MBAir running Maverick

On my new MBAir, Keynote(6.0) slide shows cannot be projected onto a screen except by setting Preferences to "Enable
Presenter Display." With that selected, the computer screen goes blank, but the projector projects the Presenter Dispaly:
Clock, Timer, two panes of slides. With the Present Display de-selected, the projector shows a blank slide on the wall.
When Keynote is not active, the projector shows the laptop screen with its background,
but no icons on the screen are shown on the projected display. I can't seem to get Keynote to simply "Play." Solutions?

works fine.
windows supports batch files, not Fusion

Similar Messages

Install Windows 8.1 on iMac running Mavericks

Hello everybody,
I have a problem with my iMac 21.5 late 2012 running Mavericks. I wanted to install Windows 8.1 on a partition of the Mac, and therefore I bought the DVD from Microsoft and started Boot Camp. I followed the whole procedure, saved the support software on a 16gb flash drive, and all seemed to be going on fine, up to when I discovered I wasn't able to use my Apple Magic Mouse and Keyboard to finish configuring Windows (I mean, from where it asks you to enter a PC name and set the color of the system). I repeated the whole process again and again, but I always get stuck at the same point... Any suggestion?
Thank you very much in advance for your help

Windows will not boot from USB if the Mac has an internal optical drive. This is something that Microsoft implemented.

Running Mavericks on an iMac 2.7 GHz Intel Core i5, I've been trying to install Adobe CS3. All components install except InDesign. Is this an installation disk problem or is it not compatible with the OS?

Running Mavericks on an iMac 2.7 GHz Intel Core i5, I've been trying to install Adobe CS3 Design Premium. All components install except InDesign. Is this an installation disk problem, or is there a compatibility problem with the OS?

I fear that you are trying to download OLDER Software on a newer Operating Sysytem Meaning that you need to Install the Latest Version of Adobe on the Newer Operating System for it to work Properly. Be sure to always check the minimum System Requirements.

I add my comcast email to the mail on a iMac running Maverick. It downloads all my emails from there. How do i get my email to delete of the the server

I add my comcast email to the mail on a iMac running Maverick. It downloads all my emails from there. How do i get my email to delete of the the server

Go to Mail Preferences>Accounts, click the '+' button below the list of accounts and insert the settings, username and password as instructed. Some account types can be set up automatically as soon as Mail knows the emails address (because the server settings are built in), in other cases you will have to get them from your ISP.

I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

How Do I transfer Pages document to a MacAir that doesn't run Mavericks?

I want to transfer a document (created in Pages 5.2) via a thumbe drive to a 4 year old MacAir that can't run Mavericks. The APP store on the MacAir won't allow a download of 5.2 (incompatabile). Is there a way I can get this document onto my MacAir so I can use it when on travel?
Thanks,

A 4 year old Macbook Air can't run Mavericks?
According to Apple it can:
http://support.apple.com/kb/ht5842
Peter

Is there a way to view old floppy disks running Maverick?

Is there a way to view old floppy disks when running Maverick?

While there are older usb external floppy drives available I seriously doubt there are any current drivers to support them. If it is the floppy's content you want then an older pre Intel Power PC capable of running Classic environment (or mac OS9) could utilize the external floppy drive. Also consideration has to be given to the capacity of the floppies as 400k and 800k are not read by most of the later drives which would include the usb ones.

The dropdown menu from the Creative Cloud icon on the menu bar keeps giving me the following message: "Download Error" I quit and restarted the creative cloud app to no avail. Running Mavericks on a mid 2011 iMac.

The dropdown menu from the Creative Cloud icon on the menu bar keeps giving me the following message: "Download Error" I quit and restarted the creative cloud app to no avail. Running Mavericks on a mid 2011 iMac.

Try below steps once
click Gear icon on the top Right corner and Quit Creative Cloud App
Click on Finder and then hold Command + Shift + G keys on your keypad
It will open Go to folder window, type exactly ~/Library and click on Go
Make sure to open ~/Library not /Library ( there will be two Library folders )
Then open Application Support > Adobe folders
Trash AAMUpdater and OOBE folders.
Then launch Creative Could and check.

I own a MAC Pro 3,1 (early 2008) and am running Mavericks 10.9.3 with no problems. I would like to add an I/O card to add USB 3 functionality or ESATA functionality but am unable to find a compatible card. As such my question...can I do this and if so wha

I own a MAC Pro 3,1 (early 2008) and am running Mavericks 10.9.3 with no problems. I would like to add an I/O card to add USB 3 functionality or ESATA functionality but am unable to find a compatible card. As such my question...can I do this and if so what is the best card?
Thank you

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
Also see:
https://discussions.apple.com/thread/6282459?tstart=0

Premiere elements 12 on Mackbook Pro running Maverick

Premiere elements 12 on macbook pro running maverick. Crashes on opening with multi page error message. reinstall does not help

Also, don't forget to run a Disk Verification and a Font Check on your Mac. Corrupt fonts can cause some real problems for this program.
http://forums.adobe.com/thread/940869?tstart=0
It also matters where you got your copy of the program from. The version available in the App Store has had so many problems that Apple pulled it.
There may also be issues with your Retina display, if you have that feature.

Can't Print to Canon ImagePROGRAF 600 with IMAC running Mavericks

I have a new IMAC running Mavericks connected to a networked Canon Plotter. I can plot to it using my old MacBook Pro running snow leopard with the 2009 Driver Ver. 2.17. And my office mate can print to it using a 2009 IMAC running mavericks with the 2012 Driver and ver. 3.10. When I go to print, in the page set-up of the print window I can only select MANUAL for the paper feed, I can't change to cassette or Roll, and then an alert pops up saying: "Manual is not available..."
If I ignore that and continue trying to print I get a printer error message say: "Open error: Try turning the printer off and back on again..." This doesn't work either.
I've tried going backwards in software generations but that only creates more problems. The Mountain lion version allowed me select MAUAL or CASSETTE in the page set up window but then the ImagePROGRAF Preview said "That function is not support by this printer." Has any one experienced this and solved it? Thanks.

lambarena wrote:
When I go to print, in the page set-up of the print window I can only select MANUAL for the paper feed, I can't change to cassette or Roll, and then an alert pops up saying: "Manual is not available..."
I think this could be related to a communication problem between the Mac and iPF. I don't have an iPF600 but do have an iPF8400 and iPF9400S. I downloaded the v3.10 driver for 10.8 and installed it on 10.9.5. I then created a dummy IP address and selected the iPF600 driver. When I first tried to print I got the following pop-up.
As this IP address was not connected to any printer I cancelled this window and then found the same symptom as you i.e. Only having Manual and selecting it resulted in an error window appearing. I also found that when I changed to the Main menu, the Media Type drop menu was stuck at Plain Paper.
I then created another printer to the iPF8400 but using the iPF600 driver. When I selected to print, I got the pop-up again. This time I entered my password and then found that the drop menus worked in Page Setup and Main.
So when you added the iPF600 to Printers & Scanners, did you get the pop-up above?
Also, if you select the Main menu, is the Get Information button available?

Running Mavericks + FCPX on External Boot Drive?

Hello
I have a 2010 Mac Pro with 2 x 2.93 GHz 6-Core Intel Xeon. Running OS X 10.6.8 and FCP 7.
I want to run Mavericks and FCPX on an external drive to test FCPX and if I would be comfortable using it.
Is this possible? If so, how do I do it?
Need help asap please.
Thank you.

What this story makes apparent is that Mavericks is more picky than SL about the partition map.
SL can boot from a drive which is partitioned using APM, while Mavericks cannot.
You can still clone with SuperDuper, but you'll have to erase and change the partition to GUID first.
In Disk Utility, select the drive, click on "Partition", choose the desired number of partitions, and then click the Options button. It should look like this:

Why does iPhoto 8.1.2 work on one iMac but not another when both are the same spec both running Mavericks 10.9.1?

I have a studio of 7 iMacs all running Mavericks 10.9.1, six of the machines are able to open iPhoto 8.2.1 but for some reason after updating the seventh, iPhoto vanished completely from that machine. I reinstalled it from a copy I had saved on a HDD but it now says it's unsupported with this version of OSX. I don't want to pay the £10 + for a piece of software that is only being used to import photos from the occasional iPhone so wont be installing the new version, especially as I know 8.2.1 does work on Mavericks.
Any suggestions?
Many thanks

Reinstall v8 from the install disk as, at a guess, the version of the HDD is missing components.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Download it from the App Store to reinstall It's on your Purchases List* there.
For older versions that have been installed from Disk you'll need these additional steps:
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
*Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

Following hard drive failure on iMac running Maverick I have recovered from TimeMachine backup but now app store does not connect. All other internet connections normal. Does anyone know of a fix?

following hard drive failure on iMac running Maverick I have recovered from TimeMachine backup but now app store does not connect. All other internet connections normal. Does anyone know of a fix?
Also mail not loading. The error report suggests that I look for updates from the app store?

http://www.apple.com/support/mac/app-store/contact/

Just updated to a refurbished MacBook running Maverick from an iBook on Panther. I can't get iTunes to recognize my library in my external. Thoughts?

I just boght a refurbished MacBook (2009ish) with 4gb RAM and 160gb hard drive, running Mavericks. It is an update from a 2006 iBook running Panther. I have a tera external. As this is a refurbished machine, I do not have the startup disks.
In general setup has been fine, with the exception of a couple of issues.
1. I cannot get iTunes to recognize my iTunes library on my external. I've done all the setup, a few times, but it just won't acknowledge it's there. I downloaded a few files from the Cloud, but when I look in the library they're not there. They're also not in the "music" folder on the hard drive. Suggestions?
2. For some reason, when I create an "iTunes Media" folder on my external, iTunes does not save things into it. Every single album/song/artist is listed as a separate folder. That is, when I open my external in Finder I get a window with well over 100 folders. This would be fine, if not for the fact that I have other, non-iTunes files, on my external and it makes it a pain to find them when I need to. This isn't such a big deal, but it is a rather pain in the arse. Thoughts?
3. I have also moved my iPhoto library to my external, but when I click on "iPhoto Library" in my external I don't see any actual files, despite there being over 1000 photos in the library. Is this normal? It doesn't seem right.
Any help is greatly appreciated.

search Google for "iphone not recognzied" for countless instructions and articles.

MBAir running Maverick

Similar Messages

Maybe you are looking for