MBM5 - anyone figure out the sensors?

I've been using the latest version of MBM5, and it does work okay (more or less)with the K8N Neo, but the sensors are screwed up.
There are three functional sensors:
Winbond1 - Northbridge - 40c idle, 44 load (listed as "Case")
Winbond2 Diode - CPU  - 35c idle, 48-52 load
Winbond3 - ? - 46c idle, 47c load
I'm pretty sure of the NB and CPU sensors, but the third one I don't have a clue what it is.
Winbond3 always runs about 10 degrees hotter than the CPU (Winbond 2 Diode) at idle.
The Winbond2 Diode (CPU) shows fairly rapid temperature change - like an on-chip sensor would.  The Windbond 3 remains relatively static in proportion to the rise of the CPU.  For example, under heavy load, the CPU temp rose 10 degrees, but the Winbond3 temp rose only 1 degree.
The temps I see appear to be fairly accurate:  With an ambient temperature of 70 degrees F, the temps right now idling are 35c CPU, 40c NB.  I have a sensor mounted inside the heatsink which reads 29.5c.
MBM5 lists a bunch of other sensors that do not appear to work:
Winbond1 2N2394
Winbond1 Diode
Winbond2
And then three that have what must be incorrect temps (they all read 127c):
Winbond2 2N3904
Winbond3 Diode
Winbond3 2N3904
I also noticed that MBM5 misreported my vcore - at 2.65 volts!  Haven't checked the rest of the settings.
Maybe it's all a bios issue?

Huh, that's just the exact opposite of mine.  I wonder what on earth Winbond3 is?
And why is it running so hot on mine (in relation to the NB and CPU)?
Any idea what the other 3 sensors (running at 127c) are?
I wish we could get some technical data from MSI on what the actual sensors are.  Make it a helluva lot easier to make sense outa all this.

Similar Messages

  • Has anyone figured out the deleted documents thing?

    I NEED my documents back?! has anyone figured out how to fix this problem yet?

    Could you please update to the latest version of Adobe Reader i.e. 11.2.3.
    There was an issue on iOS6 due to which App was crashing.
    Hopefully updating to the latest version will get your documents back provided you haven't uninstalled the app.
    Thanks,
    Ankit
    Adobe Reader Team

  • Has anyone figured out the sms:// url scheme yet?

    I can't figure out how to prepopulate the body. I've tried sms://nnnnnnnnn?body, message and a ton of other things but none seem to do the trick.
    Any ideas?

    I don't have time to dig into this, but I presume you have the draft RFC available for reference?

  • Has anyone figured out the video driver issue with tx2000?

    my tx2525nr is having issues... the screen works great for a bit then it starts to flicker and or go black, then it locks up and gives me a blue screen of death stating the atimag*.* driver is bad..i heard the issues is with the driver not compatible with win 7. so i changed back to vista premium. well it started again after i did all my updates. but worked fine until then... doesnt anyone know what driver to use?

    On your iPhone go to Settings > General > Reset and select Reset Network Settings.
    This will erase all wi-fi network settings from your iPhone.
    If no change after that, try restoring your iPhone with iTunes as a new iPhone or not from your iPhone's backup. This will not prevent you from restoring the iPhone from the most recent backup later if no change after this.
    If no change after restoring your iPhone with iTunes as a new iPhone or not from your iPhone's backup, your iPhone has a hardware problem with the wireless card or with something else. The iPhone includes a one year warrranty.

  • Anyone figure out the time zone issue?

    Hey Everyone,
    I've read about this on some other forums and there seems to be no resolution, nor acknowledgement by VZW or HTC that this is an issue (unless I missed it)
    I am in Arizona, and when the time is set to network time, it goes back and forth between Pacific and Mountain (currently an hour difference) and only remain in Mountain when I set the network time myself, but, My Verizon doesnt work unless youre on network time.
    I've seen in other forums this is impacting users in NM, AZ and CA.
    Pretty essential part of the phone...wonder why it doesn't work.

    I just noticed this last night.  Was 3am but the phone said it was 2am.  What is strange is that in the 4 days I had the phone, I don't think it did that before.
    I went to date and time and unclicked the Use network time and set the timezone to AZ instead of Mountain and the time popped back to where it belongs.
    Hard to fathom that the towers don't know what state they are in.   This is in the Phoenix area so it is not a near the border issue.   Until I read this, I didn't know not using network time would prevent anything from working, but I rarely use the VZW tools on the phone.

  • I am moving from Southern California to Maui, Hawaii and I need to figure out the best way to get my 24 inch iMac across the ocean. Does anyone know the best way to do this?

    I am moving from Southern California to Maui, Hawaii and I need to figure out the best way to get my 24 inch iMac across the ocean. Does anyone know the best way to do this? I have found GearGrip's LCD harness so that I can do carry-on onto the plane...  Or maybe use a Pelican Case to do it as a "checked bag"? Or any other suggestions??! Please help!
    Thanks so much!!

    I don't recommend you send the iMac in a checked bag. Might get damaged.
    Check the airlines website for carry on guidelines.
    Or, if you have the original box that the iMac came in, if you have someone who can pick up the iMac for you, send it ahead Fed Ex and insure the package.
    Just make sure the display is covered to protect it. A blanket perhaps.
    Aloha ...

  • Has anyone figured out how to make the Yamaha 01V96i mixer work with Logic 9.1.8

    Has anyone figured out how to make the Yamaha 01V96i mixer work with Logic 9.1.8 as a control surface ?

    In YAMAHA01v96i:
    Go to DIO/SETUP select Generic DAW. Go to MIDI settings page and set the desired port (personally I use Number 1), Select the same audio frequency you use in your DAW (I use 44.1KhZ)...at this point You should save a scene in you 01V96i to avoid to repeat all the procedure again.
    Open studio manager, go to patch and set the input port from 17 to 32 respectively to USB1-USB16 (this will give you the return from you DAW to the 01v96i
    Save again the scene overwriting the old one.
    in LOGIC
    Click on preferences, select Audio then select 01v96i, then click on control surface and select Mackie design Baby HUI and in the midi session set the same port that you've been setting on the Yamaha 01V96i (Port 1 if you follow this example).
    That's more or less it.
    It worked for me...so far

  • Anyone figure out how to solve the 1015 error

    anyone figure out how to solve the 1015 error

    Each version of Photoshop has its own installation path therefore a different application as fars as Wacom Configuration.  You would need to set preferences for each Photoshop installed on your system.  However if you know XML.  Wacom Tablet Preference File Utility can save your Wacom preferences into an XML file.  That you may be able to duplicate a Photoshop install and the change the Photoshop Path. Or just change the prion version pathe the the new Photoshop path then restore your Wacom Preferences using the modified XML preference file.
    Here you see part of my wacom preferences I have set preferences for all Photoshop installed on my workstation.

  • Has anyone figured out a way to make the first desktop on Lion/Mountain Lion moveable?

    Has anyone figured out a way to make the first desktop on Lion/Mountain Lion moveable? I.e. I can reorder all the other desktops but I can't change the position of the very first one. I just don't use it becasue I am changing the order of my desktops a lot, and it's annoying to not be able to put any other desktop before Desktop 1. Thanks!

    or my actual question is -- is there anything inherantly wrong with this approach.. i mean, if i can get it to make it through consistently, is there a problem with it repeating / updating the variable so many times in a row? is it a drain on system resources or can it break anything etc.?
    Although I'm far from being an expert in programming, I would answer NO. Imho, you've just got a brillant idea! (As for “repeating / updating the variable so many times in a row”… you could add a short delay (like “delay 1”) inside the repeat block, but I don't think it's a must.)

  • Anyone figured out a way to use JWS without needing the MIME type preloaded

    Anyone figured out a way to use JWS without needing the MIME type preloaded on the client's computer?
    Why is it not server-side loading? How can I force a load of JWS and the MIME-type?

    when you install web start, the mime type jnlp is associated with WEBstart.
    The WEB start home page has code to request an
    install if web start is not on the user system.
    On the web server, of course you need to specify the association between a
    .jnlp file and the mime type. This is in the configuration of the server.
    It would be nice if standard ISP's provided that for user directories.
    Anyone think AOL would do this?
    After all it should not cost anything like installing servlets.

  • Please help me figure out the reason for this error

    Hello I am trying to run the jar Gui file I got from http://www.cs.cmu.edu/~cmucam/cmucam2/downloads.html
    and am getting the following error:
    Exception in thread "main" java.lang.UnsatisfiedLinkError: no sserial in java.li
    brary.path
    at java.lang.ClassLoader.loadLibrary(Unknown Source)
    at java.lang.Runtime.loadLibrary0(Unknown Source)
    at java.lang.System.loadLibrary(Unknown Source)
    at serialPort.<clinit>(serialPort.java:22)
    at SerialComm.<init>(SerialComm.java:50)
    at CameraSerial.<init>(CameraSerial.java:64)
    at MainWindow.<init>(MainWindow.java:620)
    at CMUcam2GUI.main(CMUcam2GUI.java:7)
    Can anyone figure out why I am getting this error? I am running it on a windows xp professional system.

    Yes you need the sserial native library (and no I do not know where to get it).

  • Has anyone figured out how to get speech recognition working with sticky keys enabled on mountain lion?

    I'm trying to use speech recognition to input text on my iMac running the latest mountain lion, 10.8.3.
    I have sticky keys enabled.
    When I try to start speaking by pressing the function key twice nothing happens. I can only get it to work if I disable sticky keys.
    The same problem occurs with all the other modifier keys as shortcut, they do not work with sticky keys.
    When I try to select a different shortcut, I am unable to select a two key combination, but am limited to one.
    If I select the F6 key, or any other single key, I am able to start speech recognition. However the second time that I press the key, it does not stop recognition and process my words. Instead, it restarts the recognition.
    Has anyone figured out how to get speech recognition working with sticky keys enabled?
    Or a way to get an individual key shortcut to start on the first press and process it on the second?
    Or a way to get key combinations to work, as specified by the help:
    Dictation On and Off
    To use Dictation, click On.
    When you’re ready to dictate text, place the insertion point where you want the dictated text to appear and press the Fn (function) key twice. When you see the lighted microphone icon and hear a beep, the microphone is ready for you to speak your text.
    Shortcut
    By default, you press the Fn (Function) key twice to start dictation. If you like, you can choose a different shortcut from the menu.
    To create a shortcut that’s not in the list, choose Customize, and then press the keys you want to use. You can press two or more keys to create your shortcut.

    I noticed with version 10.8.4 of OS X that I am now able to select F6 to activate, and the return key to complete the speech recognition. This is still different than the description of how these should function that's included in the help, but at least it's an improvement.

  • Has anyone figured out how to scan from an HP officejet Pro 8600 after upgrading to OS 10.9.4

    Has anyone figured out how to scan to  a MacBook Pro with 10.9.4 from HP officejet Pro 8600?

    iMovie acts as it does, I suspect, because it's so much safer (and easier) to program.
    As iMovie is now structured, each clip has a startFrame and an endFrame. They show the starting point and ending point of that clip in its source file. There's only one of each. Simple.
    For us to remove a portion of the middle without splitting the clip in two, iMovie would have to allow each clip to have multiple start/end points. So iMovie would have to "remember" that the clip starts playing at frame 100, stops at frame 120, starts again at frame 150, stops at frame 200, and so on. Very complicated.
    The amount of data that would be required to undo a change, for example, could become quite large, and be very, very complicated. Lots of opportunity for errors. Imagine what iMovie would have to "remember" if we could remove the middle, added a title to the clip, remove part of the title, then split the clip and applied a slow motion effect to the second part of the split.
    This way is simpler, and not all that inconvenient for users, in my opinion. I prefer simple when it adds to reliability.
    Karl

  • Anyone Figured Out How to Get Snow Leopard Working on a Retina 15" ?

    Hi All,
    Has anyone figured out a way to get Snow Leopard to install and run stable on a Macbook Pro 15 Retina?
    Just like Lion, Mountain Lion is flaky, and just isn't as rock solid as Snow Leopard.
    Media, Finder, and a host of other system level attributes that were perfect in Snow Leopard are buggy in Mountain Lion.
    Examples: Finder is weird now, and 19 full length movies that played perfectly in Snow Leopard under iTunes and my iPhone were wiped from my iPhone and deemed "not compabitle" under Mountain Lion.
    As I posted when Lion came out, sometimes different is not better, it's just different. I now wish I hadn't sold my '09 Macbook Pro 17 to buy my Retina 15.
    The big obstacle, of course is the fact that the Snow Leopard install doesn't have the correct drivers for video and other subsystems for my new Retina 15.
    So, anyone figured out a work around?
    Thanks,
    Mark

    You have got to be kidding if you think Windows 2000 was the most stable and bug free. And it quickly aged itself out of business and you could not connect any peripherals that appeared 2 years after its release. I think Windows 7 is far more stable and my second choice would be Windows XP.
    Mountain Lion is running just fine on my late 2011 MPB and running fine on my 2 friends who have the rMBP. And they like to rub it in that they both have the rMBP.
    And most people who rate such things claim Tiger was the most stable. You should have seen all the threads here with complaints about SL when it was released.

  • Has anyone figured out a way to watch HBOGO, with iPad2 to HDMI TV?

    Has anyone figured out a way to watch HBOGO, with iPad2 to HDMI TV?, &amp; actually get more than the HBOGO SPLASHSCREEN &amp; audio? I am visually handicapped, &amp; would like to see Deadwood &amp; Enterage episodes on bigger screen..Thank you in advance! Jules

    Whoever told you Elements 3 won't work in Leopard was simply wrong. It does. Elements 2 and Photoshop 7 will not work, Elements 3 and Photoshop CS1 will both work. My understanding is that the code for both the non-working ones was a kludge of the original code built for the Classic Mac OS to get it to run natively in OS X, and, since Leopard no longer supports Classic code in any way neither PS 7 nor Elements 2 will work, ever. Don't know whether that theory about the code is correct or not, but it sounds sorta reasonable. But whether that is the explanation is irrelevant: Elements 2 and PS 7 do not work in Leopard.
    Why not do what I'm going to do: get off Adobe's gravy train. I'm going to buy Elements 6 when it comes out (which is about half what it costs to upgrade my CS1 to CS3), and spend some more quality time with the GIMP. No more upgrades of Photoshop for me.
    Francine
    Francine
    Schwieder

Maybe you are looking for