MBAM Options for Non TPM Machines

Hi there,
We have just installed MBAM 2.5. We also have SCCM 2012 R2 in our environment. We are looking to use Bitlocker on around 500 laptops which are currently a mixture of Windows 7 and Windows 8.1 but with no TPM. (we should begin receiving TPM laptops from next
year).
Could someone please point me in the direction of what our options are both for Windows 7 and Windows 8.1 with no TPM as I am not clear on this.
Many thanks,
Jay

Hi,
for Windows 7 Computers and MBAM they must have a TPM to be managed for a windows 8 / 8.1 you can use MBAM on computers without TPM.
http://technet.microsoft.com/en-us/library/dn645378.aspx
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Similar Messages

Recovery key from MBAM for non TPM machines

Hi,
Since long time am trying to find answer about below query but unlucky , can some one guide me if this is feasiable or not?
1. I have non TPM Machines and want to use Bitlocker with MBAM.
2. if I will use the USB flash driver as start-up key during machine start-up than can we get the recovery key from MBAM (self service or helpdesk portal) if I lost the USB flash drive ?
Shailendra Dev

Hi,
For Windows 7 computers TPM is a requirement for Windows 8 / 8.1 it is not, so it depends in what client OS you want to manage.
See the documentation:
http://technet.microsoft.com/en-us/library/dn145046.aspx
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

MBAM 2.0 SP1 Deployment for Windows 8.1 Non TPM machine

Hi ,
how can I use MBAM (all features of MBAM 2.0 SP1) for Windows 8.1 Non TPM Machines ?
Can anyone share the step by step Deployment guide as i am new to MDOP and i have to use MBAM for Windows 8.1 Non TPM machines...
Shailendra Dev

Are you using the Password protector then or are you putting the keys on a USB stick? None of these scenarios are supported by MBAM but you can use at least BitLocker with the password protector to enable BitLocker and get the BitLocker status reported back
to MBAM. However, the other benefits of using MBAM will not be available, such as recovering the keys from the central location using the help desk or self service portal, if needed.
Is there a reason why you do not use BitLocker with TPM enabled machines? All corporate range of Machines have had TPM chips for many many years.
Blogging about Windows for IT pros at
www.theexperienceblog.com

HT2534 Why is there not an option for none because i dont have a credit card and there is no none button

Why is there not an option for none because i dont have a credit card and there is no none button

Create a new ID by following the steps in this article exactly as written: http://support.apple.com/kb/ht2534. Pay attention to step 3; you must first download and install any free app then create the ID.

Storage option for Non leaf level dimension members: Store vs Dynamic calc

Hi All,
What is the general rule regarding the storage options for non leaf level members? My understanding is that it should be Dynamic Calc under normal circumstances and have it as store if we are going to load data at non leaf level. Is this correct? Are there any other considerations while defining the members?
Thanks and Regards,
Amol

Don't forget to consider whether the dimension is sparse or dense. Upper level dynamic calcs generally work well on dense dimensions as long as you aren't entering data into upper level members. Upper level dynamic calcs in a sparse dimension CAN work well, but usually only on smaller dimensions. This really depends on what else you have going on in your cube. On large sparse dimensions, upper levels are almost always stored, but this is one of those areas where you can sometimes bend the rules.
Also, don't forget to consider the calc order implications of making something stored or dynamic.
- Jake

TS1646 When I click "view my account" there is no option for "none."

When I click "view my account" there is no option for "none." Can anyone help?

OK - skip that link....I just went through it again, and since you already have an Apple ID, it directs you to another article, which then directs you to the original one you were looking at.....so THAT's not going to work!
So, I'd say, at this point, you need to contact iTunes support to see if they can tell you why you are not seeing the "None" option...
Here's that link:
https://expresslane.apple.com/Issues.action
Sorry about any confusion I may have caused!
Cheers, and best of luck with this!
GB

HT2534 It doesn't give me an option for none under credit card options?

Trying to set up apple I'd without cc and it doesn't give option for none. Need help

You can create an iTune and App Store account without credit card details
1. Sign out of current Apple ID if you are sign-in to one (important)
2. Go to App Store and select a free app
3. Tap INSTALL APP
4. Create New Apple ID
5. Confirm Your Country
6. Agree with Terms and Conditions
7. Fill in your Apple ID and Password (you must create a new Apple ID; don't use your old Apple ID)
8. Create and answer your secret question
9. Select NONE for Payment Method
10. Fill in Billing Address
11. Submit application for new Apple ID
12. Wait for verification email
13. When email arrive, verify your account
14. Start downloading your free apps

Java.sql.Statement.setFetchSize(int) option for non-scrollable result sets

Hello!
Our tests indicate that fetch size option mentioned makes visible difference in performance for non-scrollable result sets also. In the same time, it seems there is no way to set this option for such result sets at TopLink level, and default fetch size is always used instead.
Can somebody propose a solution for this, I mean a way to specify custom fetch size (for results without any scrolling)?
Thanks,
Sergey

To set the JDBC fetch size for a query, use the following APIs:
int desiredFetchSize = 500;
ReadAllQuery query = new ReadAllQuery(YourClass.class);
CallQueryMechanism queryMechanism =
(CallQueryMechanism) query.getQueryMechanism();
DatabaseCall call = queryMechanism.getCall();
call.setResultSetFetchSize(desiredFetchSize);
If you wish to set the fetch size for all queries, consider using named queries for all queries (see the TopLink documentation for more information on named queries), and then configure them on startup.
Information taking from Metalink Note:237093.1

Direct Access for Non Domain Machines

Hi,
In My IT-infra, there is multiple machines that is out my Office network & Domain..
Can we join these machines in domain via Direct Access implementation ? or for implementing Direct Access we required to join those non domain & out of office network machine to Domain first ?
secondly, can we implement the Direct access without any public certificate purchase, and without any IPV6 configuring in internal network,machines and in servers .currently i am using IPv4 IP on all Machines & Servers.
I have gone through the Direct Access Technet guide but i feel very complex document there ...can you please brief me about direct access implementation in simpale way, i want to implement direct access to join the internet based client machines to
domain and manage via/for SCCM ...
Shailendra Dev

Correct, DirectAccess clients must be domain joined. Also, only Windows 7 Ultimate, Windows 7 Enterprise, or Windows 8 Enterprise clients are able to be DirectAccess connected, so that may also make a difference to your situation. I see many customers deploy
DirectAccess for those Win7/Win8 domain-joined systems, and then make use of the traditional (RRAS) VPN on the same DirectAccess server for connecting any other operating systems or non-domain-joined machines. Those would just have to launch a manual VPN connection,
where the DirectAccess connections are of course automatically connected.
You don't "have" to use an SSL certificate that you purchased from a public CA, but you really should. It is definitely a best practice to use a trusted public certificate on your DirectAccess server. Further, if you have Windows 8 client computers,
you don't even need to distribute the machine certificates inside your network, but it is also a best practice that you do this anyway, to strengthen the authentication process.
No, you do not need IPv6 inside your network at all for DirectAccess to work.
Sounds like you might be interested in some additional reading on DA, here are the two books available on the subject:
https://www.packtpub.com/virtualization-and-cloud/microsoft-directaccess-best-practices-and-troubleshooting
https://www.packtpub.com/networking-and-servers/windows-server-2012-unified-remote-access-planning-and-deployment

HT2534 There is no option for "none" payment method anymore?

see the title, I need to download xcode but don't have a credit card, how do I do it?

Peter, I had the same problems! I could set up my account for iTunes without a card by doing the following:
- open iTunes
- Sign In
- Get the message saying that the account must be reviewed for iTunes
- click Review
- Ok the Use Terms
- on the screen where you see your username, password, security questions, there are two check boxes at the bottom for receiving emails from Apple (marketing stuff). I was always deselecting these, but one time i just left them checked and clicked Continue
- after leaving them checked, i then saw the NONE option next to PayPal.
I did this with my existing account. I tried creating a new account, but if I deselected those two options, i didn't see NONE even with the completely new account.
Hope that helps you! It was a bugger for me too!

When I go to Apple ID my account is accessible but when I go to App Store I have to review my account and there's no option for 'NONE' credit card users. Why is that? How can I start??

HELP

Either enter a credit card or
Create a NEW account/ID for her using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before. Make sure you specify a birthdate that results in being at least 13 years old
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
More details of how:
http://ipadhelp.com/ipad-help-tips-tricks/how-to-get-free-apps-from-the-app-stor e-without-a-credit-card/

How do I use my backup drive for non-Time Machine stuff?

I haven't set up Time Machine yet because it wants me to completely format my external hard drive, and it seems to want to use it for TM backups exclusively?
However, I would also like to use it to store stuff that I don't want to keep on my computer, eg tons of photos, videos, stuff from my sister's computer, etc.
Is there a way to do Time Machine but also use the external hard drive for storage? I don't mind temporarily copying the photos etc that are on there to my computer while I format, so that's not the issue. I just don't want my EHD rendered completely useless to everything else.
Thanks

DevonC wrote:
I haven't set up Time Machine yet because it wants me to completely format my external hard drive, and it seems to want to use it for TM backups exclusively?
However, I would also like to use it to store stuff that I don't want to keep on my computer, eg tons of photos, videos, stuff from my sister's computer, etc.
Is there a way to do Time Machine but also use the external hard drive for storage? I don't mind temporarily copying the photos etc that are on there to my computer while I format, so that's not the issue. I just don't want my EHD rendered completely useless to everything else.
Thanks!!!
There are several ways to do exactly this.
If you partition the external drive, you can use one partition for TM and the other for anything else.
Even if you do not partition the drive, you can safely store other data in folders on the drive. Just to not use the folder that TM creates for anything. And it's best not to put files directly on the drive, in my opinion, but use folders for storage.
Just remember that whatever you put on the drive takes up room from TM and when the drive gets nearly full, TM will start automatically deleting older files from it's own folder.
I have my Tiger clone on my external TM drive in a separate partition and everything works fine.

HT2534 im filling in the payment forn from itunes on the computer but t doesnt have a option for 'none'.

I'm filling in the payment and billing form but it doesnt have the option 'none'.
Im doing it on the computer

Creating an iTunes Store, App Store, iBooks Store, and Mac App Store account without a credit card

Options for non-Fireware captures

I have a Canon UH-1 camera that connections to Final Cut Studio via Firewire. The UH-1 is a tape-based camera. What do I need to capture video if I don't have Firewire? The newer Macs don't have a Firewire 400-800 options.

Yes, you are able to do so. Sorry, it took a while to find all the cables (and the power adaptor for my HV30).
Anyway here is my MacBook Air digitizing HDV from a Canon HV30: Thunderbolt port > Thunderbolt adaptor connected to FW 800 to FW 400 cable > connected to old Seagate FW drive (to let me connect to the next cable) > connected to a FW 400 6 pin to FW 4 pin cable > connected to the HV 30. Success!
Here is the mess in action:
MtD

When I try to edit my payment on my iTunes account to none there is no option for none.

Every time I try to download something it makes me re enter my iTunes account. Now I am so sick of it I am looking to get rid if that option of even having a credit card on my account. But, there is no option to take it off. Any other way? There is no none option.

Hi Rose2135,
If you are having issues removing your billing info from your iTunes Store account, you may find the following page helpful:
Apple Support: Why can’t I select None when I edit my payment information?
http://support.apple.com/kb/TS5366
Regards,
- Brenden

MBAM Options for Non TPM Machines

Similar Messages

Maybe you are looking for