MBA with CITRIX - shift key only CAP the first charactor?

My MBA connects to work PC (windows xp) via CITRIX(Citrix Online plug-in for Mac -web) in Snow Leopard, it seems like shift key + any charactor, only cap the first hit, it caused lots of trouble for my typing habit, as even I am holding my shift key and then press any keys, it will only cap the first one. I had tested in Snow Leopard, there is not problems with holding shift key to get CAP characters, only happen in CITRIX session.
Does anyone have the same problems and anyone know how to fix it?

Have you tried the version of citrix listed in the Apple App store? It can open most of the data files the plugin will open, and it seems to have a little bit better performance.

Similar Messages

  • I've bought the season 1 of "The Wire" (7episodes), when I synchronize with my PC, it only charge the first and last episodes and not the 5 episodes in between ??

    I've bought the season 1 of "The Wire" (7episodes), when I synchronize with my PC, it only charge the first and last episodes and not the 5 episodes in between ??

    Hello spinozette,
    I am sure you are eager to download and watch Season 1 of The Wire.  I found a couple of resources that might help with downloading this purchase.
    First, I recommend checking to see if the download was interrupted.  You can use the steps in this article:
    iTunes: How to resume interrupted iTunes Store downloads
    http://support.apple.com/kb/HT1725
    If the episodes do not download after following the steps in that article, I recommend trying to download the episodes from the list of past purchases. You can find the steps to do this in the section titled "Apps, Books, Music, Movies, or TV shows on a computer" in the following article:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/HT2519
    If you are still not able to download the rest of the season, I recommend reporting this issue to the iTunes Store:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
    http://support.apple.com/kb/HT1933
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • How do I print just 1 web page in FF 29 ? With 29 you can only change the first field ( 1 of 5, 2 of 5, 3 of 5, etc. ) That means I can only print all 5 pages,

    So I cant seem to print just the 1st of 5 pages. The default setting , 1 of 5, will print all 5 pages. The 2nd field can not be altered, as it could in previous FF versions, to 1 of 1. Therefore, I can only print all 5 pages, 2 through 5, 3 through 5, etc. WTF - I keep wasting print paper. I got the print edit add-on but that doesn't seem to help. I have been through several FF versions and do not like the format of 29.

    Actually, with the [https://addons.mozilla.org/en-US/firefox/addon/print-edit/ Print Edit addon], if I click the down arrow I get the old print format options and can do it.

  • Shift key only working on some letters ?!?

    Ok - this just started ...
    I can get capitals by using cap-lock on all keys.
    Please help - obviously this is pretty annoying.
    with the regular shift it works as below.
    letters in upper case work with both shift keys
    letters in lower case work with neither shift key
    letters that work with only the right key as noted:
    AAAA
    bbb
    ccc
    DDD
    EEE - only with right shift key?
    FFF
    GGG
    HHH
    IIII - only with right shift key?
    JJJ
    KKK
    LLL
    mmm
    nnn
    OOO - only with right shift key?
    PPP
    QQQ
    RRR
    SSS
    TTT - only with right shift key?
    UUU - only with right shift key?
    vvvv
    WWW - only with right shift key?
    xxx
    YYYY - only with right shift key?
    zzzz - - only with right shift key?
    ~!#$%^&*()_+{}|:"?? - left & right carrot also do not work - rest of symbols seem to be ok

    Keyboard failure. Hopefully you have Applecare. Hopefully it didn't fail after spilling liquid on the keyboard, but if so hopefully you have a separate keyboard (this is an iMac forum) rather than the MacBook you list in your signature.

  • How can I print Double A4 with HP Officejet 6500? I only get the first page...

    I try to print a large photo in "landscape" Double A4 with my HP Officejet 6500.
    I can select "Double A4" to print but I only get the first page. So I only have  half a photo.
    What should I do?

    chris
    You can not attach a multi-page .pdf document to Pages.
    Just create a folder in which you enclose both your Pages letter and the .pdf.
    Peter

  • I want to open a domain.site2 file outside the default folder (User/Library/Application Support/iWeb) with iWeb11, but iWeb only opens the domain file in the default folder. If I delete the default domain file, iWeb wants to create a new site. Help please

    I want to open a domain.site2 file outside the default folder (User/Library/Application Support/iWeb) with iWeb11, but iWeb only opens the domain file in the default folder. If I delete the default domain file, iWeb wants to create a new site. Does anyone have the same problem or know how to fix it?

    In Lion the Finder folder is now invisible.  To make it permanetely visible enter the following in the Terminal applicaiton window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    For opening your domain file in Lion for the first time or to switch between multiple domain files  Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an applicaiton.
    Just launch the applicaiton, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
    do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
    tell application "iWeb" to activate
    OT

  • Google Sheets: A browser error has occurred. Please hold the Shift key and click the Refresh button to try again.

    Since upgrading to OSX Yosemite last night, I get this error message when I open spreadsheets previously created in Google Drive: "A browser error has occurred. Please hold the Shift key and click the Refresh button to try again." Following these instructions does absolutely nothing.
    Word google docs open fine, as do spreadsheets that aggregate responses from a form and a select few spreadsheets; however most other spreadsheets display the same error message.
    I've tried:
    opening in Google Chrome - uninstalling and reinstalling Google Chrome: same issue
    opening in Firefox: same issue
    opening from sheets.google.com: same issue

    moving tab doesn't work.

  • I get this message when I try to open my google shared docs this week: "A browser error has occurred. Please hold the Shift key and click the Refresh button to try again." - but that click/refresh doesn't work either. What's up?

    # Question
    I get this message when I try to open my google shared docs this week: "A browser error has occurred. Please hold the Shift key and click the Refresh button to try again." - but that click/refresh doesn't work either. What's up?

    The backend end is in serious pain....on many levels.
    Try this: Connection Problems Form

  • I uploaded 3 audiobooks from iTunes to my iPhone 5 with the latest ios7 on it. Each of them only plays the first 15 mins of the playback and then silence, the bar shows the book is still playing but no sound, any ideas? Thanks

    I uploaded 3 audiobooks from iTunes to my iPhone 5 with the latest ios7 on it. Each of them only plays the first 15 mins of the playback and then silence, the bar shows the book is still playing but no sound, any ideas? Thanks

    What happens when playing the same books in iTunes. Is there sound after 15 min?
    If also silent in iTunes, check the info tab where you can see the item is an audiobook, etc. Check the volume bar, this normally is on the zero point.
    When an audio book is really low in audio, I tend to move this to the plus side (+1=max), but for some strange reason this bar was at -1 in some books I had and they also seemed to play in absolute silence.

  • I have problem with my iphone,i activate him with my apple id but i give him a resset and now don't whanna recognize my apple id,this phone wha activated with my apple id,i am the first and only one propert

    i have problem with my iphone,i activate him with my apple id but i give him a resset and now don't whanna recognize my apple id,this phone wha activated with my apple id,i am the first and only one propert

    my imei is 356955067431598 iphone 6 space grey 16gb

  • HT1296 Syncing my iPhone with Outlook in iTunes only transfers the information from Outlook to my iPhone

    Syncing my iPhone with Outlook, in iTunes, only transfers the information from Outlook to my iPhone, not vise versa.  How can I configure it to transfer data from my iPhone to Outlook as well?

    I had a backup from outlook that I restored to outlook and then used Itunes to sync the Iphone
    I had to turn off the ICloud sync
    The only problem now is that it does not sync my calendar or contacts unless i plug the phone into my compluter and tell Itunes to sync them

  • Anytime I try to print in Firefox a Microsoft KB article that is 1 page, I always only get the first page.

    Anytime I print any Microsoft KB article, I only get the first page worth of text. This is very troubling because the articles are typically long, and I only get 1 page. The second page always comes out blank (even though in IE it will print out multiple pages with all the text).
    My specific example today is listed in the URL below. This example will only print to the "DIR" command, I don't get the full page printed out.
    Anyone else have this problem? Anyone have a resolution? I hate having to hit up IE just to print a single article.
    I updated to FF 8.01 just to make sure, and I have tried different printers and even computers, to no avail. Even the print preview has the issue, only the first page worth of text is printed and the second page is always blank (even if there are 3, 4, 5, etc pages of data to be printed).
    I have also tried the Firefox Menu -> Print command, and the "on-page" print command. I have seen moderate success with highlighting all the text that I want to print and going to "Print-Selection" but it is ugly.
    Any feedback or assistance is greatly appreciated.

    '''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
    ''(If you're not using it, switch to the Default theme.)''
    * You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Don't select anything right now, just use "'Start in Safe Mode"''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
    '''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
    Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

  • Delay on playing an instrument (only at the first time)

    Hello,
    I'm new to Mainstage and have the following problem:
    Always I open my concert, there is a small delay in all instruments in all patches. But ONLY at the first time, I play the instrument (hit the key). For the rest of the performance everything works fine ... How can I get rid of that??
    My work-around right now is, to mute the Main Audio at the soundcheck and play every instrument/patch once ... :-(
    Thanks for your support and greets from Germany
    ... Joonas

    Thanks for your answers first of all !
    At the end I found the solution looking at the Note:307167.1 on Metalink:
    Discoverer Plus 10.1.2 Fails with ORA-1017 Error On First Login Attempt Then Works On Second Attempt
    This note is very useful but into the solution the point 3 is not correct !
    3. Modify the servername parameter to indicate the fully qualified servername.domain
    Example:
    An httpd.conf setting of: ServerName my_servername.mydomain.com should match a Discoverer Plus URL like http://my_servername.mydomain.com:7778/discoverer/plus
    I had this problem both with Viewer and Plus...so instead to change the server name parameter (into the Apache/Apache/conf/httpd.conf file) with my complete URL (http://gnvdev.ote.gr:7779/discoverer/plus), I just write my right server name:
    Example
    After the installation of the Discoverer 1og server, into the httpd.conf file it was written automatyically: ServerName gnvdev
    I just modified in ServerName gnvdev.ote.gr and both Viewer and Plus started to work perfectly at the first time.
    I hope that this hint will be useful for you and others in the Discoverer forum !!!
    Best Regards
    Alex

  • When I print a web page it only prints the first page and not the rest of the web page below the page break.

    When I print a web page firefox will only print the first page, all of the content to the first page break and nothing past that.
    How can I change the settings so that it will print more than on page?

    -> Tap ALT key or press F10 to show the Menu Bar
    -> go to Help Menu -> select "Restart with Add-ons Disabled"
    Firefox will close then it will open up with just basic Firefox. Now do this:
    -> Update ALL your Firefox Plug-ins https://www.mozilla.com/en-US/plugincheck/
    -> go to View Menu -> Zoom -> click "Reset" -> Page Style -> select "Basic Page Style"
    -> go to View Menu -> Toolbars -> unselect All Unwanted toolbars
    -> go Tools Menu -> Clear Recent History -> '''Time range to clear: select EVERYTHING''' -> click Details (small arrow) button -> place Checkmarks on '''Cookies, Cache, Site Preferences''' -> click "Clear Now"
    -> go to Tools Menu -> Options -> Content -> place Checkmarks on:
    1) Block Pop-up windows 2) Load images automatically 3) Enable JavaScript
    -> go to Tools Menu -> Options -> Security -> place Checkmarks on:
    1) Warn me when sites try to install add-ons 2) Block reported attack sites 3) Block reported web forgeries 4) Remember Passwords for sites
    -> Click OK on Options window
    -> click the Favicon (small drop down menu icon) on Firefox SearchBar (its position is on the Right side of the Address Bar) -> click "Manage Search Engines" -> select all Unwanted Search Engines and click Remove -> click OK
    -> go to Tools Menu -> Add-ons -> Extensions section -> REMOVE All Unwanted/Suspicious Extensions (Add-ons) -> Restart Firefox
    You can enable your Known & Trustworthy Add-ons later. Check and tell if its working.

  • How do I display text only in the first page inXML Publisher

    Hi everybody,
    I've been reading so much, on the last two days, on this issue at this forum but I didn't get an answer. My problem is: In an invoices report some text and fields from the invoice header, (such as payment terms, bank details etc.), should be printed only in the first page of the invoice, (If the invoice has more than one page). These elements are not in the document header/footer but in the document body. That's why I think the different fist page of MS Word will not work. I tried also <? start@first-page:body ?>, with no success. Any idea, someone?
    Thanks,
    Shimon

    Hi,
    Did you find solution to your problem? I am facing same issue and I want to know how you solved it? It would be great help.
    Thank you.
    Regards,
    Rahul

Maybe you are looking for