MBAM 2.5 ADMX files with MBAM 2.0

I am standing up a new MBAM 2.5 environment to integrate with ConfigMgr 2012 R2.  We currently have MBAM 2.0 integrated with ConfigMgr 2007.  
I want to know if I will run into any problems if I copy the new  ADMX files to the sysvol share?  Will our current GPOs for MBAM 2.0 break?
Thanks.
Eric

Hi Eric,
This will not break the existing group policy. I have already done the upgradation with out any issues.
Regards,
Narendrn

Similar Messages

  • Office 2013 ADMX files not being read by group policy editor?

    Okay so I'm having a real problem with the ADMX files for Office 2013. First of all we have a mix of 2012 R2 DCs with one 2008 R2 DC. The 2008 R2 is currently the primary DC. Here's what I've done so far:
    Downloaded the ADMX files both 32 and 64bit.
    Copied from my machine (Win7) to 2012R2 DC.
    Downloaded and copied directly to the 2012R2DC policy definitions location
    According to the research I've done, the Office 2013 template is supposed to appear under User Configuration\Policies\Administrative Templates. However it doesn't show up no matter what I do.
    I consider myself fairly knowledgeable with GPOs but I'm stumped on this one. Can someone tell me what I'm missing here?

    Hi, 
    Have you copied the ADML files to the language folder in the PolicyDefinitions folder?
    Checkout the below thread on similar discussion,
    office 2013 admx templates
    Regards,
    Gopi
    www.jijitechnologies.com

  • Can't see ADMX files in Group Policy Editor

    I have a problem with ADMX files on my Server 2008 r2 group policy. I start by going to group policy editor. Then I browse to Computer Policy and then Administrative Templates. There is nothing in there... Which is weird... There has always been stuff there...
    So, then I go in to add templates back in... I find the ADMX files in C:\Windows\Policy Definitions and also \\domain\SYSVOL\domain\Policies\PolicyDefinitions and go to Add/Remove Templates. I click add and then browse to either directory (which has ADMX files
    in them!) and see nothing. ADM files I can see fine. But ADMX I can't see. So, I see these links:
    2008 R2 Server GP can't see admx files
    I can't see admx files
    Looking at them, they both say I should be able to see ADMX files in the central store...So I manually copy the ones in C:\Windows\Policy Definitions to the SYSVOL central store. Restart group policy editor... Nothing there when I browse the settings...
    Still not able to add templates.
    It looks like group policy editor doesn't know about ADMX files at all... Is there a registry setting or something that "enables" the ADMX files?
    Thanks,
    Scott

    In gpedit / gpmc, the menu item : "Action -> Add/Remove Templates", is only applicable/useful for the older/legacy ADM files - the menu item isn't relevant for ADMX/ADML files at all.
    The most common reason for an "empty" list of Administrative Templates settings, is an incorrect configuration of the Central Store.
    The usual guidance tells us to place ADMX files here, to setup a CS:
    \\domain\SYSVOL\domain\Policies\PolicyDefinitions\
    This folder/file structure has to mimic what you would see at: C:\Windows\PolicyDefinitions\
    If your domain is named contoso.com, you would need this:
    contoso.com\SYSVOL\contoso.com\Policies\PolicyDefinitions\
    In that folder, reside your ADMX files.
    You also need the relevant locale subfolder, and in there, you need the matching ADML files.
    The best way to establish that, is to go to  C:\Windows\PolicyDefinitions\ on your RSAT PC, or DC, and copy all the contents including subfolders and files, into the equivalent folder of your CS.
    Then exit GPMC (if you had it opened), and re-launch GPMC. No need to to anything else in GPMC, it will automatically, by default, look for a CS first, and, if no CS is found, will revert to the local policydefinitions folder structure.
    But, if the CS folder structure exists *AND* is incomplete or incorrect, you will get your symptom.
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • How to install admx files

    hi all,
    i have found the admx files i need for a task iv been asked to do. However once the files are downloaded how do install the admx files?
    Thanks

    > store. Can i simply copy one admx file for IE10, or do i have to copy
    > everything?
    Everything - the whole local %windir%\policydefinitions folder.
    > 2. Noticed there are various versions of the template available for
    > download. There is 2008 R2 version, and 2012 version. As i am using 2008
    > R2 SP1, should i be using the latest 2012 version? or doesn't matter
    > which one i use?
    Use the version you need for your target OS. If your clients are running
    Win8, use 2012 and Win8.
    > 3. Apparently you can also install the templates into your local WIN7 PC
    > as well. However, if i do this, and then launch GPMC from WIN7, and
    > decide to make a change to one of the policies, will this change
    > actually take affect in the domain?
    Yes. ADMX only defines the UI in gpedit, not the real "content" of GPOs.
    > local workstations to Sysvol in AD. So if this is the case, what is the
    > purpose of being bale to install the templates in your local workstation?
    One example: In Win7, MS introduced the ability in ADM templates to
    write REG_MULTI_SZ. Vista doesn't understand this ability. So, if you
    use a central store AND have both Vista and Win7 clients AND you
    populate the central store with Win7 ADMX, you cannot edit ADM templates
    on Vista anymore...
    >
    > Thanks!!
    >
    > DM
    >
    > -----
    >
    http://social.Technet.microsoft.com/Forums/en-US/winserverGP/thread/9411f3e6-d189-4410-8ee7-5d3f15afe857#e2ab591b-2d4c-4cde-bc3a-0588eaec044a
    > -----
    >
    Martin
    Mal ein Buch über GPOs
    <http://www.amazon.de/Windows-Server-2012--8-Gruppenrichtlinien/dp/3866456956>
    lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing: Good or bad GPOs?
    <http://evilgpo.blogspot.com>
    And if IT bothers me - coke bottle design refreshment
    <http://sdrv.ms/14t35cq> :))
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • Process.start("winword", filename) can not open file with space in the path and name

    Hi,
    I am trying to write a class which can open file with selected application. for simplicity, now I just hard code the varaibles.
    the problem: if the path or file name has space in it, even it exist, winword still can not open it.
    could someone kindly show me what I did wrong and how to do it properly.
    Thanks in advance.
    Belinda
    public static class FileOpen
    public static void info()
    string path = @"c:\a temp folder\aaa 1.txt";
    if (File.Exists(path))
        // the file I am using in the sample does exist
         MsgBox.info("yes");
    else
         MsgBox.info("no");
    // working
    //Process.Start("winword", "c:\\aaa.txt");
    // not working
    //Process.Start("winword", "c:\aaa.txt");
    // not working
    Process.Start("winword", "c:\\a temp folder\\aaa 1.txt");
    // not working
    Process.Start("winword", path);

    string AppPath;
    AppPath = ReadRegistry(Registry.CurrentUser, "Software\\FabricStudio", "TARGETDIR", value).ToString() + @"help";
    string FileName = "'"+ AppPath + "\\ImageSamples.doc" + "'";
    try
    System.Diagnostics.Process.Start("Winword.exe", FileName);
    can any body please help for this.
    where i am making mistake?

  • I have created a .m4v file from iPhoto and would like to share it with someone else knowing that the file is quiet large (86 Mo), i used to share file with mobileme, how Can I do that with iCloud ? or another way....

    In iphoto, I have create a diaporama which I exported to itunes as a m4v file. I would like to share this file with someone but it is too big to send it via email (84 Mo). This file is now in my films in itunes. Is there a way to share it via icloud.
    I used to share files using mobileme which I cannot use anymore.
    Thanks for your help,
    Eric

    How recently did you switch?  If it's less than 60 days, then Verizon simply reinstates your previous account.  The fact that you were on the EDGE plan and mailed the devices back, and they apparently are somewhere in the system, could cause complications, and it might just work out that you just go back on the same plan and they set you up with the same devices.  I'm not sure how it will go - but since you are still being billed for the devices... 

  • I can no longer access a password protected Numbers file with the correct password. Error message only says the file "cannot be opened."

    I'm using Numbers version 3.2.2.
    Suddenly I cannot access my password protected Numbers file with the correct password. I have the correct password written down so I know I haven't made a mistake.
    The response box that pops up says that the file cannot be opened. There are no other options for me to choose from.

    Also, I tried to open it through an older version of Numbers but it sent this error message.

  • MY system folder, including hidden folders are littered with duplicate folders and files with the suffix (from old Mac) How do I remove them

    I have a Macbook Pro running Leopard 10.5.8. I had a problem with my my operating system (my fault, I moved a file I shoudnt have) couldnt boot up but was able to boot up from a backup. I managed to repair my original system except now all the system folders, including hidden folders are littered with duplicate folders and files with the suffix (from old Mac).  For the most part the dupes are an exact copy, but not always.  I want to remove them to free up space and cant imagine duplicate folders in the /system/library are not hindering my computer. But I dont know where to start and am afraid of doing irreparable damage. Any ideas

    pacull,
    Use iCal>View>Show Notifications to choose what to do with the notification.

  • I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

    I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

    Hold down the Option key while you boot your Mac. Then, it should show you a selection of devices. Click your flash drive and it will boot from that.

  • How to send multiple files with it's original name over HTTPS using one CC?

    I am working on a File to HTTPs scenario. It is in production and working fine. Currently we send only one file and I have hard coded the name in the communication channel in the header fields. Now we have to send more files with different names and I want to use only one receiver channel instead of many. We need to send the files with their original names.
    I used the ASMA in the sender File Adapter and I see the FileName in the dynamic configuration under http://sap.com/xi/XI/System/File name="FileName".
    I know we can use a UDF in message mapping and get the value and put it in HEADERFIELDONE. But we don't want to use mapping as the files are huge and we don't want to insert XML tags in the payload.
    So how do I put the Filename from the DynamicConfiguration to the HTTP header field as FileName without using mapping? Are there any settings?
    Can I put something in the PROLOG or can I use any other module in the File Sender Adapter or is there any other option?
    Any help is appreciated.
    Thanks
    Sai

    See my blog:
    /people/stefan.grube/blog/2009/06/19/unknown-use-case-of-dynamicconfigurationbean-store-file-name-to-jms-header-without-mapping
    You have to put the configuration in sender channel, as HTTP adapter does not allow modules.
    For the second module, put values related to HTTP adapter.

  • Archive file with errors in sender file adapter not working! please help!

    Hi Experts,
       I have a file to RFC scenario. the input is a XML file. I have setup the flag in sender file adapter channel for archiving the input files with errors. But it is not working.
    For testing I have used an invalid xML file for example without the main XML tag. I have also tested with a MSWORD file saved with.xml extension. But in both the cases the files are not getting archived.
    My archive location permissions are fine and in fact normal archive operation is happening. That is, if I select the processing mode as "Archive" and gave the Archive directory then files are getting archived. The problem is only with the "Archive faulty source files" option.
    What am I missing? DO I need to do some more configurations?
    What are the prerequisites if any for this option?
    How to test this?
    Please help me! I will be greatfull to you all!
    Thanks & Regards
    Gopal

    and go thru this links
    Creating a Single Archive of the Version Files
    http://help.sap.com/saphelp_nw04/helpdata/en/79/1e7aecc315004fb4966d1548447675/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/31/8aed3ea86d3d67e10000000a114084/frameset.htm
    Note: reward points if solution found helpfull
    Regards
    Chandrakanth.k

  • Error (InvalidArgsError) when Printing to a file with Adobe Acrobat 9.0 Interop SDK

    Hi,
    i am getting a error (Invalid arguments) when trying to print to a file with the Adobe Acrobat  SDK 9.0. When i use Adobe Acrobat 7.0 it works correctly. I set the fileName Property as follow:
    printerParamsType.InvokeMember("fileName", BindingFlags.SetProperty, null, printerParams, new object[] { path2RawFile });
    fileName has the value:  /c/temp/Rawfiles/df76eccc-2465-4f60-a4e7-d11d8da6ed64.prn
    [9464] System.Reflection.TargetInvocationException: Ein Aufrufziel hat einen Ausnahmefehler verursacht. ---> System.Runtime.InteropServices.COMException (0x000003E9): InvalidArgsError: Invalid arguments.
    thanks

    Hello,
    I'm sorry you're having trouble with Acrobat. Unfortunately,
    these forums are specific to the
    Acrobat.com website and its set of hosted services, and do
    not cover the Acrobat family of desktop products.
    Any questions related to the Acrobat family of desktop
    products would be best suited in the Acrobat Forums:
    Link to
    Acrobat Forums
    Thanks!
    Michelle

  • Photoshop CS3 shuts down after opening a PSD file with layers

    Hello, I have met a problem with Photoshop CS3 (Windows XP SP2, no network printer) - after opening a PSD file with layers (saved with CS2) Photoshop shuts down. No error message.
    Can some of you help me? (The only software that I have installed after Creative Suite CS3 is Corel X4. I have installed no upgrades of CS3.)

    > I have installed no upgrades of CS3
    You should!
    Even if it doesn't help here you should.

  • Adobe Creative Cloud - How To Share Files With Clients and Colleagues | Creative Suite Podcast: Designers | Adobe TV

    In this episode of the Adobe Creative Suite Podcast, Terry White shows how to share Photoshop, Illustrator and InDesign Files with clients and colleagues and all they'll need is a browser to comment and see your Photoshop Layers.
    http://adobe.ly/10ZjpE4

    Terry,
    I guess I miss something. How can I share a folder of photos? When I return from a shoot, I select 20 of the pictures and need to share them with my client to pick up the favorites. Am I supposed to copy and past an URL for each image separately?
    Sometimes I also work with a colleague, I need to share my favorites with him. Same issue.
    We have tried Adobe Cloud, and then went for Dropbox. There we can share a folder and he can put even his pictures in it as well. That's what I call collaboration. And it is free (unlike Adobe Cloud). If you have some word in Adobe, please tell them to either drop it and make a deal with services like Dropbox, or make it properly.
    Thanks.
    Vaclav

  • Hi Apple Team, my iphone can't share files with my macbook pro. But other devices can share bluetooth files with my mac book pro. Please, kindly open up bluetooth to accept all connections from all devices. Now it becoming difficult for me to share.

    Hi Apple Team, my iphone can't share bluetooth files with my macbook pro. But other devices can share bluetooth files with my mac book pro. Please, kindly open up bluetooth to accept all connections from all devices. Now it difficult for me to share bluetooth files from my mac bookpro to my iphone, unless i attached it through email.
    We need it to be acceptable to all devices.
    Thank you!

    You can tell Apple directly at the link below.
    http://www.apple.com/feedback/iphone.html

Maybe you are looking for