MBA 2013 not connecting to samsung HDtv ?

Hello I just purchased the mba 2013
My samsung hdtv does not recognize the mac, and the mac doesnt recognize the machine,
there are some sighns of trying to recognizeing each other but all attempts fail,
there are 4 HDMI connections in the TV ...
I am trying yo use my HDTV as my screen.
any help please please
Nadav.

Hi there,
I would recommend taking a look at some of the troubleshooting steps found in the article below.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
-Griff W.

Similar Messages

Outlook 2013 not connect with Exchange server 2013 in internal network

Hello All,
I Have two Exchange server 2013 in our environment. Both server install mailbox and CAS role. After configure exchange server 2013, Outlook 2013 not connect in internal network. I have configure outlook manually. i tried by using the suggestion from blog
but not work. Outlook show that Server cannot connect/ server name could not be resolved. in outlook setting i also put exchange proxy setting. In exchange admin center i have changed the OWA, OAB, Auto discover name. But still not work.
I know that outlook can be connect from external by using ssl certificate and publish outlook anywhere but i did my configure from internal network.
Can you please suggest as soon as possible.
Thanks,
Parvez

Hi,
Firstly, I’d like to explain, same with external users, internal users use Outlook Anywhere to connect with Exchange server and use Autodiscover get all settings.
Thus, let’s try the following resolutions:
1. run the following command: get-clientaccessservice |fl autodiscoverserviceinternaluri
2. check if the host name in the above URL is in the DNS server and there is a DNS entry about the host name points to the proper IP address.
3. Check if the above host name is in your certificate.
Thanks,
Angela
Angela Shi
TechNet Community Support

Bet you cant solve this ONE!!! Connecting my Samsung HDTV to my Macbook

I have looked for hours upon hours of all the forums. So here goes...
I have a Black Macbook running Snow Leaopard with a mini DVI to VGA adapter.
I have the VGA running to the back of my Samsung LCD 37" HDTV.
But when i press the source button on the tv, it says "no input device are connected".
I have tried multiple things such as picking a couple random displays (800x600 etc.)
I have also tried mirroring displays.
The crazy thing is that when i cascade my desktop or show my spaces, it shows the external monitor next to my main screen.
I read somewhere that if you get the refresh rate below 60hz that it would work, but thats not an option.
My mouse even acts like it goes to the next screen when i drag it all the way to the right.
I have called Samsung to no avail, even AppleCare couldnt really help.
If you solve this, you should put your application into AppleCare Support.
This is urgent that i get this fixed by Sunday Morning, Thanks for your help!!!
Message was edited by: MacOnly03

MacOnly03 wrote:
I have a Black Macbook running Snow Leaopard with a mini DVI to VGA adapter.
I have the VGA running to the back of my Samsung LCD 37" HDTV.
Is it an Apple brand mini DVI to VGA adapter? I've heard of incompatibilities with off brands. Have you tested the VGA to VGA cable to make sure it works? The reason I'm offering these suggestions is your MacBook knows something is plugged in but your TV isn't getting it. You might also check your tv's manual for a clue.

Lync Mobile 2013 not connected.

Hello Guys
I have the following problem with Lync Mobile 2013 ):
- I have running Lync 2013 Standard and configure Lync Mobile for Internal/External Link. When a user need to connect to internal lync with Wifi Connection, the connection is not established. Internal dns records for the url webapps.domain.net and also to
lyncdiscovery.domain.net were created but until now the mobiles are trying to connect for some time without success.
We reviewed the step without finding a solution to the problem of mobiles procedures.
Could someone tell me or help to solve this problem, because I stopped in this detail. We are not using TMG to publish internally and the firewall has open ports on our LAN.
Thanks for your help

For internal access, you will need lyncdiscoverinternal.domain.com an a redirect through your reverse proxy.
Here is a good link from Jeff Schertz:
http://blog.schertz.name/2013/07/understanding-lync-2013-mobility/
regards Holger Technical Specialist UC

I can not connect my samsung tab s tablet with ADE on my computer with a usb cable(.No connextion)

I have a new Samsung Tablet TAB S. I want E-books that i store on my computer in Adobe Digital Edition transport
to my samsung tablet to( Play Books App) if i connect a usb cable nothing hapens. If i connect my old tablet then there
come a connection symbol on my computer in ADE. Who can help me ?

Try going to system preferences>displays with evrything connected. You should see 2 windows "stacked" click detect display, then click the window in the back and it should show your monitor. Click mirror display.

September Macbook Air 2013 Not Connecting to Wi-Fi

Hi Guys,
Just got my new Macbook Air delivered yesterday. Today I opened it up and was happy until it couldn't connect to wi-fi. I googled and found that this has been an issue since july or so and that there was a patch.
The issue is that when I go the wi-fi networks it seems that it shows the checkmark to indicate that it picked it up but the wi-fi icon flickers and then after 2-5 minutes it gives me a "A connection timeout occured" issue.
I am not sure how to solve this. The patch that was issued was in July and I got this yesterday so I would think that the new ones won't have this issue. Should I still download that patch despite having bought this mac 2 months after that was issued?
Please help. Thanks!

A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Call AppleCare.
Best.

Hp split x2 not connecting with Samsung S3 bluetooth

I am unable to connect my HP split X2 with my Samsung Galaxy S3 mobile using bluetooth.
I can confirm that the items are paired but then the connection is lost.
The Samsung S3 connects with other bluetooth devices, eg Car Phone settings.
Is there any software or driver issues. i am using Windows 8.1 on a new X2?

Hello Davids2885,
Welcome to the HP Forums!
I understand you cannot connect your Split X2 to your Samsung Galaxy S3 with Bluetooth. To assist you, please try these steps:
1. Go to Device Manager. and right click on your "Bluetooth Peripheral Device".
2. Choose "Update Driver Software...".
3. Choose "Browse my computer for driver software".
4. Choose "Let me pick from a list of device drivers on my computer".
5. Choose "Ports (COM & LPT)".
6. Choose "Microsoft" at "Manufacturer" list.
7. Choose "Standard Serial over Bluetooth link".
If you are still unable to successfully pair the two devices, try the following:
1. Search for "Change device" in the Start menu (or Start screen) and select "Change device installation settings".
2. Select the "No, let me choose what to do option".
3. Check the automatically get the device app option and save your changes.
If nothing has worked so far, try the last set of steps:
1. Open Run (Windows Logo + R) and type “services.msc” and hit Enter.
2. Now find the “Bluetooth Support Service” and double click on it.
3. Click on "Log On" tab and type in "Local Service" without quotes.
4. Click on “This Account” and remove any passwords, then make sure the service is started.
Please try these steps and let me know what happens. Thanks!
Mario
I worked on behalf of HP.

Issue with Lion OSX and Samsung HDTV

Hi everyone,
I have a problem while connecting my Samsung HDTV model LNT3242HX with my Mac ever since I upgraded to Lion (I was previously on Snow Leopard).
I'm using a Macbook 2.13 GHZ Intel Core 2 Duo (Mid 2009).
I use the Mini DVI to VGA cable and I hook it up with my TV. The thing is, with Lion, when I connect my TV, it doesn't fit the whole TV screen. There's about an inch to the left and the right where the screen stays dark. I did not have this problem with Snow Leopard.
When I check in my display preferences, my resolution is set to 1360x768 , however it says Usable Resolution 1280x768...And there's no way to change the refresh rate to anything else besides 60 hertz....
I don't really know if anyone can help? As it used to work just fine before, I assume there must be some kind of glitch between OSX Lion and my HDTV. I tried hooking it up to my other LG HDTV, and there is no problem, it's just with my Samsung TV.
Thanks in advance for anyone who can help me out!

I have the exact same problem except mine is a 52 inch tv and there is at least 6 inches on either side plus 3+ inches on teh top and bottom. Wasnt an issue with Snow Leopard. I read somewhere that I may need to buy a $100 adapter instead of using the DVI to VGI cable. Any assistance would be greatly appreciated as I use this setup when I telework and the screen resolution is too small to be useful now.

Airport time capsule (spring 2014-2TB) hard drive is spinning but the LED is off and it will not connect to my MBA (mid 2013)

My airport time capsule 2TB accidentally got unplugged from the awl while in use. now you can hear and feel internal hard drive of my 2 TB spinning but all LED's won't turn on. it will not connect to my 2013 MBA or be recognized my my iPhone 5 etc. when i plug it in airport utility senses something but will not connect. please help! my entire life is on this thing.
trouble shooting thus far:
unplugged APTC 2TB & MBA
reset MBA
currently unplugged the Airport time capsule hoping to cool it off? ...

In this case the TC should be in bridge mode.
Win8 is still problematic. Try using ethernet instead of wireless. I think the drivers are poor still and it is well worth having a try via ethernet if you haven't already.
Otherwise you will need to wait for apple to release bonjour for windows 8 and airport utility.. which is not out yet.
Also make sure the windows is set to home, not work or public.. even turn off the firewall.
Open windows explorer and type the TC ip address into the address bar.. (none of which is perhaps the same.. I gave away windows at vista.. shudder)
\\TCIPadderss.

Connecting MacBook to HDTV Samsung

I am trying to connect my MacBook to my HDTV. I have purchased the mini-DVI to HDMI female cable and connected the HDMI female cable with another HDMI-HDMI cable to my television. The Mac and TV are reading each other, its just that only my background from my Mac is seen on the television. When I go to System Preferences -> to Displays there is a "Gather Windows" button that pops up, that is not present when the TV and Mac are not connected. When I push the "Gather Windows" button a window with the title "Samsung" pops up that looks very similar to the other "Display" window. I am wondering how to connect my Mac and TV so that everything from my Mac screen shows up on my TV. If I am doing something wrong, or need another cable, or anything else all help is welcomed.

Welcome to Apple Discussions!
In your Apple menu -> System Preferences -> Displays you should see two layouts of displays, one with a thick white line across the top, while the other without. The one with the thick white line across represents the display with the menubar and Dock, while the other without represents your display that doesn't have either. In this case, that should be representative of your TV. Wherever the TV rectangle is in relation to the Mac's rectangle is the assumed "position" of the desktop aligned next to the Mac. So if it is the right, you should be able to grab the titlebar of the window, and drag it over to the right hand side of the screen and have it partially appear on the TV if you keep dragging to the right. If it is some other placement, drag the window in that general direction. It may not instantly appear if your overscan settings aren't setup right. Also if you have a 1080i TV, you may need to switch to 720p resolution so that the overscan settings can be modified.

I am trying to connect my Macbook pro 2010 to my Samsung HDTV using a mini display port to hdtv cable. Trying to play a slide show in IPhoto but I only get sound with no picture. Does anyone have any suggestions?

I am trying to connect my Macbook pro 2010 to my Samsung HDTV using a mini display port to hdtv cable. Trying to play a slide show in IPhoto but I only get sound with no picture. Does anyone have any suggestions?

I keep saying this over and over, in the hope that people who do a search will find it. Apple cannot possibly test for or be reponsible for the bazillion combinations of adapter, cables, and TV's out there. The only monitors that are 100% guaranteed to work with the MacBook Pro are the Cinema Displays and Thunderbolt Displays, because, they're made by Apple. They're expensive, but they work perfectly.
My guess is that you bought a cheap MDP to HDMI cable, or have a defective one. From my reading of these boards over the past few months, cheap cables have a high failure rate. And the regular priced ones have only a slightly less of one. Try a new one. Make sure you do not damage the Thunderbolt port.

Cannot connect Samsung HDTV to Macbook pro (late 2011)

I just bought a Samsung HDTV and would like to connect it to my Macbook pro from late 2011 running lion. I have both the adapter and the hdmi cable. The hdmi cable is plugged into the tv. When I try to change the source on the tv to hdmi it says no device found. I have tried turning both the tv and laptop off and then plugging in the cable, then turning on the tv then computer. The computer does not recognize that anything is plugged into it either. When I go to system preferences: display, it does not recognize the tv.
HELP!!!!

After clicking detect displays I assume and mirroring is checked.
Try a NVRAM reset see if that helps.
Leave it connected to the TV w/TV on, power off the MBP and power it on holding the following keys:
COMMAND+OPTION+P+R hold till before the start chime and continue to hold til you hear the start chime 2 times, then release. Reboot.

My MacBook Air 13' (2013) will occasionally start the fan at full blast, not connect to any wifi or detect any wifi, and will remove the battery icon from my menu bad as well as tell me there is no battery connected. How do I fix this?

My MacBook Air 13' (2013) will occasionally start the fan at full blast, not connect to any wifi or detect any wifi, and will remove the battery icon from my menu bad as well as tell me there is no battery connected. How do I fix this? I have restarted my computer multiple times, **** it down, and ran a diagnostic test to tell me nothing is wrong and my computer is not running any applications. There is no reason for the fan to be on full blast! when I try to set the option to show my battery icon in the menu bar, it will automatically uncheck. How do I fix all of this?

Have you tried SMC and PRAM resets?
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/ht1379
Ciao.

What is needed to make the right connection from MacBook Pro to Samsung HDTV 1080p??

Using macbook pro w/Mtn Lion O/S to connect to Samsung LED ultra thin flat screen TV with DVI/HDMI cable to DMI input on TV. This connection works only for screen saver photos and not much else- no audio and no video and no mac screen output.

Using macbook pro w/Mtn Lion O/S to connect to Samsung LED ultra thin flat screen TV with DVI/HDMI cable to DMI input on TV. This connection works only for screen saver photos and not much else- no audio and no video and no mac screen output.

Samsung Omnia Mobile Phone does not connect to my MacBook Pro

Hi guys. I am after some advice please.
My Mac Book Pro is currently not allowing me to browse my Samsung Omnia phone by bluetooth.
It has worked previously however, it is not now. It recognises that the phone is there but when it comes to connecting it says "The connection failed or closed" - Would you like to attempt to reconnect or close this window?
I do not know how to get this to work and I cannot use the USB transfer wire as it is not compatible with Apple Macs.
I have some photos and files I would like to transfer over however, I cannot do so.
Any help much appreciated please.

Hi Elizaanne,
I understand you are having issues with HP Officejet 6700 Premium not connect to your Macbook Pro.
Sometimes the router needs to be cycled. I would unplug the router, turn off printer, turn off computer.
Turn back on router wait 5 min and turn on printer and computer.
Check on the printer if Wifi is SOLID.
From System Preferences, open Print and Fax or Print and Scan pane. If you see the printer listed
Click remove printer- button. It will ask for confirmation of delete printer.
Click the Add or + button, select the printer Bonjour Multifunction not Fax. Adding that should update the drivers.
If the Printer Wifi is not solid you will have to set it up again.
Press the Power button to turn on the printer.
Touch the Right Arrow to display the second navigation screen.
Touch Setup , and then touch Network .
Touch Wireless Setup Wizard
Then add it to you Mac 10.7.
I hope this helps.
Please feel free to contact me if you require further assistance.
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

MBA 2013 not connecting to samsung HDtv ?

Similar Messages

Maybe you are looking for