Mbp 15" does not start from set up disk
I formatted my MBP because it did not recognize the monitor, had to attach an extermal one to view image. Now, I cannot install the original OS because it does not start from set up disk. I was using OSX Lion latest version
Formatting the entire drive was rather excessive to solve a external monitor issue.
Likely a PRAM or SMC reset would have cleared it.
Step by Step to fix your Mac
10.7 Lion can only be reinstalled via the Recovery HD partition or via a external Recovery USB made in advance.
Hopefully the Recovery HD partition is still availalbe, hold the command and r keys down while booting (with a actve Internet connection cable attached to the router or modem) and see what happens. If you get something then format the Macinstosh HD partition in Disk Utility (GUID, OS X extended journaled) and quit, reinstall 10.7 from Apple's servers with your AppleID and password.
https://support.apple.com/kb/HT4718
http://osxdaily.com/2011/08/08/lion-recovery-disk-assistant-tool-makes-external- lion-boot-recovery-drives/
If not, then hold c or option key and boot from the 10.6 installer disk, use Disk Utility to erase the entire drive on the left and format same (GUID, OS X extended journaled) then quit and install 10.6, then log into AppStore and update to 10.7 again, the Recovery HD partition will be reinstalled automatically.
How to erase and install Snow Leopard 10.6
How to reinstall just OS X or erase/install OS X
If your attemtping to revert your 10.7 Mac to 10.6 then read this, it's a better explaination
How to revert your Mac to Snow Leopard
If your 10.6 disk doesn't work, then call Apple for a replacement disk.
Similar Messages
-
VIPCA does not start from root.sh
Hi all,
I've a problem in installing RAC 10g on ia64 architecture.
S.O.: RH Enterprise Linux AS 2.1
Oracle CRS install completed successfully.
The problems came up during DB installation when I need to run root.sh script that should automatically invoke VIPCA.
Here's what I see when I execute root.sh. :
[root@rx5670 root]# /u01/app/oracle/product/10.1.0/db_1/root.sh
Running Oracle10 root.sh script...
\nThe following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /u01/app/oracle/product/10.1.0/db_1
Enter the full pathname of the local bin directory: [usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
\nCreating /etc/oratab file...
Adding entry to /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
Exception in thread "main" java.lang.UnsatisfiedLinkError: allocHASContext
at oracle.ops.mgmt.has.HASContextNative.allocHASContext(Native
Method)
at oracle.ops.mgmt.has.HASContext.<init>(HASContext.java:93)
at oracle.ops.mgmt.has.HASContext.getInstance(HASContext.java:223)
at oracle.ops.mgmt.has.ClusterUtil.<init>(ClusterUtil.java:46)
at
oracle.ops.mgmt.cluster.GetActiveNodes.<init>(GetActiveNodes.java:164
at
oracle.ops.mgmt.cluster.GetActiveNodes.create(GetActiveNodes.java:213
at oracle.ops.mgmt.cluster.Cluster.getNodes(Cluster.java:267)
at oracle.ops.vipca.VipCA.getNodeList(VipCA.java:532)
at oracle.ops.vipca.VipCA.processGUIArgs(VipCA.java:242)
at oracle.ops.vipca.VipCA.runApplication(VipCA.java:2141)
at oracle.ops.vipca.VipCA.main(VipCA.java:2423)
[root@rx5670 root]#
Thanks a lot,
SimoneCSSD does not start (Cluster Manager)
CSSD does not start (Cluster Manager) -
SQL Developer 1.1.3 does not start from NT
We were previously running 1.1(2514) and have just started rolling out 1.1.3 (2766) and have found that the latest version does not start under NT. Error shell32.dll error.
Is there a fix / workaround as this will stop our rollout of this version, which has some interesting BUG fixes ?I thought so too, but just a couple of months ago Brian added another bug for NT in Re: Sqldeveloper failed to start after latest 1.1.2 Patch .
Doing the search I also came across Sue's more official response in Support for Windows NT? . However that post was over a year old...
K. -
Photoshop Elements 11 Organiser does not start from the welcome screen
Having installed Photoshop Elements 11(Windows 7) I cannot open the Organiser from the welcome screen. It can be opened via the Editor but few of the thumbnails are shown as pictures rather as empty squares. The situation does not improve with time but tends to get worse with pictures turning into squares. I have tried the tip with preferences but to no avail. I would be very grateful for some help. Best Regards Ian Tomlinson
Try pressing Ctrl+A (to select all thumbnails) and then refresh again (Edit >> Update Thumbnails for selected items). If that makes no difference you may need to regenerate the cache.
It may be worth rebuilding the thumbnail cache before re-installing. Click the menu:
Help >> System info to find the path to your catalog.
1. Close Organizer.
2. Navigate to C: ProgramData/Adobe/Elements Organizer/Catalogs/My Catalog
3. Find the file - thumb.5.cache
4. Highlight the file and delete it.
5. Re-start Elements Organizer
6. Wait until all thumbnails have been generated.
N.B. ProgramData may be a hidden system file:
http://windows.microsoft.com/en-US/windows-vista/Show-hidden-files -
CS5 does not start from new SSD disc
I have recently exchanged my HDD with a new SSD disc on a Macbook Pro running Mavericks. I have put an image of my original disc on the SSD and after installation everything runs fine as it should, except of Illustrator CS5, which doesn't even start up.
I get the following error:
Adobe Illustrator cannot be opened because of a problem.
Check with the developer to make sure Adobe Illustrator works with this version of OS X. You may need to reinstall the application. Be sure to install any available updates for the application and OS X.
If I actually plug in my old HDD as USB disc and start CS5 there, it runs no problem. Hence it doesn't seem to be a problem of the OS (anyway, it worked fine before changing the discs).
The detailed crash report follows:
Process:
Adobe Illustrator [565]
Path:
/Users/USER/Desktop/*/Adobe Illustrator.app/Contents/MacOS/Adobe Illustrator
Identifier:
com.adobe.illustrator
Version:
Code Type:
X86 (Native)
Parent Process: launchd [150]
Responsible:
Adobe Illustrator [565]
User ID:
501
Date/Time:
2014-01-20 20:03:01.639 +0100
OS Version:
Mac OS X 10.9.1 (13B42)
Report Version: 11
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/AdobeBIBUtils.framework/Versions/A/AdobeBIBUtils
Referenced from: /Users/USER/Desktop/*/Adobe Illustrator.app/Contents/MacOS/Adobe Illustrator
Reason: image not found
Binary Images:
0x8fe14000 - 0x8fe46417 dyld (239.3) <4B280BB1-55F8-313F-86A6-8ADD644ED69E> /usr/lib/dyld
0x94c04000 - 0x94c12ff7 libz.1.dylib (53) <858B4D9F-D87E-3D81-B07A-DF9632BD185F> /usr/lib/libz.1.dylib
0x99ba0000 - 0x99ba0fff com.apple.Carbon (154 - 157) <6E680560-FD53-3C00-BDF7-7AFA28747DC8> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i5, 2.4 GHz, 8 GB, SMC 1.58f17
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353237334348302D4346382020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353237334348302D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Network Service: GFZVPN, IPSec, utun0
Serial ATA Device: Samsung SSD 840 PRO Series, 512,11 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Hub
USB Device: AS2105
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Internal Memory Card Reader
USB Device: Apple Internal Keyboard / Trackpad
USB Device: Hub
USB Device: Built-in iSight
USB Device: IR Receiver
Thunderbolt Bus:
Anybody understands what the problem could be?Uninstall AI and reinstall from the original disks. Something got munched in the imaging. Adobe apps are not fond of such changes.
-
Macbook pro will not start from the install disk
I have a 13 macbook pro that i am giving to my sister. I am trying to wipe my info and put hers on it. I followed the directions on the apple website and it wouldn't work. I realized that i was using the install disk from my imac. Now that I am using the correct install disk it gets stuck with a gray screen with the apple logo. It stays in this state until the screen goes black and does nothing. I also went into system preferences and told it to start using the install disk now it wont even start it just gets stuck on the gray screen. please help.
Hold down "C" while the computer turns on, then choose the DVD.
BF -
New iMac shuts down but does not start as set in Energy Saver Schedule
Set Energy Saver schedule to shut down at 2300 and it does so at approx 2305. Set schedule to start up at 0700 and it does so the next day but NOT after that (have repeated the exercise 3 times - same result!).
You should not be having "Energy Saver" problems on a new iMac.
Have you tried any of the following?Restarting your computer?
Doing a PRAM zap?
Since you are still under warranty, strongly suggest that you take full advantage of it by calling Apple tech support. Especially if you are within 90 days of your warranty and/or have AppleCare. -
11g node manager reachable but server does not start from admin console
I have a issue with node manager is reachable from admin console and from command prompt it is not connected and could not able to start the managed server.
If i change /config/nodemanager/nm_password.properties plain text and restart it is not reachable in admin console abut can connect from command prompt. I could not able to start the even with this scenario.
i see below error when try to check machine monitor tab.
<Error> <NodeManager> <BEA-300033> <Could not execute command "getVersion" on the node manager. Reason: "Access to domain 'dom_11gint' for user 'Ckr10ycOJN' denied".>
Ckr10ycOJN username in config.xml
node manager and managed servers are not root user process.
Please help me if have any suggestions.Pls. make sure the following points in your environment.
1) Check '*nodemanager.domains*' file in <<WL_HOME>>\commo\nodemanager directory
a) This file should have the entry for your domain 'dom_11gint'.
b) Ensure the path referred in the nodemanager.domains file is correct one.
2) Ensure the following remote server startup parameters are passed properly.
a) In the Admin Console, Navigate Servers --> <<SERVER_NAME>> -->Configuration --> Server Start
b) Pass the required Class Path, Arguments, User Name, Password(User name and Password to boot the managed servers) -
Does not Stream from setting in compressor 4.1
Why won't this 7 min video that I compressed using 4.1 work like the others on this dropdown menu? The video is long but why doesn't it stream? I tried it a few different settings in compressor 4.1 but it won't play like the other short ones. I made all of the short ones in the old compressor with the setting at .264 - 800kbs. This one has to download first completely before it plays even though I see the status bar moving.
The video is here http://www.barryherman.com/live-wedding-bands-nj-ny-pa.shtml
It is on the dropdown as "Cashmere latest dance music", close to the top. Notice how all the others play immediately.
thxMaker sure 'Optimized for network use' (fast-start).
If you have Quicktime 7 Pro... you can fix it in Quicktime 7 Pro by doing a 'save as' in the MENU... FILE SAVE AS option. You can also do this in MPEG-Streamclip (free app.)
Open video in MPEG-Streamclip...
Menu...File...Save As...
Doing this you won't have to re-encode the video again and the fast-start will be added back to the video.
MPEG-Streamclip web page... http://www.squared5.com -
ITunes10 does not start from Data-Disk(error 13001)!
After moving my user folder to an external disk I get the message "Could not open Application "iTunes". Unknown error 13001. Reinstalling iTunes did not help, neither did an alias of the iTunes-folder in the equivalent folder on my System-disk.
Any help appreciated!Found the solution myself. I had a " in the name of the external drive. After removing it all worked fine.
-
IPod touch music does not start songs from the beginning
the songs on an ipod touch does not start from the beginning how do you fix this
In your iTunes Library, check the songs to see if they are set to Remember playback position. If they are, turn that off and Sync the iPod with iTunes for these new changes to take effect.
Highlight a song, right-click/Get Info/Options>Remember playback position: -
Workflow does not start when PowerShell Script is run from Task Scheduler
I have a PS script that updates an item in a SP2010 list so that a workflow will be started. When I run the PS script manually from the PS window on the server it resides, the script runs flawlessly. If I set a scheduled task on the same server
to run the script with the same credentials as are being used in the PS window, the script runs, updated the info on the list, but DOES NOT start the workflow. As we know, SPD workflows cannot be started by anonymous or system accounts. It is as
if the task scheduler adds a bit of information that makes the SP2010 list think the information was updated by one of these accounts even though the field in the list for the item being updated shows the correct account.
HELP!!!
DHi,
The issue might be related to the script or schedule task settings your configured. You’d better check the settings.
For example, which option do you set to run the scheduled task? You may select “Run whether user is logged on or not” instead of “run only when user is logged on” as shown in this article:
http://blog.pointbeyond.com/2010/04/23/run-powershell-script-using-windows-server-2008-task-scheduler/
Hope it helps.
Best Regards,
Sally Tang -
WebAnalysis does not start after workspace is set on Windows Authentication
I've used [doc Hyperion System 9.3.x Configuring the BI+ Workspace for Single Sign-On (SSO) with Internet Information Services (IIS) [ID 1100096.1] to configure SSO for workspace users. It works fine. Though since then the WA service does not start anymore. The error message which is raised sounds very very familar but still I am not able to tackle it. The message in the log or the analysis console is "[WARN] [STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.analyzer.utils.general.HYAUtil - Wait for workspace [
[WARN] Timer-2 com.hyperion.analyzer.utils.general.HYAUtil - ."
I am very sure it had something to do with rights/ permissions, but also after playing around with IIS and ntfs permissions for hours I can't get SSO en WA both working at the same time.
As soon as I set my workspace aplication in IIS on windows integrated, the SSO is working but as soon as a I restart the WA service it fails to start. When I set the workspace application IIS on anonymous the WA service start fine but then the SSO is not working anymore.
It drives me crazy.
Hopefully its a small matter for you to solve!
Thanks in advance.Dont know exactly whats happened but I presume something went wrong during the update procedure.
If you will be not able to start the notebook in the safe mode or to boot the notebook then user the Toshiba recovery CD to gets the notebook working! -
Just installed Firefox 3.6. Firefox will not start and Firefox safemode does not start either. Using Task manager I do not see if started either. If I create a new profile and start from that window, Firefox starts up. I see no error windows/messages. I do have it listed in my Firewall as an exception program with Permit All. What is happening?
== This happened ==
Every time Firefox opened
== After removing Firefox and Reinstalling it. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; MS-RTC LM 8)If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
See also [[Basic Troubleshooting|#Make_a_new_profile|Basic Troubleshooting: Make a new profile]] -
After upgrading from Snow Leopard to Lion I cannot access a PGP drive which was generated under snow leopard. PGP does not start. When I try to start I just receive a message that Lion cannot work with PGP. How can I now access important and confifential informatio which I have stored in PGP (snow leopard). Do I have to move back to snow leopard. If so, how can I do this?
If you have this product,
http://www.symantec.com/business/support/index?page=content&id=TECH165159
you have to go back to Snow Leopard.
To re-install SL, back up your home directory, format and re-install.
Maybe you are looking for
-
How can i see my safari 4.0.3 cache files in windows vista?
Some days ago i saw some pictures of someone on facebook with my safari... Now i cant access this pictures cause they deleted it. In IE all i need to do is go to the folder "internet temporary files" and ill be able to see the pictures and save them.
-
Why is it taking so long to install lion upgrade
why is it taking so long to install lion upgrade? It is about 20 minutes now and still saying wait a few minutes
-
Calendar items created on my Iphone 4S are not showing up in the Calendar on my MacPro after USB Sync.. even though they are still on the phone... ideas???
-
To buy or not to buy, just a few questions
Recently i have been wanting to buy myself a new laptop, and the thought of a apple laptop crossed my mind, i really like how lepoard is going to be, and i was wondering if this is the laptop i want to have and be able to run the OS in the system I p
-
Why in the levels box, "OK" is missing in the layers side, but not in the other?
I have used several past versions of Elements. The past Levels control had an OK Button to use when I was done with the adjustment. Elements 9 does not have the OK button on the layers side, but does have it using the Enhanse drop down menu or Ctrl