MBAM 2.5 integrated with SCCM 2012 SP1 compliance issue

Hi,
I have installed MBAM 2.5 in a SCCM integrated topology. GPO for encryption on the OS drive only have been deployed and encryption completed using the MBAM client. When running the compliance report and evaluating using the SCCM client the compliance comes
back as non-compliant. I have tried several tweaks to the GPO but had no luck getting it to report as compliant. Using the dashboard report to try and pin point why it is non-compliant shows as non-compliant but using the reasons in the top right corner all
have 0 instances.
Is there a log file on the local system that can tell me what aspect is causing the status?

In the Event Viewer, there is MBAM node, you will find all MBAM client events there.
Also, review your GPO and see what encryption types are allowed and which are required. Maybe one reason would be, that your GPO requires something, which your client hasn´t done yet, like PIN code.
I´ve seen issues with not being compliant to policy before, and there was some explanations of this, if you google around. I´m also intrested to get knowing this, because I couldn´t solve this compliance issue.
For customer reporting, I just did query in SCCM where I listed ecrypted status and drive letters, that was a "customized report method" to tell customer, are all their Computers encrypted or not.

Similar Messages

Airwatch MDM integration with sccm 2012

I want to integrate Airwatch MDM with SCCM 2012 SP1. I am not able to find out any documentation for the same. Can anybody help me with the said.
Thanks and Regards Deepak

There is an integration between AirWatch and ConfigMgr 2012. I've never used it so I can't comment on it.
https://tool.microsoftsca.com/Partner/?id=737
Watch the video here
http://airwatch.wistia.com/medias/7463a8aae8
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Will SCOM 2012 R2 co-exist with SCCM 2012 SP1

Hi. Sorry if the answer is obvious, but I need to ask...
Will SCOM 2012 R2 coexist with SCCM 2012 SP1?
We currently have SCOM 2007 R2 installed and we'd like to upgrade.
We installed SCCM 2012 close to 2 years ago and upgraded to SP1 last summer.
We had SCOM 2007 R2 integrated with SCVMM 2008 R2, but have upgraded to SCVMM 2012 SP1 recently - so there is nothing setup between SCOM and SCVMM.
There is currently nothing setup between SCOM and SCCM.
We're a single forest, single domain shop. Ideally, we'd like or System Center products to "work together", thus the question about the 2012 SP1 and R2 mix.
Thanks for any input. I appreciate your time and expertize. Joe.

Hi,
I concur with Alexey, a side note SCCM and SCOM do not use the same SQL Server.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Remote WSUS integration with SCCM 2012

Hi,
We are currently having WSUS already in place for Patching , but not used at all its just installed.
can remote WSUS be integrated with SCCM 2012 server which is on different server ? what is the best practice ? is it to have WSUS on same server as Primary server?
or I decommission it and install a new WSUS on same server as SCCM server.
what steps have to be taken care if remote WSUS is integrated ? any documents or steps to be taken care .
Thanks in Advance

When you install SUPs, they automatically configure the underlying WSUS instance to sync from an upstream server based upon your ConfigMgr hierarchy.
A couple of notes here though:
- You generally shouldn't use an existing instance of WSUS for ConfigMgr. Once integrated into ConfigMgr, WSUS should no longer manage approvals, update binary downloads, or update binary distribution as these are all handled by ConfigMgr separate from WSUS.
Using an existing WSUS instance where this was the case can be problematic at best and will cause unexpected behavior and results.
- Clients do not choose SUPs based upon boundaries or location so using a remote SUP is typically not beneficial and in many cases will cause additional network load. The exception to this is if the SUP is within a secondary site.
Jason | http://blog.configmgrftw.com | @jasonsandys

Does Powershell 3.0 / Wmf 3 runs flawlessly with SCCM 2012 SP1

Hi the title says it all:
Does Powershell 3.0 / Wmf 3 runs flawlessly with SCCM 2012
SP1?
Thanks, Rob

Hi Rob,
WMF3 is required for ConfigMgr 2012 SP1:
http://support.microsoft.com/kb/2801416
(I posted the same link in your thread in the PowerShell forum).
Don't retire TechNet! -
(Don't give up yet - 12,575+ strong and growing)

MDT 2013 Integration with SCCM 2012 R2

Hi all,
Can we export the Drivers from MDT & import in into SCCM after the integration of MDT with SCCM.
We were having MDT 2012 update 1 in our environment & not we have integrated MDT 2013 with SCCM so can we export the drivers from MDT 2012 Deployment share & import it in SCCM 2012 R2.
Thanks,
Pranay.

Not really importing and exporting. Just re-use the content of the drivers and import them in ConfigMgr.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Integration with SCCM 2012?

Does anyone have any experience in integrating SCCM 2012 with VSM? Any documents or learnings from an asset management standpoint so that the CMDB can be populated?
Thanks in advance.

Hi Chris,
Only the VMware documentation I'm afraid, which isn't at all comprehensive but is enough to get going I think.
I don't know how familiar you are with integration and the federated cmdb so forgive me if you have all this already, but check out the downloads section (https://my.vmware.com/group/vmware/details?downloadGroup=SM_919_DOC&productId=171&rPId=5685) and look for:
VMware Service Manager connector for Microsoft SCCM Technical Notes (VSM_90_Connector_for_SMS_SCCM_TN_v1.0.3.pdf)
Connector Installation Guide (vsm-91-connector-guide.pdf)
Integration Platform Configuration Guide (vsm-91-integration-platform-config-guide.pdf)
Check those out and if you have any questions, do shout and I'll do my best to help if I can!

Is there Java API available for third-party integrations with SCCM 2012? I went through the "Developer's Survival Guide", and it seems that SCCM 2012 SDKs only support C# and PowerShell

Hi All,<o:p></o:p>
My team and I are developing a software using java that works closely with IT management software such as SCCM. Our software will be highly dependent on data stored in SCCM. Basically
our software will talk to SCCM to get information about a system managed by SCCM. To be able to do that, our software needs to use a java API that talks to SCCM. Is there a java API for SCCM 2012 that we can use? If there is not, what is the work around to
this issue (integrate a java project with SCCM SDKs)? Any help is appreciated! Thanks!<o:p></o:p>

Hi,
As you mentioned, it seems that there is no available Java API for SCCM .
Just curious, what's information you want to get from SCCM.
Based on my experience, you could query the SCCM site database to get almost all the information.
Otherwise, your question seems to be related to SCCM 2012. You may also choose to post there to get more effictive help.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

OoB Problems with SCCM 2012 SP1 CU1

Hi around, perhaps somone has tried this things out already and has a little hint for me.
After we got OoB Managment to work under SCCM 2007 we switched to SCCM 2012 now i have some problems bringing it to work again.
We use a Verisign Certificate for Provisioning, the Firewall Ports (9971 on Server and 19992, 16993 and 16995 on Client) are opend. The autoenrollment is active. DHCP 06 and 15 are set and configured.
The IIS SSL Settings are configured to accept Client Certificates and the Bindings are set to the Web Server Template. We tried to configure it using the Verisign Certificate but it didn't work that way either.
The Webserver Template is build after the Step by Step guide from MS.
The Verisign Certificate was build the same way, Organization Unit is set to Intel(R) Client Setup Certificate. It was imported in the Personal Certificate Store, exported and implemented in the Enrollment Point.
The AD Group exists and the Oob Managment Server has the permissions it needs.
The Oob Managment Point was configured like shown in the MS Step by Step guide.
The Client i'm testing with was fully unprovisioned.
Now the only Status i get is detected and when i try to discover AMT the amtopmgr.log brings the following errors.
Error 0x80090304 returned by InitializeSecurityContext during follow up TLS handshaking with server. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
**** Error 0x1e5ab3d0 returned by ApplyControlToken SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
DoSoapDiscovery failed with user name: admin. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Error 0x80090304 returned by InitializeSecurityContext during follow up TLS handshaking with server. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
**** Error 0x1e5ab3d0 returned by ApplyControlToken SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
DoSoapDiscovery failed with user name: admin. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Flag iWSManFlagSkipRevocationCheck is not set. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
session params : https://OurMachine.test.de:16993 , 11001 SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
ERROR: Invoke(get) failed: 80020009argNum = 0 SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Description: A security error occurred SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Error: Failed to get AMT_SetupAndConfigurationService instance. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
DoWSManDiscovery failed with user name: admin. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Flag iWSManFlagSkipRevocationCheck is not set. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
session params : https://OurMachine.test.de:16993 , 11001 SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
ERROR: Invoke(get) failed: 80020009argNum = 0 SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Description: A security error occurred SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Error: Failed to get AMT_SetupAndConfigurationService instance. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
DoWSManDiscovery failed with user name: admin. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Start Kerberos Discovery SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Flag iWSManFlagSkipRevocationCheck is not set. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
session params : https://OurMachine.test.de:16993 , 484001 SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
ERROR: Invoke(get) failed: 80020009argNum = 0 SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Description: A security error occurred SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Error: Failed to get AMT_SetupAndConfigurationService instance. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
DoKerberosWSManDiscovery failed. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Flag iWSManFlagSkipRevocationCheck is not set. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
session params : https://10.37.135.52:16993 , 15001 SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
ERROR: Invoke(get) failed: 80020009argNum = 0 SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Description: A security error occurred SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Error: Failed to get AMT_SetupAndConfigurationService instance. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
DoWSManDiscovery failed with user name: admin. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Flag iWSManFlagSkipRevocationCheck is not set. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
session params : https://10.37.135.52:16993 , 15001 SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
ERROR: Invoke(get) failed: 80020009argNum = 0 SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Description: A security error occurred SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Error: Failed to get AMT_SetupAndConfigurationService instance. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
DoWSManDiscovery failed with user name: admin. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Discovery to IP address 10.37.135.52 succeed. AMT status is 1. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
CSMSAMTDiscoveryTask::Execute, discovery to OurMachine succeed. AMT status is 1. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
CSMSAMTDiscoveryTask::Execute - DDR written to D:\CM2012\inboxes\auth\ddm.box SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
CStateMsgReporter::DeliverMessages - Queued message: TT=1201 TIDT=0 TID='Unspecified' SID=10 MUF=0 PCNT=1, P1='OurMachine.test.de' P2='' P3='' P4='' P5='' SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
CStateMsgReporter::DeliverMessages - Created state message file: D:\CM2012\inboxes\auth\statesys.box\incoming\vww2tcjc.SMX SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
General Worker Thread Pool: Succeed to run the task OurMachine.test.de. Remove it from task list. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
General Worker Thread Pool: Work thread 3624 has been requested to shut down. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
General Worker Thread Pool: Work thread 3624 exiting. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
General Worker Thread Pool: Current size of the thread pool is 0 SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 9236 (0x2414)
We double checked the admin Account in the OOB settings but the password is right and i can manually log in to the MEBX with it.
Has anyone some suggestions what could be wrong?
Thank's for the help.

Yes, I know this is an old post, but I’m trying to clean them up.
Did you solve this problem, if so what was the solution?
By the sounds of thing the problem is with your certificate. Can you manually provision a Certified to any of these systems?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Remedy CMDB Integration with SCCM 2012

We are facing an issue with duplicate entries of Hostname after remedy is integrated with SCCM2012.We have created custom view in SQL database which mapped to remedy database.Below is the query used for the integration.Can I get any help on this?
SELECT DISTINCT
                      dbo.v_GS_COMPUTER_SYSTEM.Name0, CASE WHEN v_GS_SYSTEM_ENCLOSURE.ChassisTypes0 IN ('3', '4', '6', '7', '15')
                      THEN 'Desktop' WHEN v_GS_SYSTEM_ENCLOSURE.ChassisTypes0 IN ('8', '9', '10', '21') THEN 'Laptop' WHEN v_GS_SYSTEM_ENCLOSURE.ChassisTypes0
IN ('1')
                      THEN 'VDI' WHEN v_GS_SYSTEM_ENCLOSURE.ChassisTypes0 IN ('2', '17', '23') THEN 'Server' END AS Chassis, dbo.v_GS_PC_BIOS.SerialNumber0,
                      dbo.v_GS_COMPUTER_SYSTEM.Manufacturer0, dbo.v_GS_COMPUTER_SYSTEM.Model0, dbo.v_GS_OPERATING_SYSTEM.Caption0,
                      dbo.v_GS_OPERATING_SYSTEM.CSDVersion0, dbo.v_GS_SYSTEM_CONSOLE_USAGE_MAXGROUP.TopConsoleUser0,
                      dbo.v_R_System.User_Name0 AS [Last Logged], dbo.v_GS_PC_BIOS.ReleaseDate0, dbo.v_GS_NETWORK_ADAPTER_CONFIGUR.IPAddress0,
                      dbo.v_R_System.AD_Site_Name0, dbo.v_GS_NETWORK_ADAPTER_CONFIGUR.DefaultIPGateway0, dbo.v_GS_X86_PC_MEMORY.TotalPhysicalMemory0,
                      dbo.Processor_DATA.Name00, dbo.Processor_DATA.Manufacturer00 AS Expr2, dbo.Processor_DATA.ProcessorType00, dbo.Processor_DATA.NumberOfCores00,
                      dbo.CH_ClientSummary.LastHW, dbo.CH_ClientSummary.LastSW, dbo.v_R_System.Last_Logon_Timestamp0, dbo.v_GS_COMPUTER_SYSTEM.Domain0
FROM         dbo.v_GS_PC_BIOS INNER JOIN
                      dbo.v_GS_COMPUTER_SYSTEM ON dbo.v_GS_PC_BIOS.ResourceID = dbo.v_GS_COMPUTER_SYSTEM.ResourceID INNER JOIN
                      dbo.v_GS_NETWORK_ADAPTER_CONFIGUR ON dbo.v_GS_COMPUTER_SYSTEM.ResourceID = dbo.v_GS_NETWORK_ADAPTER_CONFIGUR.ResourceID INNER JOIN
                      dbo.v_GS_OPERATING_SYSTEM ON dbo.v_GS_OPERATING_SYSTEM.ResourceID = dbo.v_GS_COMPUTER_SYSTEM.ResourceID INNER JOIN
                      dbo.v_R_System ON dbo.v_GS_COMPUTER_SYSTEM.ResourceID = dbo.v_R_System.ResourceID LEFT OUTER JOIN
                      dbo.v_GS_SYSTEM_CONSOLE_USAGE_MAXGROUP ON
                      dbo.v_GS_COMPUTER_SYSTEM.ResourceID = dbo.v_GS_SYSTEM_CONSOLE_USAGE_MAXGROUP.ResourceID INNER JOIN
                      dbo.v_GS_SYSTEM_ENCLOSURE ON dbo.v_GS_COMPUTER_SYSTEM.ResourceID = dbo.v_GS_SYSTEM_ENCLOSURE.ResourceID INNER JOIN
                      dbo.v_GS_X86_PC_MEMORY on (dbo.v_gs_x86_pc_memory.ResourceID = .v_GS_COMPUTER_SYSTEM.ResourceID) inner JOIN
                      dbo.Processor_DATA ON dbo.Processor_DATA.MachineID = dbo.v_R_System.ResourceID INNER JOIN
                      dbo.CH_ClientSummary ON dbo.CH_ClientSummary.MachineID = dbo.v_R_System.ResourceID
WHERE     (dbo.v_GS_NETWORK_ADAPTER_CONFIGUR.IPEnabled0 = 1) AND (NOT (dbo.v_GS_NETWORK_ADAPTER_CONFIGUR.DefaultIPGateway0 IS NULL)) AND (dbo.v_GS_X86_PC_MEMORY.TotalPhysicalMemory0 >=512)
Thanks,
Shijil

Thank you Nash for your help.
I tried with dbo.v_R_System_Valid as suggested, still the same result.Is there any way to filter duplicate computer name in this query?
Below is the query.
SELECT
DISTINCT
dbo.v_R_System_Valid.Netbios_Name0,
CASE WHEN v_GS_SYSTEM_ENCLOSURE.ChassisTypes0
IN ('3',
'4',
'6', '7',
'15')
THEN 'Desktop'
WHEN v_GS_SYSTEM_ENCLOSURE.ChassisTypes0
IN ('8',
'9',
'10', '21')
THEN 'Laptop'
WHEN v_GS_SYSTEM_ENCLOSURE.ChassisTypes0
IN ('1')
THEN 'VDI'
WHEN v_GS_SYSTEM_ENCLOSURE.ChassisTypes0
IN ('2',
'17',
'23') THEN
'Server' END
AS Chassis, dbo.v_GS_PC_BIOS.SerialNumber0,
dbo.v_GS_OPERATING_SYSTEM.Caption0,
dbo.v_GS_OPERATING_SYSTEM.CSDVersion0, dbo.v_GS_SYSTEM_CONSOLE_USAGE_MAXGROUP.TopConsoleUser0,
dbo.v_R_System.User_Name0
AS [Last Logged], dbo.v_GS_PC_BIOS.ReleaseDate0, dbo.v_GS_NETWORK_ADAPTER_CONFIGURATION.IPAddress0,
dbo.v_R_System.AD_Site_Name0, dbo.v_GS_NETWORK_ADAPTER_CONFIGURATION.DefaultIPGateway0,
dbo.v_GS_X86_PC_MEMORY.TotalPhysicalMemory0,
dbo.Processor_DATA.Name00, dbo.Processor_DATA.Manufacturer00
AS Expr2, dbo.Processor_DATA.ProcessorType00, dbo.Processor_DATA.NumberOfCores00,
dbo.CH_ClientSummary.LastHW, dbo.CH_ClientSummary.LastSW,
dbo.v_R_System.Last_Logon_Timestamp0
from
dbo.v_GS_PC_BIOS
inner JOIN
dbo.v_R_System_Valid
ON dbo.v_GS_PC_BIOS.ResourceID
= dbo.v_R_System_Valid.ResourceID
INNER JOIN
dbo.v_GS_NETWORK_ADAPTER_CONFIGURATION
ON dbo.v_R_System_Valid.ResourceID
= dbo.v_GS_NETWORK_ADAPTER_CONFIGURATION.ResourceID
INNER JOIN
dbo.v_GS_OPERATING_SYSTEM
ON dbo.v_GS_OPERATING_SYSTEM.ResourceID
= dbo.v_R_System_Valid.ResourceID
INNER JOIN
dbo.v_R_System ON dbo.v_R_System_Valid.ResourceID
= dbo.v_R_System.ResourceID
LEFT outer
JOIN
dbo.v_GS_SYSTEM_CONSOLE_USAGE_MAXGROUP
ON
dbo.v_R_System_Valid.ResourceID
= dbo.v_GS_SYSTEM_CONSOLE_USAGE_MAXGROUP.ResourceID
INNER JOIN
dbo.v_GS_SYSTEM_ENCLOSURE
ON dbo.v_R_System_Valid.ResourceID
= dbo.v_GS_SYSTEM_ENCLOSURE.ResourceID
INNER JOIN
dbo.v_GS_X86_PC_MEMORY
on (dbo.v_gs_x86_pc_memory.ResourceID
= .v_R_System_Valid.ResourceID)
inner JOIN
dbo.Processor_DATA
ON dbo.Processor_DATA.MachineID
= dbo.v_R_System.ResourceID
inner JOIN
dbo.CH_ClientSummary
ON dbo.CH_ClientSummary.MachineID
= dbo.v_R_System.ResourceID
WHERE
(dbo.v_GS_NETWORK_ADAPTER_CONFIGURATION.IPEnabled0
= 1)
AND (NOT
(dbo.v_GS_NETWORK_ADAPTER_CONFIGURATION.DefaultIPGateway0
IS NULL))
AND (dbo.v_GS_X86_PC_MEMORY.TotalPhysicalMemory0
>=512)
Thanks,
Shijil

Issue with SCCM 2012 SP1 U5 upgrade and client published version

Recently we upgraded our SCCM server to SP1 U5, and our published and available client version is still at 5.00.7804.1000 instead of 5.00.7804.1600. We ran the hotfix to upgrade it and it looked like everything had went through. Does this not also
upgrade the client? It doesn't seem like you can run the hotfix again after you've already installed it once to repair either. Is there another way to update the published version inside the console? We have it as a package right now to deploy to all the systems
but I was hoping we could upgrade the internal one and let it run more automatically. Any advice would be greatly appreciated.

More info:
How to update ConfigMgr clients automatically… in SP1
http://configmgrblog.com/2012/12/03/how-to-update-configmgr-clients-automatically-in-sp1/
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCCM 2012 SP1 - Driver Issue

Hi,
I have weird issue while building a tough book machine (CF19 Mark 7)
When i import and deploy the drivers as part of task sequence, all the drivers are getting applied but the screen resolution is completely blurring but if i change the monitor to true colour it works fine.
I verified the display adaptor which has standard VGA adaptor. Is this driver causing the issue and i am not sure. Please advice
Regards, Pratap

Hi,
It sounds like either the Display adapter driver did not install or is not included in a correct format in the drivers you imported. If you update the driver on the installed compouter using device manager from the drivers you imported does it work then?
Regards;
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

SCCM 2012 patch compliance issue

Hi All,
In my organization we are facing patch compliance issue.
in my clients all patches are installed and sent the state messages to MP.however most of the clients are having 0% compliance are showing in report.
in overall compliance report it is showing "compliance sate unknown" for most of the clients.
done the software update scan cycle, no errors in WUAhandler.log and windowsupdate.log
updatestore.log etc.files. however same location only few machines are showing 100% compliance and most of the machines are showing non-compliance (0% compliance)
please help us to resolve the issue.
Note: all machines are patches installed successfully. only report is showing "compliance state unknown"

How much time are you allowing? State messages are only submitted every 15 minutes by the client and information in the console is summarized every 1 hour (both by default); i.e., none of this is instantaneous.
Reports will reflect the up to info though. Have you directly examined WMI on a target system to verify it's patch compliance state?
Jason | http://blog.configmgrftw.com | @jasonsandys

Migrating MBAM 2.0 Integration from SCCM 2007 R3 to SCCM 2012 R2

Hello--
We are preparing to migrate our client base from SCCM 2007 to SCCM 2012 R2. We have MBAM 2.0 integrated with SCCM 2007 and need to know what steps/process is needed to successfully move the integration over to SCCM 2012.
I know that the .mof files need to be modified, but what else do we need to do? Re-run the SCCM Integration Setup on the MBAM SQL Server and SCCM Server?
Any help would be much appreciated!
Thank you!
Matt

TPM ownership info is hit or miss. I personally have never had to use it, but I now that we have a few machines that get configured incorrectly and we have to manually initialize and take ownership of the TPM, so that information does not make into MBAM.
How would we go about moving the DB? I agree that building the new implementation sounds desirable.
Thanks!
Matt

Migrate SCCM 2012 SP1 VM to another different host VM

1. I have a server name BACKOFFICE is has way too much work load including SCCM 2012.
2. I created a new VM called SCCMSERVER, I want to migrate SCCM 2012 off BACKOFFICE VM to the new SCCMSERVER VM.
3. BACKOFFICE still remain in production as other programs & services are running, just need to get rid of the SCCM server task.
What is the best practice for this task?
Thank you very much for your help!

Hi,
1. if you change the name of your server you'll have to change sitecode also and therefore you'll also have to change the Database name so your old database won't be useful.
SQL License is included with SCCM 2012 as long as you use Standard Edition i guess (someone correct me if i'm wrong)
2. The tool is integrated with SCCM 2012.
You can run the migration jobs to retrieve data from your old CM2012 SP1 to your new environment.

MBAM 2.5 integrated with SCCM 2012 SP1 compliance issue

Similar Messages

Maybe you are looking for