MBAM 2.5 InvalidKeyID Fault

Hello,
I have implemented MBAM 2.5 on my customers site and currently in testing phase. I am getting an error when trying to recover a Recovery Key from the Recovery Key ID.
I have a 3 server topology with SCCM integrated features, a database server and a Administration and Monitoring Server.
2 client are encrypted and I can see the data in the RecoveryAndHardwareCore.Keys table in the MBAM recovery and Hardware Database
When using the MBAM Self Service website I attempt to put in my recovery ID and state reason for Recovery Key (lost Pin etc)
The recovery time takes about 1 minute before returning the message "Invalid Key ID"
I have tested the recovery key this by writing the Recovery Key direct from the sql table in to the recovery screen which worked successfully and allowed me to boot.
so my issue is getting the recovery key from the self service screen.
I have done a bit of research and found the following data in the log: C:\Inetpub\Microsoft BitLocker Management Solution\Logs\Self Service website\Trace2014-07-29_10-59-54.svclog and I receive the following error
Please can anyone help with why I am getting the recovery key and why I am getting "Failed to recover key, InvalidKeyId"
Thanks

Hey Lancecr - I'm having the same issue (installed without a certificate until we get that resolved).
No custom host name for the web server. Delegation has been set up on the app pool credentials.
Also, I checked the security logs on the SQL server, and I can see the service account for the app pool logging in successfully at the same time the error is generated. A few steps before the error occurs, I also see this error:
at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)
I also see several IIS-Configuration warnings for
Unable to find schema for config section system.serviceModel/bindings (or /client, /behaviors, etc) This section will be ignored.
There is also an error in the ISS-Configuration log (Event ID 10, user is the app pool account) - An error has occurred: Unrecognized element 'providerOption'
This is all I've been able to come up with so far, but I figured I would send it off and see if you had any thoughts or other places I could look.
Thanks!

Similar Messages

0x803d0013 Error occured sending encryption status (A fault was received from the remote endpoint)

Alright, I am stumped. I have looked at nearly every article on this error here at Technet and other sites:
An error occurred while sending encryption status data.
Error code:
0x803d0013
Details:
A message containing a fault was received from the remote endpoint.
First, I am testing this. I have copied the MDOP ADMX/ADML files directly to the client I am testing this on, and I am applying the policy via the Group Policy Management on the local machine. I am not deploying this via the domain. I wouldn't think that
would make a difference, but please let me know if I am wrong.
I have performed the following:
1. (DisableMachineVerification)
in MBAM registry as
is in this article http://support.microsoft.com/kb/2612822
2. On the MDOP group policy I have enabled:
I. Client Management
A. Configure MBAM Services
B. Configure user exemption policy
II. Fixed Drive
A. Fixed data drive encryption settings
B. Choose how BitLocker-protected fixed drives can be recovered
III. Operating System Drive
A. Operating system drive encryption settings
B. Choose how BitLocker-protected operating system drives can be recovered
IV. Removable Drive
A. Control use of BitLocker on removable drives
3.
On the MBAM Administration Server AD object, enable the “Trust for delegation for any service (Kerberos Only) option”, under the Delegation tab. Also,
the user has been granted delegation privileges for all of the services on the server.
4. SPN Records have been created for the server
5. HKLM\Software\Policies\Microsoft\FVE\MDOPBitLockerManagement
Change the ClientWakeUpFrequency = 1 and StatusReportingFrequency=1
Create a dword value “NoStartupDelay” under HKLM\Software\Microsoft\MBAM and set its value to 1.
Also, I did not encrypt my drive with MBAM. It was encrypted before hand. Is there anything I can check or do? The event logs on the MBAM server under MBAM-Web don't show anything under Admin or Operational.
I think my KeyRecoveryServiceEndPoint and StatusReportingServiceEndpoint URLs are correct:
https://mbam01.domainname.com:443/MBAMRecoveryAndHardwareService/CoreService.svc
https://mbam01.domainname.com:443/MBAMComplianceStatusService/StatusReportingService.svc
I even think there was a registry key to make the hardware compatible, but I don't remember which key it was, as I uninstalled and reinstalled, and don't remember where I found that on the forums.
Any suggestions?

If you have made changes to the web.config files to accommodate the SSL settings, you will not be able to browse the URLs with the http protocols. The URLs will then only work with the https protocols.
Could you please confirm the login created for the particular local groups with the following permission:-
For MBAM Compliance Auditing DB Access:-
User Mapping – MBAM Compliance Status
DB Role Membership – ComplianceWriteRole
Server Roles – Public
For MBAM
Recovery and Hardware DB access:-
User Mapping – MBAM Recovery and Hardware
DB Role Membership – RecoveryandHardwareReadRole, RecoveryandHardwareWriteRole
Server Roles – Public
Make sure the MBAM Computer account (MBAM Web Server) is a member of these two groups.
Gaurav Ranjan

BitLockered clients are not contacting MBAM others are

Hello, I have hundreds of clients that have bitlockered successfully and registered with MBAM but also have hundreds of machines that have encrypted and not checked in with MBAM.
Those that work under the eventlog MBAM -> operation show ids, 1 'applied policy' 19 'registered with MBAM' and 3 'encryption data send'. Those that don’t work only show id 1 'applied policy'.
It’s like the client will not attempt to talk to MBAM. all machines receive the same policy.
Why won’t they check in and how can I force it ??
Before anyone gives the generic answers. Yes i have changed the KeyRecoveryServiceEndPoint and StatusReportingServiceEndpoint to 1 and restarted the service.
By the way im using MBAM 2.0 - standalone not SCCM integrated with a 2 server setup on a single domain.

sure...
error 4 is:
An error occurred while sending encryption status data.
Error code:
0x803d0010
Details:
The remote endpoint was not reachable.
Error 2 is:
An error occured while applying MBAM policies.
Volume ID:\\?\Volume{c0e67f4d-ec35-11e3-8490-f0def17b504b}\
Error code:
0x803d0013
Details:
A message containing a fault was received from the remote endpoint.
Im starting to suspect local firewall. The machines are connected to the network at the time these errors are logged. I have checked i can ping the server from the client machines.

Macbook Pro issues - can anyone tell if 'normal' or faults

I have some issues with my new 15" 2.66 unibody (non-removable batery) MBP. I'm told by the retailer that they are all normal/common - i'd like see if this is actually the case or they fobbing me off.
1.) Something 'lose' inside the case around hard drive area - ie if i move the mac around (vertically is worst - ie imagine holding it with two hands with hinge sitting downwards, closed) i can hear something fairly hefty clunking back and forth against the inside of the shell (hard drive moving about?)
2.) When i opn the lid for the first time after a period of the mac being closed, i get a reasonable creak/crack from the left side of the screen hinge.
3.) When i run the battery down and it goes to sleep 'to preserve the contents of memory' it doesn't take long at all before battery so low it goes into deep sleep (ie state where all RAM contents are written to disk - and then takes a min or so to come to life again when you open the lid - my old macbook pro could last a good few hours in sleep mode before dying completely and deep sleeping
I'd really like to know if anyone has noticed similar issues with their machines - or if indeed these are isolated issues to a few, aka faults.
Thanks in advance

1.) Something 'lose' inside the case around hard drive area - ie if i move the mac around (vertically is worst - ie imagine holding it with two hands with hinge sitting downwards, closed) i can hear something fairly hefty clunking back and forth against the inside of the shell (hard drive moving about?)
The sudden motion sensor may make the appearance of something bouncing in there as it may activate while the drive is being moved around suddenly. However, if this does not appear to be the case, I'd ask an authorized service center.
2.) When i opn the lid for the first time after a period of the mac being closed, i get a reasonable creak/crack from the left side of the screen hinge.
Is the opening range different from other ones in the store?
3.) When i run the battery down and it goes to sleep 'to preserve the contents of memory' it doesn't take long at all before battery so low it goes into deep sleep (ie state where all RAM contents are written to disk - and then takes a min or so to come to life again when you open the lid - my old macbook pro could last a good few hours in sleep mode before dying completely and deep sleeping
The battery may need calibration at first:
http://www.apple.com/batteries/
If it is calibrated, and you aren't getting the life expected by that link for rudimentary usage, have the power manager looked at.

BT can actually fix broadband faults! (no I'm not ...

Just had to post this for anyone to read who have encountered problems with BT Broadband. Its been put onto an old thread but incase your new or never saw it here it is.
Anyone else seen the flying pigs all covered in snow?
It's finally happened, after 14 months, hours upon hours spent on the phone to Broadband No Support India Division, emails back and for with moderators and BT, 4 engineer visits and 3 emails to the chairmans office my broadbands been fixed. Yes thats right its not a mistype my broadband has actually been fixed.
I did try the noise line test as recomended by another forum member but I had no noise on the line.
After my last attempt to email the chairmans office (that and the short but blunt voicemail message I left too) I had a call from a new person who works in the chairmans office. This lady couldn't have been more helpful. She'd actually looked into my account and problems dating back to the day I joined BT Broadband back in January 2009 and was shocked to see some of the crazy and down right ridiculous things I'd been told and had to put up with. I was even more shocked when she knew exactly what an external NTE was. She listed to what I had to say and the long long list of what I'd tried over the 14 months and how even with 2 replacement hubs sent out nothing changed. She decided that from what I'd described it was a faulty hub issue. I have to admit when I was told this I was a bit apprehensive and wasn't expecting anything new to actually happen. Wrong!
Instead of just winging me out a new bog standard Type A Hub 2.0 she sent me out a new Hub 2.0 Type B. She explained how it was made by a different manufacturer and how it had a different chipset in it and that there had been customers who had found it solved there problems. I was dubious but I agreed to having one to try. 2 days later it arrived. Looks exactly the same as the 3 other hub 2.0 I have had in the past. I set it all up, switched it on and hey presto it burst into life. When it did burst into life there was no annoying loud clicking noise like with the Type A hubs. I logged into the Hub Manager and it appears to be more user friendly and pretty quick. For some unknown reason all previous Hubs upon connection would start with an Actual Data Transfer Speed of 100 odd mbps then almost immediately this would decrease down to 54 mpbs. Right away its showing as being 130mbps.
Tried logging back into Hub Manager later on and I was astonished to see that the Actual Data Transfer Speed was still showing as being 130mbps. Then I looked at the connection speed of all joined PCs, Laptop and Netbook to find they were all at 100mbps. This is something which had never been achieved before. Now I started thinking is this actually going to work? Yes, it did. Using the internet now is quicker than its ever been. My download speed has increased from approx 6mb up to a now steady 7mb and the upload speed is slightly quicker too. The lovely lady from the chairmans office rang back a few times to see how things were going and apologised everytime for the way my broadband problems and the support lines have been of no help/use. I told her under no way was I ever ringing India again and she said hopefully next year it'll all be back in the UK. (Fingers crossed folks)
Its now been 13days, 2 hours, 17 minutes & 51 seconds since switching to the Hub 2.0 Type B and I've had no flashing orange lights, no disconnections and none of those annoying 'Theres a problem with your broadband messages' appearing on my monitor. This is unheard of. If I'm lucky may go for a week without frequent disconnects (it did happen in summer 2009) but certainly no longer than that.
Its both great and disgusting at the same time. Yes its great that I now have the broadband service I've been paying for but disgusting that its taken 14 months to get it. That and the fact that despite all the bull excuses and comments on how its the phone line inside and its the electrical interference and that its a fault with all my PCs, laptops and netbooks etc that it is in fact down to that bloomin Hub!
Compensation is being looked into and should be forthcoming. I do not want to curse it but if these great speeds/transfer rates remain and I continue to be able to use my Broadband without that blasted constant clicking noise, flashing orange broadband light and frequent disconnections (deep breath) I may stay with BT.
Thanks to everyone whos suggested or commented on things to try.
No disrespect to the Mods on here but I did contact yourselves numerous times on the old BT Forums and got nowhere. The usual thing was to be told a line test had been done, no faults found now ring BT Broadband helpline. In my case no it wasn't a line fault it was rubbish BT Hubs 2.0 type A fault!
All I can recommend for anyone whos sick to the back teeth ringing India and getting nowhere with there broadband problems try using Google and searching for BT Chairmans email address and fire an email to them with details of your problems/experiences.
Good Luck

nice 1, i got my bb fixed today 2, after weeks of phone calls to india and 7 engieer visits and a letter to the chairman my bb its back up to 3.5 mbps, the only strange thing is my bb light gos orange every 2 hours im hoping this is just like the 10 days restart and not still a falut im just glad my dsl connetion rate is back up was at 1000 but now 4689 pls look at my home hub stats tell we what u see pls x oh im using the home hub 2.0 type A
Line state
Connected
Connection time
0 days, 0:11:54
Downstream
4,768 Kbps
Upstream
448 Kbps
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.1
Latency type
Fast
Noise margin (Down/Up)
5.8 dB / 20.0 dB
Line attenuation (Down/Up)
53.0 dB / 31.5 dB
Output power (Down/Up)
19.3 dBm / 12.8 dBm
Loss of Framing (Local)
68
Loss of Signal (Local)
8
Loss of Power (Local)
0
FEC Errors (Down/Up)
0 / 0
CRC Errors (Down/Up)
480 / 2147480000
HEC Errors (Down/Up)
nil / 7
Error Seconds (Local)
5

Adobe Bridge CS6 Stopped working. Fault Module Name: StackHash_0a9e

It's just typical. I'm up against a deadline and this happens.
If I try to open an image in Camera Raw, check the colour settings, get into the camera raw preferences this is the result:
Problem signature:
Problem Event Name:    BEX
Application Name:    Bridge.exe
Application Version:    5.0.2.4
Application Timestamp:    50d99f7a
Fault Module Name:    StackHash_0a9e
Fault Module Version:    0.0.0.0
Fault Module Timestamp:    00000000
Exception Offset:    0018f890
Exception Code:    c0000005
Exception Data:    00000008
OS Version:    6.1.7601.2.1.0.256.1
Locale ID:    2057
Additional Information 1:    0a9e
Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
Additional Information 3:    0a9e
Additional Information 4:    0a9e372d3b4ad19135b953a78882e789

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2

Unable to capture fault for Invoke actrivity invoking OA Adapter

Hi,
I have invoke activity that invokes oracle applications adapter and i have catch all and catch for process. But when invoke adapter returns exception my catch and catch all doesn't capture the faults. But when i use some other adapter like database adapter then catch captures fault and work normally.
Is it a bug or there are some other way we need to capture the faults in case of oracle applications adapater.
Any suggestion?

One more update i tried printing l_http_response.status_code and got 302.
Thanks,
PKV

How to handle RunTime Faults which doesn't list under System Faults?

Hi,
I have a doubt regarding runtime faults in BPEL 1.1.In BPEL 1.1 some of the run time faults are categorised as system faults.So we can handle those run time faults
using the faultname or namespace(http://schemas.oracle.com/bpel/extension) of system fault itself.But 'SublanguageExecutionFault' is a run time fault which doesn't list under system faults.
So what namespace it belongs to?Can we use the same namespace of system fault for this kind of runtime faults ?
Are any other runtime faults existing which don't have the same namespace of sytem faults?So how can we identify and handle those run time faults?

You can create a role menu as remote enabled remote menu.
The authority checks will happen on the remote side, also against objects which don't exist in the calling system as the music is on the other side.
On the RFC client system side, you only need the parameter transaction to start the remote transaction in the remote system.
See the documentation on SYST function module ABAP4_CALL_TRANSACTION.
This is however a rather antiquated technology... it is more popular to use a SAP Portal or webdynpro applications for this sort of thing (the user does not notice the difference) or later versions of such integration such as Fiori UIs or imbedded links within the Business Client.
I don't want to lean out the window too far, but the buggy phase of these new things is approaching an end and they are usable if you are on newer releases. Then you can pool the menu and use APIs for navigation and no more irritating S_TCODE checks.
Cheers,
Julius

Application error happening at least twice a day. Faulting applicaiton name: wmiprvse.exe

We're experiencing an issue with one of our Windows Server 2008R2 Standard Edition SP1 servers where an Application error occurs at least twice, and sometimes up to 5 or 6 times per day. The following error is what we see. Any help would be greatly
appreciated, and I'll be checking back frequently to check for updates and provide more info whenever needed. Thanks!
General:
Faulting application name: wmiprvse.exe, version: 6.1.7601.17514, time stamp: 0x4ce79d42
Faulting module name: ntdll.dll, version: 6.1.7601.17514, time stamp: 0x4ce7c8f9
Exception code: 0xc0000374
Fault offset: 0x00000000000c40f2
Faulting process id: 0x1bbc
Faulting application start time: 0x01cd5d65dbeb2e7c
Faulting application path: C:\Windows\system32\wbem\wmiprvse.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Details:
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2012-07-09T08:34:39.000000000Z
EventRecordID
6812
Channel
Application
Computer
{FQDN}
Security
EventData
wmiprvse.exe
6.1.7601.17514
4ce79d42
ntdll.dll
6.1.7601.17514
4ce7c8f9
c0000374
00000000000c40f2
1bbc
01cd5d65dbeb2e7c
C:\Windows\system32\wbem\wmiprvse.exe
C:\Windows\SYSTEM32\ntdll.dll
ebe1621c-c9a0-11e1-a1d4-5cf3fce8cef6
ETA: I also ran the wmidiag.exe tool from Microsoft. I saw it as a suggestion on another forum and ran it. I don't know if it has any bearing here, but this is the log in case it's helpful
show
06604 14:51:25 (0) ** WMIDiag v2.1 started on Tuesday, July 10, 2012 at 14:40.
06605 14:51:25 (0) **
06606 14:51:25 (0) ** Copyright (c) Microsoft Corporation. All rights reserved - July 2007.
06607 14:51:25 (0) **
06608 14:51:25 (0) ** This script is not supported under any Microsoft standard support program or service.
06609 14:51:25 (0) ** The script is provided AS IS without warranty of any kind. Microsoft further disclaims all
06610 14:51:25 (0) ** implied warranties including, without limitation, any implied warranties of merchantability
06611 14:51:25 (0) ** or of fitness for a particular purpose. The entire risk arising out of the use or performance
06612 14:51:25 (0) ** of the scripts and documentation remains with you. In no event shall Microsoft, its authors,
06613 14:51:25 (0) ** or anyone else involved in the creation, production, or delivery of the script be liable for
06614 14:51:25 (0) ** any damages whatsoever (including, without limitation, damages for loss of business profits,
06615 14:51:25 (0) ** business interruption, loss of business information, or other pecuniary loss) arising out of
06616 14:51:25 (0) ** the use of or inability to use the script or documentation, even if Microsoft has been advised
06617 14:51:25 (0) ** of the possibility of such damages.
06618 14:51:25 (0) **
06619 14:51:25 (0) **
06620 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06621 14:51:25 (0) ** ----------------------------------------------------- WMI REPORT: BEGIN ----------------------------------------------------------
06622 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06623 14:51:25 (0) **
06624 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06625 14:51:25 (0) ** Windows Server 2008 R2 - Service pack 1 - 64-bit (7601) - User {Username} on computer {ComputerName}.
06626 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06627 14:51:25 (0) ** Environment: ........................................................................................................ OK.
06628 14:51:25 (0) ** System drive: ....................................................................................................... C: (Disk #0 Partition #1).
06629 14:51:25 (0) ** Drive type: ......................................................................................................... SCSI (IBM ServeRAID M5015 SCSI Disk Device).
06630 14:51:25 (0) ** There are no missing WMI system files: .............................................................................. OK.
06631 14:51:25 (0) ** There are no missing WMI repository files: .......................................................................... OK.
06632 14:51:25 (0) ** WMI repository state: ............................................................................................... CONSISTENT.
06633 14:51:25 (0) ** AFTER running WMIDiag:
06634 14:51:25 (0) ** The WMI repository has a size of: ................................................................................... 90 MB.
06635 14:51:25 (0) ** - Disk free space on 'C:': .......................................................................................... 75295 MB.
06636 14:51:25 (0) ** - INDEX.BTR, 15818752 bytes, 7/10/2012 2:38:58 PM
06637 14:51:25 (0) ** - MAPPING1.MAP, 242388 bytes, 7/10/2012 2:33:33 PM
06638 14:51:25 (0) ** - MAPPING2.MAP, 242388 bytes, 7/10/2012 2:38:58 PM
06639 14:51:25 (0) ** - OBJECTS.DATA, 77570048 bytes, 7/10/2012 2:38:58 PM
06640 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06641 14:51:25 (2) !! WARNING: Windows Firewall: .......................................................................................... DISABLED.
06642 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06643 14:51:25 (0) ** DCOM Status: ........................................................................................................ OK.
06644 14:51:25 (0) ** WMI registry setup: ................................................................................................. OK.
06645 14:51:25 (0) ** INFO: WMI service has dependents: ................................................................................... 1 SERVICE(S)!
06646 14:51:25 (0) ** - Internet Connection Sharing (ICS) (SHAREDACCESS, StartMode='Disabled')
06647 14:51:25 (0) ** => If the WMI service is stopped, the listed service(s) will have to be stopped as well.
06648 14:51:25 (0) ** Note: If the service is marked with (*), it means that the service/application uses WMI but
06649 14:51:25 (0) ** there is no hard dependency on WMI. However, if the WMI service is stopped,
06650 14:51:25 (0) ** this can prevent the service/application to work as expected.
06651 14:51:25 (0) **
06652 14:51:25 (0) ** RPCSS service: ...................................................................................................... OK (Already started).
06653 14:51:25 (0) ** WINMGMT service: .................................................................................................... OK (Already started).
06654 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06655 14:51:25 (0) ** WMI service DCOM setup: ............................................................................................. OK.
06656 14:51:25 (0) ** WMI components DCOM registrations: .................................................................................. OK.
06657 14:51:25 (0) ** WMI ProgID registrations: ........................................................................................... OK.
06658 14:51:25 (0) ** WMI provider DCOM registrations: .................................................................................... OK.
06659 14:51:25 (0) ** WMI provider CIM registrations: ..................................................................................... OK.
06660 14:51:25 (0) ** WMI provider CLSIDs: ................................................................................................ OK.
06661 14:51:25 (2) !! WARNING: Some WMI providers EXE/DLL file(s) are missing: ............................................................ 18 WARNING(S)!
06662 14:51:25 (0) ** - ROOT/QLOGIC_CMPI, QLogic_NIC_Provider, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{28A5F598-F699-4A6B-B9F9-8C7EB9B7359F}:QLogic_NIC_Provider
06663 14:51:25 (0) ** - ROOT/QLOGIC_CMPI, QLogic_FCHBA_Provider, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{0AE588DD-D2E9-41EB-BCD1-8BF474187EC5}:QLogic_FCHBA_Provider
06664 14:51:25 (0) ** - ROOT/IBMSD, ADPT_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{B007445E-6AF0-4CBD-9009-809F071FCE69}:ADPT_Module
06665 14:51:25 (0) ** - ROOT/IBMSD, IBM_PA_Providers, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{2244E0FA-D37A-4F6E-82FB-92F1DB78716D}:IBM_PA_Providers
06666 14:51:25 (0) ** - ROOT/IBMSD, EndpointRegistrationProviderModule, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{BF833E81-33AA-40ED-B74A-329F006DB4F8}:EndpointRegistrationProviderModule
06667 14:51:25 (0) ** - ROOT/CIMV2, SBLIM_Data_Gatherer, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{0D03AF80-A160-44EF-9E8B-318201F41693}:SBLIM_Data_Gatherer
06668 14:51:25 (0) ** - ROOT/ADPT, ADPT_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{B007445E-6AF0-4CBD-9009-809F071FCE69}:ADPT_Module
06669 14:51:25 (0) ** - ROOT/PG_INTEROP, SBLIM_Data_Gatherer, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{0D03AF80-A160-44EF-9E8B-318201F41693}:SBLIM_Data_Gatherer
06670 14:51:25 (0) ** - ROOT/PG_INTEROP, LSIESG_SMIS13_HHR_ProviderModule, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{E21064DD-757A-4F2D-B798-81CDFF03B48C}:LSIESG_SMIS13_HHR_ProviderModule
06671 14:51:25 (0) ** - ROOT/PG_INTEROP, emulex_fc_provider_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{27734403-1E6C-4BC7-B97D-1FE9657B35EC}:emulex_fc_provider_Module
06672 14:51:25 (0) ** - ROOT/PG_INTEROP, emulex_ucna_provider_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{68D3C192-F517-41CC-B852-BA74A8D05A85}:emulex_ucna_provider_Module
06673 14:51:25 (0) ** - ROOT/IBMSE, emulex_fc_provider_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{27734403-1E6C-4BC7-B97D-1FE9657B35EC}:emulex_fc_provider_Module
06674 14:51:25 (0) ** - ROOT/IBMSE, IBM_PA_Providers, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{2244E0FA-D37A-4F6E-82FB-92F1DB78716D}:IBM_PA_Providers
06675 14:51:25 (0) ** - ROOT/IBMSE, emulex_ucna_provider_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{68D3C192-F517-41CC-B852-BA74A8D05A85}:emulex_ucna_provider_Module
06676 14:51:25 (0) ** - ROOT/LSI_MR_1_3_0, LSIESG_SMIS13_HHR_ProviderModule, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{E21064DD-757A-4F2D-B798-81CDFF03B48C}:LSIESG_SMIS13_HHR_ProviderModule
06677 14:51:25 (0) ** - ROOT/EMULEX, emulex_fc_provider_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{27734403-1E6C-4BC7-B97D-1FE9657B35EC}:emulex_fc_provider_Module
06678 14:51:25 (0) ** - ROOT/EMULEX, emulex_ucna_provider_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{68D3C192-F517-41CC-B852-BA74A8D05A85}:emulex_ucna_provider_Module
06679 14:51:25 (0) ** - ROOT/BROCADE, brcdprovider_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{48898EFD-0F9A-4657-B03D-FF400A7D2CDE}:brcdprovider_Module
06680 14:51:25 (0) ** => This will make any operations related to the WMI class supported by the provider(s) to fail.
06681 14:51:25 (0) ** This can be due to:
06682 14:51:25 (0) ** - the de-installation of the software.
06683 14:51:25 (0) ** - the deletion of some files.
06684 14:51:25 (0) ** => If the software has been de-installed intentionally, then this information must be
06685 14:51:25 (0) ** removed from the WMI repository. You can use the 'WMIC.EXE' command to remove
06686 14:51:25 (0) ** the provider registration data.
06687 14:51:25 (0) ** i.e. 'WMIC.EXE /NAMESPACE:\\ROOT\BROCADE path __Win32Provider Where Name='brcdprovider_Module' DELETE'
06688 14:51:25 (0) ** => If not, you must restore a copy of the missing provider EXE/DLL file(s) as indicated by the path.
06689 14:51:25 (0) ** You can retrieve the missing file from:
06690 14:51:25 (0) ** - A backup.
06691 14:51:25 (0) ** - The Windows CD.
06692 14:51:25 (0) ** - Another Windows installation using the same version and service pack level of the examined system.
06693 14:51:25 (0) ** - The original CD or software package installing this WMI provider.
06694 14:51:25 (0) **
06695 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06696 14:51:25 (0) ** INFO: User Account Control (UAC): ................................................................................... DISABLED.
06697 14:51:25 (0) ** INFO: Local Account Filtering: ...................................................................................... ENABLED.
06698 14:51:25 (0) ** => WMI tasks remotely accessing WMI information on this computer and requiring Administrative
06699 14:51:25 (0) ** privileges MUST use a DOMAIN account part of the Local Administrators group of this computer
06700 14:51:25 (0) ** to ensure that administrative privileges are granted. If a Local User account is used for remote
06701 14:51:25 (0) ** accesses, it will be reduced to a plain user (filtered token), even if it is part of the Local Administrators group.
06702 14:51:25 (0) **
06703 14:51:25 (0) ** Overall DCOM security status: ....................................................................................... OK.
06704 14:51:25 (0) ** Overall WMI security status: ........................................................................................ OK.
06705 14:51:25 (0) ** - Started at 'Root' --------------------------------------------------------------------------------------------------------------
06706 14:51:25 (0) ** INFO: WMI permanent SUBSCRIPTION(S): ................................................................................ 2.
06707 14:51:25 (0) ** - ROOT/SUBSCRIPTION, CommandLineEventConsumer.Name="BVTConsumer".
06708 14:51:25 (0) ** 'SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99'
06709 14:51:25 (0) ** - ROOT/SUBSCRIPTION, NTEventLogEventConsumer.Name="SCM Event Log Consumer".
06710 14:51:25 (0) ** 'select * from MSFT_SCMEventLogEvent'
06711 14:51:25 (0) **
06712 14:51:25 (0) ** WMI TIMER instruction(s): ........................................................................................... NONE.
06713 14:51:25 (0) ** INFO: WMI namespace(s) requiring PACKET PRIVACY: .................................................................... 3 NAMESPACE(S)!
06714 14:51:25 (0) ** - ROOT/CIMV2/SECURITY/MICROSOFTTPM.
06715 14:51:25 (0) ** - ROOT/CIMV2/TERMINALSERVICES.
06716 14:51:25 (0) ** - ROOT/SERVICEMODEL.
06717 14:51:25 (0) ** => When remotely connecting, the namespace(s) listed require(s) the WMI client to
06718 14:51:25 (0) ** use an encrypted connection by specifying the PACKET PRIVACY authentication level.
06719 14:51:25 (0) ** (RPC_C_AUTHN_LEVEL_PKT_PRIVACY or PktPrivacy flags)
06720 14:51:25 (0) ** i.e. 'WMIC.EXE /NODE:"{ComputerName}" /AUTHLEVEL:Pktprivacy /NAMESPACE:\\ROOT\SERVICEMODEL Class __SystemSecurity'
06721 14:51:25 (0) **
06722 14:51:25 (0) ** WMI MONIKER CONNECTIONS: ............................................................................................ OK.
06723 14:51:25 (0) ** WMI CONNECTIONS: .................................................................................................... OK.
06724 14:51:25 (1) !! ERROR: WMI GET operation errors reported: ........................................................................... 30 ERROR(S)!
06725 14:51:25 (0) ** - Root/CIMV2, MSFT_NetInvalidDriverDependency, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06726 14:51:25 (0) ** MOF Registration: ''
06727 14:51:25 (0) ** - Root/CIMV2, Win32_OsBaselineProvider, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06728 14:51:25 (0) ** MOF Registration: ''
06729 14:51:25 (0) ** - Root/CIMV2, Win32_OsBaseline, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06730 14:51:25 (0) ** MOF Registration: ''
06731 14:51:25 (0) ** - Root/CIMV2, Win32_DriverVXD, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06732 14:51:25 (0) ** MOF Registration: ''
06733 14:51:25 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_GenericIKEandAuthIP, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06734 14:51:25 (0) ** MOF Registration: ''
06735 14:51:25 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_GenericIKEandAuthIP, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06736 14:51:25 (0) ** MOF Registration: ''
06737 14:51:25 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecAuthIPv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06738 14:51:25 (0) ** MOF Registration: ''
06739 14:51:25 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecAuthIPv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06740 14:51:25 (0) ** MOF Registration: ''
06741 14:51:25 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecAuthIPv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06742 14:51:25 (0) ** MOF Registration: ''
06743 14:51:25 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecAuthIPv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06744 14:51:25 (0) ** MOF Registration: ''
06745 14:51:25 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecIKEv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06746 14:51:25 (0) ** MOF Registration: ''
06747 14:51:25 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecIKEv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06748 14:51:25 (0) ** MOF Registration: ''
06749 14:51:25 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecIKEv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06750 14:51:25 (0) ** MOF Registration: ''
06751 14:51:25 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecIKEv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06752 14:51:25 (0) ** MOF Registration: ''
06753 14:51:25 (0) ** - Root/CIMV2, Win32_PerfFormattedData_TermService_TerminalServices, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06754 14:51:25 (0) ** MOF Registration: ''
06755 14:51:25 (0) ** - Root/CIMV2, Win32_PerfRawData_TermService_TerminalServices, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06756 14:51:25 (0) ** MOF Registration: ''
06757 14:51:25 (0) ** - Root/WMI, ReserveDisjoinThread, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06758 14:51:25 (0) ** MOF Registration: ''
06759 14:51:25 (0) ** - Root/WMI, ReserveLateCount, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06760 14:51:25 (0) ** MOF Registration: ''
06761 14:51:25 (0) ** - Root/WMI, ReserveJoinThread, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06762 14:51:25 (0) ** MOF Registration: ''
06763 14:51:25 (0) ** - Root/WMI, ReserveDelete, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06764 14:51:25 (0) ** MOF Registration: ''
06765 14:51:25 (0) ** - Root/WMI, ReserveBandwidth, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06766 14:51:25 (0) ** MOF Registration: ''
06767 14:51:25 (0) ** - Root/WMI, ReserveCreate, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06768 14:51:25 (0) ** MOF Registration: ''
06769 14:51:25 (0) ** - Root/WMI, SystemConfig_PhyDisk, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06770 14:51:25 (0) ** MOF Registration: ''
06771 14:51:25 (0) ** - Root/WMI, SystemConfig_Video, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06772 14:51:25 (0) ** MOF Registration: ''
06773 14:51:25 (0) ** - Root/WMI, SystemConfig_IDEChannel, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06774 14:51:25 (0) ** MOF Registration: ''
06775 14:51:25 (0) ** - Root/WMI, SystemConfig_NIC, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06776 14:51:25 (0) ** MOF Registration: ''
06777 14:51:25 (0) ** - Root/WMI, SystemConfig_Network, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06778 14:51:25 (0) ** MOF Registration: ''
06779 14:51:25 (0) ** - Root/WMI, SystemConfig_CPU, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06780 14:51:25 (0) ** MOF Registration: ''
06781 14:51:25 (0) ** - Root/WMI, SystemConfig_LogDisk, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06782 14:51:25 (0) ** MOF Registration: ''
06783 14:51:25 (0) ** - Root/WMI, SystemConfig_Power, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06784 14:51:25 (0) ** MOF Registration: ''
06785 14:51:25 (0) ** => When a WMI performance class is missing (i.e. 'Win32_PerfRawData_TermService_TerminalServices'), it is generally due to
06786 14:51:25 (0) ** a lack of buffer refresh of the WMI class provider exposing the WMI performance counters.
06787 14:51:25 (0) ** You can refresh the WMI class provider buffer with the following command:
06788 14:51:25 (0) **
06789 14:51:25 (0) ** i.e. 'WINMGMT.EXE /SYNCPERF'
06790 14:51:25 (0) **
06791 14:51:25 (0) ** WMI MOF representations: ............................................................................................ OK.
06792 14:51:25 (0) ** WMI QUALIFIER access operations: .................................................................................... OK.
06793 14:51:25 (0) ** WMI ENUMERATION operations: ......................................................................................... OK.
06794 14:51:25 (2) !! WARNING: WMI EXECQUERY operation errors reported: ................................................................... 2 WARNING(S)!
06795 14:51:25 (0) ** - Root/CIMV2, 'Select * From Win32_PointingDevice WHERE Status = "OK"' did not return any instance while AT LEAST 1 instance is expected.
06796 14:51:25 (0) ** - Root/CIMV2, 'Select * From Win32_Keyboard' did not return any instance while AT LEAST 1 instance is expected.
06797 14:51:25 (0) **
06798 14:51:25 (2) !! WARNING: WMI GET VALUE operation errors reported: ................................................................... 5 WARNING(S)!
06799 14:51:25 (0) ** - Root, Instance: __EventConsumerProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
06800 14:51:25 (0) ** - Root, Instance: __EventProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
06801 14:51:25 (0) ** - Root, Instance: __EventSinkCacheControl=@, Property: ClearAfter='00000000000015.000000:000' (Expected default='00000000000230.000000:000').
06802 14:51:25 (0) ** - Root, Instance: __ObjectProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
06803 14:51:25 (0) ** - Root, Instance: __PropertyProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
06804 14:51:25 (0) **
06805 14:51:25 (0) ** WMI WRITE operations: ............................................................................................... NOT TESTED.
06806 14:51:25 (0) ** WMI PUT operations: ................................................................................................. NOT TESTED.
06807 14:51:25 (0) ** WMI DELETE operations: .............................................................................................. NOT TESTED.
06808 14:51:25 (0) ** WMI static instances retrieved: ..................................................................................... 2072.
06809 14:51:25 (0) ** WMI dynamic instances retrieved: .................................................................................... 0.
06810 14:51:25 (0) ** WMI instance request cancellations (to limit performance impact): ................................................... 1.
06811 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06812 14:51:25 (0) ** # of Event Log events BEFORE WMIDiag execution since the last 20 day(s):
06813 14:51:25 (0) ** DCOM: ............................................................................................................. 0.
06814 14:51:25 (0) ** WINMGMT: .......................................................................................................... 0.
06815 14:51:25 (0) ** WMIADAPTER: ....................................................................................................... 0.
06816 14:51:25 (0) **
06817 14:51:25 (0) ** # of additional Event Log events AFTER WMIDiag execution:
06818 14:51:25 (0) ** DCOM: ............................................................................................................. 0.
06819 14:51:25 (0) ** WINMGMT: .......................................................................................................... 0.
06820 14:51:25 (0) ** WMIADAPTER: ....................................................................................................... 0.
06821 14:51:25 (0) **
06822 14:51:25 (0) ** 30 error(s) 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found
06823 14:51:25 (0) ** => This error is typically a WMI error. This WMI error is due to:
06824 14:51:25 (0) ** - a missing WMI class definition or object.
06825 14:51:25 (0) ** (See any GET, ENUMERATION, EXECQUERY and GET VALUE operation failures).
06826 14:51:25 (0) ** You can correct the missing class definitions by:
06827 14:51:25 (0) ** - Manually recompiling the MOF file(s) with the 'MOFCOMP <FileName.MOF>' command.
06828 14:51:25 (0) ** Note: You can build a list of classes in relation with their WMI provider and MOF file with WMIDiag.
06829 14:51:25 (0) ** (This list can be built on a similar and working WMI Windows installation)
06830 14:51:25 (0) ** The following command line must be used:
06831 14:51:25 (0) ** i.e. 'WMIDiag CorrelateClassAndProvider'
06832 14:51:25 (0) ** Note: When a WMI performance class is missing, you can manually resynchronize performance counters
06833 14:51:25 (0) ** with WMI by starting the ADAP process.
06834 14:51:25 (0) ** - a WMI repository corruption.
06835 14:51:25 (0) ** In such a case, you must rerun WMIDiag with 'WriteInRepository' parameter
06836 14:51:25 (0) ** to validate the WMI repository operations.
06837 14:51:25 (0) ** Note: ENSURE you are an administrator with FULL access to WMI EVERY namespaces of the computer before
06838 14:51:25 (0) ** executing the WriteInRepository command. To write temporary data from the Root namespace, use:
06839 14:51:25 (0) ** i.e. 'WMIDiag WriteInRepository=Root'
06840 14:51:25 (0) ** - If the WriteInRepository command fails, while being an Administrator with ALL accesses to ALL namespaces
06841 14:51:25 (0) ** the WMI repository must be reconstructed.
06842 14:51:25 (0) ** Note: The WMI repository reconstruction requires to locate all MOF files needed to rebuild the repository,
06843 14:51:25 (0) ** otherwise some applications may fail after the reconstruction.
06844 14:51:25 (0) ** This can be achieved with the following command:
06845 14:51:25 (0) ** i.e. 'WMIDiag ShowMOFErrors'
06846 14:51:25 (0) ** Note: The repository reconstruction must be a LAST RESORT solution and ONLY after executing
06847 14:51:25 (0) ** ALL fixes previously mentioned.
06848 14:51:25 (2) !! WARNING: Static information stored by external applications in the repository will be LOST! (i.e. SMS Inventory)
06849 14:51:25 (0) **
06850 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06851 14:51:25 (0) ** Unexpected, wrong or missing registry key values: ................................................................... 1 KEY(S)!
06852 14:51:25 (0) ** INFO: Unexpected registry key value:
06853 14:51:25 (0) ** - Current: HKLM\SOFTWARE\Microsoft\WBEM\CIMOM\Logging (REG_SZ) -> 0
06854 14:51:25 (0) ** - Expected: HKLM\SOFTWARE\Microsoft\WBEM\CIMOM\Logging (REG_SZ) -> 1
06855 14:51:25 (0) ** From the command line, the registry configuration can be corrected with the following command:
06856 14:51:25 (0) ** i.e. 'REG.EXE Add "HKLM\SOFTWARE\Microsoft\WBEM\CIMOM" /v "Logging" /t "REG_SZ" /d "1" /f'
06857 14:51:25 (0) **
06858 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06859 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06860 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06861 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06862 14:51:25 (0) **
06863 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06864 14:51:25 (0) ** ------------------------------------------------------ WMI REPORT: END -----------------------------------------------------------
06865 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06866 14:51:25 (0) **
06867 14:51:25 (0) ** ERROR: WMIDiag detected issues that could prevent WMI to work properly!. Check 'C:\USERS\{Username}\APPDATA\LOCAL\TEMP\WMIDIAG-V2.1_2K8R2.SRV.SP1.64_{ComputerName}_2012.07.10_14.40.25.LOG' for details.
06868 14:51:25 (0) **
06869 14:51:25 (0) ** WMIDiag v2.1 ended on Tuesday, July 10, 2012 at 14:51 (W:103 E:51 S:1).

Following might help
A Wmiprvse.exe process crashes in Windows Server 2008 R2 when you use the WMI interface to query the hardware status on a computer that supports the IPMI standard
http://support.microsoft.com/kb/2280777
I do not represent the organisation I work for, all the opinions expressed here are my own.
This posting is provided "AS IS" with no warranties or guarantees and confers no rights.
I saw this in my googling. Listed as the cause on the hotfix page is the following: "This
problem occurs because the Ipmiprv.dll module leads the Wmiprvse.exe process to crash. This behavior depends on certain hardware sensor types when the sensor is enumerated." The
faulting module for that hotfix is ipmiprv.dll, and our faulting module is ntdll.dll. I'm thinking that this hotfix isn't applicable, but I'm open to hearing why I'm incorrect if I am.
Seth Johnson

SOAP Fault Exception [Actor null]

Hi All,
Im trying to call a webservice from portal This web service is in ECC. When I try to call it, it throws the following error:
#1.5 #00E0ED0BA5EF005C000000C500001E350004532D85C22E36#1217354889571#com.sap.portal.SOAPLogger#sap.com/irj#com.sap.portal.SOAPLogger#TESTUSER#9868##n/a##4b8f60d05d9911dda9db00e0ed0ba5ef#SAPEngine_Application_Thread[impl:3]_4##0#0#Warning#1#/System/Server#Java###Call failed
[EXCEPTION]
{0}#1#SOAP Fault Exception [Actor null] : CX_ST_MATCH_ELEMENT:XSLT exception.System expected element 'ItItem'
<Host>undefined</Host>
<Component>APPL</Component>
<ChainedException>
<Exception_Name>CX_SOAP_CORE</Exception_Name>
<Exception_Text>CX_ST_MATCH_ELEMENT:XSLT exception.System expected element 'ItItem'</Exception_Text>
</ChainedException>
<ChainedException>
<Exception_Name>CX_SXMLP</Exception_Name>
<Exception_Text>XSLT exception</Exception_Text>
</ChainedException>
<ChainedException>
<Exception_Name>CX_ST_MATCH_ELEMENT</Exception_Name>
<Exception_Text>System expected element 'ItItem': Main Program:/1BCDWB/WSSC9FCD3336732797F332| Program:/1BCDWB/WSSC9FCD3336732797F332| Line: 11| Valid:X</Exception_Text>
</ChainedException>
#1.5 #00E0ED0BA5EF005C000000C700001E350004532D85C23109#1217354889572#System.err#sap.com/irj#System.err#BHARDWS#9868##n/a##4b8f60d05d9911dda9db00e0ed0ba5ef#SAPEngine_Application_Thread[impl:3]_4##0#0#Error##Plain###SOAP Fault Exception [Actor null] : CX_ST_MATCH_ELEMENT:XSLT exception.System expected element 'ItItem'
<Host>undefined</Host>
<Component>APPL</Component>
<ChainedException>
<Exception_Name>CX_SOAP_CORE</Exception_Name>
<Exception_Text>CX_ST_MATCH_ELEMENT:XSLT exception.System expected element 'ItItem'</Exception_Text>
</ChainedException>
<ChainedException>
<Exception_Name>CX_SXMLP</Exception_Name>
<Exception_Text>XSLT exception</Exception_Text>
</ChainedException>
<ChainedException>
<Exception_Name>CX_ST_MATCH_ELEMENT</Exception_Name>
<Exception_Text>System expected element 'ItItem': Main Program:/1BCDWB/WSSC9FCD3336732797F332| Program:/1BCDWB/WSSC9FCD3336732797F332| Line: 11| Valid:X</Exception_Text>
</ChainedException>
#1.5 #00E0ED0BA5EF005C000000C800001E350004532D85C231DF#1217354889572#System.err#sap.com/irj#System.err#BHARDWS#9868##n/a##4b8f60d05d9911dda9db00e0ed0ba5ef#SAPEngine_Application_Thread[impl:3]_4##0#0#Error##Plain###We are in Exception and got the message778: SOAP Fault Error (n.a) : CX_ST_MATCH_ELEMENT:XSLT exception.System expected element 'ItItem'#
Has anyone come across this? Please help by giving directions on how to fix this.
Thanks
SB

Hi Alex,
Please ignore the above bapi call, it is too complex since it is a custom BAPI that Im trying to call. For now, I am trying to call a very simple BAPI --> BAPI_CUSTOMER_GETDETAIL just to make sure that communication is happening.
Here is the WSDL:
<?xml version="1.0" encoding="utf-8" ?>
- <wsdl:definitions targetNamespace="urn:sap-com:document:sap:rfc:functions" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="urn:sap-com:document:sap:rfc:functions">
- <wsdl:documentation>
<sidl:sidl xmlns:sidl="http://www.sap.com/2007/03/sidl" />
</wsdl:documentation>
- <wsdl:types>
- <xsd:schema attributeFormDefault="qualified" targetNamespace="urn:sap-com:document:sap:rfc:functions">
- <xsd:simpleType name="char1">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="1" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="char10">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="10" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="char130">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="130" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="char16">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="16" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="char2">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="2" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="char20">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="20" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="char220">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="220" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="char3">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="3" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="char30">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="30" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="char31">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="31" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="char32">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="32" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="char35">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="35" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="char4">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="4" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="char5">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="5" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="char50">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="cuky5">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="5" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="date">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="10" />
<xsd:pattern value="\d\d\d\d-\d\d-\d\d" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="lang">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="1" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="numeric3">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="3" />
<xsd:pattern value="\d*" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="numeric6">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="6" />
<xsd:pattern value="\d*" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:complexType name="BAPIRET2">
- <xsd:sequence>
<xsd:element name="TYPE" type="tns:char1" />
<xsd:element name="ID" type="tns:char20" />
<xsd:element name="NUMBER" type="tns:numeric3" />
<xsd:element name="MESSAGE" type="tns:char220" />
<xsd:element name="LOG_NO" type="tns:char20" />
<xsd:element name="LOG_MSG_NO" type="tns:numeric6" />
<xsd:element name="MESSAGE_V1" type="tns:char50" />
<xsd:element name="MESSAGE_V2" type="tns:char50" />
<xsd:element name="MESSAGE_V3" type="tns:char50" />
<xsd:element name="MESSAGE_V4" type="tns:char50" />
<xsd:element name="PARAMETER" type="tns:char32" />
<xsd:element name="ROW" type="xsd:int" />
<xsd:element name="FIELD" type="tns:char30" />
<xsd:element name="SYSTEM" type="tns:char10" />
</xsd:sequence>
</xsd:complexType>
- <xsd:complexType name="BAPIKNA101">
- <xsd:sequence>
<xsd:element name="FORM_OF_AD" type="tns:char30" />
<xsd:element name="FIRST_NAME" type="tns:char35" />
<xsd:element name="NAME" type="tns:char35" />
<xsd:element name="NAME_3" type="tns:char35" />
<xsd:element name="NAME_4" type="tns:char35" />
<xsd:element name="DATE_BIRTH" type="tns:date" />
<xsd:element name="STREET" type="tns:char35" />
<xsd:element name="POSTL_CODE" type="tns:char10" />
<xsd:element name="CITY" type="tns:char35" />
<xsd:element name="REGION" type="tns:char3" />
<xsd:element name="COUNTRY" type="tns:char3" />
<xsd:element name="COUNTRNISO" type="tns:char3" />
<xsd:element name="COUNTRAISO" type="tns:char3" />
<xsd:element name="INTERNET" type="tns:char130" />
<xsd:element name="FAX_NUMBER" type="tns:char31" />
<xsd:element name="TELEPHONE" type="tns:char16" />
<xsd:element name="TELEPHONE2" type="tns:char16" />
<xsd:element name="LANGU" type="tns:lang" />
<xsd:element name="LANGU_ISO" type="tns:char2" />
<xsd:element name="CURRENCY" type="tns:cuky5" />
<xsd:element name="CURRENCY_ISO" type="tns:char3" />
<xsd:element name="COUNTRYISO" type="tns:char2" />
<xsd:element name="ONLY_CHANGE_COMADDRESS" type="tns:char1" />
</xsd:sequence>
</xsd:complexType>
- <xsd:complexType name="BAPIRETURN">
- <xsd:sequence>
<xsd:element name="TYPE" type="tns:char1" />
<xsd:element name="CODE" type="tns:char5" />
<xsd:element name="MESSAGE" type="tns:char220" />
<xsd:element name="LOG_NO" type="tns:char20" />
<xsd:element name="LOG_MSG_NO" type="tns:numeric6" />
<xsd:element name="MESSAGE_V1" type="tns:char50" />
<xsd:element name="MESSAGE_V2" type="tns:char50" />
<xsd:element name="MESSAGE_V3" type="tns:char50" />
<xsd:element name="MESSAGE_V4" type="tns:char50" />
</xsd:sequence>
</xsd:complexType>
- <xsd:element name="BAPI_TRANSACTION_COMMIT">
- <xsd:complexType>
- <xsd:sequence>
<xsd:element name="WAIT" type="tns:char1" minOccurs="0" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
- <xsd:element name="BAPI_TRANSACTION_COMMITResponse">
- <xsd:complexType>
- <xsd:sequence>
<xsd:element name="RETURN" type="tns:BAPIRET2" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
- <xsd:element name="BAPI_CUSTOMER_GETDETAIL">
- <xsd:complexType>
- <xsd:sequence>
<xsd:element name="CUSTOMERNO" type="tns:char10" />
<xsd:element name="PI_DISTR_CHAN" type="tns:char2" minOccurs="0" />
<xsd:element name="PI_DIVISION" type="tns:char2" minOccurs="0" />
<xsd:element name="PI_PASS_BUFFER" type="tns:char1" minOccurs="0" />
<xsd:element name="PI_SALESORG" type="tns:char4" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
- <xsd:element name="BAPI_CUSTOMER_GETDETAILResponse">
- <xsd:complexType>
- <xsd:sequence>
<xsd:element name="PE_ADDRESS" type="tns:BAPIKNA101" />
<xsd:element name="RETURN" type="tns:BAPIRETURN" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
</wsdl:types>
- <wsdl:message name="BAPI_TRANSACTION_COMMIT">
<wsdl:part name="parameters" element="tns:BAPI_TRANSACTION_COMMIT" />
</wsdl:message>
- <wsdl:message name="BAPI_TRANSACTION_COMMITResponse">
<wsdl:part name="parameter" element="tns:BAPI_TRANSACTION_COMMITResponse" />
</wsdl:message>
- <wsdl:message name="BAPI_CUSTOMER_GETDETAIL">
<wsdl:part name="parameters" element="tns:BAPI_CUSTOMER_GETDETAIL" />
</wsdl:message>
- <wsdl:message name="BAPI_CUSTOMER_GETDETAILResponse">
<wsdl:part name="parameter" element="tns:BAPI_CUSTOMER_GETDETAILResponse" />
</wsdl:message>
- <wsdl:portType name="YCUST">
- <wsdl:operation name="BAPI_TRANSACTION_COMMIT">
<wsdl:input message="tns:BAPI_TRANSACTION_COMMIT" />
<wsdl:output message="tns:BAPI_TRANSACTION_COMMITResponse" />
</wsdl:operation>
- <wsdl:operation name="BAPI_CUSTOMER_GETDETAIL">
<wsdl:input message="tns:BAPI_CUSTOMER_GETDETAIL" />
<wsdl:output message="tns:BAPI_CUSTOMER_GETDETAILResponse" />
</wsdl:operation>
</wsdl:portType>
- <wsdl:binding name="YCUST" type="tns:YCUST">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
- <wsdl:operation name="BAPI_TRANSACTION_COMMIT">
<soap:operation soapAction="" style="document" />
- <wsdl:input>
<soap:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
- <wsdl:operation name="BAPI_CUSTOMER_GETDETAIL">
<soap:operation soapAction="" style="document" />
- <wsdl:input>
<soap:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
- <wsdl:service name="service">
- <wsdl:port name="YCUST" binding="tns:YCUST">
<soap:address location="http://myportal:8040/sap/bc/srt/rfc/sap/ycust/040/ycust/ycust" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
As you will see below in my portal component, Im populating the four fields that it requires:
public class WS_ECC_Service extends PageProcessorComponent {
public DynPage getPage(){
    return new WS_ECC_ServiceDynPage();
public static class WS_ECC_ServiceDynPage extends JSPDynPage{
     protected IPortalComponentRequest request;
           protected IPortalComponentResponse response;
           protected IPortalComponentSession session;
           protected IPortalComponentContext context;
           protected IPortalComponentProfile profile;
           protected String userId;
     //      protected IUser epUser;
           protected String sapSystem;
           protected String fileName;
           private DAO DAO = null;
     //      private FileUploadUtility FIU = null;
     //      private ReadExcelData RED = null;
           private final static int SUCCESS_STATE = 0;
           private final static int INITIAL_STATE = 1;
           private final static int ERROR_STATE = 2;
           private int state = INITIAL_STATE;
    public void doInitialization(){
      this.communicate();
      // fill your bean with data here...
     public void communicate()throws IllegalArgumentException{
                              try{
                                      IPortalRuntimeResources runtimeResources = PortalRuntime.getRuntimeResources();
                                   IYBAPI_Service myService = (IYBAPI_Service)runtimeResources.getService(IYBAPI_Service.KEY);
                                                     System.err.println("b4 passing object to service Anurag-"+IYBAPI_Service.KEY);
                                   com.ybapi.BAPI_CUSTOMER_GETDETAIL param = new com.ybapi.BAPI_CUSTOMER_GETDETAIL();
                                   com.ybapi.BAPI_CUSTOMER_GETDETAILResponse result1 = new com.ybapi.BAPI_CUSTOMER_GETDETAILResponse();
                                   com.ybapi.Char10 custno = new com.ybapi.Char10();
                                   custno.setValue("0000009702");
                                   param.setCUSTOMERNO(custno);
                                   com.ybapi.Char2 distr = new com.ybapi.Char2();
                                   distr.setValue("12");
                                   param.setPI_DISTR_CHAN(distr);
                                   param.setPI_DIVISION(distr);
                                   com.ybapi.Char1 buff = new com.ybapi.Char1();
                                   buff.setValue("w");
                                   param.setPI_PASS_BUFFER(buff);
                                   com.ybapi.Char4 sorg = new com.ybapi.Char4();
                                   sorg.setValue("0001");
                                   param.setPI_SALESORG(sorg);
                                   result1 = myService.BAPI_CUSTOMER_GETDETAIL(param);
                                System.err.println("message message dear message : - " + result1.getPE_ADDRESS().getNAME());
                              }catch (IllegalArgumentException ex){
                              System.err.println("Getting details2 " + ex.getMessage());
                              }catch (Exception e) {
                              e.printStackTrace();
                              System.err.println("We are in Exception and got the message778: " + e.getMessage());
                              }//end try catch
    public void doProcessAfterInput() throws PageException {
    public void doProcessBeforeOutput() throws PageException {
      this.setJspName("uploadutility.jsp");
and this is what it is throwing the error, exactly the same that I got in my above post which I asked you to ignore.
#1.5 #00E0ED0BA5EF006E0000015A00001E350004533EB66A08B6#1217428720322#com.sap.portal.SOAPLogger#sap.com/irj#com.sap.portal.SOAPLogger#BHARDWS#17255##n/a##2aaa48605e4511ddbbf300e0ed0ba5ef#SAPEngine_Application_Thread[impl:3]_2##0#0#Warning#1#/System/Server#Java###Call failed
[EXCEPTION]
{0}#1#SOAP Fault Exception [Actor null] : CX_ST_MATCH_ELEMENT:XSLT exception.System expected element 'CUSTOMERNO'
<Host>undefined</Host>
<Component>APPL</Component>
<ChainedException>
<Exception_Name>CX_SOAP_CORE</Exception_Name>
<Exception_Text>CX_ST_MATCH_ELEMENT:XSLT exception.System expected element 'CUSTOMERNO'</Exception_Text>
</ChainedException>
<ChainedException>
<Exception_Name>CX_SXMLP</Exception_Name>
<Exception_Text>XSLT exception</Exception_Text>
</ChainedException>
<ChainedException>
<Exception_Name>CX_ST_MATCH_ELEMENT</Exception_Name>
<Exception_Text>System expected element 'CUSTOMERNO': Main Program:/1BCDWB/WSSB675FB6DBC9770445BC| Program:/1BCDWB/WSSB675FB6DBC9770445BC| Line: 19| Valid:X</Exception_Text>
</ChainedException>
#1.5 #00E0ED0BA5EF006E0000015C00001E350004533EB66A09BD#1217428720322#System.err#sap.com/irj#System.err#BHARDWS#17255##n/a##2aaa48605e4511ddbbf300e0ed0ba5ef#SAPEngine_Application_Thread[impl:3]_2##0#0#Error##Plain###$$$$$$$$$$$$$exex-SOAP Fault Error (n.a) : CX_ST_MATCH_ELEMENT:XSLT exception.System expected element 'CUSTOMERNO'#
#1.5 #00E0ED0BA5EF006E0000015D00001E350004533EB66A0B44#1217428720323#System.err#sap.com/irj#System.err#BHARDWS#17255##n/a##2aaa48605e4511ddbbf300e0ed0ba5ef#SAPEngine_Application_Thread[impl:3]_2##0#0#Error##Plain###SOAP Fault Exception [Actor null] : CX_ST_MATCH_ELEMENT:XSLT exception.System expected element 'CUSTOMERNO'
<Host>undefined</Host>
<Component>APPL</Component>
<ChainedException>
<Exception_Name>CX_SOAP_CORE</Exception_Name>
<Exception_Text>CX_ST_MATCH_ELEMENT:XSLT exception.System expected element 'CUSTOMERNO'</Exception_Text>
</ChainedException>
<ChainedException>
<Exception_Name>CX_SXMLP</Exception_Name>
<Exception_Text>XSLT exception</Exception_Text>
</ChainedException>
<ChainedException>
<Exception_Name>CX_ST_MATCH_ELEMENT</Exception_Name>
<Exception_Text>System expected element 'CUSTOMERNO': Main Program:/1BCDWB/WSSB675FB6DBC9770445BC| Program:/1BCDWB/WSSB675FB6DBC9770445BC| Line: 19| Valid:X</Exception_Text>
</ChainedException>
#1.5 #00E0ED0BA5EF006E0000015E00001E350004533EB66A0B93#1217428720323#System.err#sap.com/irj#System.err#TESTUSER#17255##n/a##2aaa48605e4511ddbbf300e0ed0ba5ef#SAPEngine_Application_Thread[impl:3]_2##0#0#Error##Plain###We are in Exception and got the message778: SOAP Fault Error (n.a) : CX_ST_MATCH_ELEMENT:XSLT exception.System expected element 'CUSTOMERNO'#

MBAM web site configuration failure

I've set up MBAM 2.5 on my ConfigMgr 2012 server. Its integrated with Configuration Manager and created the two data bases on the same box with Windows Server 2012 R2 and SQL 2012 with reporting services. (I've configured a working OSD windows 7 task
sequence that uses MBAM to encrypt and store the recovery key.)
Now I'm trying to install the two web sites on a second windows 2012 server that is also acting as a deployment point with pxe server.
I can connect to my reporting server with a browser from the local server without being prompted for credentials. The MBAM reports are configured and visible. I'm using the same service account for SCCM reporting services and web service application
pool domain account. I've been working this for several days and am running out of ideas.
Next I'm going to set up a new 2012 test server to act as the MBAM web server only. Maybe that will simplify things and I don't have to worry about breaking my Distribution Point. Anyone have any ideas or suggestions?
Configurator information:
Description:
Invoking feature provider to validate the parameters of the administration web portal.
The configure web applications wizard keeps failing with the same single event log error message from hell:
Log Name:      Microsoft-Windows-MBAM-Server/Admin
Source:        Microsoft-Windows-MBAM-Setup
Date:          3/21/2015 10:54:09 AM
Event ID:      401
Task Category: MBAM Configurator
Level:         Error
Keywords:      MBAM Configurator
User:          domain\username
Computer:      MBAMwebServer.dc.state.fl.us
Description:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-MBAM-Setup" Guid="{C00827E6-3AE0-4F0A-8B45-08D05CD8424A}" />
    <EventID>401</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>4</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000080</Keywords>
    <TimeCreated SystemTime="2015-03-21T14:54:09.870728300Z" />
    <EventRecordID>89</EventRecordID>
    <Correlation />
    <Execution ProcessID="2476" ThreadID="2804" />
    <Channel>Microsoft-Windows-MBAM-Server/Admin</Channel>
    <Computer>WSCOC5039DP.dc.state.fl.us</Computer>
    <Security UserID="S-1-5-21-2100957022-532704775-253168949-48346" />
</System>
<EventData>
    <Data Name="Message">Exception thrown from feature provider.</Data>
    <Data Name="StackTrace">System.InvalidOperationException: Client found response content type of 'text/html; charset=utf-8', but expected 'text/xml'.
The request failed with the error message:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" >
<HTML>
<HEAD lang="en-US">
<META HTTP-EQUIV="X-UA-Compatible" CONTENT="IE=5">
<script language="JScript" type="text/Javascript" src="/Reports/js/ReportingServices.js"></script>
<TITLE>en-us - Report Manager</TITLE>
<link href="/Reports/styles/ReportingServices.css"type="text/css" rel="stylesheet">
<META Name="Report Server" CONTENT="http://SCCMserver:80/ReportServer">
</HEAD>
<BODY style="margin:0px;" class="msrs-normal" onload="InitContextMenu('contextMenuCollection','contextMenuCollection__selectedItemIdHiddenField',new Array('contextMenuCollection_ReportContextMenuIdDiv'),'S_searchTextBoxID','Search');ControlConditionalEnable10(true);"><form
name="ui_form" method="POST" action="Folder.aspx?ItemPath=%2fMicrosoft+BitLocker+Administration+and+Monitoring%2fen-us&ViewMode=List%2fReportService2005.asmx" id="ui_form" enctype="multipart/form-data">
<div>
<input type="hidden" name="__EVENTTARGET" id="__EVENTTARGET" value="" />
<input type="hidden" name="__EVENTARGUMENT" id="__EVENTARGUMENT" value="" />
<input type="hidden" name="__VIEWSTATE" id="__VIEWSTATE" value="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"
/>
</div>
<script type="text/javascript">
//<![CDATA[
var theForm = document.forms['ui_form'];
if (!theForm) {
    theForm = document.ui_form;
function __doPostBack(eventTarget, eventArgument) {
    if (!theForm.onsubmit || (theForm.onsubmit() != false)) {
        theForm.__EVENTTARGET.value = eventTarget;
        theForm.__EVENTARGUMENT.value = eventArgument;
        theForm.submit();
//]]>
</script>
<div>
<input type="hidden" name="__VIEWSTATEGENERATOR" id="__VIEWSTATEGENERATOR" value="A08DB298" />
</div><span><noscript><table width="100%" class="msrs-normal">
<tr>
  <td valign="top" height="30" colspan="4" class="msrs-validationerror"><img src="/Reports/images/blank.gif" height="1" width="24" border="0" /><img
src="/Reports/images/line_err1.gif" height="16" width="16" alt="Error" /><img src="/Reports/images/blank.gif" height="1" width="12" border="0" />This page
might not function correctly because either your browser does not support scripts or active scripting is disabled.</td>
</tr>
</table>
</noscript><table width="100%" class="msrs-normal" cellpadding="0" cellspacing="0" height="100%">
<tr>
  <td valign="top"><div>
   <table class="msrs-topBreadcrumb" cellpadding="0" cellspacing="0" border="0" width="100%">
    <tr>
     <td><span><div>
      <a href="/Reports/Pages/Folder.aspx?ViewMode=List%2fReportService2005.asmx">Home</a> > <a href="/Reports/Pages/Folder.aspx?ItemPath=%2fMicrosoft+BitLocker+Administration+and+Monitoring&ViewMode=List%2fReportService2005.asmx">Microsoft
BitLocker Administration and Monitoring</a>
     </div></span></td>
     <td align="right"><span><a href="/Reports/Pages/Folder.aspx?ViewMode=List%2fReportService2005.asmx">Home</a> | <a href="/Reports/Pages/Subscriptions.aspx?ViewMode=List%2fReportService2005.asmx">My Subscriptions</a> |
<a href="/Reports/Pages/Settings.aspx?ViewMode=List%2fReportService2005.asmx">Site Settings</a> | <a href="http://go.microsoft.com/fwlink/?LinkID=223508"
target="MicrosoftReportingServicesHelp">Help</a></span></td>
    </tr>
   </table>
   <table class="msrs-header" cellpadding="0" cellspacing="0" border="0" width="100%">
    <tr>
     <td class="msrs-logo" width="36"><img src="/Reports/images/folder_32.gif" alt="Folder" style="height:32px;width:32px;border-width:0px;" /></td>
     <td><P class="msrs-site_title">SQL Server Reporting Services</P><P class="msrs-page_title">en-us</P></td>
     <td class="msrs-searchContainer" align="right" valign="bottom"><table class="msrs-searchBar" cellpadding="0" cellspacing="0" onfocus="document.getElementById('S_searchButtonID').disabled
= false" onblur="document.getElementById('S_searchButtonID').disabled = true" onmouseover="document.getElementById('S_searchButtonID').disabled = false" onmouseout="document.getElementById('S_searchButtonID').disabled = true">
      <tr>
       <td style="padding:0px;"><input name="ctl18$ctl24$S_searchTextBoxID" type="text" value="Search" id="S_searchTextBoxID" class="msrs-searchDefaultFont"
onclick="SearchBarClicked('S_searchTextBoxID', 'Search', 'msrs-searchBarNoBorder' );" onblur="SearchBarBlured('S_searchTextBoxID','Search', 'msrs-searchDefaultFont');" onkeypress="
if ((event.which && event.which == 13) || (event.keyCode && event.keyCode == 13))
    var searchButton = document.getElementById('S_searchButtonID');
    searchButton.disabled = false;
    searchButton.click();
    event.cancelBubble = true;
    return false;
else
    return true;
" /></td>
       <td style="padding:0px;"><input type="image" name="ctl18$ctl24$S_searchButtonID" id="S_searchButtonID" class="msrs-searchButton" disabled="true"
src="/Reports/images/search_21x.gif" alt="Go" style="border-width:0px;" /></td>
      </tr>
     </table></td>
    </tr>
   </table>
  </div></td>
</tr>
<tr height="100%">
  <td valign="top"><table width="100%" class="msrs-contentFrame" cellpadding="0" cellspacing="0" height="100%">
   <tr>
    <td valign="top" height="100%"><span><table width="100%" class="msrs-normal" cellpadding="0" cellspacing="0" height="100%">
     <tr>
      <td valign="top"><span style="display:inline-block;height:100%;"><script language="Javascript" type="text/Javascript">function ControlConditionalEnable10(topLevelEnable)
{EnableMultiButtons('ui_');}</script><span><table width="100%" class="msrs-normal" cellpadding="0" cellspacing="0">
       <tr class="msrs-toolbar_top" height="6">
        <td valign="top"></td>
       </tr>
       <tr class="msrs-tool">
        <td valign="top"><table width="100%" cellpadding="0" cellspacing="0">
         <tr>
          <td valign="top" width="5"><img src="/Reports/images/blank.gif" height="0" width="5" /></td>
          <td valign="middle"><a id="ui_btnNewFold" class="msrs-buttonHeaderButton msrs-buttonHeaderText" title="New Folder" href="/Reports/Pages/FolderProperties.aspx?CreateNew=True&ItemPath=%2fMicrosoft+BitLocker+Administration+and+Monitoring%2fen-us%2fNew+Folder&RedirectUrl=http%3a%2f%2fwscoc3761cm2%2fReports%2fPages%2fFolder.aspx%3fItemPath%3d%252fMicrosoft%2bBitLocker%2bAdministration%2band%2bMonitoring%252fen-us%26ViewMode%3dList%2fReportService2005.asmx"
onmouseover="this.className='msrs-buttonHeaderButtonHover msrs-buttonHeaderText';" onmouseout="this.className='msrs-buttonHeaderButton msrs-buttonHeaderText';" style="display:inline-block;white-space:nowrap;padding-padding-bottom:2px;padding-padding-right:5px;text-decoration:none;"><img
align="absmiddle" title="New Folder" src="/Reports/images/16newfolder.gif" alt="New Folder" style="border-style:None;height:16px;width:16px;border-width:0px;margin-right:3px;" />New Folder</a></td>
          <td valign="top" class="msrs-toolBarSpacerImage"><img src="/Reports/images/divider.gif" style="height:16px;width:16px;border-width:0px;"
/></td>
          <td valign="middle"><a id="ui_btnNewDataSource" class="msrs-buttonHeaderButton msrs-buttonHeaderText" title="New Data Source" href="/Reports/Pages/DataSource.aspx?CreateNew=True&ItemsParentPath=%2fMicrosoft+BitLocker+Administration+and+Monitoring%2fen-us&RedirectUrl=http%3a%2f%2fwscoc3761cm2%2fReports%2fPages%2fFolder.aspx%3fItemPath%3d%252fMicrosoft%2bBitLocker%2bAdministration%2band%2bMonitoring%252fen-us%26ViewMode%3dList%2fReportService2005.asmx"
onmouseover="this.className='msrs-buttonHeaderButtonHover msrs-buttonHeaderText';" onmouseout="this.className='msrs-buttonHeaderButton msrs-buttonHeaderText';" style="display:inline-block;white-space:nowrap;padding-padding-bottom:2px;padding-padding-right:5px;text-decoration:none;"><img
align="absmiddle" title="New Data Source" src="/Reports/images/16newdatasource.gif" alt="New Data Source" style="border-style:None;height:16px;width:16px;border-width:0px;margin-right:3px;" />New Data
Source</a></td>
          <td valign="top" class="msrs-toolBarSpacerImage"><img src="/Reports/images/divider.gif" style="height:16px;width:16px;border-width:0px;"
/></td>
          <td valign="middle"><a id="ui_btnNewReport" class="msrs-buttonHeaderButton msrs-buttonHeaderText" title="Report Builder" href="http://SCCMserver/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application"
onmouseover="this.className='msrs-buttonHeaderButtonHover msrs-buttonHeaderText';" onmouseout="this.className='msrs-buttonHeaderButton msrs-buttonHeaderText';" style="display:inline-block;white-space:nowrap;padding-padding-bottom:2px;padding-padding-right:5px;text-decoration:none;"><img
align="absmiddle" title="Report Builder" src="/Reports/images/new_RB_report.gif" alt="Report Builder" style="border-style:None;height:16px;width:16px;border-width:0px;margin-right:3px;" />Report Builder</a></td>
          <td valign="top" class="msrs-toolBarSpacerImage"><img src="/Reports/images/divider.gif" style="height:16px;width:16px;border-width:0px;"
/></td>
          <td valign="middle"><a id="ui_btnSettings" class="msrs-buttonHeaderButton msrs-buttonHeaderText" title="Folder Settings" href="/Reports/Pages/Folder.aspx?ItemPath=%2fMicrosoft+BitLocker+Administration+and+Monitoring%2fen-us&SelectedTabId=PropertiesTab"
onmouseover="this.className='msrs-buttonHeaderButtonHover msrs-buttonHeaderText';" onmouseout="this.className='msrs-buttonHeaderButton msrs-buttonHeaderText';" style="display:inline-block;white-space:nowrap;padding-padding-bottom:2px;padding-padding-right:5px;text-decoration:none;"><img
align="absmiddle" title="Folder Settings" src="/Reports/images/edit_folder.gif" alt="Folder Settings" style="border-style:None;height:16px;width:16px;border-width:0px;margin-right:3px;" />Folder Settings</a></td>
          <td valign="top" class="msrs-toolBarSpacerImage"><img src="/Reports/images/divider.gif" style="height:16px;width:16px;border-width:0px;"
/></td>
          <td valign="middle"><a id="ui_btnUpload" class="msrs-buttonHeaderButton msrs-buttonHeaderText" title="Upload File" href="/Reports/Pages/Import.aspx?ItemPath=%2fMicrosoft+BitLocker+Administration+and+Monitoring%2fen-us&&RedirectUrl=http%3a%2f%2fwscoc3761cm2%2fReports%2fPages%2fFolder.aspx%3fItemPath%3d%252fMicrosoft%2bBitLocker%2bAdministration%2band%2bMonitoring%252fen-us%26ViewMode%3dList%2fReportService2005.asmx"
onmouseover="this.className='msrs-buttonHeaderButtonHover msrs-buttonHeaderText';" onmouseout="this.className='msrs-buttonHeaderButton msrs-buttonHeaderText';" style="display:inline-block;white-space:nowrap;padding-padding-bottom:2px;padding-padding-right:5px;text-decoration:none;"><img
align="absmiddle" title="Upload File" src="/Reports/images/UploadFile.gif" alt="Upload File" style="border-style:None;height:16px;width:16px;border-width:0px;margin-right:3px;" />Upload File</a></td>
          <td valign="top" width="3"><img src="/Reports/images/blank.gif" height="0" width="3" /></td>
          <td width="100%"></td>
          <td valign="middle"><a id="ui_btnSwitchView" class="msrs-buttonHeaderButton msrs-buttonHeaderText" title="Details View" href="http://SCCMserver:80/Reports/Pages/Folder.aspx?ItemPath=%2fMicrosoft+BitLocker+Administration+and+Monitoring%2fen-us&ViewMode=Detail"
onmouseover="this.className='msrs-buttonHeaderButtonHover msrs-buttonHeaderText';" onmouseout="this.className='msrs-buttonHeaderButton msrs-buttonHeaderText';" style="display:inline-block;white-space:nowrap;padding-top:2px;padding-bottom:2px;padding-left:5px;padding-right:5px;text-decoration:none;"><img
align="absmiddle" title="Details View" src="/Reports/images/view_detail.gif" alt="Details View" style="border-style:None;height:16px;width:16px;border-width:0px;margin-right:3px;" />Details View</a></td>
          <td valign="top" width="5"><img src="/Reports/images/blank.gif" height="0" width="5" /></td>
          <td valign="top"> </td>
         </tr>
        </table>
        </td>
       </tr>
       <tr class="msrs-toolbar_bottom" height="6">
        <td valign="top"></td>
       </tr>
      </table>
      </span><table width="100%" class="msrs-normal" cellpadding="0" cellspacing="0" TITLE="Items in en-us">
       <tr>
        <td valign="top" width="10"><img src="/Reports/images/blank.gif" height="0" width="10" /></td>
        <td valign="top" width="100%"><table width="100%" class="msrs-normal" cellpadding="0" cellspacing="0">
         <tr>
          <td valign="top" height="5px"></td>
         </tr>
         <tr>
          <td valign="top"><Div class="msrs-tileView"><table id="ui_a0" class="msrs-UnSelectedItem" onclick="Clicked(event,'contextMenuCollection_ReportContextMenuIdDiv')"
onmouseover="ChangeReportItemStyleOnMouseOver('ui_a0', 'msrs-SelectedItem', 'msrs-UnSelectedItem')" onmouseout="ChangeReportItemStyleOnMouseOut('ui_a0', 'msrs-UnSelectedItem')" onfocus="ChangeReportItemStyleOnMouseOver('ui_a0', 'msrs-SelectedItem',
'msrs-UnSelectedItem')" onblur="ChangeReportItemStyleOnMouseOut('ui_a0', 'msrs-UnSelectedItem')" onkeydown="OpenMenuKeyPress(event,'contextMenuCollection_ReportContextMenuIdDiv')" value="/Microsoft BitLocker Administration and
Monitoring/en-us/Computer Compliance Report">
           <tr>
            <td><a href="/Reports/Pages/Report.aspx?ItemPath=%2fMicrosoft+BitLocker+Administration+and+Monitoring%2fen-us%2fComputer+Compliance+Report"
onmouseover="OnLink()" onmouseout="OffLink()" TabIndex="-1"><img src="/Reports/images/RB_document_32.gif" alt="Report" style="height:32px;width:32px;border-width:0px;visibility:visible;"
/></a></td>
            <td><a href="/Reports/Pages/Report.aspx?ItemPath=%2fMicrosoft+BitLocker+Administration+and+Monitoring%2fen-us%2fComputer+Compliance+Report"
onmouseover="OnLink()" onmouseout="OffLink()" onfocus="ChangeReportItemStyleOnMouseOver('ui_a0', 'msrs-SelectedItem', 'msrs-UnSelectedItem')" onblur="ChangeReportItemStyleOnMouseOut('ui_a0', 'msrs-UnSelectedItem')" class="msrs-itemName"
title="Computer Compliance Report">Computer Compliance Report</a></td>
            <td width="20px;"><img src="/Reports/images/Menu1.gif" alt="Open Menu" /></td>
           </tr>
          </table>
          </Div><Div class="msrs-tileView"><table id="ui_a1" class="msrs-UnSelectedItem" onclick="Clicked(event,'contextMenuCollection_ReportContextMenuIdDiv')"
onmouseover="ChangeReportItemStyleOnMouseOver('ui_a1', 'msrs-SelectedItem', 'msrs-UnSelectedItem')" onmouseout="ChangeReportItemStyleOnMouseOut('ui_a1', 'msrs-UnSelectedItem')" onfocus="ChangeReportItemStyleOnMouseOver('ui_a1', 'msrs-SelectedItem',
'msrs-UnSelectedItem')" onblur="ChangeReportItemStyleOnMouseOut('ui_a1', 'msrs-UnSelectedItem')" onkeydown="OpenMenuKeyPress(event,'contextMenuCollection_ReportContextMenuIdDiv')" value="/Microsoft BitLocker Administration and
Monitoring/en-us/Enterprise Compliance Report">
           <tr>
            <td><a href="/Reports/Pages/Report.aspx?ItemPath=%2fMicrosoft+BitLocker+Administration+and+Monitoring%2fen-us%2fEnterprise+Compliance+Report"
onmouseover="OnLink()" onmouseout="OffLink()" TabIndex="-1"><img src="/Reports/images/RB_document_32.gif" alt="Report" style="height:32px;width:32px;border-width:0px;visibility:visible;"
/></a></td>
            <td><a href="/Reports/Pages/Report.aspx?ItemPath=%2fMicrosoft+BitLocker+Administration+and+Monitoring%2fen-us%2fEnterprise+Compliance+Report"
onmouseover="OnLink()" onmouseout="OffLink()" onfocus="ChangeReportItemStyleOnMouseOver('ui_a1', 'msrs-SelectedItem', 'msrs-UnSelectedItem')" onblur="ChangeReportItemStyleOnMouseOut('ui_a1', 'msrs-UnSelectedItem')" class="msrs-itemName"
title="Enterprise Compliance Report">Enterprise Compliance Report</a></td>
            <td width="20px;"><img src="/Reports/images/Menu1.gif" alt="Open Menu" /></td>
           </tr>
          </table>
          </Div><Div class="msrs-tileView"><table id="ui_a2" class="msrs-UnSelectedItem" onclick="Clicked(event,'contextMenuCollection_ReportContextMenuIdDiv')"
onmouseover="ChangeReportItemStyleOnMouseOver('ui_a2', 'msrs-SelectedItem', 'msrs-UnSelectedItem')" onmouseout="ChangeReportItemStyleOnMouseOut('ui_a2', 'msrs-UnSelectedItem')" onfocus="ChangeReportItemStyleOnMouseOver('ui_a2', 'msrs-SelectedItem',
'msrs-UnSelectedItem')" onblur="ChangeReportItemStyleOnMouseOut('ui_a2', 'msrs-UnSelectedItem')" onkeydown="OpenMenuKeyPress(event,'contextMenuCollection_ReportContextMenuIdDiv')" value="/Microsoft BitLocker Administration and
Monitoring/en-us/Recovery Audit Report">
           <tr>
            <td><a href="/Reports/Pages/Report.aspx?ItemPath=%2fMicrosoft+BitLocker+Administration+and+Monitoring%2fen-us%2fRecovery+Audit+Report"
onmouseover="OnLink()" onmouseout="OffLink()" TabIndex="-1"><img src="/Reports/images/RB_document_32.gif" alt="Report" style="height:32px;width:32px;border-width:0px;visibility:visible;"
/></a></td>
            <td><a href="/Reports/Pages/Report.aspx?ItemPath=%2fMicrosoft+BitLocker+Administration+and+Monitoring%2fen-us%2fRecovery+Audit+Report"
onmouseover="OnLink()" onmouseout="OffLink()" onfocus="ChangeReportItemStyleOnMouseOver('ui_a2', 'msrs-SelectedItem', 'msrs-UnSelectedItem')" onblur="ChangeReportItemStyleOnMouseOut('ui_a2', 'msrs-UnSelectedItem')" class="msrs-itemName"
title="Recovery Audit Report">Recovery Audit Report</a></td>
            <td width="20px;"><img src="/Reports/images/Menu1.gif" alt="Open Menu" /></td>
           </tr>
          </table>
          </Div><Div class="msrs-tileView"><table id="ui_a3" class="msrs-UnSelectedItem" onclick="Clicked(event,'contextMenuCollection_ReportContextMenuIdDiv')"
onmouseover="ChangeReportItemStyleOnMouseOver('ui_a3', 'msrs-SelectedItem', 'msrs-UnSelectedItem')" onmouseout="ChangeReportItemStyleOnMouseOut('ui_a3', 'msrs-UnSelectedItem')" onfocus="ChangeReportItemStyleOnMouseOver('ui_a3', 'msrs-SelectedItem',
'msrs-UnSelectedItem')" onblur="ChangeReportItemStyleOnMouseOut('ui_a3', 'msrs-UnSelectedItem')" onkeydown="OpenMenuKeyPress(event,'contextMenuCollection_ReportContextMenuIdDiv')" value="/Microsoft BitLocker Administration and
Monitoring/en-us/Volume Report">
           <tr>
            <td><a href="/Reports/Pages/Report.aspx?ItemPath=%2fMicrosoft+BitLocker+Administration+and+Monitoring%2fen-us%2fVolume+Report" onmouseover="OnLink()"
onmouseout="OffLink()" TabIndex="-1"><img src="/Reports/images/RB_document_32.gif" alt="Report" style="height:32px;width:32px;border-width:0px;visibility:visible;" /></a></td>
            <td><a href="/Reports/Pages/Report.aspx?ItemPath=%2fMicrosoft+BitLocker+Administration+and+Monitoring%2fen-us%2fVolume+Report" onmouseover="OnLink()"
onmouseout="OffLink()" onfocus="ChangeReportItemStyleOnMouseOver('ui_a3', 'msrs-SelectedItem', 'msrs-UnSelectedItem')" onblur="ChangeReportItemStyleOnMouseOut('ui_a3', 'msrs-UnSelectedItem')" class="msrs-itemName" title="Volume
Report">Volume Report</a></td>
            <td width="20px;"><img src="/Reports/images/Menu1.gif" alt="Open Menu" /></td>
           </tr>
          </table>
          </Div></td>
         </tr>
        </table>
        </td>
        <td valign="top" width="10"><img src="/Reports/images/blank.gif" height="0" width="10" /></td>
       </tr>
      </table>
      <script language="Javascript" type="text/Javascript">var multiButtonList = [];</script></span></td>
     </tr>
    </table>
    </span></td>
   </tr>
  </table>
  </td>
</tr>
</table>
</span><div id="contextMenuCollection" class="msrs-MenuUIPopupBody" style="display:none;;">
<input name="contextMenuCollection$_selectedItemIdHiddenField" type="hidden" id="contextMenuCollection__selectedItemIdHiddenField" /><div id="contextMenuCollection_ReportContextMenuIdDiv" onkeydown="NavigateMenuKeyPress(event)">
  <table cellpadding="0" cellspacing="0" class="msrs-MenuUI">
   <tr>
    <td><img class="msrs-MenuUIMinWidth" src="/Reports/images/blank.gif" style="border-width:0px;" /></td>
   </tr>
   <tr>
    <td id="ui_rcmmove" class="msrs-MenuUIItemTableCell" group="0" underline="OGUL:0ReportContextMenuIdDiv" onmouseover="FocusContextMenuItem('ui_rcmmove','msrs-MenuUIItemTableHover','msrs-MenuUIItemTableCell');"
onmouseout="SwapStyle('ui_rcmmove','msrs-MenuUIItemTableCell');" onblur="SwapStyle('ui_rcmmove','msrs-MenuUIItemTableCell');"><a onclick="HideMenu();" href="javascript:__doPostBack('contextMenuCollection$ReportContextMenuIdDiv$ctl05','')"><Span
class="msrs-menuItemImageContainer"></Span><Span class="msrs-menuItemLabelContainer">Move</Span></a></td>
   </tr>
   <tr>
    <td id="ui_rcmdelete" class="msrs-MenuUIItemTableCell" group="0" onmouseover="FocusContextMenuItem('ui_rcmdelete','msrs-MenuUIItemTableHover','msrs-MenuUIItemTableCell');" onmouseout="SwapStyle('ui_rcmdelete','msrs-MenuUIItemTableCell');"
onblur="SwapStyle('ui_rcmdelete','msrs-MenuUIItemTableCell');"><a onclick="HideMenu();return ShouldDelete('Are you sure you want to delete \u0022{0}\u0022?');" href="javascript:__doPostBack('contextMenuCollection$ReportContextMenuIdDiv$ctl09','')"><Span
class="msrs-menuItemImageContainer"><img alt="" src="/Reports/images/delitem.gif" style="border-width:0px;" /></Span><Span class="msrs-menuItemLabelContainer">Delete</Span></a></td>
   </tr>
   <tr id="OGUL:0ReportContextMenuIdDiv">
    <td><Div class="msrs-MenuUISeparator">#</Div></td>
   </tr>
   <tr>
    <td id="ui_rcmmansub" class="msrs-MenuUIItemTableCell" group="1" underline="OGUL:1ReportContextMenuIdDiv" onmouseover="FocusContextMenuItem('ui_rcmmansub','msrs-MenuUIItemTableHover','msrs-MenuUIItemTableCell');"
onmouseout="SwapStyle('ui_rcmmansub','msrs-MenuUIItemTableCell');" onblur="SwapStyle('ui_rcmmansub','msrs-MenuUIItemTableCell');"><a onclick="HideMenu();" href="javascript:__doPostBack('contextMenuCollection$ReportContextMenuIdDiv$ctl16','')"><Span
class="msrs-menuItemImageContainer"><img alt="" src="/Reports/images/subscription_report.gif" style="border-width:0px;" /></Span><Span class="msrs-menuItemLabelContainer">Subscribe...</Span></a></td>
   </tr>
   <tr>
    <td id="ui_rcmclr" class="msrs-MenuUIItemTableCell" group="1" onmouseover="FocusContextMenuItem('ui_rcmclr','msrs-MenuUIItemTableHover','msrs-MenuUIItemTableCell');" onmouseout="SwapStyle('ui_rcmclr','msrs-MenuUIItemTableCell');"
onblur="SwapStyle('ui_rcmclr','msrs-MenuUIItemTableCell');"><a onclick="HideMenu();" href="javascript:__doPostBack('contextMenuCollection$ReportContextMenuIdDiv$ctl21','')"><Span class="msrs-menuItemImageContainer"><img
alt="" src="/Reports/images/16linked.gif" style="border-width:0px;" /></Span><Span class="msrs-menuItemLabelContainer">Create Linked Report...</Span></a></td>
   </tr>
   <tr>
    <td id="ui_rcmviewrh" class="msrs-MenuUIItemTableCell" group="1" onmouseover="FocusContextMenuItem('ui_rcmviewrh','msrs-MenuUIItemTableHover','msrs-MenuUIItemTableCell');" onmouseout="SwapStyle('ui_rcmviewrh','msrs-MenuUIItemTableCell');"
onblur="SwapStyle('ui_rcmviewrh','msrs-MenuUIItemTableCell');"><a onclick="HideMenu();" href="javascript:__doPostBack('contextMenuCollection$ReportContextMenuIdDiv$ctl26','')"><Span class="msrs-menuItemImageContainer"></Span><Span
class="msrs-menuItemLabelContainer">View Report History</Span></a></td>
   </tr>
   <tr id="OGUL:1ReportContextMenuIdDiv">
    <td><Div class="msrs-MenuUISeparator">#</Div></td>
   </tr>
   <tr>
    <td id="ui_rcmsec" class="msrs-MenuUIItemTableCell" group="2" underline="OGUL:2ReportContextMenuIdDiv" onmouseover="FocusContextMenuItem('ui_rcmsec','msrs-MenuUIItemTableHover','msrs-MenuUIItemTableCell');"
onmouseout="SwapStyle('ui_rcmsec','msrs-MenuUIItemTableCell');" onblur="SwapStyle('ui_rcmsec','msrs-MenuUIItemTableCell');"><a onclick="HideMenu();" href="javascript:__doPostBack('contextMenuCollection$ReportContextMenuIdDiv$ctl32','')"><Span
class="msrs-menuItemImageContainer"><img alt="" src="/Reports/images/security16.gif" style="border-width:0px;" /></Span><Span class="msrs-menuItemLabelContainer">Security</Span></a></td>
   </tr>
   <tr>
    <td id="ui_rcmedit" class="msrs-MenuUIItemTableCell" group="2" onmouseover="FocusContextMenuItem('ui_rcmedit','msrs-MenuUIItemTableHover','msrs-MenuUIItemTableCell');" onmouseout="SwapStyle('ui_rcmedit','msrs-MenuUIItemTableCell');"
onblur="SwapStyle('ui_rcmedit','msrs-MenuUIItemTableCell');"><a onclick="HideMenu();" href="javascript:__doPostBack('contextMenuCollection$ReportContextMenuIdDiv$ctl37','')"><Span class="msrs-menuItemImageContainer"></Span><Span
class="msrs-menuItemLabelContainer">Manage</Span></a></td>
   </tr>
   <tr>
    <td id="ui_rcmdownload" class="msrs-MenuUIItemTableCell" group="2" onmouseover="FocusContextMenuItem('ui_rcmdownload','msrs-MenuUIItemTableHover','msrs-MenuUIItemTableCell');" onmouseout="SwapStyle('ui_rcmdownload','msrs-MenuUIItemTableCell');"
onblur="SwapStyle('ui_rcmdownload','msrs-MenuUIItemTableCell');"><a onclick="HideMenu();" href="javascript:__doPostBack('contextMenuCollection$ReportContextMenuIdDiv$ctl41','')"><Span class="msrs-menuItemImageContainer"><img
alt="" src="/Reports/images/DownloadFile.gif" style="border-width:0px;" /></Span><Span class="msrs-menuItemLabelContainer">Download...</Span></a></td>
   </tr>
   <tr id="OGUL:2ReportContextMenuIdDiv">
    <td><Div class="msrs-MenuUISeparator">#</Div></td>
   </tr>
   <tr>
    <td id="ui_rcmeditrb" class="msrs-MenuUIItemTableCell" group="3" underline="OGUL:2ReportContextMenuIdDiv" onmouseover="FocusContextMenuItem('ui_rcmeditrb','msrs-MenuUIItemTableHover','msrs-MenuUIItemTableCell');"
onmouseout="SwapStyle('ui_rcmeditrb','msrs-MenuUIItemTableCell');" onblur="SwapStyle('ui_rcmeditrb','msrs-MenuUIItemTableCell');"><a onclick="HideMenu();" href="javascript:__doPostBack('contextMenuCollection$ReportContextMenuIdDiv$ctl48','')"><Span
class="msrs-menuItemImageContainer"><img alt="" src="/Reports/images/report_edit_01.gif" style="border-width:0px;" /></Span><Span class="msrs-menuItemLabelContainer">Edit
in Report Builder</Span></a></td>
   </tr>
  </table>
</div>
</div></form></BODY></HTML>
   at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
   at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
   at Microsoft.SqlServer.ReportingServices.ReportService2005.ReportingService2005.ListChildren(String Item, Boolean Recursive)
   at Microsoft.Mbam.Setup.Common.ParameterValidation.IsValidSsrsUrlToMbamReports(Uri uri, Boolean testUri)
   at Microsoft.Mbam.Setup.WebAdministration.HelpDeskProvider.CheckReportsUrl()
   at Microsoft.Mbam.Setup.Common.ActionItemQueue.Run()
   at Microsoft.Mbam.Setup.WebAdministration.WebProviderBase`1.CheckPrereqs(IProgress`1 progress, CancellationToken cancellationToken, T configuration)
   at Microsoft.Mbam.Setup.Common.FeatureProviderBase`1.<>c__DisplayClass34`1.<InvokeAsync>b__33()
   at System.Threading.Tasks.Task`1.InnerInvoke()
   at System.Threading.Tasks.Task.Execute()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.Mbam.Setup.Common.FeatureProviderBase`1.<InvokeAsync>d__36`1.MoveNext()</Data>
</EventData>
</Event>

I finally found the problem.
I had the reporting services url wrong.
http://sccmserver/Reports (this connects successfully but is wrong.)
The wizard would say the path was wrong so I changed it by drilling further into the report server.
By selecting the Bitlocker folder.
Then the wizard stopped showing the red error wrong path but it turns out it was still the wrong path.
A bit misleading. I noticed on my SCCM server in the Reporting Services Configuration Manager under Report manager URL,
http://sccmserver/ReportServer Typed this in and finished the wizard for the first time. :)

Acrobat XI Pro crashing, faulting module: TOUCHUP.API

Acrobat XI Pro 11.0.4.63 (running on W7 Pro + SP1, 64-bit) has suddenly begun to crash when moving text fields in forms. I am now unable to add or edit any text in text fields of any PDF form. No updates, installations or system changes were made prior to, or at the onset of, this issue
I have attempted: Disable antivirus; use safe mode; repair install; remove faulting plugin from reference path and repair install; uninstall + CClean registry + full reinstall; and full reinstall without any updates. Acrobat software is unusable in its current state. I would appreciate some help!
Other Adobe products currently installed:
AIR 3.5.0.1060
Download Assistant 1.2.5
Flash Player 11 ActiveX 11.9.900.117
Flash Player 11 Plugin 11.9.900.117
Reader XI 11.0.05
Error from event logs:
Log Name:      Application
Source:        Application Error
Date:          11/15/2013 11:44:48
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Description:
Faulting application name: Acrobat.exe, version: 11.0.4.63, time stamp: 0x52288928
Faulting module name: TouchUp.api, version: 11.0.4.63, time stamp: 0x5228881c
Exception code: 0xc0000005
Fault offset: 0x00018640
Faulting process id: 0x16e0
Faulting application start time: 0x01cee221f2859d70
Faulting application path: C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Acrobat.exe
Faulting module path: C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\TouchUp.api
Report Id: 3d30639b-4e15-11e3-966b-1803732675a0

I have the same problem with KERNELBASE.dll but the procedure is the same, I change into something thanks
Nome dell'applicazione che ha generato l'errore: Acrobat.exe, versione: 11.0.4.63, timestamp: 0x52288928
Nome del modulo che ha generato l'errore: KERNELBASE.dll, versione: 6.1.7601.18409, timestamp: 0x53159a86
Codice eccezione: 0xc06d007e
Offset errore 0x0000c42d
ID processo che ha generato l'errore: 0x18ec
Ora di avvio dell'applicazione che ha generato l'errore: 0x01cf833d351b70ed
Percorso dell'applicazione che ha generato l'errore: C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Acrobat.exe
Percorso del modulo che ha generato l'errore: C:\Windows\syswow64\
Nome dell'applicazione che ha generato l'errore: Acrobat.exe, versione: 11.0.4.63, timestamp: 0x52288928
Nome del modulo che ha generato l'errore: KERNELBASE.dll, versione: 6.1.7601.18409, timestamp: 0x53159a86
Codice eccezione: 0xc06d007e
Offset errore 0x0000c42d
ID processo che ha generato l'errore: 0x18ec
Ora di avvio dell'applicazione che ha generato l'errore: 0x01cf833d351b70ed
Percorso dell'applicazione che ha generato l'errore: C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Acrobat.exe
Percorso del modulo che ha generato l'errore: C:\Windows\syswow64\KERNELBASE.dll
ID segnalazione: 730f9cd2-ef30-11e3-a912-00269e8fad5f
ID segnalazione: 730f9cd2-ef30-11e3-a912-00269e8fad5f

Incorrect fault status - why is it not possible to...

We have had a fault on our phone line since last week - VOL051-115******, initially it was a very noisy line which was also killing the meagre broadband speed we normally make do with. When the fault was reported a line test was run which was passed - I assume it just checks connectivity rather than line quality, and the fault was blamed on our internal cabling (which we don't have any of, it's all wireless from the master socket) plus the fault is still apparent when connecting directly to the test socket.
The line has now degraded so much that we do not even get a dial tone (none for the last 3 days) but the fault still blames our nonexistent internal wiring. How can I get this fault status corrected?, if it stays like this nothing is going to be done to fix the real fault. I can’t raise a new fault online because it says there is a fault already on the line which means the line test doesn't even get done so it looks like my only option is to sit in a phone queue for at least ¼ of a hour being charged by the minute because I am forced to use a mobile.

Hi
I suggest that you get back to the Faults dept on 0800 800 151 and inform them that you now have no dial tone in the test socket, they should be able to change the fault location on their system which should progress to Openreach to attend.
Can I also suggest you remove the VOL number from your original post.
(If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
If I have solved your Issue please click the "Mark as accepted solution" button.

Issue in propagating the fault in BPEL

Hi,
I have an issue in propagating the fault in BPEL.
This is the scenario,
a) I have a BPEL process which inserts data to a table, where a column is a primary key.
b) I invoke this BPEL as a partner link in another BPEL process.
c) I have provided catch for primary key violation in the invoking BPEL process.
Here, it throws below remote fault:
When invoking locally the endpoint 'http://localhost:7777/orabpel/default/InsertExceptionGen/1.0', ; nested exception is:
com.oracle.bpel.client.delivery.ReceiveTimeOutException: Waiting for response has timed out. The conversation id is bpel://localhost/default/HandlingESBFaultInsert1~1.0/20502-BpInv0-BpSeq1.6-2. Please check the process instance for detail.
But In the case of ESB, I could able to handle the primary key violation fault.
ie)
a) An esb process inserts data into a table, where a column is a primary key.
b) A BPEL process invoke this esb as a partner link.
c) In the invoking BPEL process, provided catch for primary key violation.
Pls. someone throw some light on this.
Thanks
Jude.

BPEL process should get a bindingFault for any application related errors.
since it received remote fault, may be some problem with connectivity.check the timeout values in the bpel configuration.

Need help removing MBAM 2.5 SCCM integration from SCCM 2012!!

Hi there,
I upgraded the infrastructure from MBAM 2.0 SP1 to MBAM 2.5. We have three server infrastructure. Everything is working fine except the computers wont show up under MBAM computer collection.
I am trying to remove MBAM 2.5 SCCM integration feature from my SCCM 2012 and reinstall it. When I try to uninstall it, it fails and says " setup failed to update MBAM. Fix the issue and run setup again.
For more information, review the setup log file.
This is the log file:
[13E8:1494][2015-04-09T10:27:30]i001: Burn v3.7.1224.0, Windows v6.2 (Build 9200: Service Pack 0), path: C:\ProgramData\Package Cache\{361e0078-625a-4d34-a8fd-7cac477cf297}\MbamServerSetup.exe, cmdline: '/uninstall -burn.unelevated BurnPipe.{614807DE-1C28-4AF6-9D35-D96A2C18F49F}
{4D8799C7-35F5-4852-8DD9-C9F1A150F41D} 5496'
[13E8:1494][2015-04-09T10:27:30]i000: Initializing numeric variable 'INSTALLLOGMODE_FATALEXIT' to value '1'
[13E8:1494][2015-04-09T10:27:30]i000: Initializing numeric variable 'INSTALLLOGMODE_ERROR' to value '1'
[13E8:1494][2015-04-09T10:27:30]i000: Initializing numeric variable 'INSTALLLOGMODE_WARNING' to value '1'
[13E8:1494][2015-04-09T10:27:30]i000: Initializing numeric variable 'INSTALLLOGMODE_USER' to value '1'
[13E8:1494][2015-04-09T10:27:30]i000: Initializing numeric variable 'INSTALLLOGMODE_INFO ' to value '1'
[13E8:1494][2015-04-09T10:27:30]i000: Initializing numeric variable 'INSTALLLOGMODE_RESOLVESOURCE' to value '1'
[13E8:1494][2015-04-09T10:27:30]i000: Initializing numeric variable 'INSTALLLOGMODE_OUTOFDISKSPACE' to value '1'
[13E8:1494][2015-04-09T10:27:30]i000: Initializing numeric variable 'INSTALLLOGMODE_ACTIONSTART' to value '1'
[13E8:1494][2015-04-09T10:27:30]i000: Initializing numeric variable 'INSTALLLOGMODE_ACTIONDATA' to value '1'
[13E8:1494][2015-04-09T10:27:30]i000: Initializing numeric variable 'INSTALLLOGMODE_VERBOSE' to value '1'
[13E8:1494][2015-04-09T10:27:30]i000: Initializing numeric variable 'INSTALLLOGMODE_PROPERTYDUMP' to value '1'
[13E8:1494][2015-04-09T10:27:30]i000: Initializing numeric variable 'INSTALLLOGMODE_COMMONDATA' to value '1'
[13E8:1494][2015-04-09T10:27:30]i000: Setting string variable 'WixBundleLog' to value 'C:\Users\PWAGHW~1\AppData\Local\Temp\Microsoft_BitLocker_Administration_and_Monitoring_20150409102730.log'
[13E8:1494][2015-04-09T10:27:30]i052: Condition 'VersionNT >= v6.1' evaluates to true.
[13E8:1494][2015-04-09T10:27:30]i000: Loading managed bootstrapper application.
[13E8:1494][2015-04-09T10:27:30]i000: Creating BA thread to run asynchronously.
[13E8:1924][2015-04-09T10:27:30]i000: Running WixBa
[13E8:1494][2015-04-09T10:27:30]i100: Detect begin, 1 packages
[13E8:1494][2015-04-09T10:27:30]i000: Setting numeric variable 'ISMBAM21ALREADYINSTALLED' to value 2
[13E8:1494][2015-04-09T10:27:30]i000: Setting numeric variable 'ISMBAM25ALREADYINSTALLED' to value 3
[13E8:1494][2015-04-09T10:27:30]i000: Setting numeric variable 'ISMBAMALREADYINSTALLED' to value 2
[13E8:1494][2015-04-09T10:27:30]i000: Setting numeric variable 'ISNETFRAMEWORK45' to value 1
[13E8:1494][2015-04-09T10:27:30]i101: Detected package: MBAMServer.msi, state: Present, cached: Complete
[13E8:1494][2015-04-09T10:27:30]i199: Detect complete, result: 0x0
[13E8:1494][2015-04-09T10:27:30]i100: Detect begin, 1 packages
[13E8:1494][2015-04-09T10:27:30]i000: Setting numeric variable 'ISMBAM21ALREADYINSTALLED' to value 2
[13E8:1494][2015-04-09T10:27:30]i000: Setting numeric variable 'ISMBAM25ALREADYINSTALLED' to value 3
[13E8:1494][2015-04-09T10:27:30]i000: Setting numeric variable 'ISMBAMALREADYINSTALLED' to value 2
[13E8:1494][2015-04-09T10:27:30]i000: Setting numeric variable 'ISNETFRAMEWORK45' to value 1
[13E8:1924][2015-04-09T10:27:30]i000: Creating a UI
[13E8:1494][2015-04-09T10:27:30]i101: Detected package: MBAMServer.msi, state: Present, cached: Complete
[13E8:1494][2015-04-09T10:27:31]i199: Detect complete, result: 0x0
[13E8:1924][2015-04-09T10:27:32]i000: SQM opt in:
[13E8:1924][2015-04-09T10:27:32]i000: MU opt in:
[13E8:1924][2015-04-09T10:27:32]i000: Installation Location:
[13E8:1494][2015-04-09T10:27:32]i200: Plan begin, 1 packages, action: Uninstall
[13E8:1494][2015-04-09T10:27:32]i000: Setting string variable 'WixBundleRollbackLog_MBAMServer.msi' to value 'C:\Users\PWAGHW~1\AppData\Local\Temp\Microsoft_BitLocker_Administration_and_Monitoring_20150409102730_0_MBAMServer.msi_rollback.log'
[13E8:1494][2015-04-09T10:27:32]i000: Setting string variable 'WixBundleLog_MBAMServer.msi' to value 'C:\Users\PWAGHW~1\AppData\Local\Temp\Microsoft_BitLocker_Administration_and_Monitoring_20150409102730_0_MBAMServer.msi.log'
[13E8:1494][2015-04-09T10:27:32]i201: Planned package: MBAMServer.msi, state: Present, default requested: Absent, ba requested: Absent, execute: Uninstall, rollback: Install, cache: No, uncache: Yes, dependency: Unregister
[13E8:1494][2015-04-09T10:27:32]i299: Plan complete, result: 0x0
[13E8:1494][2015-04-09T10:27:32]i300: Apply begin
[1578:0914][2015-04-09T10:27:32]i360: Creating a system restore point.
[1578:0914][2015-04-09T10:27:32]i362: System restore disabled, system restore point not created.
[1578:0914][2015-04-09T10:27:32]i326: Removed dependency: {361e0078-625a-4d34-a8fd-7cac477cf297} on package provider: {5F17D209-508F-4BFF-AE47-5C46BEE48C99}, package MBAMServer.msi
[1578:0914][2015-04-09T10:27:32]i329: Removed package dependency provider: {5F17D209-508F-4BFF-AE47-5C46BEE48C99}, package: MBAMServer.msi
[1578:0914][2015-04-09T10:27:32]i301: Applying execute package: MBAMServer.msi, action: Uninstall, path: C:\ProgramData\Package Cache\{5F17D209-508F-4BFF-AE47-5C46BEE48C99}v2.5.0244.0\MBAMServer.msi, arguments: ' ARPSYSTEMCOMPONENT="1" MSIFASTINSTALL="7"
INSTALLDIR="" OPTIN_FOR_MICROSOFT_UPDATES="" CEIPENABLED="" WIXFAILWHENDEFERRED="" FORCE_UNINSTALL=""'
[1578:0914][2015-04-09T10:27:35]e000: Error 0x80070643: Failed to uninstall MSI package.
[1578:0914][2015-04-09T10:27:35]e000: Error 0x80070643: Failed to execute MSI package.
[13E8:1494][2015-04-09T10:27:35]e000: Error 0x80070643: Failed to configure per-machine MSI package.
[13E8:1494][2015-04-09T10:27:35]i319: Applied execute package: MBAMServer.msi, result: 0x80070643, restart: None
[13E8:1494][2015-04-09T10:27:35]e000: Error 0x80070643: Failed to execute MSI package.
[1578:0914][2015-04-09T10:27:35]i318: Skipped rollback of package: MBAMServer.msi, action: Install, already: Present
[13E8:1494][2015-04-09T10:27:35]i319: Applied rollback package: MBAMServer.msi, result: 0x0, restart: None
[1578:0914][2015-04-09T10:27:35]i323: Registering package dependency provider: {5F17D209-508F-4BFF-AE47-5C46BEE48C99}, version: 2.5.0244.0, package: MBAMServer.msi
[1578:0914][2015-04-09T10:27:35]i325: Registering dependency: {361e0078-625a-4d34-a8fd-7cac477cf297} on package provider: {5F17D209-508F-4BFF-AE47-5C46BEE48C99}, package: MBAMServer.msi
[13E8:1494][2015-04-09T10:27:35]i399: Apply complete, result: 0x80070643, restart: None, ba requested restart: No
[13E8:1494][2015-04-09T10:29:52]i500: Shutting down, exit code: 0x80070643
[13E8:1494][2015-04-09T10:29:52]i410: Variable: INSTALLLOGMODE_ACTIONDATA = 1
[13E8:1494][2015-04-09T10:29:52]i410: Variable: INSTALLLOGMODE_ACTIONSTART = 1
[13E8:1494][2015-04-09T10:29:52]i410: Variable: INSTALLLOGMODE_COMMONDATA = 1
[13E8:1494][2015-04-09T10:29:52]i410: Variable: INSTALLLOGMODE_ERROR = 1
[13E8:1494][2015-04-09T10:29:52]i410: Variable: INSTALLLOGMODE_FATALEXIT = 1
[13E8:1494][2015-04-09T10:29:52]i410: Variable: INSTALLLOGMODE_INFO = 1
[13E8:1494][2015-04-09T10:29:52]i410: Variable: INSTALLLOGMODE_OUTOFDISKSPACE = 1
[13E8:1494][2015-04-09T10:29:52]i410: Variable: INSTALLLOGMODE_PROPERTYDUMP = 1
[13E8:1494][2015-04-09T10:29:52]i410: Variable: INSTALLLOGMODE_RESOLVESOURCE = 1
[13E8:1494][2015-04-09T10:29:52]i410: Variable: INSTALLLOGMODE_USER = 1
[13E8:1494][2015-04-09T10:29:52]i410: Variable: INSTALLLOGMODE_VERBOSE = 1
[13E8:1494][2015-04-09T10:29:52]i410: Variable: INSTALLLOGMODE_WARNING = 1
[13E8:1494][2015-04-09T10:29:52]i410: Variable: ISMBAM21ALREADYINSTALLED = 2
[13E8:1494][2015-04-09T10:29:52]i410: Variable: ISMBAM25ALREADYINSTALLED = 3
[13E8:1494][2015-04-09T10:29:52]i410: Variable: ISMBAMALREADYINSTALLED = 2
[13E8:1494][2015-04-09T10:29:52]i410: Variable: ISNETFRAMEWORK45 = 1
[13E8:1494][2015-04-09T10:29:52]i410: Variable: VersionNT = 6.2.0.0
[13E8:1494][2015-04-09T10:29:52]i410: Variable: WixBundleAction = 3
[13E8:1494][2015-04-09T10:29:52]i410: Variable: WixBundleElevated = 1
[13E8:1494][2015-04-09T10:29:52]i410: Variable: WixBundleInstalled = 1
[13E8:1494][2015-04-09T10:29:52]i410: Variable: WixBundleLog = C:\Users\PWAGHW~1\AppData\Local\Temp\Microsoft_BitLocker_Administration_and_Monitoring_20150409102730.log
[13E8:1494][2015-04-09T10:29:52]i410: Variable: WixBundleLog_MBAMServer.msi = C:\Users\PWAGHW~1\AppData\Local\Temp\Microsoft_BitLocker_Administration_and_Monitoring_20150409102730_0_MBAMServer.msi.log
[13E8:1494][2015-04-09T10:29:52]i410: Variable: WixBundleManufacturer = Microsoft Corporation
[13E8:1494][2015-04-09T10:29:52]i410: Variable: WixBundleName = Microsoft BitLocker Administration and Monitoring
[13E8:1494][2015-04-09T10:29:52]i410: Variable: WixBundleOriginalSource = C:\Users\pwaghwani\Desktop\mu_microsoft_desktop_optimization_pack_2014_r2_x86_x64_dvd_6110480\MBAM\MBAM 2.5\Installers\x64\MbamServerSetup.exe
[13E8:1494][2015-04-09T10:29:52]i410: Variable: WixBundleProviderKey = {361e0078-625a-4d34-a8fd-7cac477cf297}
[13E8:1494][2015-04-09T10:29:52]i410: Variable: WixBundleRollbackLog_MBAMServer.msi = C:\Users\PWAGHW~1\AppData\Local\Temp\Microsoft_BitLocker_Administration_and_Monitoring_20150409102730_0_MBAMServer.msi_rollback.log
[13E8:1494][2015-04-09T10:29:52]i410: Variable: WixBundleTag =
[13E8:1494][2015-04-09T10:29:52]i410: Variable: WixBundleVersion = 2.5.244.0
[13E8:1494][2015-04-09T10:29:52]i007: Exit code: 0x80070643, restarting: No
Thanks for your help!!
Thanks, Prakash Waghwani Microsoft E-Learning Support Team

have you tried to run it from an elavated prompt ?
/Oliver

MBAM 2.5 InvalidKeyID Fault

Similar Messages

Maybe you are looking for