MBAM 2.5 Unable to find compatible TPM despite TPM available and device encrypted

We have just installed and are piloting MBAM 2.5. Everything seems to have gone fine, machines are checking in getting policies, encrypting as they are supposed to and we can query MBAM for recovery keys and TPM passwords to do recoveries as needed.
The only issue we have is when we come to look at the compliance reports we see the following
Enterprise Compliance report - Machines show 'Unable to find compatible TPM'
In Computer Compliance report for one of these machines , Protector type is TPM+PIN, Protector state is ON, Encryption State is Encrypted yet compliance status is Non-Compliant.
TPM is ON, Initialised and is v1.2
Any suggestions as to why my machines status is non-compliant?

I was having the same problem with some of my Dell Laptop clients and although the Hotfix did solve the problem, I thought it was worth mentioning the first time the client reported back to MABM after installing the hotfix, only the Compliance Status changed
from "Non-Compliant" to "Compliant" and the Compliance Status Details still showed "Unable to find compatible TPM". It took one more reporting cycle for the Compliance Status Details to show "No Error". I
would also like to mention there is no indication of anything wrong with these systems in terms of looking at them via the TPM.msc, MBAM Event Log or WMI Win32_Tpm class/properties. The systems encrypt the drive via MBAM normally...they just don't
report back to the MABM database properly. The computers are running the latest BIOS and I have reset the TPM Security BIOS settings back to their Defaults several times with the same results. Thanks for the hotfix!!!

Similar Messages

Unable to find compatible TPM

Hello there.
We have a few machines, with the correct (generic) TPM driver discovered by Windows 7 and the enabling of TPM in the BIOS, that still do not get encrypted and are complaining to the MBAM console that they are "Unable to find compatible TPM."
Any idea what else might be ailing those workstations?

What version of TPM is on the machine? Is the TPM initialized?
You could find it by typing TPM.msc from run.

In an MBAM report, what does "Unable to Find Compatible TPM" mean?

All of our machines are fairly new and have recent TPM chips. Does this error mean:
1. The TPM is not enabled in the BIOS.
2. The TPM is enabled in the BIOS, but no one has taken ownership of it?
3. It could mean either of the above cases.
If it just needs to have someone take ownership of it, is there a way to do that remotely via the manage-bde.exe tool?

"To enable BitLocker you need to have the following requirements satisfied...
The computer must have a version 1.2 TPM chip or later.
The BIOS must support Trusted Computing Group (TCG) specifications.
The TPM chip must be enabled in the BIOS.
Above error indicates that you are missing the requirements..."
When I try to enable bit locker it gives me an error and won't allow me to enable it.
http://www.pcandtablet.com/windows-8-errors-and-crashes/273/when-i-try-to-enable-bit-locker-it-gives-me-an-error-and-wont-allow-me-to-enable-it.html
http://www.howtogeek.com/howto/6229/how-to-use-bitlocker-on-drives-without-tpm/
Hetti Arachchige V Aravinda |
Microsoft Community Support |
Windows Tech Information
(B.Sc, Microsoft Small Business Specialist, Dip. in Network Administration, MCP, MCTS,
MCSA, MCSE, MCITP, CCNA, MBCS)
Don't forget to mark this as helpful if you found this is helpful ,and its the answer mark this as answer.

Chnfind unable to find the decimal type by variable and sometimes "Round" command

Dear all,
During the work with Diadem I got two troubles. Could you please take a look and show me the wrong if you find the issue?
1.) Here is my trouble as we see the photo below. It is most important problem which I have. I really have no idea why it could happened. It is alway happened to find a value with decimal type's variable, and even that variable is changed to "str()".
setlocale("en-gb")
dim Min_point,Index_low,result
Min_point=val(Data.Root.ChannelGroups(1).Channels("CopyYangle").Properties("minimum").Value)
Min_point=round(Min_point,6)
Min_point=str(Min_point)
msgbox("The Min.Value is: "&Min_point)
Index_low=Chnfind("ch(""CopyYangle"")<="&Min_point&"", 1)
msgbox("Index No. of Min. Value is: "&Index_low)
Index_low=Chnfind("ch(""CopyYangle"")<=-0.11374 ", 1)
msgbox("Index No. of Min. Value is: "&Index_low)
2.) Still the problem with ChnFind() or ChnFindreverse(). If I change the Rounds off a number to the nearest integer with the function "Round()" it might not work in ChnFindreverse(). Such like it works under 4, 6, 8 and even 7 but doesn't work with 3 and 5. Is this logical?
setlocale("en-gb")
Dim XE, Xchannel, Ychannel,round_N0
Xchannel = "[2]/Right"
T1 = Xchannel
R1 =val(Data.Root.ChannelGroups(2).Channels("Right").Properties("maximum").Value)
round_N0=4 ' <========= 3 and 5 Not work, 4, 6, 7, 8 .... work
R1 =round(R1,round_N0) ' <=========
msgbox("Max. point is: " &R1 &VbCrlf& "Round Nr is: "&round_N0)
L1 = ChnFindReverse ("Ch(T1)>=R1",0)
msgbox("Index number for Max.Point is: "&L1 &VbCrlf& "Round Nr is: "&round_N0)
.tdx is a valid extensions for an attachement?
If you couldn't open the TMD file. Please remove ".tdv" the attacments file name to make sure it is "ChnFind.tdx" but not "ChnFind.tdx.tdv".
Kind regards / Mit freundlichen Grüßen
J.Huang
Attachments:
ChnFind.TDM ‏5 KB
ChnFind.tdx.tdv ‏39 KB

Hello J.Huang,
I downloaded the files and was able to get it to work. It looks like when you format the minimum value to a string, you loose precision and then ChnFind doesn't find the value your are looking for. He is an example which worked for me :
Set oChnY = Data.Root.ChannelGroups(2).Channels("Right")
sgValue = str(oChnY.Properties("minimum").Value,"d.ddddddddddddddd")
Index = ChnFindReverse("Y<="&sgValue,,Array("Y"),Array(oChnY))
LogFileWrite(Index)
Using symbols (parameters 3 and 4) is not necessary to get the solution. The key is teh second value for "str" which formats using more digits. As soon as you reduce the number of digits, you may no longer get a result.
Ther is an alternative to ChnFind, in case there is only one occurance in teh signal which has the minimum value
Set oChnY = Data.Root.ChannelGroups(2).Channels("Right")
Index = PNo(oChnY,oChnY.Properties("minimum").Value)
LogFileWrite(Index)
I hope one of the two options works for you. I tested the approach with teh first channel too and it worked as well

I have configured bowser url in about:config from there onwords i am unable to find orange box on left corner and menu on the right corner as well as navigation

i have configured browser URL at about:config from there onwords i am not able to find orange box,menu,navigation every thing and before opening firefox it is asking permission every time

What kind of permission do you mean?
Do you mean about making changes?
A possible cause of this error is that Firefox is set to run as Administrator.
Check that Firefox isn't set to run as Administrator.
Right-click the Firefox desktop shortcut and choose "Properties".
Make sure that all items are deselected in the "Compatibility" tab of the Properties window.
* Privilege Level: "Run this program as Administrator" should not be selected
* "Run this program in compatibility mode for:" should not be selected
Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: Command+Shift+F).
*https://support.mozilla.org/kb/how-to-use-full-screen
You can use one of these to set which toolbars to show.
*"3-bar" Firefox menu button > Customize > Show/Hide Toolbars
*View > Toolbars (press F10 to show the Menu bar)
*Right-click empty toolbar area

"Unable to find Pdf Resource files"

I am getting an error message on start up in Windows XP after a recent update. On start up I get the mesaage "Unable to find Pdf Resource files" C:\Documents and Settings\......\Adobe\Adobe PDF\Settings\*.Joboptions
Do you want to run the installer in repair mode.
I have seen several fixes for similar problems but nothing relating to the error occurring at start up.
I would be grateful if you could suggest a solution. I have reinstalled Adobe Pro V8 and the error is still there

In the default settings, it shows "Standard". Try going to the menu above labelled settings and you will likely see an edit options selection. See if you can edit the selection. You can also try selecting other settings with the arrow at the right side of the settings selection (It is a select box) to see if other files are available. You should also be able to see the settings file in the printer properties and be able to edit it also. Trying these games may home in on the problem, particularly if it indicates you do not have access.
Just as a check, open an application that you might like to print to PDF. Then go to the print menu and select print-to-file with the Adobe PDF printer. Once you have that file printed, open it in Distiller and see if you get the proper processing. This manual process is the most basic of the PDF creation processes in Acrobat. All of the other processes build on it. Thus we are checking basic functionality to be sure I did not miss something as we went along.
If the print-to-file works out to give you a PDF, then try printing to the printer without that option selected and hopefully the PDF is created directly (no manual step with Distiller). Each of the next steps would go up the chain in the checkout.
Bill

Unable to find TUPEL attribute in ppoma_crm

Hello All,
We are implementing SAP CRM 7.0 Version enhancement pack 2.0, in ppoma_crm we are not able to see the attributes like TUPEL or division or distribution channel, please advice.
I am pasting screen shots of my ppoma_crm
The relevant Sales Org under the function tab is checked
The objects permitted under determination are also checked for my sales scenario
When I scroll below to check my attributes I am unable to find the attributes Tupel,Distribution channel and Division.kindly advice.
Kind Regards
Atul

Hi Kamlendra,
1) The report CRMC_R3_ORG_GENERATE was run without error's
2) Also check your org stricture- division and distribution channel will come under function tab- All my distribution channels and divisions have come under the function tab.
3) Run the report CRM_MKTBP_ZCACL_UPDATE_30 in SA38- Could you please throw light on this report, since we have not run this report, will the issue get resolved after running the report?
Kind Regards
Atul

Unable to find??? What does this mean?

First off I will explain what I was doing before I encountered trouble. I was attempting to print a USPS shipping label and I believe it had something to do with Adobe. I had early printed a sample label without any trouble. But when I went to print a real label it was giving me issues. Then everything(even simple Microsoft works documents, it was telling me to save the file. It was giving me a save as and the file was .xps I attempted to do a system restore to another point and that didn't fix it. Somewhere I think I deleted a file or something. I understand computers pretty well, but shows what happens someone who doesn't have a clue gets themselves into trouble.
But anyways now when I turn on my computer and it loads up I get this message
Unable to find C:\ProgramData\AdobePDF\Settings\*.joboptions"
And it says I must be an adminstrator to load these files or something.
If anyone can help me I appreciate it very much. I have since uninstalled Adobe Reader and Re-installed it and I still get this message. So how do I solve this trouble? Computer was working fine until this incident.

can you try uninstall, reboot and run the cleaner form
http://support.microsoft.com/kb/290301, reboot
again using admin power ID look if you still have traces of acrobat reader in the application folder of all users, admin, your own ID
if needed manual remove them all after full backup,
also do
reg query "hklm\software\adobe\Acrobat Reader"
reg query "hkcu\software\adobe\Acrobat Reader" form your regular ID
be sure there is not any
if there are, you best do a backup before deleting anything.
if all fails. do windows repair
Hopefully you have access to the owner id , admin ID, or
windows install disk/restore image along wiht all software install source

CS2 Unable to find file errors

Hi
We are having trouble with photoshop cs2. We can not open most files. Tiff, PSD, some PDF files will give an "unable to find file error". Jpg files, and certain PDF files and TIFF files that use jpg compression work. I have tried resetting all the settings, changing scratch disks / memory usage, uninstalling all fonts, and reinstalling the application and the problem persists.
Also i do not know if this is related but the same time we started having errors in photoshop we also have problems in Microsoft Word. The font list shows a lot of fonts as just a white box. Other apps can use the fonts fine. Just not in word.
I have attatched a JPG file with screen caps of the errors.

I reset the options by doing the hold shift alt ctrl while starting up photoshop. Also i deleted all the preference files out of the application data\adobe\photoshop folder. Same problem persists.
Also another issue i have noticed. Say you perform an action like erasing somthing, or changing the brightness/contrast. You can not see the changes until you click on a different tool. Then it updates the display.
I will try and locate the faq and see what it says.

Unable To Find Source While Debugging in Workspace Studio

I am running a jsf and Spring enabled web app in Workspace studio 1.1. I have two projects in the same workspace that are components used by the web app. When debugging I am unable to step into the code in those projects, although the debugger appears to recognize the breakpoints.
I have tried including the projects in the java build path of the web app, and also tried including them as jars in a lib folder and then trying to 'attach source' to the jars. Neither one works. When I just include the projects in the build path, I am able to build the web app, but unable to deploy it. The spring context servlet is unable to find the classes in those projects and the app fails to deploy. When I include them as jars, I can build and deploy, but am unable to 'attach source'.
Any ideas as to what the problem may be? I've done both of the things described above in Eclipse in the past with no issues.
Edited by: user12016726 on Oct 7, 2009 6:01 AM

This is the log entry when the deployment fails:
####<Oct 7, 2009 8:28:04 AM EDT> <Error> <org.springframework.web.context.ContextLoader> <PLCCT7PSDW0040> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1254918484376> <BEA-000000> <Context initialization failed
org.springframework.beans.factory.CannotLoadBeanClassException: Cannot find class [com.thehartford.commonlogin.services.security.authorization.CommonLoginRolesManager] for bean with name 'commonLoginRolesManager' defined in ServletContext resource [WEB-INF/applicationContext.xml]; nested exception is java.lang.ClassNotFoundException: com.thehartford.commonlogin.services.security.authorization.CommonLoginRolesManager

I own a MAC Pro 3,1 (early 2008) and am running Mavericks 10.9.3 with no problems. I would like to add an I/O card to add USB 3 functionality or ESATA functionality but am unable to find a compatible card. As such my question...can I do this and if so wha

I own a MAC Pro 3,1 (early 2008) and am running Mavericks 10.9.3 with no problems. I would like to add an I/O card to add USB 3 functionality or ESATA functionality but am unable to find a compatible card. As such my question...can I do this and if so what is the best card?
Thank you

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
Also see:
https://discussions.apple.com/thread/6282459?tstart=0

Hi, I am using my icloud on my iphone but am unable to find it on my mac book pro. It's not under my system preferences like it shows under the setup. Can I download it again? Or something. I just need to backup some files on my computer and am unable.

Hi, I am using my icloud on my iphone but am unable to find it on my mac book pro. It's not under my system preferences like it shows under the setup. Can I download it again? Or something. I just need to backup some files on my computer and am unable.

The minimum requirement for iCloud is Lion 10.7.5 (Mavericks preferred): the iCloud Preference Pane does not appear on earlier systems - the MobileMe pane appears on Lion and earlier but is now non-functional - you cannot now open or access a MobileMe account.
To make use of iCloud you will have to upgrade your Mac to Lion or Mavericks, provided it meets the requirements.
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Lion is available in the Online Apple Store ($19.99). Mountain Lion (10.8.x) is also available there at the same price but there seems little point as the system requirements are the same for Mavericks (10.9.x) - which is free - unless you need to run specific software which will run on Mountain Lion only.
The requirements for Mountain Lion and Mavericks are:
OS X v10.6.8 or later
2GB of memory
8GB of available space
and the supported models are:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
It is available from the Mac App Store (in Applications).
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table

Photosmart 5510 unable to find my MacBook pro.

I have read many posts with regards to scanner and printing issues with printer compatible AirPrint. I have tried all solutions by the experts but my printer cannot scan from computer, error message is "unable to find computer make sure printer is connected to a network and turned on". I find that not all the setting are available in order to turn on Scan to Computer. I have tried two HP printers Photosmart 5510 and 3050 both with same results, I have eventually established a more permanent connection by selecting the Bonjour name for the printer when adding a printer to Print & Scan, not the HP name.The HP software did not appear to work for me as it was unable to find the wireless printer on the network. So I used the option to obtain wireless connection to my router using the printer panel, then adding the printer from Print & Scan and ensure that AirPrint is selected not Printer Software.
I still have issues when printing from a web page but I can work around that as I also have IOS devices where I use HP Apps, even though Airprint should work on these devices without needing apps.
My OSX is Mountain Lion
Macbook is mid 2010
Printer is Photosmart5510 B111a

It sounds like the issue is with the printing system since Airprint works (which is a very different system all together). The scan function will not work with Airprint and the full featured drivers is required to have that functionality from HP. However, there are alternative ways to scan if you want some scanning functionality until the software issue is corrected.
Try resetting the printing system before continuing. Resetting the printing system will remove any printers from the system.
Have you tried installing the newest 10.8 full featured drivers from HP?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Unable to find an Instance of reporting services

Hi,
I doing a fresh installation of MBAM 2.5 and getting error "Unable to find an instance of Reproting service" during check prerequisites page.
Actually my SQL is running in cluster on different machine not on the same machine on which MBAM going to install.
And I don't how to bypass this screen so that I can configure the DB parameter for MBAM.
Please advise.

Hi pawar,
Before starting the Microsoft BitLocker Administration and Monitoring (MBAM) installation, we must complete some prerequisites. One of the prerequisite is we must Install Microsoft SQL Server with SQL_Latin1_General_CP1_CI_AS collation. And SSRS must be
installed and running during the MBAM Server installation. Configure SSRS in "native" mode and not in unconfigured or "SharePoint" mode. Then the user should have the following SQL Server Reporting Services instance rights: Create Folders and Publish Reports.
According to the error message, it seems that you haven’t installed Reporting Services in the same server. Please refer to the article to install the MBAM 2.5 Server:
http://technet.microsoft.com/en-us/library/dn645331.aspx
Besides, since the issue related to MBAM. It is out of the support boundaries of our forum, I suggest you post the question in the following forum:
http://social.technet.microsoft.com/Forums/en-us/home?category=MDOP&filter=alltypes&sort=lastpostdesc. It is appropriate and more experts will assist you.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Unable to Find Specified Objet

I am installing Consice Oxford Englis Dictionary that i down loadad from http://www.mobi-systems.com but its displaying
System:
Unable to find the specfied object. Any one have idea whyt his error is coming. Dictionary is compatible for Symbin Os.

The product is for Symbian Series 60 devices. 9500/9300/9300i are Series 80 devices.
- PetMessage Edited by realpet on 09-Feb-2006
01:11 PM

MBAM 2.5 Unable to find compatible TPM despite TPM available and device encrypted

Similar Messages

Maybe you are looking for