Mbox recognized but NOT working--input volume greyed

I have the original Mbox, which came with protools 6.4
I used to use the mbox with garageband and have no problem.
At some point I updated to OS 10.4.3
At about the same point I updated to protools 7.0
Now the Mbox appears in the pref list in garageband, but when I select it (as opposed to the built in mic) the input volume of the selected tracks goes grey and I the imput from the Mbox is not recognized in garageband.
I read all about how I should install the standalone core audio driver and uninstall protools. I have done this and still no luck. I have tried standalone core audio drivers versions 6.9, 7.0, and 7.3. No luck.
The only thing I can think is that I have not properly uninstalled protools 7.0. I did an uninstall of 6.4 with the CD, and since I don't have the CD from 7.0, I called digidesign and they are sending me one. In the meantime they emailed me a 'PT Cleaner' that is supposed to disable all PT related files.
All I can think is that I really need to wait for the PT 7.0 CD and run an uninstall with it, and then re-install the standalone core audio driver.
Could it be something else? I am at wit's end!
I repeat: THE MBOX APPEARS IN GARAGEBAND PREFS, BUT WHEN IT'S SELECTED, THE INPUT VOLUME IS GREYED AND NO SIGNAL GOES INTO GARAGEBAND.
I HAVE TRIED EVERY VERSION OF STANDALONE CORE AUDIO. HELP!!!!
(ps--i don't have an intel mac)
Powerbook G4 1.33 Mac OS X (10.4.3) 2004

WHEN IT'S SELECTED, THE INPUT VOLUME IS GREYED
THAT IS NOT YOUR PROBLEM, SOMETHING ELSE IS:
http://www.bulletsandbones.com/GB/GBFAQ.html#volumesliderdisabled

Similar Messages

USB Devices Recognized but not working!

Having issues with working USB devices, but only some...??? Very confused. Here it is:
- 20gig ipod, ipod mini all recognized by apple system profiler and working (shows up on desktop) Through USB and firewire
- Canon Rebel XT (USB 2.0), Macally mouse(USB 1.0), RECOGNIZED in apple system profiler...but not working!!! Iphoto doesn't recognize a camera is connected and mouse not responding
The camera in mouse i tested in another mac and they are working.
If my logic board is cooked, then why would the ipods still work?? So, what is the problem???? PLEASE HELP
luc

Luke, many of the peripials such as cameras, printers, scanners, some will plug right in and work.
Others, need to plugged in and restart your computer,for them to work.
and last but not least some need there own drivers to operate correctly.
Those that need drivers normally come with an insallation CD for this purpose... Cheers...Don

Blue Yeti Pro Mic recognized but not working

I just recently got a Blue Yeti Pro and I can't get it to work on my Mac. There is no sound coming out of it. It only seems to work when I plug in the headphones. The red light is on, I've tried restarting my Mac, plugging and unplugging the mic, updated my OS, switching usb ports. Nothing seem to work! HELP!!!

WHEN IT'S SELECTED, THE INPUT VOLUME IS GREYED
THAT IS NOT YOUR PROBLEM, SOMETHING ELSE IS:
http://www.bulletsandbones.com/GB/GBFAQ.html#volumesliderdisabled

Wireless Keyboard Recognized but not working.

I have a wireless keyboard that is recognized but for some reason will not work at all. No typing possible. Replaced the batteries etc.... nothing. Any suggestions?
Thanks
IMac G5 Mac OS X (10.4)

Troubleshooting wireless mouse and keyboard issues
http://support.apple.com/kb/TS3048

External display recognized but not working?

So, I've got kind of a weird problem.
Whenever I connect my iMac (through the Thunderbolt port) to my 32" RCA HDTV via a displayport to HDMI adapter, it shows on my iMac that there is a display connected (TTE HDTV), but my TV isn't recognizing it. I have tested the port/TV using my Windows laptop with a (native) HDMI port and there have been no problems.
I would think it was the cord I bought, except that my iMac recognizes an external display. It doesn't seem to be the TV's fault, and I've tried every resolution setting.

Yeah I have been having the same problem. When I'm looking at the Display Settings, it comes up with Samsung 1080 when its connected, however the tv doesnt recognize it. And if i unplug the HDMI cable from the adapter, the Tv options go away. There must be some sort of TV setting maybe? I am also using a passive adapter.

When connecting my ipod nano (5 gen) I get an error messege saying that it was recognized but not properly. Ive tried everything the support site says and it still not working. What do I do now?

When connecting my ipod nano (5th gen) I get an error messege saying that it was recognized but not propperly. I treid everything that the support site said to do but it still not working. What do I do no?

This came from another thread, but worked for me. Problem is with newest iTunes 4.62. Unistall iTunes, as well as its helper programs (Apple Application Support, Apple Mobile Divice Support, and Apple Software Update). Reboot, and reinstall iTunes. It will reinstall all the other ones and you should be able to connect your nano. Good luck.

I can't get volume on Main Output to work correctly with controllers on my keyboard. It's either all on or all off. Works fine for individual instruments (thought it lumps them all together) but not for main volume output on concert. Thanks for any help.

I can't get volume on Main Output to work correctly with controllers on my keyboard. It's either all on or all off. Works fine for individual instruments (thought it lumps them all together) but not for main volume output on concert. Thanks for any help.

Hi
frodojon wrote:
I either didn't do the correct mapping sequence before or I'm starting to wonder if it has something to do with my keyboard which has the expression pedal set to the same volume control as the mod wheel.
All this sounds like you are confused about the general nature of MIDI Continuous Controllers (MIDI CC). The MIDI specification allows for 128 different CC's: CC0 to CC127. Some are typically "preallocated" to 'standard functions: CC1= Modulation, CC7=Volume, CC10+Pan, CC11= 'Expression'. Some act as switches such as 'Sustain' CC64.
frodojon wrote:
Everything appears to be scaled from -63 to +64 if that's what you mean by scaling? What do you mean by MIDI CC7?
Mainstage works with MIDI CC's generally in a number of ways:
Some standard ones are automatically passed through to all MIDI/Instrument channels unless you specifically block them. Others are not passed through unless you specifically map them to something.
This mapping can be done basically two ways (with MS 2.2):
a) Make a Screen Control in Layout mode, and assign it to a particular incoming MIDI CC message. Then, you can map this Screeen Control to a variety of parameters such as the volume of a particular channel strip.
b) With MS 2.2, you can do the above Assign and Mapping directly, without the need for Screen Controls as an 'intermediary'.
frodojon wrote:
something to do with my keyboard which has the expression pedal set to the same volume control as the mod wheel. I
Yes.
It sounds to me like you have an issue where you have several hardware controls on your Keyboard set up to transmit the same MIDI CC. This is probably not a good idea, and it would be much better if you assigned them to transmit different CC messages (CC1 for Modulation and probably CC11 for the Expression (though you may want to set the pedal to some other number instead.
Once you are transmitting different CC messages, you will be able to Assign and Map much more flexibly:
for example, you could one to control the overall output volume at Concert Level in MS, whilst the other controls the volume of a specific channel within a Patch.
Your issue of layered patches is one of "Scaling": one Screen Control (assigned to an incoming MIDI CC message) needs to alter the ranges of different channel strips to different amounts. You can set this up by using multiple mappings for one Control, each set to work over a particular range (for example a goes from -20 to 0 whilst b goes from -30 to -20 etc.).
hth
CCT

Ipod 4th gen volume buttons not working. Volume bar not showing in music or video apps, not a speaker problem as this works fine when testing built in alarm tones???

Ipod 4th gen volume buttons not working. Volume bar not showing in music or video apps, not a speaker problem as this works fine when testing built in alarm tones???

Have you tried the standard fixes:
- Reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backup via iTunes
- Restore the iPod to factory defaults/new iPod.
If still problem you likely have a hardware problem and an appointment at the Genus Bar of an Apple store is in order.

Updated my iphone 3gs, lost my music and apps, they are backed up on itunes, how do I move them back to my phone, tried to sync but not working, please help

Updated my iphone 3gs, lost my music and apps, they are backed up on my computer but i cannot move them over to my phone, tried to sync but not working, please help

well first make sure that when you click on the name of your iphone on the left hand side of itunes that you go to the app and music tab and check mark the sync apps and sync music. then try clicking apply in the bottom right hand corner. then if not try doing it again after going to prefrences in the top menu and going to devices tab and click reset sync history if that doesnt work with music try and drop and drag to the name of your iphone, lastly if that doesnt work you can try restoring from a backup from before you updated. it will keep the new software but put everything that was on your phone when you created the backup back onto your phone.
http://support.apple.com/kb/HT1351 for syncing music

I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?

I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?

it allows you to use your cr files, Adobe - Adobe Camera Raw and DNG Converter : For Windows
Camera Raw: How to use Adobe DNG Converter - YouTube

Camera Raw 5.1 downloaded and unzipped but not working in CS4. Can't open Nikon D90 NEF files.

Camera Raw 5.1 downloaded and unzipped but not working in CS4. OS Windows 7. Can't open Nikon NEF files. Camera Nikon D90.

update the adobe program that needs cr 4.6+, http://www.adobe.com/downloads/updates/

Hi I'm trying to purchase but not working

Hi I'm trying to purchase but not working. It's telling me to contact apple support. I bought today one time but I can't buy again. I contact the bank and they said there is nothing wrong from their side so the problem only with the apple store. Please advice.

iTunes and App store
Contacting the iTunes store
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]

Update to 10.6.8 and HP F2100 and D2400 Printers stopped working. Restored 10.6.7 and printers from Install CD's but not working, Same with scanner

Help....
Updated to 10.6.8 and HP F2100 and D2400 Printers stopped working.
Restored 10.6.7 and printers from Install CD's but not working.
Same with F2100 scanner
Am I glad I kept Windows desktop as without it I would be scre**ed now
What is going on with this latest update as its like a return to Windows with things crashing or hanging up every few minutes????
On a MacBook Air that has not been updated everything still works so what has 10.6.8 done and why won't the restore to 10.6.7 work?
Steve

None of those things you mentioned were what I suggested.
I'm guessing the "ctrl click in printer preferences" means you Reset the Printing System?
If so, that is what I would have suggested if deleting it by selecting the ( - ) button and then adding it with the ( + ) button.
But, if HP has a fix, it likely needs to update its drivers.

HT201210 trying to download an instal ios 7 on my iphone 4s, after half an hour into the download it came up with a message saying failed and everytime i try again the download doesnt start. tried downloading from itunes aswel but not working. anyone know

trying to download an instal ios 7 on my iphone 4s, after half an hour into the download it came up with a message saying failed and everytime i try again the download doesnt start. tried downloading from itunes aswel but not working. anyone know why?

The servers are overloaded. There are a hundred million people all trying to download iOS 7 at one time. Try again later

Android kitkat issue in loading swf file from device. URL found but not working

Hi,
I am facing one issue from a very long time regarding file access in Android Kitkat version 4.4.*. I have developed Adobe Air player application for android and it is working as expected below kitkat version but not on kitkat.
I am following this methods -
NativeApplication.nativeApplication.addEventListener(InvokeEvent.INVOKE, onInvoke);
public function onInvoke(event:InvokeEvent):void
                                    var newFile:String = String(event.arguments[0]);
                                    trace("Received new file from Android: "+newFile)
Received URL form device in Android Kitkat -
/storage/emulated/0/.iProfData/swf/playListFiles/ContentCreation/Ma_V2_522/en/Animation/27 031_1_Welcome screen.swf
file:////storage/emulated/0/.iProfData/swf/playListFiles/ContentCreation/Ma_V2_522/en/Anim ation/27031_1_Welcome screen.swf
                - Loading this URL using loader class in AS3 AIR but not working.
file%3A///storage/emulated/0/.iProfData/swf/playListFiles/ContentCreation/Ma_V2_522/en/Ani mation/27031_1_Welcome%20screen.swf
       - Have used also by doing escape character but still it is not working showing file not found both SWF and mp4 case. (Mp4 case NetStream.Play.FileNotFound)
By using the above methods I can have swf or mp4 video url but when I am loading it, It is not working giving error message "File not found/ IO Error". I have read that if use escape character then it will work but I have used escape character also but it is not working.
Humble request you to please advise how can I solve this issue.
Best regards,
Sunil Kumar

Starting in KitKat, Google requires that applications have permission to access files on the system. You must specifically add either the READ_EXTERNAL_STORAGE or WRITE_EXTERNAL_STORAGE permissions in order to access files. Adding either one of those permissions should let you read/access files on the device. Prior to KitKat, you didnt have to have these permissions listed in the manifest to access files.

Mbox recognized but NOT working--input volume greyed

Similar Messages

Maybe you are looking for