MBA and Realplayer - no internet access

I was wondering if anyone else has had this problem. When I download realplayer 11, my internet connection stops. If i delete the program, internet comes back. Its only on my MBA. Other macs are not affected.

Yes, you are not going mad: I just had the same issue.
Downloaded the latest RealPlayer yesterday and then Airport started to fail. I did not initially make the connection (between the RealPlayer and network failures) so spent a few hours trying to diagnose the Airport issue. It also of course affected Time Machine which was connected to a Time Capsule, therefore backups were failing.
Eventually, saw your post and removed Real Player and everything is now working fine again. No idea exactly why though.
Thanks for posting.

Similar Messages

  • Cisco AnyConnect SSL VPN no split tunnel and no hairpinning internet access

    Greetings,
    I am looking to configure a Cisco ASA 5515X for Cisco AnyConnect Essentials SSL VPN where ALL SSL-VPN traffic is tunneled, no split tunneling or hairpinning on the outside interface. However users require internet access. I need to route traffic out the "trusted" or "inside" interface to another device that performs content-filtering and inspection which then egresses out to the internet from there. Typically this could be done using a route-map (which ASA's do not support) or with a VRF (again, not an option on the ASA). The default route points to the outside interface toward the internet.
    Is there no other method to force all my SSL-VPN traffic out the inside interface toward LAN subnets as needed and have another default route point toward the filtering device?
    OR 
    Am I forced to put the ASA behind the filtering device somehow?

    Hi Jim,
    You can use tunnel default route for vpn traffic:
    ASA(config)# route inside 0.0.0.0 0.0.0.0 <inside hop> tunneled
    configure mode commands/options:
      <1-255>   Distance metric for this route, default is 1
      track     Install route depending on tracked item
      tunneled  Enable the default tunnel gateway option, metric is set to 255
    This route is applicable for only vpn traffic.
    HTH,
    Shetty

  • Photosmart 7510 web services and efax no internet access

    I finally got around to setting up my printer to work wirelessly.  Everything seems to be working ok on the home network.  I was also able to use the ePrint app on my iPad to print.  But...when I select a web service or try to register for efax it tells me the printer does not have internet access.  I did a quick check on my printer to give the printer a static IP to reduce problems later. I didn't see any issues with connectivity but may not have known what to look for.  I'm not to concerned about the the web service apps but do want to get the efax working.  According to the network configuration page I printed, the printer is connected, infrastructure mode, has an IP, and I'm not using MAC filtering.  So any help would be greatly appreciated.

    Hello @BM84 ,
    Welcome to the HP forums.
    I understand that you are getting an error message from your Photosmart 7510.
    I would like to help.
    For the web services portion, you could try setting a manual DNS.
    I find Googles DNS works well with the printers.
    Primary: 8.8.8.8
    Secondary 8.8.4.4
    The following post by happytohelp01 has the steps to set this up with pictures,
    Efax 7510 still won't work after turning off/on ePrint several times
    If you still can not get the eFax to work, please check the following post by PrintApper.
    eFax users - please read
    Please call our Cloud Services at 855-785-2777.
    If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Hours:
    Mon-Fri. 8am - 11pm, Sat. 9am-8pm - EST
    Mon-Fri. 7am - 10pm, Sat. 8am-7pm - CST
    Mon-Fri. 6am - 9pm, Sat. 7am-6pm - MST
    Mon-Fri. 5am - 8pm, Sat. 6am-5pm - PST
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • IPad and PPTP VPN - Internet access (e-mail & Safari) not working

    Hi there!
    I've got an iPad2 (WiFi only) and need to configure it to use Witopia PPTP VPN, which is the VPN provider I've been using for a long time on my desktop and netbook.
    Configure the iPad was an easy task, and I was able to successfuly authenticate and establish a PPTP session with any of the Witopia servers.
    The problem is that once established the PPTP session, if the "send all traffic" option is ON, I have no Internet access at all (no e-mail neither browsing with Safari). Then, if I stop VPN, turn OFF the "send all traffic" option in the iPad, and start VPN again, I have Internet communication back and everything starts working fine. I've been fiddling with this in my home network (D-Link Dir-655 router using the IP 192.168.0.1 addressing scheme for my LAN).
    Obviously, I decided to leave the "send all traffic" option OFF, but then I discovered that doing this my Safari traffic is not encrypted and my IP is not masked, i.e. the VPN is up and running, I have normal Internet traffic, but the service to be provided by the VPN for some inknown reason is not happening.
    Does anyone have a clue about what's going on ?
    TIA
    RTadeu

    Have you tried a battery pull?  If not, give that a try and then try again. 
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • TS1398 Purchased new iPad and have no Internet access.  I purchased a plan for a hot spot but when I try to do any type of search it says not connected.  I have connectivity with my phone with the same carrier. Help

    I purchased a new iPad and bought a wireless plan with Verizon but can not get the settings to connect or look for a wifi connection.  I can connect to our house wifi but it will not connect on its own. Any help would be appreciated.

    Hello there, NapaJohn.
    The following Knowledge Base article provides some great steps and information that should prove useful on troubleshooting personal hotspot:
    iOS: Troubleshooting Personal Hotspot
    http://support.apple.com/kb/TS2756
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • JetPack 4G LTE connects but "no internet access" message

    Would appreciate any help.
    My JetPack 4G LTE mi-fi connects to the internet (3G or 4G) and shows that my devices are connected to it.  However, I cannot get on the internet.
    1)  I have three different devices - two laptops and a smartphone.  All three have the same problem.
    2)  I have a Sprint Mi-Fi that I use for a different business.  All three devices can and do connect to that device and work properly on the internet during the same sessions in which they cannot connect on the Verizon JetPack.  So it is not the devices I am trying to connect with.
    3)  The exact same thing has happened several times over the course of about 4 days and in two cities and two states - all three devices unable to connect via JetPack but connect fine through Sprint Mi-Fi.  So it is not location or local network issue.
    4)  LED display on JetPack, in all instances, show a strong 3G or 4G (depending on where I am) signal and also that all three devices are connected.
    5)  Message on laptop wireless area shows connection but says "no internet access".
    6)  Under the wireless status or details, it says (on the list of info):  "IPv4  no internet access" and "IPv6 no internet access".
    7)  I have done a battery pull with no effect.
    8)  I have done a factory reset (power up, remove cover, press reset button until long green light and short green light) with no effect.
    9)  After both battery pull and factory reset, I still show connected to 3G, all three devices connected, no internet access, and all three devices then work on the Sprint mi-fi.
    10)  Symptoms started about 4 days ago and have not changed since - it is not a come-and-go problem.  It is not working at any time.
    I am hoping to gosh to avoid a long ordeal with tech-support at Verizon.  This is a company-issued device, so I could ask my company to take it up with Verizon, but I work remotely and access to the IT department is not that simple either.  thought I would see if I am missing something simple.  I hope I've given enough info for someone brighter than myself here can spot something I could do.
    Thanks in advance for any help.

    Thank you for your response.  I am having trouble logging back into this site to respond (I never created a User ID and don't know my cell phone number as it is a mi-fi and not a cell).  I reregisterd for the forums only under a slight ID variation and will continue to do so for this dialog.  Thanks very much.
    The back of the Jetpack says SSID: "MiFI4620L Jetpack 89B4".   I am currently using the device (since the problems began last week) in zip codes 49504 and 49503 - same symptom both places.
    Thanks again.

  • No Internet Access on Private Network

    Hi,
    I have an and ESXi Host with few VM's and i require Internet Access on these servers. This is Mini lab i have created at home.
    I have My Home Broadband Router (192.168.0.1) acting as a DHCP server handing out DHCP addresses as usual.
    A Cisco 3750 with 3 Vlans created with inter vlan working with the "Ip Routing" command.
    A Physical PC
    A ESXi Host
    3 Vlans:
    Vlan 100               10.0.9.1/24          (Home Vlan)          Created DHCP Pool on this Vlan on 3750
    Vlan 200               10.0.10.1/24        (Voice Vlan)           Created DHCP Pool on this Vlan on 3750
    Vlan 300               192.168.0.2/24     (Internet Vlan)        DHCP handing out IP's from home broadband router (Uplink setup from Home ADSL router)
    3750 Switch:
    Port 1                    ESXi Trunk
    Port 2                    Home PC (Vlan 100)
    Port 3 – 28             Vlan 300 and all giving DHCP addresses from home ADSL router
    Home PC (Vlan 100   –   IP Address 10.0.9.52)
    From Command Prompt PC can ping the following:
    10.0.9.1                (Gateway)                                                        Ping Ok!!!!!
    10.0.9.2                (ESX Host)                                                       Ping Ok!!!!!
    10.0.10.1              (Gateway for Voice Vlan 200)                             Ping Ok!!!!!
    192.168.0.2          (Gateway for Internet Vlan 300)                           Ping Ok!!!!!
    192.168.0.1          (Home Router & DNS)                                        No Ping…..
    Cisco 3750 Switch
    This can ping the following:
    10.0.9.1                (Gateway)                                                         Ping Ok!!!!!
    10.0.9.2                (ESX Host)                                                        Ping Ok!!!!!
    10.0.10.1              (Gateway for Voice Vlan 200)                              Ping Ok!!!!!
    192.168.0.2          (Gateway for Internet Vlan 300)                            Ping Ok!!!!!
    192.168.0.1          (Sky router & DNS)                                             Ping OK!!!!!
    My assumtion is if i have these settings on my home PC:
    IP Address     10.0.9.55
    S/M               255.255.255.0
    Gateway        10.0.9.1
    DNS Server:     192.168.0.1 (Home Router)
    i should get internet access on my 10.0.9.1/24 network.
    IP routing is enabled and inter Vlan is working correctly. The issue I have is I have no internet connectivity on Vlan 100 (10.0.9.1/24) from my desktop PC or any of my VM's on the 10.0.9.1/24 network and internet seems to be working fine on any device in vlan 300.
    I have added my Running Config an attachment to give you a better understanding.
    Please can someone find i solution as i desperately require internet access on my VM's but they need to stay on the 10.x.x.x subet due to CUCM licensing.
    Kind Regards
    Zubair

    Hi,
    It sounds to me like the home router (192.168.0.1) doesnt have a route back to your 10.0.9.0/24 and 10.0.10.0/24 networks.
    Can you try a source ping from your 3750 switch as follows
    ping 192.168.0.1 source 10.0.9.1
    If this fails you will need to add static routes on the home router for the above networks with a next-hop of your 3750 192.168.0.2

  • Enterprise Manager in secure environment with no internet access

    I have Oracle 11g installed in a secure isolated environment, which means there is limited access to the servers, and definitely no internet access from that environment.
    I am looking to configure Enterprise Manager / Database control.
    I can successfully start up the application server on my database server, and connect to this from a web browser within my secure environment.
    However when I try to display the Performance tab, nothing is displayed.
    I understand this screen uses an ActivX component.
    Is the use of the ActivX component going to have problems because my servers have no direct internet access, or should this not make any difference?
    Thanks
    Paul Graves

    No this is not going to make any difference.
    You don't need any internet connection at all for working with OEM GC.
    Maybe, if you want to configure the Patch Setup to receive Patch Adviories from My Oracle Support, but even then you can do without a connection from you server(s) to the internet.
    Asuming that you are using OEM GC 10.2.0.5, you will also be needing the installation of Flash Player and Adobe SVG Plugin, both to be installed in your browser.
    Kind regards
    Rob
    For more information on working with OEM GC, you might want to check http://oemgc.wordpress.com

  • I am using a verizion jetpack to wireless connect to an airport express next i want to connect a Airport extreme wired from toe express to create a second private network that has internet access via the jetpack

    Thanks for the help after looking over your sugesstion I did some additional troubleshooting which i should have done in the beginning and heres what i found
    Airport express is joined to and existing wireless network and i have internet access....all good
    I set up my Airport Extreme as follows:
                        Connect using :ethernet
                  Ethernet Wan Port : automatic
                  Connetion Sharing : Share a public IP address
    Tcpip      Configue IPv4: Using DHCP
    DHCP                   Begin address: 172.16.22.200
                               Ending address:  172.16.22.254
    Wireless    Create a wireless network
                             Wireless network name Test1
                              wpa2 security
    This is needed due to set ip address of device on this private network did not address NAT
    Conneted Express ethernet port to Extreme wan port
    All wired devices have internet access and i get a double nat status which ignore
    however my wireless device will not connect.... sometimes they will they want
    any suggestions

    Here are sceeen shots of the Express

  • No internet access on laptop

    Hi
    I have wireless network connection on my home pc and laptop but only have internet access on my home pc I cannot get internet access on my laptop. When I run the trouble shooting program and the diagnostic program on my laptop it says that the broadband modem is experiencing connectivity issues  and I have to turn off the modem and reset, which i have done and still no internet access on laptop. Any ideas on what else I can do, my husband has the same problem on his laptop as well. It has always worked before, this problem only happened a couple of days ago. 
    Please advise, thanks
    Solved!
    Go to Solution.

    Do you have BT Netprotect (McAfee) installed on the laptop?
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • SoundBlaster X-Fi drivers corrupt or not working "properly" without Internet access. Please fix!

    The latest drivers located here are corrupt. It is a single exe file that does a CRC check before install begins. During this self check, it fails and stops extracting the files. As such I can not install the drivers. Now, I can probably even tell you why this happens. First I will start by saying that the install only fails on a system with no Internet access. Why so? Because if it has internet access, it updates/checks the digital certificate online. This is not good or acceptable for me as I install the drivers on offline systems and also even on my main Windows 7 setup, I multi-boot and have Windows XP on it too. When I initially install everything the first time, I do not start by first allowing internet access. No sir. That comes last. The first two things after the motherboard chipset drivers are the audio and GPU drivers. Then, a few other important things and then my security suite and then, finally, internet access. That's just normal.
    Since this only happens to the driver file that supports Windows 8 (and all previous versions of Windows) and not the Windows 7 (and all previous versions of Windows) file, it's an issue that should be fixable. You may think it's not worth fixing, but I assume that this will truly be the last driver for the X-Fi card, and as such, can we please end it's life cycle with a driver that works on any O/S that it still supports?
    Notes:
    This issue only happens with the Windows 8 (latest) drivers. This does not happen with the previous (or any before) drivers. So this tells me it's an issue that could be resolved. Please check the digital signature settings on the Windows 8 drivers. Again, all other drivers work just fine on Windows XP with no internet. This issue only exists for the Windows 8 driver executable.
    The driver file is not altered or corrupt. The digital signature only fails if it can not access the Internet, or perhaps a newer Windows that has updated root certificates. (ie: Win7)
    Pictorial situation:

    Don't you care Creative? Don't you care? /use Peter Griffin voice when reading.

  • Mac G5 Airport "NO internet Access" but is connected to WRT54G network

    I have read thru prior threads and nothing has worked. I have connected to the internet once. I have upgraded the firmware to the wrt54. I have tried both PPPoe and DCHP to connect as well as using the built in ethernet. Why will it connect to the network but have no internet access?
    The network status on my G5 says "Airport connected and You have internet access through Airport. But when I try through Safari, the screen comes up "no internet connection". Currently my wrt54 is 192.168.2.1 and I have set the security to allow access to the router. Can someone layout what my mac and router settings should be, If they are working for them? After trying somemany different things, I worry that I am not trying the right sequence of settings anymore. Help!
    Many thanks!

    I have upgraded my router firmware to the latest, at least what is available here at linksys. The airport does retrieve the address from the router, but no go. Should it be set to PPPoe or not? If it isn't. it doesn't look for the host. When its off, the network status says connected to the linksys network, internet access through Airport, but still no Safari. I don't understand, if it is connected to the network, what is preventing it from connecting to the internet, which is available on the router? My DHCP server is enabled, I have changed the address to 192.168.2.1, 50 clients, but there are no DNS static address'. Should I input some DNS Address? My router is connected to a DSL modem and hardwired to a PC through the net connection. This is how I access the router. Whoops gotta get to work...........
    Thanks for your help

  • Does InDesign CS6 require internet access for volume license validation

    Our purchasing team supplied me with a volume licnsed version of InDesign CS6 and it requires internet access to validate the license.We operate in a VDI environment without internet access.
    If i try to use the AdobeApplicationManagerEnterpriseEdition tool to customize the app it will not recognise the serial key..? if i manually launch the Setup.exe it does..?
    Thanks
    gary

    Yes , the internet access is required to use the Adobe software but we do understand in secure enviornment it is not possible.
    Hence , you can create a deployment package using AAMEE on a internet enabled computer and then use the package to install the cs6 software on the computer without internet computer.
    Make sure you use AAMEE 3.0 as it will only work with CS6.

  • Have a static IP for internet access - how do I replace my Linksys wireless router with Time Capsule?

    Have 5 macs on an ethernet network - some wired and some wireless to a Linksys router.  My provider uses static IP and DSL for internet access.  I am replacing an existing Linksys router with the Time Capsule.  The Static IP settings I have are IP address, Gateway, Mask, primary DNS and secondary DNS.  The Airport Utility is not as straight forward as the Linksys setup.  There is not a place to list gateway.  Consequently I am unable to connect to the internet and am back on the Linksys router until I get this resolved.  Any suggestions would be much appreciated !

    You enter the static public IP address info on the TCP/IP tab within the Airport Utility. For a static address, use Configure IPv4 = Manually. You use the Router field for the Gateway address.

  • Ethernet cable internet access only No WiFi in hotel MBA user

    Am assuming I need to carry my own Airport Express with my MBA as I am in a hotel that has ethernet cable internet access only - no WIFI? If so, what do I need to know about how to get MBA and Airport Express to "talk" to each other in these types of hotel situations?
    Thanks for your assistance
    PEM

    Hi Elegba,
    Curious... did you consider the USB Ethernet adapter for the MacBook Air? A whole lot cheaper of a solution for a hotel without WiFi. Not to mention, I've found (after initially struggling to justify the purchase) that I use mine more than I originally thought.
    However, to answer your question. You'll connect the Ethernet to the AirPort Express Base Station and configure it via the AirPort Utility on your MacBook Air. It's very straight-forward and you'll be creating a wireless network. You may need to first get setup with your 'in room' connection, though, I know most hotels have a proxy connection for web access. While you should still be able to setup the Express, it's just something to keep in mind.

Maybe you are looking for

  • System Error 400

    Hi all, I have a problem with my Nokia N95 8GB. Basically I don't seem to be able to upload photos to my Ovi album anymore. When I try to do this it tries to scale the photo and then after a few seconds I get the message 'system error 400' or somethi

  • Change in file/folder arrangement of data disks?

    I periodically burn data DVDs of new additions to my iTunes library as a backup. I make a playlist of the music, then sort by album and burn as data disks. Previously, the DVD was arranged like this: 01 First Album Name ..01 First Song Name ..02 Seco

  • Onetime vendor - address is not copied into the purchase order ME21N

    Dear all, I have a issue about using onetime vendors, if I have entered a dummy address on the onetime vendor, this address is not copied into the prucase order when I create a PO for this vendor type. My problem is that we want to use the ME59 to cr

  • Pie chart from Largest slice of another pie chart.

    Greetings! I'm trying to come up with a method which will allow me to create a pie chart of the subgroups from the largest slice of an existing pie chart. The "parent" pie chart will change depending upon the parameters given in the report. declare @

  • Trigger IDoc when outbound documents are deleted

    Hi Experts, I am working on a scenario where in when delivery document is deleted then we need to have a IDoc to be triggered and sent to the receiver. I understand that when we create/change delivery, there is a way to trigger IDoc (i.e., through me