.

Battery keeps draining with clamshell is shut with OS X Mavericks and wi-fi dropping.

I have seen numerous ariticles of folks having issues after an upgrade with their battery. When the clamshell is closed and you come back a few hours later your battery is drained. This is after making sure all apps are closed and checking energy savings settings. Reverted back to 10.8.5 and had no issues battery issues. My model Late 2012 Macbook Pro Retina. In addition when streaming movies from Vudu, with mavericks it would periodically drop connection. Again reverted back and no issues.
Any one have any ideas on this one?

Please click the More Like This link to your right, ones that are checked green indicate the problem has been solved.

Can Macbook Pro 15" Retina (Early 2013) with Mavericks display HIDPI on external monitor?

Can Macbook Pro 15" Retina (Early 2013) with Mavericks display HIDPI on external monitor?

you cant return it unless you have had it for 14 days or less, but you can bring it to an Apple store or AASP for warranty service.

HT6114 i have a problem with notification of service battery since i installed mavericks. My macbook air is 2012 version.

i have a problem with notification of service battery since i installed mavericks. My macbook air is 2012 version. Any solution?

This from the crash log
Dyld Error Message:
Library not loaded: /System/Library/Frameworks/Accounts.framework/Versions/A/Accounts
Referenced from: /System/Library/StagedFrameworks/Safari/Safari.framework/Safari
indicates there is a missing library on your system. What problems were you having before that caused you to delete Safari? How did you delete it?
You're best bet in this case is to re-install the OS. While doing a re-install will not normally harm your user data having a good working backup in cases like this is essential.

IMac late 2013 with mavericks network drives

I have a late iMac 2013 27" just updated to mavericks. I leave my computer on over night with sleep mode off and by the morning all my mapped drives are gone and I cannot reconnect to them. I have to restart the computer to reconnect or I will just keep getting error messages to contact my administrator even though the servers are fine. Anyone have any suggestions?

No!The Question misunderstood!!
I need Imac 27 (Late 2013) to use as an external display for the system unit PC Windows 7 Ultimate x64.
Mexican guy on youtube that somehow made - http://www.youtube.com/watch?v=a7O9547mZII.
I fail!
I this device - http://deepstore.ru/advanced_search_result.php?podkluchit the system case to an Imac 27, which will act as an external monitor - search_in_description=1&keywords=Blackmagic+Intensity+Shuttle+T?
It will be necessary after connecting Thunderbolt connectors are some more buttons to push?BIOS Windows will I see?
Thanks for answers!!!

HT5994 I recently purchased the I Mac 2013 with Maverick OS X. I can no longer open documents that created in AppleWorks 6, PowerPC, my 2004 operating system.

I recently purchased the I Mac 2013 with Maverick OS X. I can no longer open documents that created in AppleWorks 6, PowerPC, my 2004 operating system.

PowerPC applications haven't been supported since 10.7. You will need to buy newer programs compatible with Mavericks.
Application Compatibility
AppleWorks in OS 10.7/10.8
AppleWorks in OS 10.7/10.8 (2)

Yosemite on MBA 2013: Incredibly Slow

Hello All,
Has anyone else noticed how laggy Yosemite is on their MBA 2013s?
I have. This thing used to be a powerhouse with Mavericks.
Specifically, I've noticed that the animations are a lot slower on the new OS and that the battery drains much faster. When doing my scroll to enter into mission control, the animation is choppy. When sliding between backgrounds, it's laggy. The only benefit from the new OS that I've noticed is that my text messages come to my computer as well as my phone.
So, has anyone here found ways to speed up the OS? Hopefully they aren't too complicated.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.apple.AirPortBaseStationAgent com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.SafariNotificationAgent com.apple.usbmuxd com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper ' ' 879294308 3627668074 1083382502 1274181950 1855907737 464843899 1233118628 2456546649 2636415542 842973933 891055588 998894468 695903914 1443423563 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i];if(n<10) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i]".plist";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' /:/d;/\./p;' '/\.appex\/Contents\/Info\.plist$/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:|suhel| VALI|ver-r|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" 'L*/P*/com.ap*.p*.ext*.*.*t -exec '"${c1[14]}"' :displayOrder" {} \;' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors appexes );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 4 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

SMC Fan Control - MBA 2013

Hi,
Can I ask if anyone has any issue with SMC Fan Control - v2.4 running on the latest MBA 2013?
My CPU Temp shows as "0%" although the fan speed is shown.
On MBA 2012, it works fine.
Thanks
Alan

works fine for me -->
macbook air late 2013 core i5 intel hd 5000 4 gb ram os x mavericks 10.9.1
smc fan control v2.4... maybe try re downloading it
goodluck

MBA 2013 battery loss overnight with Mavericks

Similar Messages

Maybe you are looking for