MBA battery does not charge when connected. Help!

My MBA battery does not charge when connected to the charger. Ive checked the other threads and followed advice but nothing seems to help.. My battery health info is good, I've tried cleaning the magnetic pins of the charger, reset smc but it still does not charge. The light on the charger is green or does not come on sometimes, and it's the same for a few Power outlets. What else can I do? Would greatly appreciate any help! Thanks.

It recognizes the charger intermittently. After cleaning, it showed the charger as connected but not charging the battery. I will try my friends charger later to see if it works. Thanks for your help!

Similar Messages

My new ipod 6th generation doesn't appear on itunes and does not charge when connecting to iMac...Any suggestions?

My new ipod 6th generation doesn't appear on itunes and does not charge when connecting to iMac...Any suggestions

If you have a PPC iMac, see KB Article: http://docs.info.apple.com/article.html?artnum=301733 iMac G5: How to Reset the SMU (iMac G5, the iMac G5 (Ambient Light Sensor), and the iMac G5 (iSight)).
Intel iMac, see KB Article: http://support.apple.com/kb/HT3964 Intel-based Macs: Resetting the System Management Controller (SMC)
Your iPod is "new" & still under warranty.
Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase. If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for two years from the original purchase date of your iPod.
Or, take your iPod Nano to your local Apple Store or AASP.

Battery does not charge when asleep

Ever since I upgraded to Tiger my PowerBook battery does not charge when it is asleep and the display is closed. It only charges when the computer is active and display is up. Anyone else experiencing this? Solutions/work arounds??

Hi, Donald. Try resetting your Power Manager, and you might also trash the preference file com.apple.PowerManagement.plist. If you trash the pref file, be sure to restart and reset your preferred Energy Saver settings afterward.

Battery does not charge when plugged in

Battery of my i phone 5 does not charge when plugged in!

Hi
Try this:
Disconnect AC
Shutdown
Remove battery
Connect AC
Startup
Open Device Manager
Click the plus (+) sign next to Batteries category, right-click All of the "Microsoft ACPI Compliant Control Method Battery" listings, and select Uninstall In the "Confirm Device Uninstall" dialog box, click OK. (it’s ok if you only have 1 of these listings).
Click the plus (+) sign next to System Devices.
Right-click the “ACPI Fixed Features Button" and select Uninstall. In the "Confirm Device Uninstall" dialog box, click OK.
Shutdown
Disconnect AC
Insert battery
Connect AC
Startup
Also request you to try updating the Bios once on your unit.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Battery does not charge when my Satelite Pro L500 is off

Hi.
I have a Satelite Pro L500. Normally when it is plugged in the DC in and Battery led lights are lit up. Now both are off when it is plugged in and the computer is off. I have found that in this state the battery is not charged. The computer will not switch on while the power is plugged in. If I remove the power source and wait a few mins the computer will now switch on and opperate normally.
If I now plug in the power the leds are lit and the battery is charged

Hm. You mean the notebook does not boot up when AC adaptor is connected but it powers up if the AC adaptor is not connected?
Looks like an hardware issue maybe power supply electronic problem
Of course the AC adaptor should be checked too
L500 is not a very old notebook series and I think the warranty should still be valid
In such case everything should be covered by warranty so dont loose the time and get in contact with an ASP technician

Macbook Pro-battery does not charge when on standby

Funny thing, I discharged my battery recently and when I plugged my power adaptor I put the computer to hibernation. When I opened the screen the charge was still 15%, same as b4 hibernating. The computer would not charge the battery whenever I close the screen and the problem remains. Anyone had similar problems?

This isn't a normal behavior. Have you verify if the magsafe adaptor was properly connected, i.e. that the amber-LED was on?

Fully depleted battery does not charge when BlackBerry 10 smartphone is connected to charger or usb

HI
I have a BB Z10, two days ago while travelling the battery got fully depleted and the phone got turned off. later I connected to the BB charger and the phone wouldn't charge, I tried to connect it to USB but it still wont charge.. just the constant blink of red light. I tried to remove the battery for 2 hours and plugged it back and no luck there. As I need my phone working, I tried to go to a service center but not able to locate the one listed on the BB website, I bought a new
BB Z10 battery and it worked fine. I went back to my place and it took about 1 hour for me and again the battery had discharged and I am with the same problem now. Now when I connect my Z10 to the computer (windows 8.1) I get a red+green slow blinking light and after say 20 minutes it connects to the computer and the phone get switched on... and when I see the phone it says Ëxiting battery saving mode""immediately followed by "turning off device" and the it loops endlessly.
Please help!!!
Solved!
Go to Solution.

You need to use a known working wall outlet, not a USB cable to the PC, as a PC USB outlet normally doesn't have the charging amperage of a wall outlet.
So, connected to the wall outlet, leave it several hours. Then, still connected to the wall outlet, remove the battery a minute and reinsert to reboot.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Ipad (first generation) Battery does not charge. Need help

I tried Mac, pc and electric sockets; doesn't work. Same ports and cable I can use to charge my iPhone 4, so I know that cables and USB ports that I tried are OK.
I have 20% batter left. If I turn Ipad off and connected it to the USB cable, the Ipad automatically turns on but still doesn't charge. Also, I the iPad is not getting detected by the iTunes.
Does it mean that my iPad battery is dead?

Try a Reset - (For those who do not know, hold the Home and Sleep/Wake buttons down together for 15 seconds.) even do it a couple of times.
I am a little confused as to when you see or do not see the battery symbol etc etc. You mentioned a 20% battery strength and if that still applies then the following comment would be of little relevance (it may take completely drained batteries 20 minutes or more to indicate that they're actually charging).
As to the iPad not showing up in iTunes, try a different USB port, even a number of times.

HT4972 hi. my iphone 3gs was stuck on apple logo, does not charging. when i replace the battery, it works, my promblem not is, in can't or won't read the simcard. i cant activate my phone. even i put att simcard. how can i activate it? please help me. tha

hi. my iphone 3gs was stuck on apple logo, does not charging. when i replace the battery, it works, my promblem not is, in can't or won't read the simcard. i cant activate my phone. even i put att simcard. how can i activate it? please help me. thanks.

Apple recommends backing up the data when you're getting the battery replaced by them. So I assume that you will likely lose the data during this process.
Will the data on my iPhone be preserved?
No, during the service process all data on your iPhone will be erased. Before obtaining service, it is important to back up your data using iCloud or iTunes. Apple is not responsible for the loss of information while servicing your iPhone and does not offer any data transfer service. During service, Apple may exchange your iPhone with an iPhone that is new or equivalent to new in performance and reliability.
Following service, your iPhone may have a newer operating system (iOS) version and you will need torestore your data using the method used to back it up (iCloud or iTunes). As a result, you may also need to update your App Store applications to ensure compatibility with the newer iOS. If you experience a problem with an application purchased from the App Store, check to see if an update is available or contact the application vendor directly.
copied from Apple - Support - Service Answer Center

My pavilion dv4-5113cl battery does not charge.

I bought my dv4 from a friend and he told the only problem with the laptop is that the battery does not charge. When you place the curser on battery icon on the task bar it reads "0% available (plug in, charging)" this will be there for hours! And the battery will still be 0%. Imidiatelu you take the charger off the laptop goes off. Pls what can I do help me.

Hi
Try this:
Disconnect AC
Shutdown
Remove battery
Connect AC
Startup
Open Device Manager
Click the plus (+) sign next to Batteries category, right-click All of the "Microsoft ACPI Compliant Control Method Battery" listings, and select Uninstall In the "Confirm Device Uninstall" dialog box, click OK. (it’s ok if you only have 1 of these listings).
Click the plus (+) sign next to System Devices.
Right-click the “ACPI Fixed Features Button" and select Uninstall. In the "Confirm Device Uninstall" dialog box, click OK.
Shutdown
Disconnect AC
Insert battery
Connect AC
Startup
Also request you to try updating the Bios once on your unit.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Battery Icon Shows "18% available (plugged in, charging)" But Battery Does Not Charge

The PC does operate on the battery only, just fine (so far, as there is only 18% remaining).
The PC operates with AC plugged in also.
LED by AC input is amber (looks orange to me).
According to the User Guide that indicates charging.
Battery Check status is "OK"
I have had it on charge for over 12 hours and still at 18%.
When starting up, the battery icon shows charging movement then stops at a low level.
I measured the charger output at 20VDC (no load). Which is as specified.
I have tried all the suggestions about uninstalling and reinstalling the ACPI Complient Control Method.......etc.
Removing battery, shutting down and all the rest of suggestions.
No help.
I was told there was a BIOS update which I installed. (I'll post about that in another board). No help.
If I ever get this fixed it's going back to the vendor, Should not have this happen with less than 3 months since new.
Just got it back from repair for battery latch falling off. (Back plate was changed.)
Anything new would be appreciated.

Hi @xdellman,
Thank you for your query and realize how frustrating this is.
I gathered from your post you have tried most of the troubleshooting steps to no avail.
If you check the adapter do you notice any damaged or bent pins as this can cause charging issues?
Here are two links that may also assist you.
HP ENVY and Pavilion Notebook PCs - Battery Does Not Charge
HP Notebook PCs - Testing and Calibrating the Battery (Windows 8)
If this has not helped please contact HP support for assistance.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Please let me know the results.
Best of Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Is there a settings in Win7/HP feature that the battery does not charge until it is under 95%

I just purchased a HP Pavilion dv6-7043cl laptop and have noticed that the battery does not charge unless it is below 95%. I am very concercerned because I had a different laptop from a different manufacturer where I had battery issues. That manufacturer was not helpful and I will never buy from them again.
I have heard good things about HP which is why I decided to buy this particular machine. However, I have only had this machine for 3 days and now this is starting. I cannot find a Win 7 (I am running Win 7 home premuim 64 bit) setting that controls when the battery starts to charge. Is this a function of the HP Power Manager? Is this a feature of the battery HP ships with their laptops? Or is this indicating a problem with this machine? I am a college student and I need a reliable laptop for school.
Any information you can provide is greatly appreciated.
Thanks,
HanNan
This question was solved.
View Solution.

Hi,
This feature is intended by design in order to reduce unecessary charge/recharge cycles - reference to this can be found in the 5th paragragh in the document below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00287805&cc=us&dlc=en&lc=en
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Battery does not charge while plugged in

My computer is plugged into the charger and does not lose power while plugged in, however, it does not charge either. It currently sits at 63% power and says "Battery is not charging" when I mouse over the battery icon and verifies that it is plugged into the power adapter. Basically the problem is that it doesn't lose power when its charged in, but the battery isn't recharging either. The light on the charger isn't lighting up either, however, I've verified that its the computer's problem by plugging my charger into my roommates identical laptop. Any idea what the issue is? Thanks everyone.

I also have this problem with my Mid-2007 MBP.
I have reset the SMC to no avail.
I've noticed that if my battery appears to be charging (albeit slowly) and then I try to play World of Warcraft, it switches to "Not Charging" once the fans startup.
I just had it serviced and they replaced the logic board 1 wk ago and then I upgraded to Snow Leopard. Could any of this have an effect?
Battery health is fine as far as I can tell (below is the info from system profiler).
Battery Information:
Model Information:
Manufacturer: SMP
Device name: ASMB014
Pack Lot Code: 0002
PCB Lot Code: 0000
Firmware Version: 0110
Hardware Revision: 0500
Cell Revision: 0102
Charge Information:
Charge remaining (mAh): 1821
Fully charged: No
Charging: Yes
Full charge capacity (mAh): 6016
Health Information:
Cycle count: 125
Condition: Normal
Battery Installed: Yes
Amperage (mA): 1554
Voltage (mV): 11104
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 15
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 8
Automatic Restart On Power Loss: Yes
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: No
Current Power Source: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 5
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 1
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
ID: 0x0100
Wattage (W): 60
Revision: 0x0000
Family: 0x00ba
Serial Number: 0x00240f33
Charging: Yes

My battery does not charge, the battery is okay but no charging functionality

i have a g60 laptop, I think it is US120 model, It should be registered to me. When the AC charger is on it does not detect it and the battery does not charge. The battery got lower and lower and now it will not start. It also will not run without the batter in it and without charge in the battery. Any ideas_?

It sounds like your adaptor may have died. Here is a link that you can find information for troubleshooting your adaptor.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00363266&tmp_task=solveCategory&cc=us&dlc=en&la...
If I have been helpful, a Kudo is always appreciated.

My hp deskjet 1510 series does not print when connected to my hplap top (windows Vista),

My hp deskjet 1510 series does not print when connected to my hp lap top (windows Vista), it says the printer is not active, although it is default printer, connected and on. However, it does work when connected to the (also HP) lap top (windows 8) of my husband. I did everything the hp print and scan doctor advised and also what I could find at HP support (like switch of fire walls, reinstall everything, check printpooler ec etc)... it still does nothing except that I managed to print a diagnostic print which should give information about the condition, but it only gives numbers and letters like : 11. SN = [Edited for Personal Information] Yr 12 PER = 05YR etc, that does not really help me :-). It won't print any testpages. H E L P!!!

Hello Elisabeeth,
Welcome to the HP Forums!
I understand you're unable to print using the Deskjet 1510. I will do my best to assist you! When you reinstall the HP software, did the installation state it was complete?
I would start off by following this HP document on 'Printer is offline' Message Displays on the Computer and the Printer Will Not Print. From this document, please make sure you check the connection type and the ports.
Please post your results, as I will be looking forward to hearing from you.
I worked on behalf of HP.

MBA battery does not charge when connected. Help!

Similar Messages

Maybe you are looking for