MBP 13" (2010 model) will not boot from Restore DVD!

I just upgraded the HDD on my 13" MBP to the 1TB Toshiba MK1059GSM. The MBP is 3 weeks old. Upgrade went fine in terms of the process. However, when I insert the OS restore DVD that came with the machine and restart (using ALT/OPTION) and select to boot from the DVD, the Apple logo appears with the spinner and the system just stays like this. I can hear the DVD spinning but nothing elese ever happens! Any ideas as to what could be wrong? Could it be that this new Toshiba HDD is not compatible and the DVD does not have a driver for it?

+*Could it be that this new Toshiba HDD is not compatible and the DVD does not have a driver for it?*+
SATA drives use a standard interface and no additional drivers are necessary. That's not to say that the drive itself can't be faulty. As has been suggested, try removing the drive and see if you can boot from the DVD. If that works, you can be pretty sure there may be a problem with your new hard drive. Hopefully you kept your original drive so you can always put that back in. Faulty hardware can always be frustrating because you never think that's the problem. Let us know how you make out.

Similar Messages

Wiped macbook pro will not boot from install DVD

I recently purchased an older MacBook Pro that came with the OS system wiped but it did have the original Install DVDs. The computer will not boot from the DVD. I have booted holding down the C key and nothing happens. I have booted holding down the Option key and it shows the Install DVD and I select this and nothing happens.
How do I get it to open up the Utilities from the DVD to install the operating system?

It could be a problem with the optical drive, but also may be due to the DVD's being for a different model.
Exactly which MBP do you have, and what serial numbers are on the discs ?.

IBook G3 will not boot from CD/DVD

Ok, I have an iBook G3.
I was restoring it to factory with the Software Restore disks which came with the unit as I was planning to move on to a new unit.. But there was a power cut in the middle of the process and the unit shut off. Now, it does not recognise a HD when booting holding option.
It also will not boot from any CD/DVD other than the Apple HW Test disk provided with the unit.. All other disks spin up and then get ejected, on the odd occasion it does not eject, it boots to a icon of a floppy diskette with a flashing ? (Saying that, I did manage to get it to load from the restore disk 1 once, but it just said it could not mount the image file)
The HW test disk returns no problems
I have reset PRAM multiple times, and reset nvram and all in Open Firmware. I have also reset PMU as a last resort, but no luck
Any ideas?

Hi, and welcome to Apple Discussions.
Do you have DiskWarrior, maybe?

Will not boot from CD/DVD drive even with "C" key pressed

I have a G4 with a hard drive that is (apparently) dead. I would like to boot off the CD drive, but that does not work. I press "C", then turn the power on, continue holding down the "C" key, and the hard drive just makes some clicking noises for about 20-30 seconds, then gives up. The computer will not boot at all. Same thing happens when holding down "Option" instead of "C"
Why would the computer not boot off the CD drive?
Any tips would be greatly appreciated. Thanks!
Mike
Mac G4 400 MHz Mac OS X (10.3.9)

Hi, Michael!
If this topic is now "history", please close it out as "answered". If you still have a problem with the AGP G4, still close this topic out and post over in the G4 section and we'll happily help you out over there.
Regards,
Gary

Satellite C655D-S5303 will not boot from cd/dvd drive

I have already set the boot order in the BIOS to boot from cd/dvd drive first and it still goes straight to the HDD and starts Windows 7. I searched for this problem and found some people saying to switch it to CSM boot or disable secure boot but none of these options are available in the BIOS. I have it set to normal boot instead of fast so thats not the problem. Can anyone help me here? I am trying to reformat and reinstall Windows 7. I know the Windows 7 installation disk I have is good because I have used it in another computer and the cd/dvd drive works fine. I just can't get it to boot from the cd/dvd drive before the HDD.
Solved!
Go to Solution.

Satellite C655D-S5303
Downloads here.
Try setting the HDD to lowest boot priority. See Dave's solution in this message.
It's certainly easier to restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. All the drivers and utilities are preinstalled in the proper order. Windows is preactivated.
If you failed to burn recovery discs, you can obtain recovery media from Toshiba. Scroll down to Get Recovery Media here
For instructions, see the section Restoring from recovery DVDs/media, which begins on p. 76 of the User's Guide.
Satellite/Satellite Pro C600 Series User’s Guide
If you want Windows 7 Professional, upgrading takes only minutes.
Upgrade to another edition of Windows 7 by using Windows Anytime Upgrade
-Jerry

Satellite C655D-S5303 will not boot from cd/dvd drive

I have already set the boot order in the BIOS to boot from cd/dvd drive first and it still goes straight to the HDD and starts Windows 7. I searched for this problem and found some people saying to switch it to CSM boot or disable secure boot but none of these options are available in the BIOS. I have it set to normal boot instead of fast so thats not the problem. Can anyone help me here? I am trying to reformat and reinstall Windows 7. I know the Windows 7 installation disk I have is good because I have used it in another computer and the cd/dvd drive works fine. I just can't get it to boot from the cd/dvd drive before the HDD.

Satellite C655D-S5303
Downloads here.
Try setting the HDD to lowest boot priority. See Dave's solution in this message.
It's certainly easier to restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. All the drivers and utilities are preinstalled in the proper order. Windows is preactivated.
If you failed to burn recovery discs, you can obtain recovery media from Toshiba. Scroll down to Get Recovery Media here
For instructions, see the section Restoring from recovery DVDs/media, which begins on p. 76 of the User's Guide.
Satellite/Satellite Pro C600 Series User’s Guide
If you want Windows 7 Professional, upgrading takes only minutes.
Upgrade to another edition of Windows 7 by using Windows Anytime Upgrade

New hard drive. Will not boot from install dvd.

Earlier this week, I dropped my computer.
It was probably a 3 foot fall.
Computer froze, so I restarted and got the flashing folder with question mark.
Started in internet recovery, and disk utility confirmed that I had killed my hard drive.
Got a new hard drive and installed. Started in internet recovery, formatted hard drive. Disk utility says it's good to go.
Was given the option to install Mavericks, but keep getting an error message.
Attempted to restart from install dvd that came with the MBP. Tried every startup shortcut there is.
Optical drive recognizes the disk, but I always get stuck on the gray screen with the wheel.
Reset PRAM. Reset SMC. Same problems. I do not have access to another mac or a PC with admin rights.
I'd rather not brave the Apple Store this weekend in the snow in a town that never gets snow (people drive poorly on a good day!).
Any tips?
Got the MBP in 2010, new. Was running mountain lion when I dropped it.
Thanks!

Yiou can't use Internet recovery on a 2010 Mac notebook to install any version of OS X on it. That is why you are getting that error. You have to use the original System reinstall discs that came with it to install OS X on a new drive or use the OS X reinstall disk to restore from a time machine backup.
Since your system doesn't seem to want to completely boot from that disc you should try an external DVD drive that connects by USB port as the built in superdrives are known to fail or partially fail at any time. Don't buy an Apple external Superdrive as they only work on Mac computer that did not originally come with a built in DVD drive. Any Brand external DVD drive will work on your Mac except Apples own external DVD drive.

Restore Disc Will Not Boot From External DVD Drive

I am using an original MacBook Pro that I decided could use a good restore, and started to clean house. The optical drive is broken, so I am using an external USB drive. I inserted the restore disc that came with the computer (It has OS X 10.4.6 on it), erased my HD, and proceeded to install Tiger. However, setup froze while installing Photobooth, and I was forced to shut down the computer.
I'm trying to get my Macbook Pro to boot from the restore disc that came with it so I can try setup again, but it won't work. If I hold C during the boot, I get a flashing folder with a question mark over it. If I hold option, I get a cursor, but just a blank, gray screen. In both instances, the external DVD drive is active and reading the disc, but I'm not getting any results on the screen. I've also reset PRAM.
If I can just get my computer to boot from the disc, I should be able to get back on track. Thanks.

When I press option during boot, nothing happens. Just a gray screen and cursor, like I described above. I haven't been able to test the external drive yet on another mac to see if it is bootable because I can't find the other computer's boot disc at the moment, but I'll try later with something else.
I have been able to access the drive through Target Disk mode successfully though. Is there something in particular I should do with the files? The folders are:
Applications
cores
dev
etc
Library
OSInstall.mpkg.998YblbM
System
tmp
Users
var
Volumes

Imac g4 will not boot from restore cd

hi there everyone today i tryed booting my imac g4 into the mac os 9 restore for my imac and it loads up to the box with the bar and you can move the mouse and then you see a bar that say's starting mac os 9 and then you wait abit and then the screen go's black with a mouse on the screen and you move it but no mac os has booted i do not know what this is i have reset the nvram and pram but still nothing plz help i want os 9 on my imac so i can play my games thank you

It may need a new PRAM battery. Especially if you are sure you have the discs that came with the computer. No other discs except newer Apple retail discs will work. Retail means not OEM, and not too new to run. 700 Mhz, and 800 Mhz with Superdrive iMac G4s are the only ones that will boot into Mac OS 9 using their prebundled OS 9 discs. The combo drive 800 Mhz model can only use OS 9 in Classic. Classic is only available up to Mac OS X 10.4.11, and under 1 GHz models can use up to 10.4.6 retail, and 10.4.11 combo PowerPC to maximize their operating system. 1 GHz and higher can use 10.5.6 retail and upgrade up to 10.5.8 combo, but lose Classic on the same partition if taken up to 10.5 and above.

Flat Screen imac iMac won't boot up, will not boot from DVD

My 24" imac flat screen will not boot. I only get a blank gray/white screen. Reset the PRAM and tried to boot from the DVD. I held the C key down when I powered on but the system will not boot from the DVD. If I wait long enough, the DVD will eventually be ejected. I have had HD issues and Disk Warrior indicated that the drive was damaged. Will a dead hard drive cause the system to not boot from the DVD? Is there any way to get the system to boot from my DVD?

Hello PMcDer,
Welcome to Apple Discussions!
By what you are describing you're correct in believing your drive is probably gone. The sad news... if Disk utility can no longer see the drive, your ability to retrieve any data off of it is getting slim.
There are a couple of options for data retrieval.
1. If you still have Apple Care have them fix it. But make sure they know that you do not have a backup.
2. If you do not have Apple Care, have an Authorized Apple Tech replace the drive and make sure that they will give you back the old drive. This may prove to be a challenge. Or you can replace the drive yourself. It is not easy for some but take your time and you'll have no problems. Lots of youtube videos on this as well as on-line tutorials.
3. You could try a Hard Disk Utility program like Disk Warrior to see if it can help, but it's not free.
4. You could pay someone big bucks for Data recovery in order to get the data of the drive for you.
If you decided to do the HDD swap yourself. You could purchase a 3.5" firewire enclosure that you could put your old drive into once you do the swap. Plug it into the iMac and prey that it recognizes it. Then "MAYBE" you could copy the data over to the new drive, but that is a stretch.

I have a mid-2010 27" Quad Core i5 iMac running 10.8.3. Startup disk recognizes the primary hard drive as a startup volume but will not boot from it. Have tried zapping PRAM, ran disk utility. No errors reported Any thoughts?

I have a mid-2010 27" Quad Core i5 iMac running 10.8.3. Startup disk recognizes the primary hard drive as a startup volume but will not boot from it. Have tried zapping PRAM, ran disk utility. No errors reported Any thoughts?

My bad Eric. The startup preference recognizes the primary as a 10.8.3 startup volume but when u select it the system does not boot. I can only boot from my external backup drive

Mid-2009 MacBook Pro sees internal SATA hard drive, but will not boot from or format

I inherited a Mid-2009 MacBook Pro (15-inch, 2.53 GHz model) with a very strange issue.
It first presented itself as not being able to boot from the internal SATA hard drive that came with the computer. Nothing I tried could get it to boot, so I assumed the file system was corrupted beyond repair and booted from a CD to try to format the drive. Disk Utility on the CD would not format the drive, giving me strange error messages like "Unable to write to the last block of the device".
At this point I figured the drive itself must be toast, so I pulled it out and put another known-good SATA hard drive in, booted from CD, and attempted to format. Again, same error messages and an unsuccesful format.
So I had the bright idea of formatting one of the drives in an external enclosure and then putting it in the MBP to see if OS X would even install. No dice. Get a cryptic error message before installation even begins.
So I installed OS X on the drive in the external enclosure and put it in the MBP, and it attempts to boot, but never goes anywhere.
So to sum up, the symptoms I'm seeing:
MacBook Pro CAN see internal SATA hard drives.
MacBook Pro WILL NOT boot from any internal SATA hard drive and cannot format or install OS X to any internal SATA hard drive.
MacBook Pro WILL boot from any CD or external device and seems to work properly otherwise.
At this point I'm thinking it's one of two things: the hard drive ribbon cable or the SATA controller on the logic board.
Since the MacBook Pro seems to work completely fine other than this one issue, and will boot properly from both external devices and the CD (also a SATA device), I'm thinking and hoping that it's just the hard drive ribbon cable. From my searches online, I've heard that this batch of MacBook Pros is known to have issues with the hard drive ribbon cable, but it seems in most cases this manifests itself by the Mac not being able to see a drive at all.
I've done quite a bit of troubleshooting to get to this point, but right now I'm just looking for any feedback at all. Specifically I'd love to know a way I can easily test to see whether it's the logic board or the cable.

UPDATE: An interesting development!
I just tried a third known-good SATA hard drive, one which I believe supports SATA I only (but I'm not sure), and unlike the other drives that the Mac sees but cannot properly interact with, the Mac can't even see this one when I put it inside.
Frustrating as this may be, I believe I'm actually getting closer to a solution since my symptoms now appear to be closely aligned with people having SATA ribbon cable issues.
Onward!

IMac will not boot from any mode except Target Disk

I have an Early 2008 Penryn iMac 24" MB398LL/A running OS X 10.7.4 (see specs below) that will not boot from ANY mode, It also has several strange vertical bars from top to bottom on the screen. They are about 10 px wide, with some pixels empty and looks a bit like a barcode if you squint at it.
I have tried Safe Boot, Force Boot, DVD Boot, FireWire/USB Boot, and it always gets to the same point. It gets to the apple screen with the spinning gear and then after about 8 seconds it freezes. The only way it works at all is in Target Disk Mode. It pops right up on my Macbook Pro and I was able to grab all my info!
I have run Disc Utilities and Tech Tool on it many times from my MBP and it passes every test.
I reformatted the HD and installed 10.7 again, it still freezes up at the same point.
I have tried using Single User mode and every time have had to run /sbin/fsck -fy twice because it always says the disk is ok but it was modified on the first pass.
I thought maybe it had a bad video card or logic board but and I ran the Apple Hardware Test on many occasions and it always passes. Recently I was told about Loop Mode and just completed running the AHT for just over 30 hours without any errors at all.
UPDATE...
Strange Part… I tried installing Mountain Lion in Target Disk Mode and everything went smoothly. When it restarted on its own the lines on the screen were gone for the moment, but the Mac still freezes up on the spinning gear and immediately restarts on its own. I have run every thing listed above on it and still nothing. Sometimes the lines reappear then in two more starts they are gone.
I did manage to have it start one time got a copy of the the error report (its at the bottom too) The Mac ran for at least 30 minutes with no problems, then the screen went crazy a few seconds and it became unresponsive. The mouse moved but that was all it could do. Now my iMac continually restarts itself, I don't have any more ideas, HELP!
Specs...
The iMac "Core 2 Duo" 3.06 24-Inch Aluminum (Early 2008/Penryn) features a 3.06 GHz Intel "Core 2 Duo" processor (E8435), with two independent processor "cores" on a single silicon chip, a 6 MB shared level 2 cache, a 1066 MHz system bus, 2 GB of RAM (800 MHz DDR2 SDRAM, PC2-6400), a 500 GB (7200 RPM) Serial ATA hard drive, a vertically-mounted slot-loading DVD±R DL "SuperDrive", NVIDIA GeForce 8800 GS graphics acceleration with 512 MB of GDDR3 memory, a built-in iSight video camera, and built-in stereo speakers underneath the 24" glossy TFT Active Matrix LCD (1920x1200 native) display.
Error Report…
Sat Sep 1 17:13:12 2012
panic(cpu 0 caller 0xffffff801a4b7b95): Kernel trap at 0xffffff7f9bab8654, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000010, CR3: 0x0000000011803000, CR4: 0x0000000000000660
RAX: 0x0000000000000001, RBX: 0xffffff8050e00000, RCX: 0xffffff801aa8eb00, RDX: 0xffffff80602dba38
RSP: 0xffffff80602dbb60, RBP: 0xffffff80602dbb60, RSI: 0x0000000000000000, RDI: 0x0000000000000000
R8: 0x0000000000000000, R9: 0x00000000000000ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0xffffff8050e00000, R13: 0x0000000000000000, R14: 0x0000000000000002, R15: 0x0000000000000000
RFL: 0x0000000000010246, RIP: 0xffffff7f9bab8654, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000010, Error code: 0x0000000000000000, Fault CPU: 0x0

Here is the complete error log...
Sat Sep 1 17:13:12 2012
panic(cpu 0 caller 0xffffff801a4b7b95): Kernel trap at 0xffffff7f9bab8654, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000010, CR3: 0x0000000011803000, CR4: 0x0000000000000660
RAX: 0x0000000000000001, RBX: 0xffffff8050e00000, RCX: 0xffffff801aa8eb00, RDX: 0xffffff80602dba38
RSP: 0xffffff80602dbb60, RBP: 0xffffff80602dbb60, RSI: 0x0000000000000000, RDI: 0x0000000000000000
R8: 0x0000000000000000, R9: 0x00000000000000ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0xffffff8050e00000, R13: 0x0000000000000000, R14: 0x0000000000000002, R15: 0x0000000000000000
RFL: 0x0000000000010246, RIP: 0xffffff7f9bab8654, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000010, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80602db800 : 0xffffff801a41d5f6
0xffffff80602db870 : 0xffffff801a4b7b95
0xffffff80602dba40 : 0xffffff801a4ce4ad
0xffffff80602dba60 : 0xffffff7f9bab8654
0xffffff80602dbb60 : 0xffffff7f9baa218c
0xffffff80602dbbb0 : 0xffffff7f9baa20e2
0xffffff80602dbbd0 : 0xffffff7f9ba73554
0xffffff80602dbc00 : 0xffffff7f9aa8d470
0xffffff80602dbc40 : 0xffffff7f9aa8d3df
0xffffff80602dbc60 : 0xffffff7f9aa926ec
0xffffff80602dbcf0 : 0xffffff7f9aa8af20
0xffffff80602dbd20 : 0xffffff7f9aadacc7
0xffffff80602dbd70 : 0xffffff801a833b9b
0xffffff80602dbdc0 : 0xffffff801a862d57
0xffffff80602dbe30 : 0xffffff801a497cef
0xffffff80602dbe80 : 0xffffff801a420abd
0xffffff80602dbeb0 : 0xffffff801a410448
0xffffff80602dbf00 : 0xffffff801a4195fb
0xffffff80602dbf70 : 0xffffff801a4a5ad6
0xffffff80602dbfb0 : 0xffffff801a4ced13
      Kernel Extensions in backtrace:
         com.apple.iokit.IOGraphicsFamily(2.3.4)[2600903C-EEDE-321B-A023-169DC9B26EA6]@0 xffffff7f9aa81000->0xffffff7f9aab8fff
            dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9aa4d000
         com.apple.NVDAResman(8.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f9aad8 000->0xffffff7f9addafff
            dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9aa4d000
            dependency: com.apple.iokit.IONDRVSupport(2.3.4)[99CA4184-8D92-31B2-8726-46139E8E3DFF]@0xff ffff7f9aac4000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[2600903C-EEDE-321B-A023-169DC9B26EA6]@0 xffffff7f9aa81000
         com.apple.GeForce(8.0)[4B9BE287-5251-398E-96B0-BB16C9BFB2D9]@0xffffff7f9ba72000 ->0xffffff7f9bb34fff
            dependency: com.apple.NVDAResman(8.0.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f9aa d8000
            dependency: com.apple.iokit.IONDRVSupport(2.3.4)[99CA4184-8D92-31B2-8726-46139E8E3DFF]@0xff ffff7f9aac4000
            dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9aa4d000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[2600903C-EEDE-321B-A023-169DC9B26EA6]@0 xffffff7f9aa81000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
12B19
Kernel version:
Darwin Kernel Version 12.1.0: Tue Aug 14 13:29:55 PDT 2012; root:xnu-2050.9.2~1/RELEASE_X86_64
Kernel UUID: 3005059E-270B-3B9F-940D-7A66C05DDC9D
Kernel slide:     0x000000001a200000
Kernel text base: 0xffffff801a400000
System model name: iMac8,1 (Mac-F227BEC8)
System uptime in nanoseconds: 26349024446
last loaded kext at 22534854703: com.apple.driver.AppleHDAHardwareConfigDriver          2.3.0f2 (addr 0xffffff7f9c489000, size 12288)
loaded kexts:
com.apple.driver.AppleHDAHardwareConfigDriver          2.3.0f2
com.apple.driver.AppleHDA          2.3.0f2
com.apple.driver.AppleTyMCEDriver          1.0.2d2
com.apple.filesystems.autofs          3.0
com.apple.iokit.IOBluetoothSerialManager          4.0.9f8
com.apple.iokit.IOBluetoothUSBDFU          4.0.9f8
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleMuxControl          3.2.6
com.apple.driver.AppleBacklight          170.2.3
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.driver.AppleMCCSControl          1.0.33
com.apple.GeForce          8.0.0
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.ApplePolicyControl          3.2.6
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.AppleIRController          320.15
com.apple.iokit.SCSITaskUserClient          3.5.1
com.apple.driver.AppleFileSystemDriver          3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.2.1
com.apple.driver.AppleFWOHCI          4.9.5
com.apple.driver.AppleUSBHub          5.1.6
com.apple.driver.AirPortBrcm43224          600.36.17
com.apple.iokit.AppleYukon2          3.2.3b1
com.apple.driver.AppleAHCIPort          2.4.0
com.apple.driver.AppleIntelPIIXATA          2.5.1
com.apple.driver.AppleUSBEHCI          5.1.5
com.apple.driver.AppleUSBUHCI          5.1.5
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleACPIButtons          1.6
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.6
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.driver.DspFuncLib          2.3.0f2
com.apple.iokit.IOAudioFamily          1.8.9fc9
com.apple.kext.OSvKernDSPLib          1.6
com.apple.kext.triggers          1.0
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.nvidia.nv50hal          8.0.0
com.apple.NVDAResman          8.0.0
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.AppleHDAController          2.3.0f2
com.apple.iokit.IOHDAFamily          2.3.0f2
com.apple.iokit.IOSurface          86.0.2
com.apple.iokit.IOBluetoothFamily          4.0.9f8
com.apple.driver.AppleGraphicsControl          3.2.6
com.apple.iokit.IONDRVSupport          2.3.4
com.apple.iokit.IOGraphicsFamily          2.3.4
com.apple.driver.AppleSMC          3.1.3d11
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.IOPlatformPluginFamily          5.2.0d16
com.apple.iokit.IOUSBHIDDriver          5.0.0
com.apple.driver.AppleUSBMergeNub          5.1.5
com.apple.driver.AppleUSBComposite          5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.1
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOATAPIProtocolTransport          3.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IOUSBUserClient          5.0.0
com.apple.iokit.IO80211Family          500.15
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOAHCIFamily          2.2.0
com.apple.iokit.IOATAFamily          2.5.1
com.apple.iokit.IOUSBFamily          5.1.6
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.iokit.IOHIDFamily          1.8.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          344
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.6
com.apple.iokit.IOPCIFamily          2.7
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
Model: iMac8,1, BootROM IM81.00C1.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 2 GB, SMC 1.30f1
Graphics: NVIDIA GeForce 8800 GS, NVIDIA GeForce 8800 GS, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 800 MHz, 0x2C00000000000000, 0x38485446313238363448445A2D3830304531
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 800 MHz, 0x2C00000000000000, 0x38485446313238363448445A2D3830304531
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.131.36.16)
Bluetooth: Version 4.0.9f8 10405, 2 service, 18 devices, 1 incoming serial ports
Serial ATA Device: WDC WD5000AAKS-40YGA1, 500.11 GB
Parallel ATA Device: MATSHITADVD-R   UJ-875
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd400000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x820f, 0x1a110000 / 5
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2
USB Device: Hub in Apple Extended USB Keyboard, apple_vendor_id, 0x1002, 0x1d100000 / 2
USB Device: Trackball, 0x046d (Logitech Inc.), 0xc404, 0x1d120000 / 4
USB Device: Apple Extended USB Keyboard, apple_vendor_id, 0x0204, 0x1d110000 / 3

Optical drive trashed and MB Pro will not boot from USB image

Hello,
New here but I have searched and tried all I know to get this MBP working right again. My disk drive is trashed and has been for some time now, this is why I have a bootable version of Snow Leopard on an 8G flash drive. When my MBP began acting funny recently and I went to disk utility to verify permissions and the disk. Both failed = must boot from disk to repair, thus my issue. For some reason by MBP will not boot from the usb image I have used previously??? Pressing C or Option during startup does not work. If I press Option, I only get the harddrive option, C yields nothing and the computer boots normally.
Please!! let me know how / what you would do to resolve this. I don't understand why I have previously been able to boot from this same file on the same drive previously to repair my disk / permissions but cannot do so now. FWIW, I tried placing the file (OSX) on my external HDD to boot from, this did not work either (USB HDD).
Thank you in advance for your input!!

It isn't clear what you mean about your HD being trashed or which disk (HD or USB drive) you are trying to repair, but either way you need to start up from your Snow Leopard installer DVD & instead of installing anything go to the Utilities menu & run Disk Utility from there to repair either or both of the disks.

Intel Xserve will NOT boot from hard disk drive

I have two Intel Xserves 2.0 QC machines
I have tried to re-install version 10.4.11 OS (don't ask) onto a Hard disk drive that is in a Disk drive caddy and inserted in the machine.
When booting from The installation DVD media
The disk is seen by the "Disk Utility" (the disk is partitioned as GUID boot) and the installation proceeds to the disk.
Once the first pass of the installation is complete and the system reboots, the system shows the folder and ? mark.
If I boot and hold "ALT" key to view all avaialble boot options the Hard Disk Drive does NOT appear as valid boot disk.
It does show, the still inserted Installation DVD.
I CAN boot from an external firewire drive and the Hard disk drive is visible to the OS once logged in.
I have tried different caddy postions (left, middle and right)
I have tried bona fide Apple supplied Disk drives
I have tried various different caddies
I have tried installing Operating System 10.5.* and 10.6.8 server
I have run SMC reset and system reset
But still I cannot boot off from any Hard Disk Drive inserted in a caddy at the front of the system.
Has anyone seen this behaviour?
Is it fixable?
Do I have replace something like the Hard Disk Drive back plane circuit board? Or even the main logic board?
I have now run out of ideas and cannot find any help in discussions or just googling.
ANY help would be very appreciated
Regards
Tony

Antonio Hi !
QC = Quad core or QX as it is written on the "pull out" serial number tab at rear of system
I have 3 late 2006 Intel xserves
On my intial posting I declared 2 were 2.0 machines - when I was trying to be concise
2 of the macines are 2.66 systems and 1 is 2.0 system - all are QX machines
the 2.0 and 1 of the 2.66 will NOT boot from the ADM and disk inside the system - whereas the other 2.66 system will.
I have many different Caddies and these have different product/model number labels
603-9965
603-9545
603-9796
these are marked "intel SATA"
The 80Gb was only one of the drives tested - I have used Seagate 400Gb 750Gb and 1Tb - all of which have been used in systems at one time or another
and as I said the drives ARE visible once the operating system (either installation DVD or external firewire are booted from) - they are just NOT visible when the system is searching for boot media.
Thanks for the guide - I will look through that and continue to try and find an answer

MBP 13" (2010 model) will not boot from Restore DVD!

Similar Messages

Maybe you are looking for