MBA13(mid 2011) Wi-fi: No Hardware installed

Hi Community and Apple Support!
I bought MBA 13'' mid 2011 about 3 weeks ago in Houston,TX. Today in the morning, after reboot i cannot connect to any Wi-Fi network, because i see wi-fi icon disabled and it is shows: "Wi-Fi: No hardware installed". My MBA running on 10.7.3 MacOs.
I've already tried:
1). Remove all setting for network;
2). Reset SMC
3). Reset PRAM;
4). Boot in Windows via Bootcamp (wifi adapter cannot be found as well);
5). Rebooted about 10-15 times;
6). Run Wi-Fi diagnistics and it is hanged up.
I live in Ukraine, so there is no Apple Store in my country.
Please help me to fix this problem.
Thank you!
Alex

Restart the Mac but uncheck "Reopen windows when logging back in" in the dialog box.
Regards,
Captfred

Similar Messages

  • Sudden restarts while using bootable USB installer (mid-2011 iMac) - evidence of hardware problem?

    Greetings:
    For a couple of years I've been suffering from an issue reported in many threads:  seemingly random shutdowns and restarts of my mid-2011 iMac.  These can happen several times a day, or there can be a gap of weeks between occurences.  I've searched the web and discussions.apple.com endlessly, and tried every conceivable solution.  I've observed no consistent pre-restart pattern in Console.  I've tried removing all unnecessary extensions and start-up programs.  Fixed permissions, repaired HDD, many of the diagnostic procedures described by LINC (superuser on this forum).  I would sometimes get temporary relief from periodic restart loops, by unplugging the computer and resetting PRAM, but this would not last long. I couldn't discern whether it is a software/conflict issue, or a hardware issue.  Have run AHT in extended looping mode, several times, and found nothing wrong.  Which caused me to keep thinking it must be a software issue.  The last thing I've tried is a clean install of Yosemite, with full HDD erase, from bootable USB.
    I did this successfully, restored files from Time Machine...but then a few hours later, a series of sudden restarts began, with 4 or 5 within a couple of hours. I decided to shutdown and restart using the bootable USB installer again, and run Disk Utility from it to check the HDD for errors.
    But then, while booted up from the USB (and after running Disk Utility with a normal result):  the computer suddenly turned off and restarted!  And then it rebooted again into installer mode (i.e. running off the bootable USB), and I ran Disk Utility again and ...it happened again!
    So what does this tell me?  I am asking all of you for confirmation please.  I am thinking this is a strong indication that whatever the issue is causing the restarts, it is hardware based, as the system was running off the bootable USB at the time, NOT using installed operating system or software.  AND this reminded me of one other instance where the system had rebooted randomly, while I was in SAFE mode.
    Would you agree that this is likely now pointing to a hardware issue?  Is power supply the likely culprit?  Or??  (and recalling that repeated AHT have showed nothing...).  Is it worth trying to fix (out of warranty)?
    thanks for any insights,
    Warren

    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    This procedure is a diagnostic test. It makes no changes to your data.
    Please triple-click anywhere in the line below on this page to select it:
    syslog -k Sender kernel -k Message CSeq 'n Cause: -' | tail | awk '/:/{$4=""; print}' | pbcopy
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    Wait for a new line ending in a dollar sign ($) to appear below what you entered.
    The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
    The Terminal window doesn't show the output. Please don't copy anything from there.

  • Macbook Pro 13 mid 2009 Wifi reads "No hardware installed"

    After installing a new screen for Macbook Pro 13 mid 2009 my Wifi reads "No hardware installed" what should I do?

    Check out the threads in the "More Like This" section on the right side of this answer.
    If this does not help, contact Apple.
    Best.

  • (MacBook Pro 15-inch, Early 2011) Wi-Fi: No hardware installed...

    The Wi-Fi hardware irregularly connects to the network. Once the WiFi is disconnected, it cannot be reconnected unless restart or shutdown. I restart or shutdown to "refresh" the scenario but the problem has grown more frequent. I can connect to the network through Ethernet and when Wi-Fi functions. I really need the Wi-Fi to function to make use of this computer  at home and at work. Aside from going to a Genius Bar, what else can be done to troubleshoot a rogue Wi-Fi hardware connection?
    Thanks!
    MacBook Pro 15-inch, Early 2011
    2.3 GHz Intel Core i7
    4 GB 1333 MHz DDR3
    Intel HD Graphics 3000 384 MB
    OSX 10.9.5

    Reset PRAM.
    Reset SMC (but no visual indication of reset).
    The Wi-Fi is able to turn on and off (improved).
    A day goes by with good connection.
    Wi-Fi is now disconnecting realiably within 60 min of restart, no ability to toggle on and off after disconnection.
    Hardware remains displayed as installed (improved).
    The problem is still present. Could this be a hardware issue? I do not have AppleCare and hope to resolve this independently from Apple. Anymore troubleshooting suggestions are much appreciated.
    Thank You!

  • Thunderbolt update for mid-2011 MacBook Air causes slowdowns and flickering?

    So I've experienced not one problem since getting my mid-2011 MacBook Air.  After installing the Thunderbolt update that was pushed through Software Update the other day, I've noticed that when I go into Mission Control or App Expose it's more sluggish than it used to be.
    Additionally, I saw my screen flicker several times - I have never seen this before.
    Has anyone experienced similar problems since installing this update the other day when it came out?  I'm most concerned about the sluggishness of the screens.
    Thanks,
    BJC

    I never installed it, it's popped up each time I've checked -- but today it wasn't offered in Software Update.  Odd.

  • Win 8 pro to win 8.1 pro on Imac mid 2011

    Hi Community!
    I'm experiencing the same issue as this thread https://discussions.apple.com/message/23429321#23429321
    But it's on my Imac mid 2011.
    I had windows 7, I upgraded with a windows 8 succesfully but when I want to update to 8.1 I have a black screen at the end of the installation (no lights) exactly like the computer is Off. When I reboot it restore to win 8
    So I decided to restore windows 8 with a fresh install (all programs and files deleted) and bootcamp 5 installed before.
    I have the same issue , I thought the problem was because of one of my drivers.
    But even with a brand new Win8, with last update, The update 8.1 give me this **** black screen!!!
    I tried with last AMD HD drivers in case it was the graphic drivers.
    I really don't understand what happen!!
    I have two sort of error code when It restore to win 8
    0x1900101 - 40019    or  0x1900101 - 4000D
    Does anyone have a successful update to win 8.1 with an Imac mid 2011?
    I try to install with a complete win 8.1 DVD (no update) I will work?
    thanks for your help

    Well, I have finally figured "my" issue out.  For me, it was the video driver for my 6970M adapter.  The real kicker is that the driver provided by Microsoft during the windows installation which correctly identified my device was NOT compatible with 8.1  The driver provided by Bootcamp driver installation was NOT compatibile either. 
    Basically, you have to uninstall the display adapter and have "delete the driver" box checked in device manager.  Leave it like that, do NOT reboot and install 8.1  The incompatible driver will put itself back on there again but, at least you'll be able to get into 8.1.  You just have to uninstall that device again and go to AMD directly for the latest driver.
    So, below is a more step by step of how I got my 8.1 passed the black screen issue.
    I did a clean install of Windows 8. 
    During the installation process, select customize settings and turn OFF automatic windows updates AND turn OFF automatic driver updates.
    Once at the desktop, uninstall the device AND device driver (display adapter).  Do NOT reboot.
    At this point I had to do windows updates to get 8.1 to show up in the windows store.  However, if you have to do this, UNCHECK any driver related updates first.  It will tell you to reboot, go ahead and do this.  Once back at the desktop, go into device manager and make sure the display adapter is uninstalled/driver deleted or its at least the microsoft generic adapter.  The point is to make sure no device specific adapter is installed. 
    Proceed to install 8.1.  Let it go through its reboots and setup.
    Once at the desktop of 8.1, go into device manager and see if the generic driver is there of it its a device specific driver, uninstall the device/driver, do not reboot.
    Go to AMD (my display adapter maker) and get the latest drivers from them directly and make sure its for 8.1
    Install that driver and reboot.  It should work from there on out.  You can then proceed to install other devices and bootcamp drivers.
    This is what I had to do for my black screen problem.  Its important to note that the black screen issue is common but being caused by a variety of issues.  I was on the phone with Microsoft this morning and explained all of this and my steps that were taken.  Its clear MS has a bad update package especially since 8.1 isn't playing well (causing black screen) with drivers that Windows itself installed during install.  My fix may work for some, but not all.  I hope it helps someone.

  • My Mid-2011 iMac with pre-installed Lion can't load AHT (Apple Hardware Test) over internet

    I have a Mid-2011 iMac (3.4GHz) of which Apple's Support document for the Apple Hardware Test (http://support.apple.com/kb/ht1509) says:
    Some Macintosh computers that shipped with OS X Lion support the use of Apple Hardware Test over the Internet. These computers will start up to an Internet-based version of AHT if the hard drive does not contain AHT.
    Well, this doesn't work for me. My Mac is on a DHCP-supporting router which has constant internet connection. Yet, when I turn off the Mac and then on again, holding the D key down even before the screen turns on, the Mac does indeed react to this key as it's then turning the screen on and taking another about half minute before it continues with the boot process along with showing the Mac symbol. Without the D, the Mac symbol comes up quickly.
    So, it appears that the iMac is indeed trying to get AHT over the internet. Just that it doesn't succeed in it, and probably timing out after a while.
    Any suggestions how to fix this?

    Re
    extract from kb article
    PPPoE (where there is no router handling the PPPoE connection)
    No
    No
    Captive-Networks (where you click an "Agree" button to access the Internet)
    Yes
    No
    Proxies (where specific proxy servers must be configured in network preferences)
    No
    No
    Certificate-based authentication / 802.1x
    No
    No
    try check if you are in that case for your internet acces ?
    could be a firewall problem too , if is possible try desable firewall ( or any internet filter )
    no you can not see a wifi selection if you are wired ( using cable )
    by the way D key for AHT need to be pressed AFTER start up sound , and hold at min one minute
    HTH
    Pierre

  • Installing 10.6.8 partition on 10.8 iMac (mid 2011)

    Hello.  I have recently bought a previous generation iMac, 21.5 inch mid 2011, 2.8gHz, i7 (special build), 8GB memory.  It was apparently a refurb, and purchased by the first owner around Oct 2012.
    It came with Mountain Lion 10.8.2 installed, and I have updated to 10.8.3.  However, I'd much rather be using 10.6.8!  I have a lot of archived files on CD going way back to OS 8.1, and the fact that 10.8.3 can no longer read these backups was the final straw: that and the lack of Rosetta.
    According to the 'original OS' stated on a couple of support sites, this configuration was indeed first issued with 10.6.8, but if I try to restart from the 10.6.3 universal installer DVD I just get a blank screen and a series of bleeps.  Does this mean that there has been a firmware change/upgrade that prevents 10.6 running, or could it just be that it needs a 10.6.8 install disc (if such a thing exists...)?
    In an ideal world, I'd like to partition the internal drive and have both 10.6.8 and 10.8.x bootable.  I believe that the Parallels/10.6.8 Server route is another option, but it starts to get expensive...
    Any workarounds would be much appreciated.
    Thanks in advance,
    Martin.

    At the expense of repeating myself....
    Yes, when the mid-2011 iMac's came out, they were shipped with Snow Leopard and a 10.6.7 install disk.  Shortly after they were introduced, Apple came out with Lion, 10.5, and subsequent iMac's were shipped with that.  If you bought a mid-2011 iMac from the refurb store, as I did a couple of months ago, it was shipped with Mountain Lion.  BUT, there have been NO fiirmware changes to the hardware that prevent the machines from running Snow Leopard.  As I stated earlier in this thread, I used an older MacMini running SL to clone a 10.6.8 hard drive and then used that to successfully clone 10.6.8 onto my iMac and it runs with no problems.  AND, Apple keeps track of the machines they sell - what software was shipped with what serial number.  So, if you bought an early release iMac new that came with Snow Leopard, you may be able to obtain replacement Snow Leopard restore disks for it.  BUT, if you bought a machine after the release of Lion, or a machine from the refurb store that shipped with Lion or Mountain Lion, you CANNOT get a SL restore disk from Apple.  Trust me on this, I tried.  I spent a LOT of time, both through emails and on the phone, with AppleCare personnel.  If you don't have a 10.6.7 restore disk, the only way to get SL on one of these machines is with a clone from another SL machine.
    Dennis

  • Airplay icon missing - iMac mid 2011 type with Mavericks installed

    Hi,
    I am having a problem with Airplay. I have installed Mavericks on my iMac Mid 2011 type and noticed that the airplay icon does not appear on the menu bar as advertised by apple. I am able to play both music and video through the itunes but I am not able to do any mirroring. The airplay display does not even appear in the display settings. Also, I am prevented from using any other alternative solution such as AirParrot. It just gives me a connection blocked error. I have checked the firewall and all is ok. I would really appreciate some help.
    Thanks!
    Hardware Overview:
      Model Name:          iMac
      Model Identifier:          iMac12,2
      Processor Name:          Intel Core i5
      Processor Speed:          2.7 GHz
      Number of Processors:          1
      Total Number of Cores:          4
      L2 Cache (per Core):          256 KB
      L3 Cache:          6 MB
      Memory:          4 GB
      Boot ROM Version:          IM121.0047.B1F
      Graphics:  AMD Radeon HD 6770M 512 MB

    Okay.
    You need Mountain Lion  10,8
    http://www.apple.com/osx/

  • Wi-Fi: No Hardware Installed on MacBook Pro 8,2 (15 inch, Late 2011)

    Hi Everyone,
    For the second time now, I have to bring my Macbook Pro 8,2 (macbookpro8,2, 15 inch, late 2011) running Mountain Lion back to the Genius Bar due to a unrecognized Wi-Fi Airport adapter. The computer was purchased in March of 2012.
    The problem started as I was watching 'The Daily Show" online, when suddenly, I lost connection. I clicked on the wi-fi adapter icon on the top menu bar, and saw that no access points were available when there normally were over 20, including mine in the house. I went into the network settings under system preferences and saw that the wi-fi card was off (although it was just on and still showed the full-signal indicator in the menu bar), and attempted to click the button to turn it back on with no response. All other options were either greyed-out or displayed no information. The Hardware tab didn't even display and the mac address suddenly became all zeros.
    I rebooted the computer, only to discover the wi-fi indicator on the menu bar displaying no signal. Upon clicking on the icon, the dreaded "Wi-Fi: No Hardware Installed" was displayed. I tried resetting the SMC and PRAM/NVRAM with no success. I also rand the Hardware Troubleshooter ( Option - D upon bootup ) which neither saw the communications device nor reported finding any problem.
    I brought it to the Genius Bar, and they ended up replacing BOTH the Logic Board, Wi-Fi adapter, and connection cable between the wi-fi adapter and logic board on July 23, 2012.
    Now, it's October 10, 2012, and last night, as I was working through a VPN tunnel on the terminal on one of our remote servers, the SAME THING happened AGAIN! The connection was dropped, same scenario as above, and upon bootup I was greeted with the  "Wi-Fi: No Hardware Installed" message again.
    The hardware magically disappeard with no mention of this in the Console, as far as I can tell. The Console mentions the loss of connection and inability to contact DNS, but nothing relating to hardware.
    For the record, the bluetooth continued to function both times I've had this issue. The first time this happened, I was running Lion and now I'm running Mountain Lion.
    So apparently there is something really wrong with either the physical enclosure causing a short somehow, the quality of the Broadcom chip on this wi-fi device, or there's some type of software/power causing the chip to short out.
    My compouter is as protected as can be - it's in a Speck plastic housing with a keyboard cover, which was purchased after the first incident, I use it on a hard flat plastic laptop tablet at home, and carry it around in a Timbuk2 Laptop bag. It also has never been dropped.
    What's the problem here? Has anyone else had this problem?
    Thanks and all the best of luck and success solving your own computer problems
    An Admin Becoming More And More Superstitious The Longer He's In This Profession,
    TeaKae

    Sorry for the late reply. I had a bad experience with the Apple Store and the 'Genius' Bar where I live. However, in the end, I received my MacBook Pro back from repair and everything is working.
    Like I said in my previous post, the first time the Wi-Fi broke, I was using Lion. The mother (Logic) board was replaced as well as the Wi-Fi card.
    The second time it broke, I was using Mountain Lion. Booting up the Recovery partition and Snow Leopard (new install) did not solve the issue. The Apple Store confirmed that the Wi-Fi card was broken through various testing, which I observed.
    Since the attenna wires for the Wi-Fi run through the display, we decided the next logical step was to replace the Wi-Fi card and the display. The reasoning is that there could have been a short or cross connection in the attenna wiring that was causing the Wi-Fi cards to short-out/burn-out. The Bluetooth continued to work in both cases the Wi-Fi failed, meaning that it was unlikely a cable problem.
    Since the display and wi-fi have been replaced (20121025), I've had no problems. The wi-fi card is working.
    I'm glad the kext file solution has worked for you. I've seen posts on this solution; however, after determining that this was indeed a hardware failure (by using Recovery console, booting from Snow Leopard, and using Hardware Troubleshooter (it didn't even see the Wi-Fi) ), I didn't bother with fiddling with the kext (driver) files. Besides, this hardware is supposed to be designed to work with the OS without any problems whatsoever. Shame on Apple if they don't ship proper drivers for their hardware!
    TeaKae

  • My Mid-2011 Macbook Air becomes extremely hot when installing apps from the Mac App Store and when deleting apps

    My Mid-2011 Macbook Air 13-inch (OSX 10.8.1 Mountain Lion) becomes hot to the touch when trying to delete large documents, watching videos after waking it from sleep-mode and when installing applications from the Mac App Store. This has also been happening with OSX Lion before I upgraded it to Mountain Lion.

    The Apple Support Communities are an international user to user technical support forum. As a man from Mexico my first language is Spanish. I do not speak English, however I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    What needed to be done the day that you set up the new Mac was go into the Mac App Store (MAS), sign into your iTunes/MAS Apple ID, go to the Purchases pane and Accept the iLife apps that would have been there in a special section. That would have sent you Mac's unique identifier code to Apple's servers and verified that this Mac was eligible for the bundled iLife suite and then registered these apps into your MAS account.
    You might try going to  ~/Library/Caches/com.apple.appstore/adoption.plist, delete the adption plist, restart the Mac and then go to the Purchaes pane and see if you can Accept the apps into your account.

  • Mid 2011 Macbook Air won't boot after installing Little Snitch 3. Grey Screen.

    Hi all
    I think the answer is probably that my SSD is toast but here's the symptoms in case anyone else has experienced this.
    I installed Adobe Lightroom and also got round to upgrading my Little Snitch license and finally putting it on my 11" Air (mid 2011, latest version of Lion) as I use the computer more often than my Pro. After restarting as LS requires I was met with the grey Apple logo screen with no spinning gear. I forced a shut down and started again, again the logo screen, no spinning gear. I tried booting in to safe mode and got only a grey screen, then I tried booting in to recovery mode and got the Apple Logo again. I also tried cmd + C and alt/option with an external DVD drive and Snow Leopard with no luck
    Then I tried a SMC reset, after that I started up and only got the Logo again. I reset the PRAM and the main effect of that was to reset the system volume to max so now I can hear the POST chime but also since the PRAM reset I get only the grey screen and no further. I tried to boot from a USB Lion recovery but only the grey screen. I have also tried booting with cmd +S with no luck either. Internet recovery doesn't work either.
    The keyboard seems to be completely unresponsive, the caps lock key doesn't light up at all and I've a feeling that it's either something as simple as a problem with the keyboard or the SSD is kaput. I think that Little Snitch is a coincidence as there's nothing like this anywhere on the web as far as I can tell with Google and there doesn't appear to be anything on these forums that quite matches, especially the part about not being able to use and alternative boot method.
    Anyone out there got any ideas?
    Cheers
    John

    Hi and thank you for your response.
    The fans only kick in when the machine freezes.
    I updated from Snow Leopard to Lion using the App Store. The install was successful and worked for about 30 mins then the unresponsive behavior started. Once I rebooted, I received the issue previously stated above (i.e., the trackpad and keyboard is unresponsive).
    I've also tried booting using the Option key and choosing the Recovery Mode. Once in Recovery Mode the same crash happens  (i.e., the trackpad and keyboard is unresponsive)

  • 13 in macbook pro (early to mid 2011) : after the update, computer freezes with spinning wheel every 30 seconds first with safari and now with all the applications. I don't have any programs installed and still had good enough memory on the RAM.

    After the update of my 13 in mac book pro (early to mid 2011) , it freezes every 30 seconds with the spinning wheel and now it just freezes. Ive never had this problem until I recently updated. Also, I just checked now for available update ( which there was one), the update would process till the last step and it shows it cannot be expanded? Now my computer wont even restart (just have a grey screen with a cursor). Can someone please tell me what the heck is going on with my computer?
    I also checked the memory and it showed available memory was over 1.5 GB. I dont have any programms installed and do not have backup yet ( dont really need it anyways)
    Problems: first with spinning wheel every 30 seconds and now whole computer just freezes when I restart, it only shows grey screen after the starting sound or it takes about 8 to 10 minutes to restart.
    This ALL happened right after the update with google chrome crashing. I know my apple care plan expired so I cant even go to genius bar. Do you guys know how much it would cost to get it fixed ? Or any recommendations I can do to fix this?

    Try a smc reset:
    http://support.apple.com/kb/HT3964

  • MacBook Pro 17" Mid 2010 wifi "no hardware installed" fix

    Hello,
    Wanted to share my "wifi: no hardware installed" fix for my 17" mbp. Story is short - some time ago I noticed that sometimes after sleep there is no wifi. I'm carrying my laptop with me every day in backpack, so it just won't connect to any known network when I open it. Only reboot helped. I tried all available solutions with no luck - no matter what I do, I must reboot it every time I need wifi. Last month it stopped working completely. First, empty wifi icon, I can't turn it off or on. Finally, after reboot it said "no hardware installed". Quick googling points to dead wifi card. So, I opened laptop to see what card I have to order it online. Guess what happen, when I assembled it back? It worked! But only while it was on a table. As soon as I took it with me - it stoped working. So, I opened it again, re-seated cable from m/b to wifi card and that worked again, until next trip in backpack. So, it seems this cable becomes loose and disconnect after some vibrations. Then I put two small pieces of rubber tape (used to seal windows, very soft) on each side of cable. It's high enough to keep connector in its place when you close cover. See attached pictures. Be careful and don't put too much here - otherwise when you close cover it will damage m/b and wifi card.
    So, if you're carrying your mbp all the time in backpack and wifi sudden disappear saying "no hardware installed" may be this fix will help. Note, this fix only for mbp mid 2010. I have no idea, what happen in other models. And if you're not sure - take it to service.
    Before:
    After:

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • IMac (27-inch, Mid 2011) 2.7 GHz Intel Core i5 4 GB 1333 MHz DDR3 running10.10.2 (14C1514). Trying to install Windows 7 64 bit from an install disc. When attempting to create an ISO image I can save the file in disk utility but can convert cdr to iso

    iMac (27-inch, Mid 2011) 2.7 GHz Intel Core i5 4 GB 1333 MHz DDR3 running10.10.2 (14C1514). Trying to install Windows 7 64 bit from an install disc. When attempting to create an ISO image I can save the file in disk utility but can convert cdr to iso. I select the file and the hit return as in step 8 of the Creating an
    iSO image document but the box that should open to select use iso does not open. How should I proceed?

    The Mac SuperDrive built into your Mac is the Optical drive.
    1. Insert your Windows DVD in Optical drive. Disconnect any external storage.
    2. Insert a USB2 Flash drive. This will be used to hold the BC drivers.
    3. Start BCA. Check the options to download software and Install Windows. You do not need to download Windows. The BCA will download the BC drivers to the USB.
    4. Partition your drive.
    5. You can see the Windows installer screens at https://help.apple.com/bootcamp/mac/5.0/help/#/bcmp173b3bf2.

Maybe you are looking for