MBP 13 + 10.6.2 - forbidden sign + no longer boots

Hi,
After updating to 10.6.2 my MBP 13 no longer boots it hangs in the startup gray screen with a forbidden sign instead of the Apple logo and the spinner spinning forever...
Any ideas ?
Jorge.

Attempting a boot with cmd-v shows:
Lots of:
Can't load kext com.apple.blahblahblah
Kext blahblahblah not found
Failed to load kext blahblahblah (error 0xdc00800e)
Can't load kext blahblahblah - failed to resolve library dependencies.
(same messages repeted many times, for different kexts)
Couldn't alloc class this
Couldn't alloc class that
Still waiting for root device
Still waiting for root device
Still waiting for root device
Still waiting for root device
Still waiting for root device
Still waiting for root device
Jorge.

Similar Messages

  • When opening my MBP, all that shows is the apple logo and the forbidden sign

    Hello everyone,
    So I'm on a 2011 MPB using 10.9.5.
    I've closed it after using two nights ago, and when I came back home the day after and tried opening it, all that appeared was an alternation between the apple logo and the forbidden sign (here it is : http://stickeramoi.com/3447-3369-large/autocollant-panneau-interdit-interdiction .jpg)
    I've tried repairing the disk but that failed.
    Tried also re-installing OS X on it but that took about 17 hours (which is ridiculous) so I've cancelled that and instead, tried restoring a Time Machine save.
    After it finished restoring the latest backup, I'm still faced with the same problem. It just won't boot.
    Thank you for your time and help,

    Yeah well I think I've tried about everything that I found out there.
    From console commands to installing Lion through Internet recovery...That's it, I give up
    Will take it for replacement tomorrow.
    Thank you

  • Ibook doesn´t start (forbidden sign) after upgrade 10.0.4 to Jaguar

    It´s appear a forbidden sign when the ibook start after install jaguar since 10.04.I´ve reseted pram open firmware,shift key etc..

    You're Again Welcome juanelo!
    "...install the Jaguar cd from Classic-9.2.2..."
    So you were booted into OS 9.2.2, not running Classic through OS X, right?
    Running Classic, is different than starting up in OS 9.2.2.
    "...updatint the firmware."
    Did you download and install, the Firmware Update, that was previously linked to?
    And you did that, after you installed Jaguar 10.2.x?
    "...using to upgrade to Panther the Install Cd,"
    Do the discs look exactly like THESE, and do not say Upgrade, CPU Drop-in DVD, or "This software is part of a hardware bundle purchase - not to be sold seperately." on them?
    "...added 512 mg of memory."
    Are you sure this is compatible, working RAM, and is it new, or used?
    "Sorry about the free disk space.I don´t want classic now just Panther."
    So if the Hard Drive is 6GB, and it is empty now, did you Erase the drive?
    ali b

  • I can not pull any file from mediathek to playlist since iTunes 10.5 . I get an forbidden sign in black. I see my ipod on itunes but can not pull (iOS 5.0) (ipod touch). On other PC all is working.

    I can not pull any file from mediathek to playlist since iTunes 10.5 . I get an forbidden sign in black. I see my ipod on itunes but can not pull (iOS 5.0) (ipod touch). And I can not synchronise...
    On other PC all is working.

    Tried to turn Avast off but the problem still there.
    I created a Playlist to my iphone using the musics already on it and the next try i could add new files to this playlist (and to the iphone) but if I try to add it the way I used to do (directly to the iphone) I still get the prohibited symbol.
    This is ok, since I can use it the way I want (so far, i didn´t try yet to add other files like PDF or CBR files) and find a way to add the files i want, but I cannot help to think how wierd this is...
    I just don´t like the way apple choosed to make possible transfer files to my device. I really like my iphone but my friends with Nokia and Android have an easier life on that matter...

  • Installed new hdd in MacBook Air 2008, question folder and forbidden sign in screen, what to do?

    Hello
    I installed new hard drive to my MacBook Air 2008 and when I try to install lion/snow leopard/ mavericks it won't show up the disk. I can't find the hard drive.
    I don't now what to do. I tried everything. I spoke with a guy in macsupport here in Sweden and he said I have to buy snow leopard and install it from the original dvd in order for computer to format. My computer is old like I said its from 2008. I've never update it or upgrade. This is first time. It laid in storage for three years so I decide it to use it again but hdd was damaged so I had to change it, and now all I get is flashing question folder and forbidden sign, you know the sign for auto traffic.
    Is it true that the only way to restore or to find the new hdd or to boot the question mark and forbidden sign marks by installing osx from its original dvd or buy snow leopard?
    After I spoke with the guy from Mac support, I got little suspicious so I spoke to another one and he told me all I need to do is format hdd with the help of a sata hdd cable with help of another macbook and then I was good to go.
    What do u think?
    Should I buy snow leopard or can I burn it from my sister computer?

    I first would try Target Disk Mode to format and install an OSX on the new storage drive.
    http://support.apple.com/kb/ht1661
    You will need a OSX source that is compatible with the MBA.  If you have the original, use that.
    Ciao.

  • Mac Pro + 10.6.8 - gray screen with a forbidden sign & "still waiting for root device"

    Hi everyone,
    I've a Mac Pro Early 2008 Dual Xeon which runs 10.6.8  version of OS X (Snow Leopard)
    After a recent reboot the system won't come up, it just hangs displaying a gray screen with a forbidden sign instead and the gray spinner spinning forever...
    I have tried: http://support.apple.com/kb/TS2570
    1) Disconnect, test peripheral devices and network cables ---> nothing
    2) Perform a Safe Boot ---> I got this screen
    3) Reset the NVRAM / PRAM ---> Nothing
    4) Start from your Mac OS X Install disc; use Disk Utility
    I have tried to boot from both installed SuperDrive holding the C key, but nothing! The Mac doesn't start from CD (very strange!!!) 
    5) Check your cables and power source
    They are OK, but nothing!
    6) Remove third-party RAM and internal hardware
    No third-party RAM is installed...
    7) Perform an Archive and Install installation of Mac OS X or
    Perform an Erase and Install installation of Mac OS X as a last resort
    I can't boot from installation disc....
    Any other idea?

    Guessing that your hard drive has left the building or your OS X system has. I would start by replacing OS X, if you can:
    Clean Install of Snow Leopard
         1. Boot the computer using the Snow Leopard Installer Disc.  Insert the disc into the
             optical drive and restart the computer.  After the chime press and hold down the
             "C" key.  Release the key when you see a small spinning gear appear below the
             dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, set the format type to Mac
             OS Extended (Journaled, if supported), then click on the Partition button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. Be sure you configure your initial admin account with the exact same
             username and password that you used on your old drive. After you finish Setup
             Assistant will complete the installation after which you will be running a fresh
             install of OS X.  You can now begin the update process by opening Software
             Update and installing all recommended updates to bring your installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • Mountain Lion unable to start forbidden sign Harddrive problem

    Hi guys,
    so I have a MacBook Pro 17" with the newest Mountain Lion update and Bootcamp Windows 7. When I start the Mac, Mountain Lion shows me the forbidden sign, while still having this loading sign working but nothing happens and Windows shows me the bluescreen with the error code: "0x0000007B"
    When I try to start the recovery in OS X the same happens (nothing...) and in Windows recovery the mouse and keyboard suddenly stop working so that I can't do anything. Additional to that I figured out that Windows has a problem with CLASSPNP.sys meaning that the problem lies in the hard drive. Now my question is since the mouse and keyboard stop working in Windows how can I reinstall the drivers in OS X?

    Hi, this has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.
    Also, turn off IPv6:
    System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
    Or whatever Interface you use.
    http://support.apple.com/kb/HT2712

  • Forbidden sign on start-up.

    Hi everyone!
    When my powerbook starts up, it arrives to the apple logo with the spinning sign. But after a while, the apple logo changes to a forbidden sign!!! What does it mean ?
    So I thought it is the hd problem. So I remove it. But the forbidden sign goes back.
    I think booting from CD, the machine should read the disk utility even is Hd is removed. Removing the HD should not change the CD start-up process , no ? it is safe I think.
    Thanks in advance.
    Alain
    Powerbook Ti 400   Mac OS X (10.4)  

    Here's Apple's info on the problem, you can try following the links:
    http://docs.info.apple.com/article.html?artnum=106805
    With the HD installed, try doing a "safe boot", by holding the shift key down until the login screen appears. If it works, do a normal restart and report back with the results.
    http://docs.info.apple.com/article.html?artnum=107393

  • Power Mac G4 MDD Dual 1.25 - forbidden sign at bootup/PRAM

    Hello everyone,
    I am the proud owner of a couple of MMD G4s (the Dual 1.25 & the Dual 1.42).
    My dual 1.25 (fresh Leopard install from two weeks ago) is giving me the forbidden sign at startup.
    I did use the Leopard Install DVD to repare all the authorizations but it didn't make any difference.
    The good news is that if I restart the machine and do a single PRAM reset, the machine boots beautifully into 10.5.8.
    However, I'm afraid of damaging the motherboard by always booting with a PRAM reset so I'd like to know if anyone has encountered this issue ?
    (maybe the battery is too old ? It's a replacement Newer Tech from OWC from 2 years ago).
    Thanks !
    Pierre André.

    Hi Pierre, it does sound like the Pram Battery, it's life of 4 or so years can be drastically shortened if ever the Mac is without AC power.
    Try holding the Option/alt key down at bootup & select the boot drive to se if that works.

  • The plus sign no longer saves to favorites

    the plus sign no longer saves to favorites but to reading list
    Last week it was OK, this week it isn't.
    I'm sure that it is something simple.
    Any help?

    The '''Add Google Search To New Tab Page''' add-on isn't needed any longer; might be related to your problem.
    A feature like that was added to Firefox a few versions ago.

  • Discounts for Students or signing for longer periods (eg. 1 year).

    Hello there, I am a German student, really appreciate using Spotify it is. Are there any planes or possibilities out there to get a discount as a student or for signing for longer periods - lets say about one year or so.

    
    Hello, I think this is only interesting for the German-Spotify User,
    The Spotify User in the UK have a Student-Program, I Think it is the time for a Studentprogram in Germany :)
    also I Write it in German :)
    Also, Hallo :)
    Ich habe per Twitter vor längerer Zeit mitbekommen dass es in den UK eine Studenten-Option gibt, so das Studenten und Schüler nur 50% bezahlen. Ich hatte die Idee eine Facebook seite zu erstellen und dort Leute zu „sammeln“ um Spotify Deutschland zu zeigen dass an so etwas Interesse besteht ;)
    Wenn ihr mir helfen wollt, klickt einfach auf den Link, Liked die Seite & teilt es mit euren Freunden :)
    https://www.facebook.com/pages/Spotify-Deutschland-Sch%C3%BClerStudenten-Tarif/322808231129805

  • Why: finger & forbidden sign - then unable to use my mouse...?

    I had a month subscription to Adobe Photoshop CS6.
    My CS6 closed multiple times - I finally removed the program and removed CS3 as well, which I thought could be interfering with it. Any ideas why this would have happened and what to do to prevent it when I re-subscribe to the Annual Photoshop?
    Thanks!

    Can you please elaborate your question? I don't quite seem to understand it.
    Please follow these instructions before you post to get better & quicker responses: http://forums.adobe.com/thread/419981?tstart=0

  • Prohibitive sign appears when booting Lion from USB flash and DVD

    Hi There
    I created both a bootable DVD and a USB drive from the Lion download. However I just tried booting my macbook from the DVD and got the "prohibitive sign - ie the circle with a line through it" it was the same when trying the USB flash drive as well. any idea's gratefully appreciated ! BTW my Macbook is a intel dual core.
    I'm currently installing Lion on my Macbook pro from the downloaded image OK so don't think the image is damaged.
    rgs
    Colin

    when you say your MBP is dual core, do you mean core 2duo or core duo?
    http://macs.about.com/od/macoperatingsystems/qt/Mac-Os-X-Lion-Preview-Mac-Os-X-L ion-Minimum-Requirements.htm
    and
    http://www.apple.com/macosx/specs.html

  • How do i retrieve file vault protected files from an external hard disk that used to be my mbp's hard drive? the hard disk got corrupted and will no longer boot. I put it in an enclosure and attempted to copy my files but failed because of FV encryption.

    This external hard disk used to serve as the main drive of my mbp. It got corrupted and the OSX would no longer load. I upgraded to a 500gb hd and used the old hd as an external drive. I tried to copy my files but i could not access them because of the filevault encryption. 110gb of hd space appears as used which means that my files are still in the drive. Is there a way to retrieve these files? thanks

    According to your post, you're using Leopard, so FileVault only encrypts your user folder (unlike Lion). On the mounted external drive, in your user folder, you should see a file called username.sparsebundle, with username being your user name. Double-click that file to open it and it should prompt you for a password. Type in your password and the file will mount as a volume in Finder. You should be able to copy all of your files over.

  • MBP 15 2.66Ghz removable battery... long time to charge (4 to 5 hours)?

    My MBP (early 2009) model with removable battery, just bought refurbished from Apple takes between 4 to 5 hours to fully charge from low battery while suspended (sleep).
    Battery shows as healthy condition Normal Capacity shows as 4519 mAh. Cycles shows 3.
    Is this normal behavior?
    Tia,
    David

    I just purchased a refurbished unit and am having this same issue. Battery life seems okay but it takes around five hours to charge. My previous Macbook Pro only took 2 hours max.
    The specs on my machine is 2.4ghz, 2 gig, 250 GB HD.
    If I find something out I will let you know.
    Aaron

Maybe you are looking for

  • TFS says {oldaccount} is not a member of the Team Foundation Valid Users group, but I am

    I'm trying to check in changes to TFS using VS2013. When I hit the submit button, TFS returns the following error, "TF14002: The identity {domain} \ {oldaccount} is not a member of the Team Foundation Valid Users group." Background: my account name h

  • Wi-Fi not working on MSI GT60

    Hello All, For last two weeks, wi-fi has not been working on my windows 8 machine. Wi-Fi switch is a software based switch on my machine. It is ON when I start the machine. But it does not list any wi-fi networks (I know the existence of the networks

  • Fonts not displaying on some computers

    I created a document in Microsoft Publisher on my laptop (running Windows XP SP2) and created a .pdf using the "Save as postscript" funcion and Acrobat Distiller (5.0) I emailed it to our webmaster who put it up on our webpage. Now, when I go to view

  • Folder with exclamation point

    My nano has been showing this error msg for days. I have tried all of the 5 steps on the support web page to no avail. I have even taken my ipod in to my local apple store where they apparantly "fixed" the problem. The guy said that I would probably

  • Crystal Report For SAP B1 2007 A - Files required

    Dear all, From where I can download the CRRuntime_12_mlb.msi   (CR 2008) SAPCrystalSetup   (CR 1.0.0.0 setup) files. I have used the following link but not able to download these files. https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webconten