MBA and engery save settings

Hello,
I was wondering. Before I got my MBA I used G4 Powerbooks. In the energy save settings I could change the speed of the cpu to save energy. With my MBA this option is gone.
I was wondering if the presets of the "optimization" option on "energy saver" only change the timings of sleep and turn off screen or if they actually also slow down the cpu or even also the gpu or not at all?
cu
Daniel

Daniel Drogies:
This is fascinating reading for me; power saving strategies etc.
I am inexperienced with lap tops. I just purchased an Air for my first one. Been looking at lap tops out of the corner of my eye for fifteen years now. Never bought one though. I tell my self I was waiting for one that could full fill my expectations of what I wanted, light weight, good key board, able to use in low light environment. Maybe I just couldn't let go of the cash.
Until now!
When that little sliver of aluminum opened up and the keyboard lit up they had me; then I saw the glossy, super sharp, vibrant, screen like my iPhone I was addicted. If the dammed thing worked I had to have it.
I to was leery of the Air from reading posts here. The most recent reviews I read in online magazines have been quite positive and, as you are, I am happy with my purchase so far. Thrilled to be exact.
Steve Jobs if you are reading this: You did good ! ! ! (and of course same goes for all your teams that were involve)

Similar Messages

Will re-installing OSX and enabling Save Settings kill virus' and malwares?

Hello
My web pages are slow to load sometimes and I'm wondering if I have a virus or malware that is doing it.
I don't want to use virus checkers or malware checkers because I've heard they are themselves used by the virus writers to plant virus' and malwares.
So my question is; If I re-install OSX while enabling Save Existing Settings, will that remove any virus' and malwares if they are on my Mac?
Thanks for your help.

As there are no viruses for Mac OS X it is extremely unlikely that this is your problem, so let's concentrate on your slow page loading.
Firstly, you need a minimum of 10.5.7 (10.5.8 is better) to run Safari 4.0.3. You show you are using an earlier version of leopard.
Post back if you are not using Safari.
But to answer your direct question: just possibly, so read the following first:
No viruses that can attack OS X have so far been detected 'in the wild', i.e. in anything other than laboratory conditions.
It is possible, however, to pass on a Windows virus to another Windows user, for example through an email attachment. To prevent this all you need is the free anti-virus utility ClamXav, which you can download from:
http://www.clamxav.com/
However, the appearance of Trojans and other malware that can possibly infect a Mac seems to be growing, but is a completely different issue to viruses.
If you allow a Trojan to be installed, the user's DNS records can be modified, redirecting incoming internet traffic through the attacker's servers, where it can be hijacked and injected with malicious websites and pornographic advertisements. The trojan also installs a watchdog process that ensures the victim's (that's you!) DNS records stay modified on a minute-by-minute basis.
You can read more about how, for example, the OSX/DNSChanger Trojan works here:
http://www.f-secure.com/v-descs/trojanosxdnschanger.shtml
SecureMac has introduced a free Trojan Detection Tool for Mac OS X. It's available here:
http://macscan.securemac.com/
The DNSChanger Removal Tool detects and removes spyware targeting Mac OS X and allows users to check to see if the trojan has been installed on their computer; if it has, the software helps to identify and remove the offending file. After a system reboot, the users' DNS records will be repaired.
(Note that a 30 day trial version of MacScan can be downloaded free of charge from:
http://macscan.securemac.com/buy/
and this can perform a complete scan of your entire hard disk. After 30 days free trial the cost is $29.99. The full version permits you to scan selected files and folders only, as well as the entire hard disk. It will detect (and delete if you ask it to) all 'tracker cookies' that switch you to web sites you did not want to go to.)
A white paper has recently been published on the subject of Trojans by SubRosaSoft, available here:
http://www.macforensicslab.com/ProductsAndServices/index.php?mainpage=document_general_info&cPath=11&productsid=174
Also, beware of MacSweeper:
MacSweeper is malware that misleads users by exaggerating reports about spyware, adware or viruses on their computer. It is the first known "rogue" application for the Mac OS X operating system. The software was discovered by F-Secure, a Finland based computer security software company on January 17, 2008
http://en.wikipedia.org/wiki/MacSweeper
On June 23, 2008 this news reached Mac users:
http://www.theregister.co.uk/2008/06/23/mac_trojan/
More information on Mac security can be found here:
http://macscan.securemac.com/
The MacScan application can be downloaded from here:
http://macscan.securemac.com/buy/
You can download a 30 day trail copy which enables you to do a full scan of your hard disk. After that it costs $29.95.
More on Trojans on the Mac here:
http://www.technewsworld.com/story/63574.html?welcome=1214487119
This was published on July 25, 2008:
Attack code that exploits flaws in the net's addressing system are starting to circulate online, say security experts.
The code could be a boon to phishing gangs who redirect web users to fake bank sites and steal login details.
In light of the news net firms are being urged to apply a fix for the loop-hole before attacks by hi-tech criminals become widespread.
Net security groups say there is anecdotal evidence that small scale attacks are already happening.
Further details here: http://news.bbc.co.uk/2/hi/technology/7525206.stm
A further development was the Koobface malware that can be picked up from Facebook (already a notorious site for malware, like many other 'social networking' sites), as reported here on December 9, 2008:
http://news.bbc.co.uk/newsbeat/hi/technology/newsid_7773000/7773340.stm
You can keep up to date, particularly about malware present in some downloadable pirated software, at the Securemac site:
http://www.securemac.com/
There may be other ways of guarding against Trojans, viruses and general malware affecting the Mac, and alternatives will probably appear in the future. In the meantime the advice is: be careful where you go on the web and what you download!
If you think you may have acquired a Trojan, and you know its name, you can also locate it via the Terminal:
http://theappleblog.com/2009/04/24/mac-botnet-how-to-ensure-you-are-not-part-of- the-problem/
As to the recent 'Conficker furore' affecting Intel-powered computers, MacWorld recently had this to say:
http://www.macworld.co.uk/news/index.cfm?email&NewsID=25613
Although any content that you download has the possibility of containing malicious software, practising a bit of care will generally keep you free from the consequences of anything like the DNSChanger trojan.
1. Avoid going to suspect and untrusted Web sites, especially *********** sites.
2. Check out what you are downloading. Mac OS X asks you for you administrator password to install applications for a reason! Only download media and applications from well-known and trusted Web sites. If you think you may have downloaded suspicious files, read the installer packages and make sure they are legit. If you cannot determine if the program you downloaded is infected, do a quick Internet search and see if any other users reported issues after installing a particular program.
3. Use an antivirus program like ClamXav. If you are in the habit of downloading a lot of media and other files, it may be well worth your while to run those files through an AV application.
4. Use Mac OS X's built-in Firewalls and other security features.
5. Stop using LimeWire. LimeWire (and other peer-to-peer sharing applications) are hotbeds of potential software issues waiting to happen to your Mac. Everything from changing permissions to downloading trojans and other malicious software can be acquired from using these applications.
6. Resist the temptation to download pirated software. After the release of iWork '09 earlier this year, a Trojan was discovered circulating in pirated copies of Apple's productivity suite of applications (as well as pirated copies of Adobe's Photoshop CS4). Security professionals now believe that the botnet (from iServices) has become active. Although the potential damage range is projected to be minimal, an estimated 20,000 copies of the Trojan have been downloaded. SecureMac offer a simple and free tool for the removal of the iBotNet Trojan available here:
http://macscan.securemac.com/files/iServicesTrojanRemovalTool.dmg

WRT54G V7 Hangs on Adminstration Save Settings

Configured WRT54G connecting to ADSL modem.
1. All works fine, except, wanted to change password for admin and each time I tried and pressed save settings the device "hangs" (cannot get back to any config page) and has to be reset via the rest button. Tried this about three times with the same result.
2. Thought an update of firmware might be a starting point, but when asked for version there is no version WRT54G V7, which is what the lable underneath says. Same with product registration.

try following link for the latest firmware for the router...check whether it works for you or not and let me know...

Cant Save settings any help ?

I have a 46rv525u lcd Television and cannot save settings after changing them.I have a vision impaired son and must have the brightness turned up but soon as the set is turned off it resets to default. Same as the speakers that I want off as well.
Any advice?

Finaly I managed to save the sites to a local folder in order to follow your steps thanks!!
But, the publishing problem remains. I get an error when I do "test connection" and It says I cant connect. Tho, it managed to send the test file over to the location when i check it out at ftp.coca-cola.com (username and pasw). So I cant understand why iWeb cant connect to the server, when I can in the web browser? Im still using the same informasjon..

JPEG/PSD issue--I open a jpeg and edit it (levels, crop) and then "save as" and the save as option shows there are now levels in the image and it wants to save it as a .psd file or a copy with layers. What am I doing that has these settings appear?

JPEG/PSD issue--I open a jpeg and edit it (levels, crop) and then "save as" and the save as option shows there are now levels in the image and it wants to save it as a .psd file or a copy with layers. What am I doing that has these settings appear?

16bit? Pixels extending beyond the canvas? (from a crop with delete unused pixels turn off). Have you previously been saving PSD files?
IME you sometimes have to tell Photoshop that the first save of a session is JPG, and it remembers from there on. The way to 'tell' Photoshop that JPG, or PDF, or PNG etc are now your preferred format is to Ctrl (Cmd) click on that format in the Save As drop down list. So long as the file does not have parameters that your chosen format does not support, then this should work for you.
[EDIT] Just noticed that you did include 'Crop' in the subject line. Do you have 'Delete cropped pixels' checked?

Adobe Camera Raw Save Settings and Lens Profile Corrections Help

I have been fooling around with Adobe Camera Raw’s (ACR) ability to save settings so that I can apply them to other images. I’m able to set things such as clarity, vibrance, camera profile etc. What I want to do is enable Lens Profile Corrections and have it automatically detect the lens information for future images, apply no distortion corrections and apply vignetting and chromatic aberration corrections. However, when I try this, the Lens profile sticks on “Canon EF 24-105mm f/4 L IS USM” (which is what I used for creating the settings to be saved) regardless of the lens used for the image that I am applying the settings to. Is there a way do this?
I’m using Photoshop CS6 and ACR current version.
Thanks,
Mike

You should see an Adobe Standard profile and perhaps an ACR x.x profile for your camera, but Adobe does not make Camera-centric profiles (landscape, portrait, camera neutral, etc) for most cameras unless they are Canon DSLRs, Nikon DSLRs, one Leica and a few Pentax cameras.
On a Vista/Win7 system you can verify what models of cameras are supported by Adobe by looking for profiles in:
C:\ProgramData\Adobe\CameraRaw\CameraProfiles
The lens profiles are in:
C:\ProgramData\Adobe\CameraRaw\LensProfiles
There are comparable directories on Win XP.

How to save settings in the front panel to different files and retrieve it later?

How to save the front-panel controllers' settings to different files and retrieve it later?
What I've archived is the "Save Settings" function, but when trying to "Reload Settings", I can only retrieve the saved data to front-panel indicators, but not the controllers!
Can anybody give me some advises?
Thanks in advanced!
Charles Lu

Hi
Just write the retrieved data to a local variable (but make it writable first) or property node of the controls.
Hope this helps.
Thomas
Using LV8.0
Don't be afraid to rate a good answer...

In Keynote09, if i set custom presenter display settings (large presenter notes), and i save the file, will i see my notes in the same way on another computer? Are the presenter display setting saved in the file?

In Keynote09, if i set custom presenter display settings (large presenter notes), and i save the file, will i see my notes in the same way on another computer?
Are the presenter display setting saved in the file?
Thanks for your help!

it wont.
Presenter note display is set per machine.
Surprising nobody in this community knew this.

How can I permanently save my customized toolbars and navigation button settings? When I run Norton Utilities CleanUp, Firefox gets reset to 'factory'.

I like to clean things out on a regular basis but when I run the Norton Clean-up utility all of my custom toolbar and navigation button settings get reset to 'factory' condition. How can I permanently save these changes to my config or preference settings?

Cookies, Completed Forms, .tmp files are all that's set to be cleared. If I can identify the appropriate elements I can protect them from deletion. Does anyone know?

I have Firefox 3.6 on my Mac OSX 10.6.5 and it will not save settings for igoogle or my password for googlemail or hotmail. Can you help?

I have Firefox 3.6 on my Mac OSX 10.6.5 and it will not save settings for igoogle or my password for googlemail or hotmail. Can you help?

Very weird day in Firefoxland
First on a Powerbook G4 running 10.4.11 I respond to an invitation to upgrade to Firefox 4 (like a lot of others). Long story short, I wind up losing the browser altogether -- including all bookmarks. Why? Because neither the Firefox homepage (or CNET downloads) makes it clear that 4.0 is for OS 10.5 only! Amazing!
Then I try to register to post a reply in a thread that crits Firefox for not making this System Requirements info upfront clear. But the Register page I’m taken to (https://support.mozilla.com/bs/users/register) is in SERBO-CROATIAN!!
Then I try to log into Chat a couple of times and when it’s not CLOSED its a long line waiting and THEN it closes.
WOW!! Are the wheels off the wagon here or what!?!

Firefox 3.6.3 does not save any history, does not save passwords. I have read the forum and checked my settings (ok), started in Safe mode (still does not work).

Firefox 3.6.3 does not save history, nor passwords. I have read the forum and checked my settings in Privacy (all ok), I restarted Firefox in Safe mode (it still does not remember history or passwords). Running on XP. I think these problems started when I upgraded to 3.6.3.

I had the same problem after an upgrade to 3.6.3.
I was using password manager for a number of web sites before. Not using cookies but password manager.
After 3.6.3 auto upgrade it did not work.
I could not enter private browsing mode.
When I looked in tools>options>security at my saved passwords the list was blank. The button in the saved passwords dialog that normally says "Show saved passwords" was actually blank (the button was there but there was no text on it).
I did have my old bookmarks and was able to create new ones but oddly the bookmark all tabs menu function wouldn't work.
I decided to reinstall firefox 3.6.3. There is no way something with that many bugs got out!
I was able to get the full firefox executable from http://mozilla.com
I closed all firefox windows and ran the installation.
After re-running the install and starting firefox everything was fine. It must have been a bad download or the original install got messed up somehow.
I hope you have the same good fortune I had!

When I try open a .pdf file my Adobe Reader 11 only allows the download / save opening the related window and don't show me both options 1) open with ... and 2) save as.... probably someone flagged the choise... always perform this way ....

When I try open a .pdf file my Adobe Reader 11 only allows the download / save opening the related window and don't show me both options 1) open with ... and 2) save as.... probably someone flagged the choise... always perform this way ....
Could some one give help and let me know where I can probably find the settings option that allows me to change and switch to previous situation where it was possible to decide time to time how to proceed either opening the file or saving it ??
Thanks in advance
David

What is your operating system?
Open a PDF from where? If online, in what browser?

I have two Macs: an MBA and the new iMac. Is there a way to have iTunes and all the content in it identical on both machines?

I have two Macs: an MBA and the new iMac. Is there a way to have iTunes and all the content in it identical on both machines?

Yes you can copy the content to your new machine and use Home Sharing to keep the content identical
Connect the two machines via an ethernet cable it is 3 times faster than Wifi. Turn wifi off on one machine to enforce ethernet connection
In System Preferences, Sharing turn on File Sharing
Then
Copy the music/itunes folder from the Macbook pro to the music/ folder on the imac
Both machines should now have the same library
Disconnect H the ethernet cable
Set up Home Sharing and under Settings at the bottom of the Home Sharing page. Select to transfer new purchases.
Do the same on the other machine.
Then when you r machines are connected by wifi and each time you start itunes it will transfer your new purchases
Setting up home sharing

I just upgraded to FF 7 and now when I open Firefox none of my history or cookies have been saved. I have checked in options that Firefox will remember my history and all relevant settings but it is not doing it. Is there a problem with this on FF7?

I just upgraded to FF7 & now when I open it none of my history or cookies are saved. I have checked in options that Firefox will remember my history and all relevant settings but it is not doing it. Is there a problem with FF7?

Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
See also "Help About".
*Tap the Alt key or press F10 to show the Menu bar.
In current Firefox releases (29 and later) the orange Firefox menu button has been replaced by the three-bar Firefox Menu button at the far right end of the Navigation Toolbar and this button is always visible, whether you have the menu bar visible or hidden<br>A consequence of this location is that you no longer can hide the Navigation Toolbar
*There is a star like button next to the search bar on the Navigation Toolbar to bookmark the current web page and a "Show your bookmarks" button next to it to open the Bookmarks in a drop down menu.<br>You can find "Show All Bookmarks" to open the Bookmarks Manager (Library) at the bottom of this drop-down list
*If you bookmark a page then "Bookmark This Page" in the Bookmarks menu changes to "Edit This Bookmark"
*You can make the title bar visible via the "Title Bar" button at the bottom left in the Customize palette window
It is still possible to have the menu bar visible via the right-click context menu of a toolbar to have menus like the File menu with Print (Ctrl+P) and Print Preview and the Bookmarks menu available.
See also:
*https://support.mozilla.org/kb/how-to-make-new-firefox-look-like-old-firefox
*https://support.mozilla.org/kb/common-questions-after-updating-to-new-firefox
*https://support.mozilla.org/kb/learn-more-about-the-design-of-new-firefox

PS and AI save file rename behavior

Illustrator and Photoshop for Windows 8: save and save for web dialog file name fields will select the entire name when I start typing after placing the cursor at any point within the name. I'm only able to type one character before everything gets selected and then replaced with the second (and following) character(s) completely. This is an EXTREMELY IRRITATING way for this to behave.
If I have filename-this.png and I want to change it to filename-that.png, I want to be able to select "that" or put the cursor after the "t" and be able to type or delete as every other entry field in existence behaves.
What I end up needing to do is:
1. Place the cursor
2. Type one character
3. Wait for the entire name to get auto-selected
4. Place the cursor again
5. Start retyping the part of the name I wanted to change in the first place, finally being able to.
Infrequently saving this way is irritating but when I need to save out a handful, a bunch, or 20 files--it becomes a burden stress that I'm certain is stealing years from my life.

Hi Gail,
I have Windows 7 64-bit and don't experience this behavior. From my experience this usually occurs when using a standard user account and the UAC settings on the system.
If you are using a standard user option six here might be a long term solution
I've see http://www.sevenforums.com/tutorials/11841-run-administrator.html
It might also be an interesting test to see if you get the same behavior in a newly created admin account.
Windows 7 - http://windows.microsoft.com/en-IN/windows7/Create-a-user-account
http://social.technet.microsoft.com/wiki/contents/articles/create-a-new-user-account-in-wi ndows-7.aspx
-Dave

MBA and engery save settings

Similar Messages

Maybe you are looking for