Mba late 2011 fan issue

Having bought the MBA13  1.8 Ghz I7 , notice the fan is constantly runing even no major App  like Iphoto or Aperture is on. Using Safari only. Istat 3 is getting me following values: User 1% System 2% Idle 97%  Threads 398 Processs 84 temp CPU A 72  CPU 2 69 CPU 3 64 Proxmity 59 Apple SSID 46  Fan Exhaust 5990 rpm  Using Istat3  .  Any Ideas?

Check this thread as well:
https://discussions.apple.com/thread/3336420?start=0&tstart=0

Similar Messages

  • Macbook Pro (Late 2011 model issue)

    I purchased my Macbook pro (late 2011 Model) a couple of months back, towards the end of last year. Staright after i had purchased it, and had got it delivered i experienced cracking and clicking noises coming from within the Hinge of the Macbook. And got it replaced for a brand new one as i was still within the 2 weeks prior to purchase, as the apple policy states i was eligible to get a new if i had any problems. So i did. And the brand new replacement macbook pro that i have NOW has the same problem. Ever since i got the other one replaced THIS ONE has the problem or rather much worse, Cracking and clicking noises everywhere whenever i handle the notebook or carry it there is cracking noises everywhere. Whenever i open and close the screen lid, UP or Down. There is loud clicking noises coming from inside, sounds like something is breaking. This is totally unacceptable. First macbook had issue, replaced it, And now replaced Macbook pro is much worse. Since i had it replaced i havent had time to come bring it in. It still bears the same preoblem and is getting worse!

    You're just going to have to take it into your local Apple Store. They won't replace again but you're still within your one-year warranty so they will certainly repair. I have the same model and have not have any of the problems that you describe.
    Regards,
    Clinton

  • Macbook Pro late 2011 WiFi issues

    Hey guys and gals,
    I've been having some issues with my late 2011 Macbook Pro 17 inch. It has been loading webpages very slowly on some occasions. About 50-60% of the time it runs almost perfectly, but sometimes it just starts loadaing various websites very slowly and can take up to 5-10 mins to load something ir it may not even load it at all. The weird thing is, it goes back to working normally after a few mins. It also loads .gif images sowly most of the time or it may play them frame by frame and then freeze them, where as my dads 2009 Macbook Pro 17 inch loads them instantly and perfectly.
    I thought it was just a problem with my internet so I had them check my line and give me a new router. The line was fine and the router has a slightly better signal than my last one but the problem is still there. My Dads Macbook Pro doesn't seem to encounter the same problem even though I've been using it all day flawlessley.
    What could be causing it? What might the solution be? Any help is greatly appreciated.
    Jamie.

    Some users with various Wi-Fi connection problems have reported that they were given the following instructions by Apple Support, sometimes with success. I can't vouch for this procedure myself. After completing the procedure, you'll have to recreate all your settings in the Network preference pane. Make sure you know how to do that before you begin. Taking screenshots of the preference pane may be helpful.
    Step 1
    Back up all data.
    Triple-click the line below on this page to select it:
    /Library/Preferences/SystemConfiguration
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
    Step 2
    Reset the System Management Controller

  • MacBook pro 15 late 2011 video issue

    When will Apple recognize the problem with the video on the MacBook Pro late 2011?
    I have found in many forums and newsletters people who have the same problem? 800 euros to repair a MacBook, which is not even 3 years old, has cost more than 2,500 euros is not normal. As I said, many customer have this problem. I wait 80 minutes on the phone and then get the message that problem exists but you can not do anything is not very customer friendly.
    I'm shocked.I hope Apple is very fast in the sense of its loyal customers.

    Since this is a user to user forum with no employees participation, your plea is a good a screaming into the wilderness.  I suggest that you post your thoughts here:
    https://www.apple.com/feedback/

  • 15"MBP(late 2011): Bootcamp Issue - Black screen on reboot

    Hi,
    Im running into this issue that I can't fix no matter what I do.
    I run bootcamp assistant to attempt to install windows 7 (even though I tried with win xp and another win 7 dvd with the same result) when I click "Start Installation" and my computer reboots it goes straight to a black screen with a blinking cursor at the top left and then nothing. I've left it for hours and nothing happens.
    I searched for people who had a similar issue and tried what they've suggested. I've tried fixing the drive in disk utility, removing the windows partiton and creating it again, reseting the smc, reseting the pram and still I get the black screen.
    Im am using an external optical drive.
    I hope somebody can help me.
    Thanks,
    Atanas

    If Boot Camp Assistant won’t open because you haven’t updated your firmware or system software Boot Camp requires that you have Mac OS X v10.5 or later, and the latest firmware, installed on your computer. Some computers may require more than one firmware update.
    To update your computer’s system software:
    1 From the Apple menu, choose Software Update. 2 If an update for Mac OS X appears in the list, select it. 3 Click Install.
    To update your computer’s firmware:
    1 Go to www.apple.com/support/downloads. 2 Search for the firmware updates for your computer.
    For example, search for “Mac mini firmware update.”
    Important: Some computers may require more than one firmware update. See docs.info.apple.com/article.html?artnum=303880 for the current updates available for your computer.
    3 Download all applicable firmware update packages. 4 Open each package and follow the onscreen instructions.
    Hope this Helps!

  • Macbook pro late 2011 fan run permanently 6200

    hi, i have a problem with my fan, its run permanently in 6200 how can i fix this ...

    Run an Apple Hardware Test:
    http://support.apple.com/kb/ht1509
    Open Activity Monitor and set it to show ALL PROCESSES and set % CPU to display values from high to low.  When the fans run fast, post an Image like this from mine:
    Ciao.

  • Macbook Pro Late 2011 13 Inch Fan Not Spinning?

    Hello. I have had my macbook pro (13 inch late 2011) since January of 2012. It has worked great, until now. It has been getting very hot and iStat Pro says that I'm running CPU at 191 idle. Also, the exhaust fan, also the only fan, is at 0 RPM. Can anyone help me out and tell me why my fan won't spin?

    We're not Apple, just end-users like you. You'll need to get a quote from an Apple Store or Apple Authorized Service Provider.
    The fan would be the cheapest fix I believe. This site shows not too complicated steps to access to replace a fan in your model:
    http://www.ifixit.com/Guide/Installing+MacBook+Pro+13-Inch+Unibody+Late+2011+Fan /7654/1
    The site makes no mention however of replacing a sensor.

  • Late 2011 MacBook Pro 13" noisy fan.

    Hi everyone, about a month ago I purchased my MacBook Pro 13" Late 2011. Some info about it:
    OS X 10.9.4
    2.4 GHz Intel Core i5
    4 GB Ram
    Intel HD Graphics 3000 384 MB
    Anyway, from when i bought it, there was no issue with the fan, but recently, from about a weak, the fan is a bit noisy even when I am not running any programs. I vacuumed the vents in hope of removing dust, didn't work. I also did a reset which I was advised to do. Turn of the mac, hold SHIFT + CTRL + OPTION + POWER BUTTON at the same time and release at the same thing (while the laptop is charging) then turn it on. It also did not help. Any other recommendations will be appreciated.. Thank you.

    Not possible. The screen, glass cover and aluminum housing are sealed, Glued together. Not that you or someone else couldn't take those parts apart, that is possible, but finding just the aluminum housing would be nearly impossible as Apple doesn't even sell that housing as a part.

  • Considering going from late 2011 MBP to MBA. Seeking advice on performance.

    I currently have a late 2011 MBP with 4GB RAM, 2.4 GHz Intel Core i5 and am running into some performance issues. My main issue is that it takes time to switch between apps and sometimes to open a new tab in chrome. I have a lot of apps open for work purposes and I'm thinking the slowness could be due to not having enough RAM. When I look at Activity Monitor>System Memory, I see that I have about 1GB in Inactive, 1 GB in Active, and 2 GB in Wired. Then I'm seeing 5.62GB of swap used (that doesn't seem good).
    I like how compact the MBAs are and am thinking of getting either the i5 or i7 with 8GB of RAM. I'm thinking that the increase in RAM as well as the flash storage would help with the type of slowness I'm seeing, but would hate to buy it only to have the same problems.
    I would love to get some advice on this.

    I HAD the same 2011 MBP you have, and HAVE the current Macbook AIR,....theres almost no comparison between the two. You should possibly go use one for a bit at the Apple store etc, however regarding your question "will it be a difference/ big upgrade" the answer is of course yes,....definately so.

  • Does anyone know how to reset the fan on a MacBook Pro 13-inch (Late 2011) to it's factory setting speed (Maybe Terminal may help?)

    I have a late-2011 13-inch MacBook Pro running OS X Yosemite. (Standard configuration).
    My problem is that I downloaded a fan control application and it worked perfectly, but it started to get annoying so I deleted it.
    Does anyone know how to reset the fan speed back to factory settings (Maybe a command in terminal?)

    Hello damo1177,
    It should help to reset your system's SMC and NVRAM.
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    About NVRAM and PRAM
    http://support.apple.com/kb/HT1379
    Cheers,
    Allen

  • Graphics issues with MacBook Pro 15-inch Late 2011 model

    I have a MB Pro 15-inch late 2011 (2.4GHz Core i7) and recently I started to get random screen glitches while working on photoshop and illustrator and then eventually the screen went totally blank and so I paid to have the graphics chip replaced (as I was out of warranty).
    After 2 weeks, the same glitches have started again so I did some internet research and discovered that that there are thousands of other people around the world who had similar issues in this particular model range that uses the AMD Graphics chipset (Radeon HD 6770M) combined with the Intel HD Graphics 3000 on the same motherboard.
    Does anyone know if Apple has announced a recall / replacement programme for this model as it appears to be a widespread issue ?
    Thanks
    Rohit

    There is an online campaign at change.org which has crossed 10,000 signatories (or is about to) that should prove that there is an issue.
    From my analysis, the problem is the AMC Radeon GPU that is the problem - there is some compatibility issue with the logic board. I just paid to get the problem solved, but it has come back again in less than a a week. I installed gfcCardStatus to control which graphics chips are being used and found that when the Intel HD chipset is used, there is no issue, but when it switches to the AMD chipset, the problem returns.
    There is certainly an issue and it's widespread and I am sure that this will come back to bite apple in the ***...
    I think their issue is probably that the fault lies in AMD's chips and not their circuitry which is probably why they don't want to bear the cost of a recall program unless AMD contribute to the costs...which they won't because Apple have pretty much stopped using AMD GPUs and use nVidia instead now.
    Anyway, I'm going to go back to the repair folks and have them re-fix the issue as it's covered by their warranty. Let me know if you have any more luck on your end.

  • Windows 7 install on late 2011 MacBook Pro without bootcamp (performance issues)

    Hey guys I'm hoping I can get this issue resolved. I have purchased a late 2011 MacBook Pro (radeon 6750m 1gig). I installed a fresh copy of windows 7 without bootcamp. Having real issues with game performance like world of Warcraft. I have done this with an older unibody Mac and it ran great (for any non believer)... But now this time around I'm getting horrible fps in game. I'm thinking it may be driver related it buy I am having trouble finding the right drivers to see if that's then issue. Any help on this would be greatly appreciated.

    Shotgun00 wrote:
    That is completely false. There is no real need to leave OS X on the Mac if you don't want to, especially with Win 7 or 8. That may of been true with Windows XP but not anymore.
    The problem with leaving OS X installed is then you are really limited with what you can do with the drive. You can only have one Windows partition and if you fool with it at all Windows will no longer boot. you can't even change the OS X partition otherwise Windows would boot
    Windows 7 will install all by itself. No need for any Boot loaders or Hack Boot system. Pop the Win 7 DVD in the DVD drive and restart. Windows will be installed all by itself. But you do need the Apple support files.
    In the end if you are going to run Windows on a computer by itself then you really should not buy a Mac. The hardware is the same and as to the OPs perceived better built quality I personally do not see it. And if you actually read some of the posts on this and other Mac forums you will see that perceived build quality is just a bunch of hype, in my opinion.
    To the OP. You aren't missing anything.
    If you had carefully read what I wrote, I merely said that doing the install on a blank drive wasn't a good idea. That's because it can create issues the OP is having. A Mac's hardware is no different than a comparable Windows machine, but the EFI/BIOS/Firmware is. Macs are in something of a no-man's land in this regard, as they have neither an old-school BIOS or modern UEFI of recent Windows-based notebooks. I'm willing to bet that the performance problems the OP is having relates to the fact that a straight EFI install on a modern MBP "enables" (for lack of a better word) automatic graphic switching. The capability manifests, but the functionality is not there. Enterprising individuals have been trying to get graphic switching in Windows to work as it does on the OS X side ever since MacBooks debuted with this abliity but with zero success.
    Using Boot Camp bypasses this, as the discreet GPU is enabled full-time in Windows. Thus, you will realize proper performance.
    As far as perceived build quality, Apple machines are at the high end of the consumer notebook spectrum. They're certainly better than most of the other machines you can pick up at your local Best Buy, but they fall short of business-class machines such as the Dell Latitude/Precision, HP ProBook/EliteBook, and Lenovo ThinkPad.

  • MacBook Pro (Late 2011) Graphics Card issue; shall I keep it?

    Hi there,
    I've recently bought a MacBook Pro (Late 2011) second hand from someone on eBay, it's going to be delivered in a couple days.
    Now, after the purchase, I did some research into the production year - I know, I should've done it before really - and found a huge amount of people with the very-known issue of the Graphics card. The issue causes massive visual problems and has, on many occasions, resulted in a replaced Logic Board.
    I'd like to know whether you think that this machine is a safe one to keep, or if I should send it back and try and get one from a different year?
    The seller said, once I asked him about it, that the previous owner (obviously someone has had it before him) apparently had a few issues, but he himself hasn't, and is using Mavericks.
    What do you think?

    Not ALL of the 15" and 17" models have had a problem with the soldering of the GPU - maybe 20,000 at the most (based on the information that I've been gathering and some of those may be reports on the same machine). It's possible that yours may be  good one.
    However... I wouldn't take the chance, were it me. I've only had my logic board replaced once and it's been almost 11 months now and my machine is still working. But I'm sure that the problem will surface again (after my AppleCare runs out in 2015!) so I've decided to become less Mac-dependent in the future.
    If I were you, I would just tell the seller that you're not comfortable buying a 2011 model with the discrete GPUs (the 13" models are just fine) and would shop Apple's refurbished section, looking for a non-Retina 2012 model.
    My opinion...
    Clinton
    MacBook Pro (15” Late 2011), OS X Yosemite 10.10, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display

  • I have a MacBook Pro Late 2011 and having issues with utilities screen.

    I have a MacBook Pro Late 2011. I want to reformat my hdd to start from scratch. My issue is when I am on the utilities screen I am unable to click on anything. I want to delete my current partition but I am unable to click on Disk Utilities. Please help me!

    According to your profile your Mac is running v10.7.3 Lion.
    If that is the case, to reformat the hard drive you need to use Lion Recovery not Disk Utility.

  • Fans continuously run loud on late 2011 13" MacBook Pro

    Hey All,
    I hav a late 2011 13" MacBook Pro and about a week ago the fans began to run loudly and constantly no matter what I'm doing-whether checking email or running a dozen layers in a Photoshop project. Anyone have any clues? Running Lion, 4 GB RAM--bought an 8 GB kit but not yet installed, would that help? is there a firmware update or something?
    Thanks for any assist.

    i'm having the same problem too, with my early 2011 mbp 13".  recently downloaded iStat pro, and found out that my fans are usually running about 6000rpm, and my CPU temp is above 90.  i'm using preview, word/excel and listening to music. 
    not to beat a dead horse (again) but none of this happened when i was on snow leopard.  i upgraded straight from SL to ML, and a host of problems ensued (mostly battery health/life).  is it something that can be tracked again to a faulty piece of hardware in the system that was highlighted after the OS upgrade?

Maybe you are looking for

  • How to access a Portal User Info from a J2EE application?

    Hi, I have deployed a j2ee application in portal and its running fine. from that application i need to assign some roles to some users.i have the user id. so my doubt is can i access the portal user info from this j2ee application?i have some servlet

  • Job submit error

    Guys, simply, i want to create temp_undo ( done ) and i want to do the following create or replace procedure temp_undo_procedures is CURSOR c is select a.name, b.status from V$rollname a, v$rollstat b where a.name IN (select segment_name from dba_seg

  • Help me out with Directory structure for JSF+SPRING+HIBERNATE Project

    Hi frnds , My name is Walter working for a startup software company . We are working on Hospital Management System (HMS) project .. MVC Architecture ...using Hibernate Spring and JSF ..we need to design Directory Structure for our project.. plzz help

  • What is a (Logic Express) aggregate device?

    Im not a complete newbie to the world of music tech, I'm just getting back into it after a few years away. There's one term which keeps cropping up on here which is completely alien to me: Aggregate Device What is an aggregate device? It seems to ref

  • Layout for all users

    Hi All, How can I change the layout for alll the users, When i have chnaged it is showing only for me and not for others