MBP 17" does no longer boot from CD or my two other operating systems

Hi there,
I have an MBP on which I have 3 OSs installed: OS/X, Win7 64 and Ubuntu 10.10; I select between them with rEFIt.
Earlier today while working in WIndows, the screen went completely blank as if the machine shut itself off. I then tried to reboot into Windows and after selecting it from rEFIt, it never booted again.
For testing purposes, I tried to boot into Ubuntu, and nothing happened - the screen stayed blank.
Finally, I tried to boot from a Ubuntu Live CD, but nothing happens, the screen stays blank.
Mind you, though - OS/X boots just fine and everything works normal. I can access the Windows partition just fine from OS/X, so nothing got deleted there.
Any idea what this is and how to fix it?
Thank you!
Rainer

I don't know how much help I'll be to you. Seems to have a lot of posts lately about not being able to start up from the install disks.
I assume you can still boot up from the internal drive.
When you hold the option key to start, does the screen come up with the option to choose a startup disk and is your Install Disk in when you attempt this?
While booted up normally, does the Install Disk open up with the install OSX menu? If so, does going through the install menu reboot the computer from the CD automatically?
Even if there were a firmware upgrade, seems like you would be able to use the 10.6 Install Disk to boot from.

Similar Messages

Does Time Machine track changes to disks made by other operating systems?

I run 10.8 Mountain Lion on my main partition but also occassionally boot to a copy of 10.7 Lion on a separate partition in order to run a version of Quickbooks for Mac that isn't supported in 10.8. Time machine is only turned on in 10.8 and backs up all internal disks and partitions when I'm logged into that operating system. My question is does time machine in 10.8 notice changes made to any of the internal disks made by me while I was booted into 10.7 Lion?
Occassionally I reboot into 10.7 Lion to run Quickbooks for Mac 2011, do work, make changes to files, ect. When I log back into 10.8 Mountain Lion and Time Machine does it's normal back up thing, does it recognize changes that were made to internal disks, folders, and files that were made when I was previously booted into 10.7 Lion? Or does Time Machine in 10.8 Mountain Lion only recognize changes that are made when it's running?
Thanks Peeps!
ben

When I log back into 10.8 Mountain Lion and Time Machine does it's normal back up thing, does it recognize changes that were made to internal disks, folders, and files that were made when I was previously booted into 10.7 Lion?
Yes.

My trusty Mac LC no longer boots from the HD

I purchased a new Mac LC many years ago and it has served me well until recently when it would no longer boot from the hard drive. When I boot from a Disk Tools floppy, I get some limited success but do not ever hear the HD spin up. The startup chime also does not sound. When used as the boot disk and trying to use the installer option, the program can't find a SCSI drive, only the floppy drive. The 5V & 12V to the HD are right on and a new PRAM battery is installed. I can load and run programs using the floppy drive but that requires a lot of disk swapping. I tried substuting a tested Apple LC HD with the same results and now I suspect the problem is not the HD but is somewhere else. Any help would be gratefully appreciated. Thanks!

Thanks to Jan & Jeff for their quick response to my question. Here is some additional background information which may give you both some more ideas.
The original 40 MB HD was replaced with a 120 MB HD along with an increase in RAM to 4 MB sometime in the first year after I bought the LC. The 40 MB HD was installed in an APS (?) external SCSI box with its own power supply. OS 7 was just becoming available and Apple gave me a set of disks even though OS 6.x was in the computer so I put OS 7 on the external (40 MB) HD. Everything worked great for 20 years although there were periods of intermittent use when I used other computers for work, Internet, and e-mail. I powered up the external HD infrequently but it worked fine the last time I tried it some months back.
Then when I fired the LC up 6 or 7 weeks ago, it would not boot unless I turned the power switch on & off 2 or 3 times in succession then everything functioned normally. Then it would not boot at all even from the external HD.
Now, to address some of your comments and observations:
All connectors, plugs, SIMMs, and socketed RAM devices were removed, examined and replaced. All electrolytic caps showed no signs of leakage or swelling and the PWB looked in its original condition.
The +5, -5 and +12 voltages measured at the power supply connector were within 1%. When I originally thought I had a HD problem, I opened up the 120 MB HD and when trying to boot, the platter would give a slight twitch with no tendency to spin. A friend of a friend (a MAC serviceman) brought a couple of vintage drives SCSI over to try with similar results. The Apple HD I purchased was tested and guaranteed, although wiped clean. It has since been returned. As I said in my original question, the Installer on the floppy could not find a SCSI drive. In all of my efforts I could never get any of the hard drives to spin up.
Although I have a MacMini (OS 10.6.8), I still used the LC because for drawing schematics and floor plans, printing labels, etc., simple is better for me. Is there any hope that I can get my LC working again?
Many thanks for your help and suggestions. len-35

G4 PowerMac no longer boots from External FireWire Hard Drive

What would cause a G4 PM to no longer boot from an Ext. FW HD that was working fine yesterday and in fact still mounts fine on the desktop..... but when I go into system pref's and attempt to select the ext. HD (and it does show up as an option to boot from since it has an OS in Mac OS Extended Format, Journaled) but after selecting said drive the system simply defaults to the main HD instead and not the external HD I selected within system pref's.???
(I've run apple's disc utilities / First Aid ..... it simply says no repairs were necessary).
The HD in question is a Maxtor 120GB 7200 ATA133 in the following ADS enclosure:
Click Here
Same enclosure works fine with a pionner 110D S-Drive.
Any Suggestions (short of installing the Maxtor hard drive internally which I may have to try anyway)?

Boot Device Not Found Please Intall an Operating system on your hard disk. Hard Disk - (3F0)

Hello,
I tried to re-install de OS from windows 7 to windows 8.1 and when the bios update driever was installed and the laptop was restaring it appeared the folowing window and message:
Boot Device Not Found Please Intall an Operating system on your hard disk. Hard Disk - (3F0)
After that i tried a lot of different ways to get to boot device select ...but i couldn't do anything. I removed the HDD and i put it back, i've tried with holding in the same time windows +B and pressing the power button in the same time for 1..2 seconds and then i've waited for at least 1 minute..and it didn't appeared anything on the screen. I've done the hard drive check and it passed. The weirdest thing is that when i want to select a boot device to re-install again the OS, i can't see any boot device to select. I need to mention that i've formatted the HDD in another computer. I dont care about the informations from the HDD beacause i saved all the informations on another device storage.
Please help me repair this problem!!! thanks a lot!
Have a nice evening.!!!

Whenever you get a message stating that the boot device not found it could be because of bad sectors on the Hard Drive. Its not necessary that the Hard Drive Test should fail to determine if the Hard Drive if its faulty or not. Sometimes even if the Hard Drive Test passes the Hard Drive will still not work because of the bad sectors in it.
Best way to find out if its the Hard Drive you can try the Hard Deive on a different Notebook which would help you determine if it's faulty or not.
Could be due to Application or driver conflicts, virus issues, file corruptions due to incompatible applications, improper shutdowns, update failures due to conflicts, sudden power surges, if notebook is dropped etc..
HP will provide a replacement Hard Disk Drive if the Notebook warranty is Active, If not you need buy a SATA Hard Disk Drive from a retail shop nearby
Please make sure you are getting at least equal capacity as the original one in order to use Recovery Disks. If you need you can buy a larger, but not smaller capacity Hard Disk Drive. For example if you have a 500GB Hard Disk Drive you can upgrade it to 750GB Hard Disk Drive but not 320GB Hard Disk Drive
Please try the below shown troubleshooting steps once:
Step 01. Remove the battery and unplug the AC/Power Adapter
Step 02. Press and hold the Power button for more than 30 Seconds
Step 03. Plug in the AC/Power Adapter (leave the Battery out for now)
Step 04. Press the Power button and check if the Unit works normal
If the above mentioned steps does not help, then you can try reseating the Hard Drive on your Notebook
If the issue persists again please Contact HP if your HP Notebook is under warranty, HP would replace the Hard Disk Drive and provide you a Recovery media to restore factory operating system after replacement (if you've not yet created Recovery Discs/USB Media)
Note: Back up all the personal data to an external drive if it's possible. Otherwise you could connect the failed HDD via SATA to USB adapter with another PC or same PC after replacement of HDD & re-installation of OS and try copying /recovering the files.
Please click on the link In order to Identify, Prevent, Diagnose & Recover from Drive Failures on HP Notebook Hard Drives & Solid State Drives :
http://h10032.www1.hp.com/ctg/Manual/c02876562.pdf
Please check your notebook warranty to verify the status and order a new Hard Disk Drive
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

HP Pavilion dv-4087CL Notebook receiving : Boot Device Not Found-Please install an operating system

My Duaghter is out of the country studing abroad. Her PC would no longer boot up so she took it to a support shop. They replaced her hard drive, fixed an over heating issue and reloaded her PC. Now she is getting this new error message and she is desparate to get this fixed. We have owned this PC for only 2 years. I am sure it is out of support.
HP Pavilion dv-4087CL Notebook receiving : Boot Device Not Found-Please install an operating system on your hard disk.
She took it back to the support shop and they upgraded her bios, but that did not fix the error message.
Please help! What can she do now.

Hi:
Normally that means the hard drive failed.
I know it was replaced but maybe the replacement drive went out too.
There is a hard drive diagostics tool your daughter can run in the BIOS.
I suggest she run it (enter the BIOS by tapping the F10 key as soon as she sees the HP welcome screen).
Then once in the BIOS, there should be a diagnostics menu..one for memory and one for the hard drive.
She should select the hard drive diagnostics application and see what it reports.
Then go from there based on what is reported.
Paul

Boot Device Not Found, Please install an operating system on your hard disk, Hard Disk (3FO)

Hey
i am having this Error Message "Boot Device Not Found, Please install an operating system on your hard disk, Hard Disk (3FO)", While UEFI mode is enabled from bois but in Raid menu Both my hard Drives 1TB and SSD are Showing and I run the F2 System Diagnostics Test and it became as passed. In UEFI mode its not even showing my USB when i attach it for Window install But when i enabled the Leglacy mode it detteced my USB and also let me install my Windows and every thing seems to work fine. Updated the bios still Error is there.
Error Message only shows up when I disable the Leglacy mode.
So where is the Problem ? hard drive seems fine because these are working on Leglacy mode enabled.
Laptop Model : HP Envy Dv6-7211tx
Hard Drive : 1Tb and 32GB SSD

Hi Saifullay, sorry to hear that you are having issue with your Envy Dv6-7211tx. I have done some research and I have found a document that will assist you with this issues. Please click the link that I have provided to get to the document. http://h10010.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01443463
If this does not resolve the issue, please feel free to write back . I would like to also apologize for the delay and the inconvenience that you have had to deal with.
Thank you.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

"boot device not found. please install an operating system on your hard disk error on Dm3 1030us

Hi
I have the following computer:
name: hp pavilion Dm3 1030us
serial number: {Removed for privacy}
product number: VM073UA#ABA
when i boot up my laptop it says "boot device not found. please install an operating system on your hard disk."
this laptop does not have a cd drive but I do have a external one. since it does not have a cd drive therefore they didnt give me a recovery cd.
It had Windows 7 on it.
Is there a way to get the issue resolved

You would have to call in to HP tech support ( 1-800-HP-INVENT) and have them order you some RCD's.
I work for HP.
Please click the White Kudos star on the left to say thanks.
Please mark Accept As Solution if this resolves your issue.

HT4818 after installing boot camp 4 on mountain lion " Missing operating system"

Hello
I hade a small Windows 7 partition , so after updating to mountain lion , I wanted resize win partition .
I made an image of it , then deleted win partition from utility disk , ( wrong idea )
I didn’t notice that boot camp could erase win partition , anyway I have tried several times , and always after reboot boot camp
I get the same
Missing operating system .
If I boot from dvd install win or if i boot from the boot win partition.
hd and partitions looks OK to utility disk
Any idea to fix the problem ?

I presume that you've followed the instructions for sideloading the iMac Windows drivers into your install via USB stick? (wasn't aware the EFI recognized the SD slot as storage on boot. Now i know)
I always found more success in just slipstreaming the drivers and install.xml file onto a custom Win7 DVD rather than the USB approach when trying with my Late 2009 27" iMac. The Win7 installer needs that enclosed .xml file in the driver package to tell it where to find the drivers so that they be loaded when the Win7 image extracts itself.
If you're using mountain lion, then you should be receiving the proper Win7 driver set. If you wanted to create a custom image, then you can use an ISO file, the driver package and disk utility to make something you can use. Either that or you learn what edits your install.xml file needs to point the installer properly and check it manually.
I don't know what links you have so i'll just include everything:
Installing boot camp on a Late 2009 iMac:
http://support.apple.com/kb/TS3173
Direct link to Late 2009 iMac-specific Windows drivers.
http://support.apple.com/kb/DL995
I'd try a USB stick and the iMac-specific driver set. It should steer your insolent windows installer correctly.
Hope this helps.

Is it okay to upgrade from os x 10.6.8 to yosemity without first getting the other operating systems?

is it okay to upgrade from os x 10.6.8 to yosemity without first getting the other operating systems?

Hey there jpenilla,
Welcome to Apple Support Communities.
Yes. The webpage below provides the answer to your question, about upgrading to Yosemite from OS X Snow Leopard (v10.6.8), and it provides additional information that you may find helpful.
Apple - OS X Yosemite - How to Upgrade
You can upgrade to OS X Yosemite from the following:
OS X Snow Leopard (v10.6.8)
OS X Lion (v10.7)
OS X Mountain Lion (v10.8)
OS X Mavericks (v10.9)
So long,
-Jason

Boot device not found - Please install an operating system on your hard disk

Trying to boot up this morning gave this error message:
"Boot device not found
Please install an operating system on your hard disk
Hard Disk <3F0>
F2 System Diagnostics"
Pressing F2 brings up to the "HP PC Hardware Diagnostics UEFI" page, where its shown:
"Version 1.6.0.0 - BIOS
Fore more info please visit www. ... ...
Memory Test
Hard Drive Check
Language
Exit"
Tryied the HD check but it says:
"SMART Check : Not installed
Short DST : Not installed
More details:
No bios upgrade was made, never, only a big updating of Windows yesterday.
Could someone kindely help me out please?
Thanks, Perry G.

Hi,
The above error message shows that the Hard disk drive is failed on your unit. You have to replace the Hard disk drive and reinstall the OS.
To order parts click the below link
https://h20141.www2.hp.com/Hpparts/Default.aspx?mscssid=FA59F7C7DCAC4237B498C91D0507A761
To order Recovery disk click below link
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&cc=us&dlc=en&lc=en
"I work for HP."
Please click the "White Kudos" star to say thanks for helping.
Please mark "Accept As Solution" if my help has solved your problem.

My lap top says boot device not found please install an operating system on your hard disk

I was on yahoo and page froze. I hit alt/ctrl/delete and nothing happened. I then hit ctrl/esc. I now have a screen saying boot device not found. please install an operating system on your hard disk. hard disk (3FO) What did I do wrong? this is a Compaq presario CQ56-112 NR Notebook Windows 7
This question was solved.
View Solution.

I would suggest going to the following link and going through the listed troubleshooting steps based on your symptoms:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443371&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
I am an HP employee.
Please post rather than sending a Private Message. It's good for the community and I might not be able to get back quickly.- Thank you.
Please click the White Kudos star on the left to say thanks.
Please mark Accept As Solution if this resolves your issue.

How do you open a Numbers file sent from another Mac user with same operating system, i get a pop up that says I'm missing an index.hml file??? HELP PLEASE

how do you open a Numbers file sent from another Mac user with same operating system, i get a pop up that says I'm missing an index.hml file??? HELP PLEASE

The operating system may be the same but the Numbers applications are likely different. You need to get the apps in sync. Unfortunately, the Numbers (and Pages as well) saga is pretty confusing (and frustrating). Here's some info from the iWork resident version expert (PeterBreis0807):
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5.2 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Older versions of Pages 5 can not open files from later versions of Pages 5.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud and opened in a newer version of Pages is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has removed almost 100 features from Pages 5 and added many bugs.

Can no longer boot from ANY OS disc on MBP

I recently purchased a 15" 2.16ghz Core Duo Macbook Pro. It came with the original 10.4.5 discs. The previous owner installed 10.6 on it using a retail disc, then upgraded to 10.6.6. I had planned on upgrading the original hard drive. However, I cannot get the laptop to boot from the original discs or my own retail 10.6 disc. I've tried a number of different approaches (booting from an external DVD, holding down "C", holding down "option", attempting to mount in on the desktop first, etc.). Either the machine hangs or it ejects the disc (when using the internal drive). Nothing seems to work. Both the internal drive and external drive have been tested and work fine. Is it possible that when upgrading to 10.6.6 a firmware upgrade was done that won't allow the machine to boot from a disc containing an earlier version? I don't know what else could be causing the issue. The laptop has not displayed any other issues. Thanks for any suggestions or explanations.

I don't know how much help I'll be to you. Seems to have a lot of posts lately about not being able to start up from the install disks.
I assume you can still boot up from the internal drive.
When you hold the option key to start, does the screen come up with the option to choose a startup disk and is your Install Disk in when you attempt this?
While booted up normally, does the Install Disk open up with the install OSX menu? If so, does going through the install menu reboot the computer from the CD automatically?
Even if there were a firmware upgrade, seems like you would be able to use the 10.6 Install Disk to boot from.

After OS Upgrade, Computer will No Longer Boot from Disc, Enter T-Disc Mode

I purchased the Leopard update about a week ago and proceeded to install it (upgrade option) on my MacBook Pro previously running Tiger. After this update, I no longer seem to be able to boot from a disc(c on startup), enter target disc mode(t on startup), enter single user mode(command s on startup), basically anything that requires hitting a key on boot. In short, the operating system seems to override any of those commands and just loads regardless of what I press.
How can I fix this?? I fear that if my mac suddenly dies, I won't be able to fix it with archive and install via the CD, since I can't boot from it. I also won't be able to recover my files with target disc mode or anything.
For more in-depth details:
-My hard drive does have an open firmware password- it was recommended as part of the undercover anti-theft program that I use. Although I can tell putting the password on was a mistake, since I've read that single user mode is no longer accessible with this password active. I don't think this is affecting my inability to boot from disc or target disc mode though, as I was always able to do this with Tiger, even with the firmware password active.
-I have tried booting from other discs, like my old tiger OS disc that came with the laptop- that fails too.
-My Leopard installation was not clean. Like many others, I used the upgrade option and it appeared to work ok- until restart, where I was faced with the blue screen. Since I was unable to boot to single user mode and try removing potential APE files, I let the computer sit for an hour on the blue screen until it finally loaded. Upon getting in, I found that I did not even have APE's installed. I proceeded to reinstall the operating system via an Archive & Install. Upon boot after this reinstall, I still received a blue screen that lasted a long time, and the OS loaded very slow. It did this for a few additional boots afterwards, and has appeared to smooth itself out now, a week later. The OS now loads fine and works alright (from what I can see), but I still can not boot from disc or anything else.
If anyone at all knows a solution for this, it would be much appreciated. I wanted to suspect something like the disc drive going bad, but being that things like the target-disc mode aren't working either- I'm hesitant to believe its just the disc drive. Being that it also happened just as I upgraded to Leopard and faced issues, I have more of a hunch that its something to do with Leopard.
I apologize if this has been answered before, but I've looked all over the site, google, everywhere I could think of and came up with no answer.
Thanks ~Brian

Hi, I have been having the exact same problem with a late 2011 MBP 15 inch. I replaced the hard drive with a samsung SSD 1.5 years ago, along with a samsung SSD in the optical drive. It worked great until the Yosemite upgrade. The MBP seemed to work reasonably well for a few days after the upgrade, but then it started stalling on various programs (spinning beach ball on Mail, Safari, etc). Start-ups were also longer and had a loading bar each time, which was new since the upgrade. I left the MBP to sleep last night and when opening it, it crashed and tried to restart. On restart it loads to the login screen, then after I enter the password it partially loads (based on the loading bar), then shuts off. I removed the SSD and plugged it in with a USG, but that didn't change anything. Here is a picture after using CMD-V before it shuts off.

MBP 17" does no longer boot from CD or my two other operating systems

Similar Messages

Maybe you are looking for