MBean not found error while creating Resource Adapter

Hi,
During the post installation configuration of Oracle Identity Manager, I had to create Resource Adapter as mentioned in the steps below. In the final step, when I click OK, I’m getting an error message “An error has occurred. MBean not found” (I had created a new oc4j container called oc4j_oim under which this is being done). Complete error message displayed is pasted at the end fyi. Kindly suggest a workaround for this issue.
Steps followed:
Create the required Resource Adapter in Oracle Application Server as follows:
a) Log on to the Application Server Control.
b) From the View By list, select Application Servers.
c) Click the server instance.
d) On the page that is displayed, click Administration.
e) Click Enterprise Messaging, and then click Database Persistence. The JMS connectors for
the Oracle Application Server instance that are currently configured for use with database
persistence JMS providers are listed.
f) Click Deploy.
g) In the Resource Adapter Module Name field, enter oimOJMSRA
h) Select Add a new resource provider to be used by this connector.
i) In the Resource Provider Name field, enter oimOJMSRP
j) From the Datasource JNDI Location list, select jdbc/xlXADS.
k) Click OK.
Detailed Error Message:
oracle.sysman.ias.studio.sdk.IASRuntimeException: MBean not found at oracle.sysman.ias.studio.sdk.SDKJMXUtil.queryName(SDKJMXUtil.java:141) at oracle.sysman.ias.studio.oc4j.jms.JMXDeployDbProviderAdminBean.deployDBProviderAndConfigure(JMXDeployDbProviderAdminBean.java:173) at oracle.sysman.ias.studio.oc4j.jms.DeployDbProviderHelper.deployDBProvider(DeployDbProviderHelper.java:242) at oracle.sysman.ias.studio.oc4j.jms.DeployDbProviderHelper.handleEvent(DeployDbProviderHelper.java:127) at oracle.sysman.ias.studio.sdk.AbstractController.handleEvent(AbstractController.java:769) at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:378) at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:765) at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:283) at oracle.sysman.ias.studio.app.StudioConsole.doGet(StudioConsole.java:385) at oracle.cabo.servlet.UIXServlet.doPost(Unknown Source) at javax.servlet.http.HttpServlet.service(HttpServlet.java:763) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65) at oracle.sysman.ias.studio.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.java:75) at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15) at oracle.sysman.ias.studio.app.MultipleJVMFilter.doFilter(MultipleJVMFilter.java:85) at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17) at oracle.sysman.ias.studio.app.PostLogonFilter.doFilter(PostLogonFilter.java:80) at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17) at oracle.sysman.ias.studio.app.ShortHostnameRedirectFilter.doFilter(ShortHostnameRedirectFilter.java:68) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370) at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453) at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302) at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:595)
S/W Details:
Application Server 10.1.3.3.0
Identity Manager 9.1.0.1
Regards,
CC

Hi Srinivas,
Please check ULS log for more useful information when this error occurs.
Please also check if this issue could be reprodued in other libraries, if not, you can use the new library instead.
Thanks
Daniel Yang
TechNet Community Support

Similar Messages

Mbean Error While Creating Resource Adapter

Hi,
During the post installation configuration of Oracle Identity Manager, I had to create Resource Adapter as mentioned in the steps below. In the final step, when I click OK, I’m getting an error message “An error has occurred. MBean not found” (I had created a new oc4j container called oc4j_oim under which this is being done). Complete error message displayed is pasted at the end fyi. Kindly suggest a workaround for this issue.
Steps followed:
Create the required Resource Adapter in Oracle Application Server as follows:
a) Log on to the Application Server Control.
b) From the View By list, select Application Servers.
c) Click the server instance.
d) On the page that is displayed, click Administration.
e) Click Enterprise Messaging, and then click Database Persistence. The JMS connectors for
the Oracle Application Server instance that are currently configured for use with database
persistence JMS providers are listed.
f) Click Deploy.
g) In the Resource Adapter Module Name field, enter oimOJMSRA
h) Select Add a new resource provider to be used by this connector.
i) In the Resource Provider Name field, enter oimOJMSRP
j) From the Datasource JNDI Location list, select jdbc/xlXADS.
k) Click OK.
Detailed Error Message:
oracle.sysman.ias.studio.sdk.IASRuntimeException: MBean not found at oracle.sysman.ias.studio.sdk.SDKJMXUtil.queryName(SDKJMXUtil.java:141) at oracle.sysman.ias.studio.oc4j.jms.JMXDeployDbProviderAdminBean.deployDBProviderAndConfigure(JMXDeployDbProviderAdminBean.java:173) at oracle.sysman.ias.studio.oc4j.jms.DeployDbProviderHelper.deployDBProvider(DeployDbProviderHelper.java:242) at oracle.sysman.ias.studio.oc4j.jms.DeployDbProviderHelper.handleEvent(DeployDbProviderHelper.java:127) at oracle.sysman.ias.studio.sdk.AbstractController.handleEvent(AbstractController.java:769) at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:378) at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:765) at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:283) at oracle.sysman.ias.studio.app.StudioConsole.doGet(StudioConsole.java:385) at oracle.cabo.servlet.UIXServlet.doPost(Unknown Source) at javax.servlet.http.HttpServlet.service(HttpServlet.java:763) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65) at oracle.sysman.ias.studio.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.java:75) at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15) at oracle.sysman.ias.studio.app.MultipleJVMFilter.doFilter(MultipleJVMFilter.java:85) at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17) at oracle.sysman.ias.studio.app.PostLogonFilter.doFilter(PostLogonFilter.java:80) at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17) at oracle.sysman.ias.studio.app.ShortHostnameRedirectFilter.doFilter(ShortHostnameRedirectFilter.java:68) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370) at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453) at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302) at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:595)
S/W Details:_
Application Server 10.1.3.3.0+
Identity Manager 9.1.0.1+

Hi Veera,
Actually you are getting a warning message where one of two things could have happened. Either you specified an incorrect zone name or one of the zones has not been fully booted. It's likely that you haven't booted the zones, so please follow this:
zoneadm list -iv
If zone1 or zone2 are not running then boot and configure them
zoneadm -z <zone> boot
zlogin -C <zone>
After that you can continue to follow the step by step instructions at
http://docs.sun.com/app/docs/doc/819-2975/chddadaa?a=view
These may also help
http://blogs.sun.com/Jacky/entry/a_simple_expample_about_how
http://blogs.sun.com/SC/en_US/entry/sun_cluster_and_solaris_zones
Regards
Neil

SAP Design Studio ODBC Driver Not Found error while creating HANA connection.

Hi,
While creating SAP HANA ODBC connection in Design Studio via Tools > Preference > Application Design > Backend Connection. I am getting error ODBC Driver Not Found. Error screen shot is attached.
My Design Studio version is 1.3 win 32 bit
My OS Win 7 64 bit
I have installed both HANA client 32 bit and 64 bit.
I have tried creating DSN ODBC connection via "C:\Windows\SysWOW64\odbcad32.exe" and via Control Panel > Administrative tools > Data Sources(ODBC). But it does not detect it either.
I am not sure what needs to change to let Design Studio know which HANA client driver to use.
Please help!.

Hi Rohit,
This seems to be a known bug with Design Studio. Please see the SAP Note below on this.
1774480 - Fix launching of ODBC Data Source Administrator
Regards,
Abhijit

Page not found Error while creating new sub folder in the Sharepoint Document Library

Hi All,
I am a site collection administrator when i creating new sub folder under the folder in document library, am getting below error
"Page not found The
page you're looking for doesn't exist."
please help me, Thanks in advance!!
Srinivas

Hi Srinivas,
Please check ULS log for more useful information when this error occurs.
Please also check if this issue could be reprodued in other libraries, if not, you can use the new library instead.
Thanks
Daniel Yang
TechNet Community Support

Getting 404 not found error-while creating classic report - after sql query

my work space - upgrade
while iam trying to develop a page today in work space - under classic report - after i provided the query and when pressed next to go to report attribuites section - iam facing 404 not found issue.,
this is happening just today.
and all teh other pages are working fine - do not know what ios the issue - can anybody help me here please..
query used for classic report
select DISTINCT cust.customer,prod.ebs_team
from
CUSTOMER_11i@upgrade Cust
,BUG_PRODUCTS@upgrade PROD
where 1=1
and cust.product_id = prod.product_id
and prod.prodline = 'EBS'
and IS_CUST_11 = 'YES'
and NVL(IS_CUST_121,'NO') = 'NO'
and NVL(IS_CUST_12,'NO') = 'NO'
order by 1;
with regards
Shiva Prasad.k
Edited by: user759720 on Feb 14, 2012 5:00 AM

Hi Shiva,
to diagnose a 404 error please have a look at http://www.inside-oracle-apex.com/oracle-apex-got-404-not-found-2/
This should give you sufficient information to find out what is actually failing.
Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

Error while creating resource group using non-globalzones.

Dear all,
Hi techs please guide me how to create failover resource group in nongloablzones.
I'm getting error while creating resource group using non-globalzones.
My setup:
I have two node cluster running sun cluster 3.2 configured and running properly.
node1: sun5
nide2: sun8
I have create non-globalzone "zone1" in node:sun5
I have create non-globalzone "zone2" in node:sun8
node:sun5# clrg create -n sun5:zone1,sun8:zone2 zonerg
*(C160082) WARNING: one or more zones in the node list have never been fully booted in the cluster mode,verify that correct zone name was entered.*
kindly guide me how to create Apache resource group using non-glabalzones, i'm new to sun cluster 3.2. please guide me step by step information.
Thanks in advance,
veera
Edited by: veeraa on Dec 19, 2008 1:54 AM

Hi Veera,
Actually you are getting a warning message where one of two things could have happened. Either you specified an incorrect zone name or one of the zones has not been fully booted. It's likely that you haven't booted the zones, so please follow this:
zoneadm list -iv
If zone1 or zone2 are not running then boot and configure them
zoneadm -z <zone> boot
zlogin -C <zone>
After that you can continue to follow the step by step instructions at
http://docs.sun.com/app/docs/doc/819-2975/chddadaa?a=view
These may also help
http://blogs.sun.com/Jacky/entry/a_simple_expample_about_how
http://blogs.sun.com/SC/en_US/entry/sun_cluster_and_solaris_zones
Regards
Neil

Class not found error while accessing a Web Service

Hi All,
Im getting a Class not found error while doing method calls of a third party API.
The required jars(axis.jar) are set in the weblogic 8.1 classpath and I tried putting those jars(axis.jar) in my application lib folder also, but dint help. Please help me with a solution.
I'll paste the exception logs here by
java.lang.NoClassDefFoundError: org/apache/axis/AxisFault
at java.lang.ClassLoader.defineClass(Ljava/lang/String;[BIILjava/security/ProtectionDomain;)Ljava/lang/Class;(Unknown Source)
        at java.security.SecureClassLoader.defineClass(Ljava/lang/String;[BIILjava/security/CodeSource;)Ljava/lang/Class;(SecureClassLoader.java:123)
        at java.net.URLClassLoader.defineClass(Ljava/lang/String;Lsun/misc/Resource;)Ljava/lang/Class;(URLClassLoader.java:251)
        at java.net.URLClassLoader.access$100(Ljava/net/URLClassLoader;Ljava/lang/String;Lsun/misc/Resource;)Ljava/lang/Class;(URLClassLoader.java:55)
        at java.net.URLClassLoader$1.run()Ljava/lang/Object;(URLClassLoader.java:194)
        at jrockit.vm.AccessController.do_privileged_exc(Ljava/security/PrivilegedExceptionAction;Ljava/security/AccessControlContext;I)Ljava/lang/Object;(Unknown Source)
        at jrockit.vm.AccessController.doPrivileged(Ljava/security/PrivilegedExceptionAction;Ljava/security/AccessControlContext;)Ljava/lang/Object;(Unknown Source)
Thanks
Noufal

Hi,
Verify the 3rd party class files names are correctly written in your program. Sometimes wrong case might be the reason.
bye for now
sat

Page not found Error while open install app

I go through the all necessary steps to configure app domain & steps to create SharePoint hosted app still got 'page not found error'
The final app URL that i got afte r open install app -"http://app-125e72eedbe144.domain name:9922/FirstApp/Pages/Default.aspx?SPHostUrl=http%3A%2F%2Fsp1%3A9922&SPLanguage=en-US&SPClientTag=6&SPProductNumber=15.0.4420.1017&SPAppWebUrl=http%3A%2F%2Fapp-125e72eedbe144.domainname%3A9922%2FFirstApp"
i don't understand where i did mistake can any one help me to resolve that issue.

Hi,
According to your post, my understanding is that you get the “page not found” error while you open install app.
You need to have a SharePoint Web Application that is bonded to port 80 without a host header.
If you want to run it on https (SSL) then you also need to add an extra binding for SharePoint Hosted Apps to work.
For more information, please refer to:
Troubleshooting SharePoint 2013 Hosted Apps on-premises: “404 not found” error
404 & 401 Errors with the App Management Service - SharePoint
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Operation not found error while calling AM methods from managed bean

Hi,
operation not found error while calling AM methods from managed bean.
written a method with two parameters in AM.
exposed the method in AM client interface
in the page bindings added the method in method action ..left empty in the value fields of the parameters.
calling the method from managed bean like below
String userNameVal = (String)userName.getValue();
String passwordVal = (String)password.getValue();
OperationBinding operationBinding =
ADFUtils.findOperation("verifyLogin");
operationBinding.getParamsMap().put("userName",userNameVal);
operationBinding.getParamsMap().put("password",passwordVal);
operationBinding.execute();
i am getting operation verifyLogin not found error.Please suggest me something to do.
Thanks
Satya

Hi vlsn,
Can you try with the below code
// in your backing bean
OperationBinding operation = bindings.getOperationBinding("verifyLogin");
//Put your both parameters here
operation.getParamsMap().put("parameter_name1", parameterValue1);
operation.getParamsMap().put("parameter_name2", parameterValue2);
operation.execute();
if (operation.getResult() != null) {
Boolean result = (Boolean) operation.getResult();
and share the result.
regards,
Rajan

404 Not Found, Error: The requested resource does not exist.

Hi all,
When I try to access VC with the http://localhost:50400/vc where 04 is the CE1 instance, it returns the following error:
404 Not Found
Error: The requested resource does not exist.
Any clues. Just to add that the CE1 servers are running green and nwa is accessible on same url.
Regards.

Hi
Try with following link (VC should be in Caps) -
http://localhost:50400/VC/default.jsp
Also check whether you have proper admin roles assigned to your user id.
Regards
Sandeep
Edited by: Sandeep Patki on Sep 16, 2009 8:47 AM

It shows the log sequence not found error while all the log seqences exist?

Why the database shows the log sequence not found error while all the log seqences exist?
SQL> select*from v$log_history;
RECID STAMP THREAD# SEQUENCE# FIRST_CHANGE# FIRST_TIM NEXT_CHANGE#
RESETLOGS_CHANGE# RESETLOGS
1 657328345 1 1 519368 13-JUN-08 543434
519368 13-JUN-08
2 657370849 1 2 543434 13-JUN-08 567705
519368 13-JUN-08
3 657373012 1 3 567705 14-JUN-08 570408
519368 13-JUN-08
RECID STAMP THREAD# SEQUENCE# FIRST_CHANGE# FIRST_TIM NEXT_CHANGE#
RESETLOGS_CHANGE# RESETLOGS
4 657373039 1 4 570408 14-JUN-08 570464
519368 13-JUN-08
5 657374623 1 5 570464 14-JUN-08 573505
519368 13-JUN-08
6 657375015 1 6 573505 14-JUN-08 573856
519368 13-JUN-08
RECID STAMP THREAD# SEQUENCE# FIRST_CHANGE# FIRST_TIM NEXT_CHANGE#
RESETLOGS_CHANGE# RESETLOGS
7 657376537 1 1 570465 14-JUN-08 573543
570465 14-JUN-08
8 657377084 1 2 573543 14-JUN-08 575109
570465 14-JUN-08
9 657377094 1 3 575109 14-JUN-08 575114
570465 14-JUN-08
RECID STAMP THREAD# SEQUENCE# FIRST_CHANGE# FIRST_TIM NEXT_CHANGE#
RESETLOGS_CHANGE# RESETLOGS
10 657377103 1 4 575114 14-JUN-08 575121
570465 14-JUN-08
11 657377106 1 5 575121 14-JUN-08 575123
570465 14-JUN-08
11 rows selected.
RMAN> flashback database to sequence=10 thread=1;
Starting flashback at 14-JUN-08
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=155 devtype=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of flashback command at 06/14/2008 13:03:15
RMAN-20206: log sequence not found in the repository

Apart from the output being hardly readable (please refer to the FAQ in the right upper hand corner how to post output), I don't see any sequence 10.
You seem to mistake the column recid for the sequence column.
The sequences are listed in -not surprisingly- the sequence# column.
Sybrand Bakker
Senior Oracle DBA

Page not found error while opening sharepoint 2013 site

page not found error while opening sharepoint 2013 site
Please help me on this

Hi,
Please check the log file to find more information about this issue. The path of the log file is:
C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\LOGS.
In addition, please make sure the URL of the site is correct.
Please check whether you could access other pages in the problematic site.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

'dimension attribute was not found' error while refresing the cube in Excel

Dear All,
Thanks for all your support and help.
I need an urgent support from you as I am stuck up here from nearly past 2-3 days and not getting a clue on it.
I have re-named a dimension attribute 'XX' to 'xx' (Caps to small)in my cube and cleared all dependencies (In Attribute relationship tab as well).
But while refreshing the data in excel client (of course after processing the full cube) I get an error
'Query (1, 1911) the [Dimension Name].[Hierarchy Name].[Level Name].[XX] dimension attribute was not found' error.
Here I am trying to re-fresh an existing report without any changes with the new data.
Does not it re-fresh automatically if we clear the dependencies or there something that I am missing here (Like order of the dependencies).
Cube processed completely after modifications and able to create new reports without any issues for same data. What else could be the reason?
Can some one help me here?
Thanks in Advance and Regards,

Thnaks alot Vikram,
In se11 ,when i was trying to activate the /BIC/FZBKUPC , it is showing the warnings like
Key field KEY_ZBKUPCP has num. type INT4: Buffering not possible, Transport restricted.What it means.
In PErformance Window it is showing like:
A numeric type was used for a key field. A table of this sort cannot be buffered.When buffering, the table records for numeric values cannot be stored in plain text.
Procedure
You can enter "no buffering" as an attribute of the technical settings and then repeat the activation process. The table is not buffered.
If you want to buffer the table, you must replace the type in the key field by a character type, i.e. that you must modify the table.
Please adivice with your valueable suggestyions.
Thanks Vikram.

404 Not Found Error while testing INTEGRATION_DIRECTORY_HMI

Hi,
I am installing XI 3.0 SR1 on Win2000 sp4. I got struck at page 40 of installation guide trying to configure rfc destination INTEGRATION_DIRECTORY_HMI. I gave all the parameters as specified in the guide and clicked on "Test". I am getting the 404 Not Found error. The detalied error log is attached below. Can some one please let me know what could be the reason for the error?
Thanks
Sireesha
HEADER NAME                HEADER VALUE
~response_line               HTTP/1.1 404 Not Found
~server_protocol             HTTP/1.1
~status_code                 404
~status_reason               Not Found
connection                   close
pragma                       no-cache
cache-control                no-cache
expires                      0
content-type                 text/html
content-length               1539
server                       SAP J2EE Engine/6.40
date                         Fri, 03 Feb 2006 04:00:56 GMT
HTTP BODY
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <html>
<head> <title>Error Report</title> <style> td {font-family : Arial,
Tahoma, Helvetica, sans-serif; font-size : 14px;} A:link A:visited A:active </style
> </head> <body marginwidth="0" marginheight="0" leftmargin="0" topmar
gin="0" rightmargin="0"> <table width="100%" cellspacing="0" cellpaddin
g="0" border="0" align="left" height="75"> <tr bgcolor="#FFFFFF">
<td align="left" colspan="2" height="48"><font face="Arial, Verdana, Hel
vetica" size="4" color="#666666"><b>  404 &nbsp Not Found</b><
/font></td> </tr> <tr bgcolor="#3F73A3">     <td height="23" width="8
4"><img width=1 height=1 border=0 alt=""></td>     <td height="23"><img
width=1 height=1 border=0 alt=""></td>     <td align="right" height="2
3"><font face="Arial, Verdana, Helvetica" size="2" color="#FFFFFF"><b>SA
P J2EE Engine/6.40 </b></font></td> </tr> <tr bgcolor="#9DCDFD">
    <td height="4" colspan="3"><img width=1 height=1 border=0 alt=""></
td> </tr> </table> <br><br><br><br><br><br> <p><font face="Arial, Ve
rdana, Helvetica" size="3" color="#000000"><b>  The requested
resource does not exist.</b></font></p> <p><font face="Arial, Verdana,
Helvetica" size="2" color="#000000"><table><tr><td valign="top"><b>&nbsp
;Details:</b></td><td valign="top"><PRE>Go to <A HREF="/" target="_paren
t">main page</A> of this application!</PRE></font></td></tr></table></fo
nt></p> </body> </html>
Time (ms)                                134

Hi Sireesha -
>>>As per your suggestion. I am trying to reinstall the XI Component again. But the setup is not asking me for any uninstallation of the existing setup nor any message saying that you already have the XI Component installed. Does it mean that the XI Component got deleted automatically?
It's hard for me to say not being able to see your system, but here are some things you can check:
- check link http://<xi_host>:<j2ee_port>/sap/monitoring/ComponentInfo
You should be able to see components like SAP_XITOOL, SAP_XIAF, SAP_XIAFC which would indicate that XI components are installed. You need role SAP_J2EE_ADMIN to access this.
- Using SDM, you can see what's currently deployed in the SDM repository for XI related components.
- Using Visual Admin, you can look for XI related services within the Server instance.
But in any case, try reinstalling the XI Java components (which is really what you're installing following the SR1 Installation Guide). If you run into problems during the installation and it's possibly due to already existing XI components, I would recommend, cleaning the slate and uninstalling the J2EE Add-in and starting again from the J2EE add-in part. Instructions for deleting the add-in are in the corresponding WebAS Java 6.40 <platform/db> install guide (in the last section - "Additional Information").
Regarding the central adapter engine, yes, this is installed automatically when you do the main installation of the XI Java components. Instructions in the SR1 guide specifically referring to the Adapter Engine are for a decentral adapter engine.
Hope that helps.
Best regards,
Jin

FILE NOT FOUND ERROR WHILE INSTALLING ORACLE EM GRID CONTROL 10.2.0.1

FILE NOT FOUND ERROR ON FILES: generalstup, seedstup during the setup phase and when i click ignore from a list of cancel, retry and ignore it moves to the configuration phase and rapidly moves from 63% to 100% and gives the error OUI-10133 invalid staging area. i have tried the install 3 times and dont know what the problem is. i am doing the oracle EM GC INSTALL WITH NEW DATABASE OPTION. i downloaded the full version disks 1-3 from the website:http://www.oracle.com/technology/software/products/oem/index.html
Enterprise Manager 10g Grid Control Release 2 (v10.2.x)
Full Installers (Agent, Repository, OMS, and Management Packs)
Oracle Enterprise Manager 10g Grid Control Release 2 (10.2.0.1) for Linux x86
when this is extracted it leaves me with Disk1, 2, and 3
install started from 1, then it later asks for two whick happens to instead be but under Dist 3-but there are two disk2's under Disk 3- one under oms and one under rdbms folder. i have tried both and alas same errors
i even triwd the same download from edelivery.oracle.com and gives the same madness
am stuck.

i followed the link and all the instructions things seemed to go well: it still asked for two files i did not have or could not locate: first its asked for generalstub, then it asked for seedstup and then generalstup again. at this point the installation was at 67% and had passed the link succesful stage and was at the setup succeful stage. when i clicked ignore on generalstub, seedstup and then generalstup again it quicly moved to 100% and never took me to the stage for me to run oraInstroot.sh and allroot.sh
the configuration assistant stage never cameup and it skipped to the page Specify Repository Database Configuration
where it asked for repository database hostname port, service/sid and SYSMAN password and also manament service security password. whe i input all the infor mation it will give errors. i have tries deleting all oracle 3 or 4 times and all files that oracle has and repeated the process and am always stuck here.
error reads :
-error cheching the existence of the SYSMAN user in Management repository
-exception occured while connecting to database . please check the connection details you specified and retry
-io exception connection refused: (DESCRIPTION=(TMP=)(VSNUMM=168821760)(ERR=12514)(ERRO_STACK=(ERROR=(CODE=12514)(EMFI=4))))
REP DB HOSTNAME:SA-OMS-01
PORT:1521
SERVICE/SID:OMSDB01
SYSMAN PASSWORD:PASS
THE REST I PUT PASS AS PASSWORD
NOT SURE WHAT TO DO NEXT.

MBean not found error while creating Resource Adapter

Similar Messages

Maybe you are looking for