MBAM - SCCM 2012 Reports - Error: the 'MBAM Policy' view does not exist

Hi
I have installed MBAM with SCCM 2012 integration. A single server install with SQL server 2012. Mostly it has gone smoothly and laptops are being encrypted and pins stored and recoverable. The problem I have is reports are not showing. I get the following
error message.
"Error: the 'MBAM Policy' view does not exist"
Any ideas why this is? I get the same error message with all 4 reports.

Hi Slycy,
There is another thread that seems to be a similar issue
here that may help you. The last post in particular has a number of steps that you can use to speed up creation of the views:
Just for future reference, there are quite a few things that have to happen before the view is created. This is merely how CM works.
Make MBAM MOF changes
Select TPM spec version in hardware inventory
Install MBAM CM Integration feature
Perform a machine policy refresh cycle on a client to get the MOF changes that need to be inventoried
Perform hardware inventory
Update MBAM Supported Computers collection membership. The machine should appear if it meets the criteria
Run another machine policy refresh on the client so that the Configuration Baseline will come down
Make sure that the MBAM agent has woken up once
Evaluate the Configuration Baseline
The MBAM views should be created now.
You don't have to do this for every machine, but this is the process to speed it up. If you let CM do it, it could take over a week before the view is created the first time, depending on when Hardware inventory runs, etc.
Hope this helps,
David

Similar Messages

Error 'The location you entered does not exist or is flagged as inactive.'

Hi
In iRecruitment, when Employee Candidate applies for any job, we are getting the error 'The location you entered does not exist or is flagged as inactive.' And it stops employee from applying to any jobs. We are in 11.5.10.2 version.
Appreciate any pointers on the same.
Thanks
Alagappan
Edited by: user5733015 on Dec 19, 2009 8:35 PM

Hi Hussein
Thanks for the update.
I have gone through all those notes. But, the issue we face here seems to be a peculiar one. First of all, it happens while applying for job (iRecruitment Self Service) and not while creating a contingent worker or creating an employee in the form, as given in the notes.
Moreover, We haven't had this error either in development nor in test instance. It happened only when we migrated the setups to Production. Moreover, the test and development are nothing but the clone of production at various time intervals. We have tested this on the very latest clone of production (that happened on 15th november) and verified that it doesn't popup there.
Can you give me some insights 'What could be the actual problem'?
Considering the solution given in the notes, it talks about 'Setting the default work location for the business group'? Where to set this up?
Appreciate all your help.
Thanks
Alagappan

Invoice created via SUS having error -The template item 1 does not exists

Hi All,
We are in SRM6.0 and in our PRD system, we have few invoices created through SUS showing error "The template item 1 does not exist.
These invoices went into "To be corrected" status and when I hit check it gives me above error message. The message itself don't make much sense to me. Please note we can create new invoice in SRM manually and everything works fine.
Appreciate any pointers.
Thanks, Sachin

We have analysed the issue and found we are getting this error because these invoices are missing with "BE_LOG_SYSTEM" field in table BBP_PDBEI and "BE_REFOBJ_TYPE" field is showing "BUS2201 instead of "BUS2012".
Any feedback why we have these difference as compare to good invoices (created directly in SRM).
Thanks, Sachin

ORA-00942: the table or view does not exist

Hello!!!!
I have tree simple mappings each one with only one dimention and sometimes external or normal tables. One of them is ok but I can´t deploy the others.
In Controle Center I have this messege: the table or view does not exist.
I genereted both queries and run in SQL navigator with the same message.
I realized that I can set the schema properties for external tables but I couldn´t do the same for Dimension (or I don´t know where I can do this).
I believe that I have to set this propertie for dimension to have my mapping running ok, but I realized that the only one mapping that is ok does not have this propertie set.
Where is the problem?!!?!?!?
I validated these mapping and they have warnnings about column length, no errors.
In the previous OWB version I used to set this propertie, but in 10.2 I don´t know if is realy necessary.

Try to open the package body with a tool like TOAD and try to compile it. When you use TOAD the process stops where the error is. Then you know which table or view doesn't exist for the OWB. If the table or view does exist then it is almost certainly a missing privilege that prevents you from succesfully deploying your mapping. If the table or view does not exist then you've got to deploy the underlying (bound) table.
Regards,
Jörg

Why the x$bh view does not exist?

Why the x$bh view does not exist?
SQL> select*from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
PL/SQL Release 11.1.0.6.0 - Production
CORE    11.1.0.6.0      Production
TNS for 32-bit Windows: Version 11.1.0.6.0 - Production
NLSRTL Version 11.1.0.6.0 - Production
SQL> conn system/oracle
Connected.
SQL> desc X$BH;
ERROR:
ORA-04043: object X$BH does not exist

SQL> desc x$bh
Name                            Null?    Type
ADDR                                  RAW(4)
INDX                                  NUMBER
INST_ID                             NUMBER
HLADDR                              RAW(4)
BLSIZ                                  NUMBER
NXT_HASH                             RAW(4)
PRV_HASH                             RAW(4)
NXT_REPL                             RAW(4)
PRV_REPL                             RAW(4)
FLAG                                  NUMBER
RFLAG                                  NUMBER
SFLAG                                  NUMBER
LRU_FLAG                             NUMBER
TS#                                  NUMBER
FILE#                                  NUMBER
DBARFIL                             NUMBER
DBABLK                              NUMBER
CLASS                                  NUMBER
STATE                                  NUMBER
MODE_HELD                             NUMBER
CHANGES                             NUMBER
CSTATE                              NUMBER
LE_ADDR                             RAW(4)
DIRTY_QUEUE                             NUMBER
SET_DS                              RAW(4)
OBJ                                  NUMBER
BA                                  RAW(4)
CR_SCN_BAS                             NUMBER
CR_SCN_WRP                             NUMBER
CR_XID_USN                             NUMBER
CR_XID_SLT                             NUMBER
CR_XID_SQN                             NUMBER
CR_UBA_FIL                             NUMBER
CR_UBA_BLK                             NUMBER
CR_UBA_SEQ                             NUMBER
CR_UBA_REC                             NUMBER
CR_SFL                              NUMBER
CR_CLS_BAS                             NUMBER
CR_CLS_WRP                             NUMBER
LRBA_SEQ                             NUMBER
LRBA_BNO                             NUMBER
HSCN_BAS                             NUMBER
HSCN_WRP                             NUMBER
HSUB_SCN                             NUMBER
US_NXT                              RAW(4)
US_PRV                              RAW(4)
WA_NXT                              RAW(4)
WA_PRV                              RAW(4)
TCH                                  NUMBER
TIM                                  NUMBERwrong USER

Cannot optimize volume - Receive error "The specified extrinsic Method does not exist"

When I try to optimize a volume on a server running Windows Server 2012 (R1). I receive the below error. This volume is an ISCSI target to our Compellent SAN. Other Servers don't have an issue with volumes created on the same SAN and I have already ran ChkDsk
and it returned no errors. Oddly enough I can run a "Defrag T: /D" but a "Defrag T: /O" returns
"Incorrect Function. (0x80070001)" (Incidentally an "Optimze-Volume T -Defrag" also works)
Any Ideas? I'm stumped!
Command:
Optimize-Volume -DriveLetter T -Verbose
Error:
VERBOSE: Invoking slab consolidation on iSCSI_SAN01_ExchLogFiles (T:)...
VERBOSE: Slab Analysis: 100% complete.
optimize-volume : The specified extrinsic Method does not exist.
At line:1 char:1
+ optimize-volume -DriveLetter T -Verbose
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : MetadataError: (MSFT_Volume (Ob...2-a802-ba7e...):ROOT/Microsoft/...age/MSFT_Volume) [Optimize-Volume], CimException
+ FullyQualifiedErrorId : MI RESULT 17,Optimize-Volume

I did stumble upon that article as well and working through it didn't help. This is an Exchange 2013 server but I wouldn't think that that would exclusively cause a problem like this (unless there is something under the hood that Exchange 2013 is secretly
doing). The C drive is for the OS, the M drive is for the Exchange DB, and the
T drive is for the Logs. The C drive is "directly" connected and the M and T drives are on the same SAN (different LUNs) via iSCSI. This is running as a virtual guest on VMWare ESXi v5.5. I have other servers setup the
same way (not Exchange servers though) with drives on the iSCSI SAN and there are no issues when I run those Optimize-Volume commands. Here is some more output from the console:
PS C:\Users\administrator> Optimize-Volume -DriveLetter T -Analyze -Verbose
VERBOSE: Invoking slab consolidation on iSCSI_SAN01_ExchLogFiles (T:)...
VERBOSE: Slab Analysis: 0% complete...
Optimize-Volume : The specified extrinsic Method does not exist.
At line:1 char:1
+ Optimize-Volume -DriveLetter T -Analyze -Verbose
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : MetadataError: (MSFT_Volume (Ob...2-a802-ba7e...):ROOT/Microsoft/...age/MSFT_Volume) [Optimize-Volume], CimException
+ FullyQualifiedErrorId : MI RESULT 17,Optimize-Volume
PS C:\Users\administrator> Optimize-Volume -DriveLetter M -Analyze -Verbose
VERBOSE: Invoking slab consolidation on iSCSI_SAN01_ExchMailStoreDB (M:)...
VERBOSE: Slab Analysis: 0% complete...
Optimize-Volume : The specified extrinsic Method does not exist.
At line:1 char:1
+ Optimize-Volume -DriveLetter M -Analyze -Verbose
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : MetadataError: (MSFT_Volume (Ob...2-93f1-0050...):ROOT/Microsoft/...age/MSFT_Volume) [Optimize-Volume], CimException
+ FullyQualifiedErrorId : MI RESULT 17,Optimize-Volume
PS C:\Users\administrator> Optimize-Volume -DriveLetter C -Analyze -Verbose
VERBOSE: Invoking analysis on (C:)...
VERBOSE: Analysis: 0% complete...
VERBOSE: Analysis: 22% complete...
# ... Repeated ...
VERBOSE: Analysis: 94% complete...
VERBOSE: Analysis: 99% complete...
VERBOSE: Analysis: 100% complete...
VERBOSE: Analysis: 100% complete.
VERBOSE:
Post Defragmentation Report:
VERBOSE:
Volume Information:
VERBOSE: Volume size = 84.48 GB
VERBOSE: Cluster size = 4 KB
VERBOSE: Used space = 63.18 GB
VERBOSE: Free space = 21.29 GB
VERBOSE:
Fragmentation:
VERBOSE: Total fragmented space = 4%
VERBOSE: Average fragments per file = 1.23
VERBOSE: Movable files and folders = 153593
VERBOSE: Unmovable files and folders = 6
VERBOSE:
Files:
VERBOSE: Fragmented files = 2745
VERBOSE: Total file fragments = 35394
VERBOSE:
Folders:
VERBOSE: Total folders = 4819
VERBOSE: Fragmented folders = 2
VERBOSE: Total folder fragments = 2
VERBOSE:
Free space:
VERBOSE: Free space count = 74005
VERBOSE: Average free space size = 296.00 KB
VERBOSE: Largest free space size = 409.42 MB
VERBOSE:
Master File Table (MFT):
VERBOSE: MFT size = 308.00 MB
VERBOSE: MFT record count = 315391
VERBOSE: MFT usage = 100%
VERBOSE: Total MFT fragments = 4
VERBOSE: Note: File fragments larger than 64MB are not included in the fragmentation statistics.
VERBOSE:
You do not need to defragment this volume.

RDS Gateway + Smart Card Error [ The specified user name does not exist.]

I have the following Windows Server 2008 R2 servers:
addsdc.contoso.com, AD DS Domain Controller for contoso.com
adcsca.contoso.com, AD CS Enterprise CA, CDPs/AIAs published externally.
fileserver.contoso.com, RDS Session Host for Administration enabled
rdsgateway.contoso.com, RDS Gateway enabled
tmgserver.contoso.com, 'Publishing' rdsgateway.contoso.com but with pass-through authentication
And the following Windows 7 PCs:
internalclient.contoso.com
externalclient.fabrikam.com
There's no trust between the domains, the external client is completely separate on the internet but the CA certificate for contoso.com has been installed in the trusted Root CA store. All servers have certificates for secure RDP.
I enrolled for a custom 'Smart Card Authentication' certificate with Client Authentication and Smart Card Logon EKUs from the CA, stored on my new Gemalto smart card using the Microsoft Base Smart Card CSP.
From internalclient.contoso.com, I can RDP to fileserver.contoso.com
using the smart card just fine with no certificate errors.
From externalclient.fabrikam.com, I can RDP to fileserver.contoso.com
via rdsgateway.contoso.com using a username and password just fine with no certificate errors.
From externalclient.fabrikam.com, I can RDP to fileserver.contoso.com
via rdsgateway.contoso.com using the smart card to authenticate to the gateway, and a username and password to authenticate to the end server, just fine.
BUT from when using a smart card to authenticate to the end server via the gateway, it fails with:
The specified user name does not exist. Verify the username and try logging in again. If the problem continues, contact your system administrator or technical support.
When I move the client into the internal network and try the connection again (still via the RDS Gateway), it works fine - the only thing I can think of is being outside the network and not being able to contact the AD DS DC for Kerberos is causing the issue
- but I'm pretty sure this is a supported scenario?
The smart card works fine internally, the subject of the certificate is the user's common name (John Smith) and the only SAN is
[email protected] which matches the UPN of the user account as it was auto-enrolled.
Does anyone have any ideas?

I had a similar issue where I am using a smart card through a Remote Desktop Gateway. I had to disable Network Level Authentication (NLA) on the destination Remote Desktop Server. If anyone has another way around this, I'd appreciate hearing it. I'd prefer
to use NLA.

Windows 8 Remote Desktop Error "The Requested Security Package Does Not Exist"

When my remote host (win server 2008 R2) is configured to use SSL for security layer, RDP from my Windows 8 gets
"An authentication error has occurred. The requested security package does not exit."
When the host is set to use RDP security layer, it works fine.
Registry key solution for Win7 suggested on other posts does not seem to apply to win8.
This is a Lenovo desktop, I uninstalled silverlight and bunch of other OEM installed programs.

This fixed my problem in Windows 8 while connecting to a Windows 7 host. I needed the pku2u entry. I decided to look it up and here's the info for anyone that's interested.
Introducing PKU2U in Windows
Applies To: Windows 7, Windows Server 2008 R2
This product evaluation topic for the IT professional describes the Public Key Cryptography Based User-to-User (PKU2U) security support provider (SSP) that is new in Windows 7 and Windows Server 2008 R2.
PKU2U protocol
The PKU2U protocol in Windows 7 and Windows Server 2008 R2 is implemented as an SSP. The SSP enables peer-to-peer authentication, particularly through the Windows 7 media and file sharing feature called Homegroup, which permits sharing
between computers that are not members of a domain.
How PKU2U works
Windows 7 and Windows Server 2008 R2 introduce an extension to the Negotiate authentication package, Spnego.dll. In previous versions of Windows, Negotiate decides whether to use Kerberos or NTLM for authentication. The extension SSP for Negotiate,
Negoexts, which is treated as an authentication protocol by Windows, supports Microsoft SSPs including PKU2U. You can also develop or add other SSPs.
When computers are configured to accept authentication requests by using online IDs, Negoexts.dll calls the PKU2U SSP on the computer that is used to log on. The PKU2U SSP obtains a local certificate and exchanges the policy between the peer computers. When
validated on the peer computer, the certificate within the metadata is sent to the logon peer for validation and associates the user's certificate to a security token and the logon process completes.
For more information about developing SSPs, see
Custom Security Packages in the MSDN Library.
For more information about the Negotiate extensions (Negoexts), see
Introducing Extensions to the Negotiate Authentication Package.

Setting up a PDC: error-"The specified domain either does not exist or.....

**** Everyone...
Please, would someone give me some help to resolve the error (WIN7):
"The specified domain does not exist or could not be contacted."
I have Open Directory, DNS and SMB running. No errors are present.
Any info I can give to help solve,please ask.
Thank you.

Sorry, that problem is not an DNS problem but an SMB 3.0.28a (version used in SLS 10.6.1) problem in conjunction with Windwos 7. It is well know that Samba versions before 3.3.4 won´t work with Windows 7, see http://ggts.net/2009/05/17/joining-a-windows-7-system-to-a-samba-domain/ and https://bugzilla.samba.org/show_bug.cgi?id=6680
You can to some easy command-line test on the Win7 client, e.g. nltest dctest:<domainname> and you will see that domain and pdc are properly resolved but the client can not be added due to password bugs.
It´s time for now Apple to move on to a more recent version of samba, version 3.0.28a is 20 months old!!!
Right now, OS X Server 10.6.1 with OD/SMB as PDC is not usable with Windows 7 clients right now! Since this bug is known since 2 months and fixed 5 days later it´s quite impressing how Apple looks after their customers!

Error: the 'MBAM Policy' view does not exist.

MBAM 2.0 SP1 with SCCM 2012 integration:
I am receiving this error when the reports are run from the reporting services point and from inside of the SCCM console. The view that the reports are testing for does exist in the SCCM database. I do not understand why the reports are giving this error.
Each of these MBAM reports have a test for the view V_GS_MABM_POLICY :
    DECLARE @query nvarchar(70)
          SET @query = N'SELECT COUNT(EncodedComputerName0) AS Status FROM V_GS_MBAM_POLICY'
    BEGIN TRY
      EXEC(@query)
    END TRY
    BEGIN CATCH
      SELECT 0 AS Status
    END CATCH
If the Try fails then you receive the above error message in Red Font.
This view - V_GS_MBAM_POLICY does exist so I am not sure why this is occurring. I have completely redone the MBAM setup on the SCCM 2012 server after removing all the MBAM collection and reports, etc. following the instructions from this article -
http://support.microsoft.com/kb/2831166 I also removed the classes. I ran the setup again - just the SCCM integration feature and it gives me the same results. Some have suggested that the inventory has
to be collected by the clients first before these reports work and that doesn't appear to be the case. This red font error message is only shown if the view is not reachable. Anyone have any ideas?

I was mistaken, the view is queried for a count and if 0, it displays that error message. So it may be correct that this is normal until the first clients return data that populates the MBAM/Bitlocker tables.

Error: table or view does not exist

Hi,
I created a procedure where it inserts records from other table (different machine/database). when I execute it, the error was Table or View does not exist+. It seems that it cannot access the table from the other machine/database.
here is my code..
insert into <%=odiRef.getSchemaName("*LGL_TGT_DWH_MAIN*", "D")%>.TEMPX_ACCOUNT
     ACCOUNT_NUMBER     ,
     TELEPHONE     ,
     ADDRESS
select
TBL_ACCNT.ACCOUNT_NUMBER ,
TBL_EMP.TELEPHONE ,
TBL_EMP.ADDRESS
from
<%=odiRef.getSchemaName("*LGL_TGT_DWH_OTH*", "D")%>.TBL_EMP TBL_EMP ,
( select *
from <%=odiRef.getSchemaName("*LGL_TGT_DWH_MAIN*", "D")%>.TBL_ACCNT
where PHONE_NUMBER > 0
) TBL_ACCNT
where TBL_ACCNT.PHONE_NUMBER = TBL_EMP.TELEPHONE
Do I need to create a grant or something to access the table from the other machine?
Help me please...
TIA.. :)

hi,
the code I posted above was from the procedure I created in Designer. here is the code in the Operator after I run it..
insert into OBI_DEV.TEMPX_ACCOUNT
ACCOUNT_NUMBER ,
TELEPHONE ,
ADDRESS
select
TBL_ACCNT.ACCOUNT_NUMBER ,
TBL_EMP.TELEPHONE ,
TBL_EMP.ADDRESS
from
DB1_DEV.TBL_EMP TBL_EMP ,
( select *
from OBI_DEV.TBL_ACCNT
where PHONE_NUMBER > 0
) TBL_ACCNT
where TBL_ACCNT.PHONE_NUMBER = TBL_EMP.TELEPHONE
here is the error/message in Execution Tab in Operator
942 : 42000 : java.sql.SQLException: ORA-00942: table or view does not exist
java.sql.SQLException: ORA-00942: table or view does not exist
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
     at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
     at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:633)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1086)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3057)
     at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execStdOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlS.treatTaskTrt(SnpSessTaskSqlS.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.h.y(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Thread.java:534)
thanks :)

The company code 123 does not exist or has not been fully maintained

hi...
frnds..
Error: The company code 123 does not exist or has not been fully maintained..
While creating material master, am getting this error... how to resolve this...
Thanks in advance...
Raghav.KH

Hi,
Check in OX02 whether the city, country, currency and language are maintained and in OX16 it is assigned to company.
If your company code does not exist create new entries by giving an ID and description and fill the above particulars and
assign to the company.
Regards,
Sadashivan

SCCM 2012 R2 reporting error: "The DefaultValue expression for the report parameter 'UserTokenSIDs' contains an error: A specified logon session does not exist. It may already have been terminated. (rsRuntimeErrorInExpression)"

Hi,
I have two SCCM environments under same active directory domain and one service account have been used for SCCM configurations on both the environments (QA and PRODUCTION). I am facing similar error as mentioned above while trying to fetch reports on
PRODUCTION site, but the QA site is working fine, though same service account have been used for configuring both. While looking at the reportserverservice_<date> log on my Production DB server i see the following error
"processing!ReportServer_0-3!2124!01/02/2015-09:09:30:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: , Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during
report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot read the next data row for the dataset DataSet1. ---> System.Data.SqlClient.SqlException: Conversion failed when converting the nvarchar value 'Override
Default' to data type int."
My DB and SCCM primary site are different and the reorting services point is installed on remote DB server. Please help me resolving the issue.
Troubleshooting performed:
1.Disabled the registry key 'EnableRbacReporting' from HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\SRSRP to 0 and then restarted SSRS service and the reporting worked for some minutes after that the registry key reverted back to 1 automatically and
reporting started throwing errors again.
2. Checked with the permissions on DB whether or not 'sysadmin' role is assigned to the SCCM service account.
3. re-registered the SQL management Provider WMI class.
mofcomp.exe “C:\Program Files (x86)\Microsoft SQL Server\110\Shared\sqlmgmproviderxpsp2up.mof”

Hi All,
Finally found exact solution to the reporting error.
Error: while launching SCCM reports (both from Console and web based) an unexpected error occured with error message as "The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist.
It may already have been terminated. (rsRuntimeErrorInExpression)"
Solution: This is password replication issue for the domain account used to configure reporting services point in SCCM. If your SQL SSRS reporting services instance and databse runs with local default account whereas the reporting services point on SCCM
primary site is configured with domain account, (As in My case) you need to perform the following in order to get rid of the error.
Launch 'Reporting Services Configuration Manager' from the SQL SSRS box(either Local or Remote), Connect to Report Server Instance->Go to 'Execution Account' tab->Specify the 'Execution Account' as domain account and password which is used to configure
Reporting Services Point in SCCM Primary Site, and then click apply.
Now Lauch the report either way (Web based or from Console), the error will disappear and all your default reports will execute perfectly as before.

The specified domain either does not exist or could not be contacted when logging in through RDP. Server 2012/SBS 2007

I have a server 2012 machine running RDP and a PDC running SBS 2007. Every once a while all my users get an error saying "The specified domain either does not exist or could not be contacted". After waiting ~5-10 minutes the issue resolves itself.
I believe it has something to do with the syncing between the two but am not 100% sure. Anyone know a fix or what I should look at?
Jerry T

Hi Jerry,
Thank you for posting in Windows Server Forum.
After referring to your error, it seems to have DNS issue in your case which can’t locate the DC. Please check the setting related to DNS issue as following. (Below quoted from
this thread)
If this is the case, I would recommend proceeding like that:
1. Make sure that each DC has only one IP address in use and ONLY one NIC card enabled (Other NICs should be disabled)
2. Make sure that public DNS servers are configured as DNS forwarders and not in IP settings of DCs
3. Choose a healthy DC / DNS server and make each DC point to it as primary DNS server
4. Make each DC / DNS server point to its private IP address as secondary DNS server
5. Make sure that needed ports for AD replication are opened: http://technet.microsoft.com/en-us/library/bb727063.aspx
6. Check your DNS zones and remove manually all obsolete / unused DNS records for DCs
Once done, run ipconfig /registerdns and restart netlogon on each DC you have.
On the client computer, run ipconfig /flushdns and check again.
Hope it helps!
Thanks.
Dharmesh Solanki

Error in CMC : The 0 plug-in does not exist in the CMS (FWM 02017)

Hello,
We have just installed a BO4 environment and migrated our legacy XIR2 environment (users, groups, universe, reports....).
I want now to modify some user/group securities on a folder. When I press the Assign Security button, the following error is displayed : The 0 plug-in does not exist in the CMS (FWM 02017)
Does anybody know about this problem ?
Thank you.

Hello,
It was good practice to redo the security when migrating from XIR2 to XI3.1.
So if you migrate from XIR2 to BI4, I think it might be a good idea to do it also.
Try first to see if you have the same issue by recreating a new group.
If it works fine, then you should use this new one.
Regards,
Philippe

MBAM - SCCM 2012 Reports - Error: the 'MBAM Policy' view does not exist

Similar Messages

Maybe you are looking for