MBAM 2.5 Web Applications installation - "Web service application pool account is not valid"

Hi,
I've created a Server 2012R2 installation to install MBAM 2.5. When installing the Web Applications I keep getting "The web service application pool account is not valid".
The account I am using is a standard domain account with admin rights on the Server and I've also set the SPN (both netbios and FQDN) and Delegation.
This account is also a member of the group that is defined as RW of the SQL databases (which were setup without any problem and are on a separate Server 2008R2, SQL 2008R2 installation.
I am also getting an error with the SSRS URL , stating "SQL Server Reporting Services URL that points to the MBAM reports is not valid", despite being able to browse to the http://[FQDN]/ReportServer_MBAM location.
Thanks.

I got this kind of error when I revert back my virtual machine a lot to my previous checkpoints. I hope this can't be an issue for you.
Make sure the application pool account must have the following login roles on the SQL server and have following rights on the reporting instance:-
Required SQL Server permissions
The user responsible for installing MBAM database and reporting feature must have the local administrator privileges and the following log in permission:-
SQL Server instance login server roles:
dbcreator
processadmin
SQL Server Reporting Services instance rights:
Create Folder
Publish Reports
SQL Server Database Engine Services: SQL Server Database Engine Services must be installed and running during MBAM Server installation.
SQL Server Reporting Services (SSRS): SSRS must be installed and running during the MBAM Server installation. Configure SSRS in "native" mode and not in "SharePoint" mode.
Gaurav Ranjan

Similar Messages

TS1702 when i try to update an application it tells me that my account is not valid for use in the UK and have to switch to the australian store to update?how do i switch stores/countries for the applications?? Thanks.

when i try to update an application it tells me that my account is not valid for use in the UK and have to switch to the australian store to update?how do i switch stores/countries for the applications?? Thanks.

See > Change your iTunes Store country
Here > http://support.apple.com/kb/HT1311

Why Macromedia web site installs old version 9.0.115 and not the new 9.0.124?

Why Macromedia web site installs old version 9.0.115 and not
the new 9.0.124? I want the new version, but I can't get it!!!
Please fix the servers!
The download page says it's avaible the new version 9.0.124,
but after the installation I have the old 9.0.115.

Works fine for me on both Mac & Windows (Ie and
Firefox...)
As of April 8, 2008 developers can file Flash Player bugs in
the Flash Player Public Bug and Issue Management System.
https://bugs.adobe.com/flashplayer/
For further details, read: “About the Public Bug
Base”
http://www.adobe.com/devnet/logged_in/tmccauley_fplayer_bugbase.html
Please file a bug there.

Error occurred while accessing application id Excel services application unattended service account from secure store service

Hi,
I follow up the book "Professional SharePoint 2013 Administration" to build the SharePoint 2013 BI include Excel Services. and created the Secure Store services to save the user SP_Install for member.
For Now, I can upload the worksheet and open it in browser, but when I tried to refresh it, the SP 2013 show error "Error occurred while accessing application id Excel services application unattended service account from secure store service".
does anybody can help ? and do I need to turn on C2WTS ?
Thanks
James Liang

Hi James,
Excel Services can be used with Secure Store in three primary scenarios:
Unattended Service Account
Embedded Connections
External Data Connections
If you haven't configure unattended service account yet, you could refer to the article below:
http://technet.microsoft.com/en-us/library/hh525344(v=office.15).aspx
More information:
http://technet.microsoft.com/en-us/library/ff191191(v=office.15).aspx
Regards,
Rebecca Tu
TechNet Community Support

Difference between Professional application and self-service application

hi frntz,
May I know the difference between professional application and self-service application in oracle E-biz. Why we cant able to use both at same time ?

Hi;
Please check below which could be helpful for your issue:
http://download.oracle.com/tech/blaf/specs/blafusers.html
Regard
Helios

Reporting Service Integration mode and Key not valid for use in specified state

I had to uninstall SharePoint Foundation 2013 and reinstall it.
What I have done:
I uninstalled SharePoint and after that I removed all databases.
I reinstalled SharePoint Foundation 2013 and it completed without errors.
Everything else is working, except SSRS in Sharepoint Integrated Mode.
If I check Central Administration - Manage services on server, I can found out that SQL Server Reporting Service Service is
"Started". But if I try to create new service application (SQL Server Reporting Services Service Application), it gives me an error message:
"Key not valid for use in specified state. (Exception from HRESULT: 0x8009000B)"
I uninstalled SSRS in Sharepoint Integrated Mode and I reinstalled it but problems exists.
It seems that "Encryption Keys" cause this problem.
https://support.microsoft.com/kb/955757
https://msdn.microsoft.com/en-us/library/ms156010%28v=sql.110%29.aspx
I tried to Re-create Encryption Keys and Delete keys, but its not working either. It gives me only error message that:
"Unable to locate the Reporting Server Windows service for instance MSSQLSERVER."
I don't have any reporting server databases, because I removed all
databases when I uninstalled SharePoint. Also I don't have Encryption
Keys backups.
I have found several similar question but no answer, example here:
https://social.technet.microsoft.com/Forums/ie/en-US/df02dc05-5ce8-499d-9ba3-ab392a5fc3af/sharepoint-2013-ssrs-application-error-key-not-valid-for-use-in-specified-state-exception?forum=sharepointdevelopment
Any ideas how I can fix this problem?

Hi,
From the Reporting Server Configuration Manager you have to restore the encryption key.
Please try to delete databases(reportserver & reportservertempdb) and delete the reportserver and reports site on IIS. Then you have to start over the configuration again.
If the issue still exists, Please check ULS log to see if anything unexpected occurred.
For SharePoint 2013, by default, ULS log locates in
"C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS"
More information about SQL Reporting services Installation with SharePoint 2013 for your reference:
http://expertsharepoint.blogspot.de/2014/03/sql-reporting-services-installation.html
Best Regards,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Buy logic pro 9. installer write that the serial number is not valid.

buy logic pro 9. installer write that the serial number is not valid.

You bought the box or Logic Pro in the Mac App Store?
Yes, BOX
Message was edited by: VLyahov

LR 5 two installation. Dektop and Notebook. Notebook changed. LR 5 license deleted. New Notebook, new installation LR 5. Error Message, Key not valid at this status.

LR 5 two installation. Dektop and Notebook. Notebook changed. LR 5 license deleted. New Notebook, new installation LR 5. Error Message, Key not valid at this status. How can I do for the new installation.

Am 15.08.2014 14:03, schrieb dj_paige:
>
      LR 5 two installation. Dektop and Notebook. Notebook changed. LR
      5 license deleted. New Notebook, new installation LR 5. Error
      Message, Key not valid at this status.
created by dj_paige <https://forums.adobe.com/people/dj_paige> in
/Photoshop Lightroom/ - View the full discussion
<https://forums.adobe.com/message/6642924#6642924>

How are permissions applied between Web Applications and from Service Applications?

I'm quite confused about how permissions are applied to Content Databases in relation to service accounts. So, as an example, I have two web applications - Intranet whose service account is DOMAIN\sps_webapp_default - and My Sites whose service account is
DOMAIN\sps_webapp_social. The "sps_webapp_social" account has full control (through User Policy) to the Intranet web app.
When I go to My Sites> Sites> Suggested Links and click on any suggestions I get the below error and the site is not "followed". This Content Database sits under the Intranet web app which the sps_webapp_social has full control to.
I'm also getting similar permission issues when the account that runs various service applications tries to connect to the DB (such as workflow service). This is happening to new or migrated sites. I know permissions can be applied directly
in SQL but this can't be the way to do it?
Is there a simple reason why these permissions aren't propagating through?

I resolved my issue. I deleted the Work Management Service Application and created it again - this time, I made sure the IIS Pool (I created its own application pool) service account running this was the same as the My Site service account.
So, running under DOMAIN\sps_webapp_social. This seemed to clear up all of my permissions issues being thrown up in Event Viewer too.
My Sites really is a complicated beast... I'm getting there. Hopefully this helps somebody else!

Sharepoint 2013 Publish ContentHub Error Metadata web service application proxy Metadata Service Application Proxy.

I'm trying to republish the content hub but getting mms errors. I checked the coorlation id but make no sense of it. Any help would be appreciated.

Hi,
According to your post, my understanding is that you failed to republish the content hub.
I recommend to execute the following PowerShell command to add all permissions needed:
Initialize-SPResourceSecurity
In addition, you can create a new managed metadata service application and also a new application pool account to check whether it works.
More information:
Troubleshooting “The Managed Metadata Service or Connection is currently not available in SharePoint
2013”
Upgrade Managed Metadata Service App
Migrate Managed Metadata Service to SharePoint 2013 error
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Web controls 2.1 Fail with Specified Cast is not valid

1) I loaded the 2.1 Beta .NET Webcontrols ..2) I removed the reference to the old Plumtree.WCFilter.dll from my project3) I added the new reference in its place4) I checked the GAC to see that WCLoader was the proper version5) Also noticed the reliance on J# redist 1.1 so I downloaded and installed this as well6) Any thoughts on why I am gettig invalid cast exception? When I access portlet in the portal it simply displays error, when I try to access portlet outside of portal I get cast exception.
[InvalidCastException: Specified cast is not valid.] Com.Plumtree.Remote.Transformer.Config.WCConfig.Load(TextReader reader) Com.Plumtree.Remote.Transformer.Config.WCConfig.LoadAll(String confPath) Com.Plumtree.Remote.Transformer.PTTransformer.get_Config() Com.Plumtree.Remote.Transformer.PTTransformer.BeginRequestHandler(Object sender, EventArgs e) System.Web.SyncEventExecutionStep.System.Web.HttpApplication+IExecutionStep.Execute() +60 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +87
Phil Orion | [email protected] | www.orionsmith.com

I am still unable to get the 2.1 Webcontrols to work, can anyone provide some insight to overcoem the cast exception?.-There seem to be some additional configuration items in this release - Can anyone explain their purpose? -The installation also placed the image server files in the wrong location - I had to move them from the ptimages folder to the ptimages/RemoteGadgets

Cannot create new Service Application in Manage Service Applications in Central Administration

Hi!
I'm having problems with a new SharePoint 2013 Enterpise installation. The issue I'm having is is that if I navigate to Manage Service Applications and click on New I get nothing in the dropdown. If I use the wizard I can create new Service applications but
not through the Manage Service Applications page. Anyone know why? The button is not greyed out and I can click it but it doesn't show any service application at all (see picture).

Hi,
Based on your description, there is no service applications in the new dropdown list in SharePoint 2013.
Check things below:
Run the SharePoint products Configuration Wizard and then check if the same situation will occur.
Run Central Administration as administrator and then check the results.
According to your last post, it seems that there is something wrong about certificate.
How do you connect server through remote access? And check if it is the same situation when you create service application in SharePoint
server.
Best regards
Sara Fan
TechNet Community Support

"You can't open the application installer because PowerPc applications are no longer supportet."

Hi i am trying to install some software for my camera but i keep getting the above display. Plesa can someone help.

http://support.apple.com/kb/ht5371
If the camera is on here then when you plug it in just follow the on screen prompts to set up import of photos.

I get this error message when i try to download applications in india.Your account is not valid for use in the indian store.You must switch to the Emirati store before purchasing.

I had bought iphone from UAE and nw is using it in India but i cant download indian applications...Please help as i want indian applications always.

settings - app/itunes store - apple id - view apple id - log in - country/region - change to India.

Depuis la mise à jours de IOS7 sur mon Ipad, je n'arrive plus à faire de mises à jour de certain de mes applications et toujours sa affiche en anglais ce message [ Account not in this store. Your Account is not valid for us in the U.S store.... Aider moi

Salut,
Depuis la mise à jour de IOS7, je n'arrive plus à faire de mise à jours de certains de mes aplications!! Exemple: Facebook, Twiter et de mes jeux...
c'est le même message qui s'affiche en anglais [ Account not in this store. Your Account is not valid for us in the U.S store. You must switch to the french store before purchasing.] bref j'ai bien compris le message ( traduction)
Je veux juste que celà redevienne comme avant, qu'il fonctionne correctement.
Ah oui je ne suis pas calé en informatique et pire version Apple! Je ne connais que les bases!
merci de trouver une solution à mon problème.
From Tahiti - French Polynésia.

Hi Subarutuning,
If you are receiving an error when attempting to update your iPhone, use the steps in this article to troubleshoot -
Resolve iOS update and restore errors - Apple Support
Error (1) is associated with a hardware issue, but use these steps -
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
Thanks for using Apple Support Communities.
Best,
Brett L

MBAM 2.5 Web Applications installation - "Web service application pool account is not valid"

Similar Messages

Maybe you are looking for