Mbp 2.16 2007 and cinemadisplay 20

hi
recently I bought from a friend a cinemadisplay and everything works fine except everytime I come back from a travel I must repair disk when I plug the cinemadisplay again...?
tnx in advance...
m

I'm usng the old istat pro widget to keep an eye on it
CPU and heatsink watching cpu and heatsink just climb after booting and just running a browser
I'm using a laptop usb fan mat, belkn I think
What temps are max danger to board?
Maybe I should just replace with old HD?!?
Dang speed was awsome

Similar Messages

Just turned on my MBP 2007 and the screen gets stuck on the light blue before the normal log in page comes. Any Clues?

Just turned on my MBP 2007 and the screen gets stuck on the light blue before the normal log in page comes. Any Clues?
Worked fine last night. It's running Snow Leopard.

Does your iMac fail to boot every time or only some of the time? Here are some things to try:
- Boot into "safe mode", which will run the equivalent of Disk Utility's "repair disk" operation.
- Boot from the system install disc that came with that Mac with the "D" key held down to run the diagnostics. Run them several times to see if any hardware problems are reported.
- If you can't identify the problem or fix it any other way, download and install the OS X 10.6.7 "combo" updater.
- If that still doesn't help, try reinstalling OS X 10.6 over the top of what's on the disk.

I have a macbook pro from 2007 and the display memory slows do the screen so much it is almost unuseable Any help fixing this problem?

I have a macbook pro from 2007 and the display memory slows do the screen so much it is almost unuseable Any help fixing this problem?

Hi,
Have you tried
1.leaving the screen flipped open,
2.connecting power
3. connecting external monitor; waiting for it to 'wake up';
then 4. closing lid of MBP to activate clamshell mode?

Excel 2007 and Smartview 11.1 file open slow

We are in the process of upgrading to HFM system 11.1 and smartview 11.1.1.3 and as part of this process we are starting to use Excel 2007. I am encountering an interesting problem when opening files in Excel 2007 using smartview 11.1 and I am wondering if any one else has seen this problem and found a solution.
First I converted an excel 2003 file to excel 2007 and saved the file as an xlsx file type. Then I am able to open the file and it would take about 30 seconds to open the file. The file has about 15,000 formulas on for spreadsheets. If I click on each spreadsheet individually and use the "Refersh" button I can save the file in about 10 seconds and then close the file. When I open the file again it will open in 30 seconds. Now using the same file I click "Refresh All" and the file processes fine. I am able to save and close the file in about 10 seconds. However, when I try to open the file again it takes about 20 minutes to open, and then 20 minutes to close.
This only happens with two or three files. I have another file that is 40 spreadsheets and about 3,000 formulas that is not affected when I click Refresh or Refresh All.
Any help would be apperciated.
Rich

Hi
On metalink i found some notes about this issure
"Background
SmartView communicates over HTTP using .NET. This just means that requests and responses are sent in a standard XML format that is tucked in the HTTP headers. The mechanism is the same as when your internet browser requests a file or submits a form (simplification). A standard Microsoft component that is part of Internet Explorer is used for this.
There are three components (four if you include the network) in a SmartView refresh:
-the client
-the web server
-the HFM application server
It is easiest to troubleshoot when they are on separate machines. (Running SmartView on the server to see whether it works better is a useful test to see what effect the network is having, but doesn't show any other bottlenecks.) If you run Task Manager on these 3 machines showing the Performance tab, you will see initial activity on the client as Excel clears the cells and the request is converted into XML. Then you see the web server get busy as it receives and parses the request. Then the application server is busy as it send the data, then the web server is busy as it compiles the results into XML again, and finally the client parses the XML, pushes the data into cells and runs an Excel calculation. This last stage is the longest of all. Overall, it is typical to see the client doing 90-95% of the work, so client performance is a very important factor. Look out for Excel's memory usage increasing and RAM becoming in short supply. Often, user dissatisfaction with refresh times can be alleviated by giving them more RAM or a faster PC.
The situation we are dealing with here, however, is when the chain of events described above is interrupted. In this case, you will see the client or the web server wait in vain for a response from the next machine in the chain. The case of invalid XML is similar, but the response is truncated so that the XML is not well-formed when it arrives. XML consists of matching pairs of tags and is not well-formed when a closing tag is missing. This can be caused by certain network settings such as packet size (see later). The end result in either case is the same: as Excel cleared the cells before sending the request, cells are left blank or with zeroes.
Your job now is to work out why the particular component is failing.
Client
Check the HTTP time out in the registry:
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings]\
"ReceiveTimeout"=dword:00dbba00
"KeepAliveTimeout"=dword:002BF20
"ServerInfoTimeout"=dword:002BF20
The time-out limit is five minutes for versions 4.0 and 4.01 and is 60 minutes for versions 5.x and 6. Also, the time-out limit is 30 seconds for Windows Internet Explorer 7. To change the settings, add the above keys. The above values are hexadecimal, not decimal and correspond to 18000 milliseconds (3 minutes) and 240 minutes for the receive time-out. See
- http://support.microsoft.com/kb/813827
- http://support.microsoft.com/kb/181050
Once you make those changes, my recommendation is that you reboot the client machine.
Web server
Look for errors in logs showing that the web app didn't respond/disconnected or timed out waiting for another application (i.e. the HFM application server). Eliminate load balancers etc. during testing in order to isolate the problem and to ensure that the user always goes to the same web server otherwise, logs can be hard to interpret. See also the IIS Tuning Guide for IIS settings. We cannot recommend particular settings, as each client must establish the optimal settings for their own environment after performance testing. If necessary, engage the services of a suitably qualified consultant.
Application Server
HFM application server performance is very dependent on whether the data is already in RAM or not. One symptom, where the first refresh fails but the second one succeeds, is probably a sign that the cache needed to be populated and once that had been done (by the first refresh) it went faster. HFM loads whole subcubes (Scenario, Year, Value and Entity) into cache, so asking for lots of accounts in the same subcube is fast, but asking for lots of entities will inevitably slow things down as it runs out of RAM and starts unloading subcubes to make room for more. The HFM event log (HsvEventLog.log) shows this happening, but don't forget that the messages you see are a normal consequence of the way HFM works and are not a problem unless you see a hugely elevated number of them during the period the refresh occurs. Another sign would be page file thrashing.
If there are several servers in a cluster, use sticky sessions in HFM to make sure tests always go the same server, or hit one server directly rather than using the cluster.
Solutions here involve giving more RAM to the server (probably not possible because of the 2 GB limit) and changing the worksheet design to restrict the number of subcubes accessed. A separate consolidation server, so that reads are not competing with intensive consolidations and calculations, would be a good thing.
Network
To find out if packets get fragmented, use
ping -l size -f
to send a big packet with the 'don't fragment' flag. E.g.
Ping -l 1024 -f oracle.com
If you see a reply like Reply from 141.146.8.66: bytes=1024 time=200ms TTL=245 then the size you specified is below the packet limit of the network. But if you use, for example, 2000 in place of 1024, you get Packet needs to be fragmented but DF set, then you know you have exceeded the limit. Combine this investigation with a Fiddler trace (https://www.fiddler2.com/fiddler2/) to see what size data messages are being sent and received.
Troubleshooting Guidance
If you seriously want to go into this in more detail, then it will take a considerable effort on your and your IT Department's part. My general advice would be:
1. During this process, fix your environment so that it is predictable. Register a single HFM application server and connect to that. Use a single web server and don't go through Apache or any other redirector. Make sure we know which machine to go to for logs. This would be a temporary measure and it doesn't stop the other users using the full, load balanced system so long as it doesn't involve your server.
2. As far as possible keep other users from using it during testing, unless you are specifically testing for performance under load. We want to see what activity is due to SmartView and not random other jobs.
3. Use PerfMon on all three machines: client, web server and application server.
4. Clear Logs before testing and note the times of each test so the logs can be correlated.
5. Log CPU activity, memory usage, network throughput, page faults, thread count etc. I'm no expert on this so get advice from someone who is.
6. In addition to the performance logs, from the IIS Server get:
* HTTP.SYS Error Log - %windir%\System32\LogFiles\HTTPERR (Default location; configurable)
* IIS Website Log - %windir%\System32\LogFiles\W3SVC# (Default location; configurable)
* Event Log (both System and Application) in EVT and TXT (tab separated) formats
7. From HFM Application server get:
* HsvEventLog.log (in <HFM install>\Server working Folder)
* Event Log (both System and Application) in EVT and TXT (tab separated) formats
8. Be aware of all timeout settings in your environment (i.e. IIS & the network) and time your tests. This can show whether it is an ASP timeout, script timeout, client side timeout or whatever. Note that the Web Session Timeout setting for SmartView in HFM's Server and Web Configuration is a separate issue from IIS timeouts. Web Session Timeout controls the length of idle time before SmartView makes the user log in again. Default 20 mins.
9. Run Fiddler traces to directly observe the XML and check for HTTP failures.
Further resources
- Tuning IIS 6.0 for HFM
- SmartView Performance FAQ
Both are available from Support.
Author: Andrew Rowland
Version: 11.x (Fri, 30 October 2009)"
regards
Alexander

Oracle Streams b/w MS-Access 2007 and Oracle 10g.

Can we set up Oracle Streams between MS-Access 2007 and Oracle 10g? Ms-Access as source and Oracle 10g as destination database. If so, can any one please give me little heads up with supported doc's or any source of info.

Help Help....!!!

I am having difficulty: we are running a windows server 2003 - mail and outlook support 2007 and upwards, how do I get the brand new apple machines to work with the 2003 version of server

I am having difficulty: we are running a windows server 2003 - mail and outlook support 2007 and upwards, how do I get the brand new apple machines to work with the 2003 version of server

I may be way out, but do you know about this product, would it help integrate the Macs for you.
https://www.thursby.com/sites/default/files/images/ADmitMacv8_SPD.pdf

I have an HP-Pavilion Vista PC with MS Office 2007 and Service Pack 2. Each time I try to save a Wo

I have an HP-Pavilion Vista PC with MS Office 2007 and Service Pack 2. Each time I try to save a Word or Excel document I get the “Not Responding” message. The “Word is saving……” bar at the bottom does not show any progress. On clicking the document I get a faded version even when in Safe Mode. Somehow the document appears on the Desktop where I tried to save it. On trying to open the saved document, even as administrator, I get the following ”File in Use” message:
“The ….docx is locked for editing by….” and I am asked three questions including:
“Do you want to open a Read Only copy” yet on clicking “Yes” I am able to edit the same document.
On trying to save to a different location I get the message:
“Your autocorrect file MSO 1033.ad could not be saved. The file may be read only or you may not have permission to modify this file.”
The same message stating FILE12\1033\MSO.ACL MSO 1033ad recurs with new Excel documents.
How can I correct this problem?
PS
Worse still, the HP Advisor icon that appears on startup does not load successfully while showing the message: “Access to the path Hewlett-Packard\HD Advisor is denied”.
What can I do about it?
ZDK

I'm having the same issue, allowing guest access on the share did change the logs I'm getting in Samba. Earlier on it was giving errors on the inability of guest access to the share.
============================================================
[2008/01/29 13:05:47, 0] /SourceCache/samba/samba-100.5/samba/source/lib/fault.c:fault_report(37)
INTERNAL ERROR: Signal 11 in pid 4204 (3.0.10)
Please read the appendix Bugs of the Samba HOWTO collection
[2008/01/29 13:05:47, 0] /SourceCache/samba/samba-100.5/samba/source/lib/fault.c:fault_report(39)
============================================================
I also noticed that the temporary file that is created by office is not removed after the attempt to safe the file. (something like: ~$filename).

Excel 2007 and Smart View 9.3.1.4.041

Dear Experts,
We are now working with Excel 2007 and Smart View 9.3.1.4.041, and encounter the problem that ervery time open the protected excel file there would be the warning message "Drawing Objectes in one or more sheet(s) in the workbook are protected. Please unprotect them and try to save again."
Can any one suggest with;
1. How to set the Excel security settings for Excel 2007 to work for smart view?
2. How to avoid the message mentioned above while working with Excel 2007?
3. How to create a protected Excel file to work with Smart View 9.3.1.4.041 both in Excel 2003 and Excel 2007?
Tks
Edited by: Moonlight on May 19, 2010 10:00 AM

I've experiencied similiar problems, though other users may have found a better solution, I've unlocked the spreadsheat, refreshed, and then relocked via a VBA macro. A button object at the top of the spreadsheet was added to make it easier for the users use as well. If there is a better solution I am very interested in this as well.
JTF

Source of Multiple Calendars in Outlook 2007 and iCloud (iOS7.0.4)

Source of Multiple Calendars in Outlook 2007 and iCloud (iOS7.0.4)
My iPhones (2) and iPad list the following color-coded calendar names when the word "Calendar" is pressed at the bottom of the calendar screen: All iCloud (no colored dot), Calendar (Blue Dot), Home (orange Dot), Saved emails (red dot), and Saved emails (2)( green dot).
Calendar items created on both iPhones are coded with a blue dot and appear on a blue background in iCloud and on the phones. Calendar items created on my iPad appear on a green background (saved emails 2) on my iPad and my iphones. Why isn't the color "Blue"? It appears that entries made on Outlook appear in Saved Emails (red).
I have not imported or connected with any external calendars.
This behavior raises the following questions:
1) Should entries created on each device appear in a different color?
2) Does the color associated with an entry designate a specific device or a specific type of device?
3) Which device is the "Home" device referred to in paragraph 1 above?
4) Why would a Calendar be named with a reference to "saved emails"? From where would it come.
My understanding about synching with iCloud was that any entry from any iDevice (phone or pad) or iCloud would appear in both iCloud and in the calendars of all devices on the same Apple Account. Please confirm my understanding or correct it.
With iCloud as the hub, must I still utilize Microsoft Outlook? I am retired and no longer need Outlook for work.
Can I edit any calendar entry in I cloud had have it change it in all the devices, or must it be edited in the device in which the entry was originally made?
Any help would be greatly appreciated.

I would ditch Outlook like a bad habit.
Now to answer your questions starting at the bottom. yes, you can edit any and all iCloud Calendars on iCloud.com. You can rename your calendars, re-color them, create, edit or delete events, etc.
So you asked a question on why your calendars are named 'saved emails'. This sounds like something that would be created from Outlook since you can send email to the calendar in Outlook. If you quit using outlook, you can simply rename the calendars to something more sensible or delete them entirely.
About calendar colors. Each calendar you (or your mail program on your behalf) has created gets assigned a name and color. Each color helps your identify which calendar and event belongs to. When you create a new event from your iOS device or iCloud.com, you will find a handy little section that says 'calendar' where you can specify to which calendar (or color) you want that event to be on. You will also find this option when tapping and editing and event on the iOS devices or icloud.com. If you want all of your devices to default to the same calendar when creating a new event, on your iOS devices go to Settings > Mail, Contacts, Calendars > Scroll to the section that says 'Calendar' in gray (its at the very bottom) and change the 'default calendar' to whatever you want the defualt to be. You can also change the default in iCloud.com by clicking the gear icon.
My recommendation: 1) Ditch Outlook. Go to your Control Panel > iCloud and uncheck Outlook. 2) Move all of your events to one or two calendars. if you don't have a need for multiple calendars, just simplify your life and move them all to one calendar. You can edit the event and change the calendar, then go back and delete the other calendars that are confusing you with all the different colors. You can rename, recolor, create and delete calendars form your iOS device by tapping calendar in the bottom of the screen when in the calendars app then tap edit in the top left. You can also do these same things on iCloud.com Where ever is easiest for you will work.

Opening Office 2007 and 2010 documents in FDM as Custom documents

Hi Gurus, could you please help with this one.
I am trying to load Office 2007 and 2010 documents as custom documents in FDM. I can load the files successfully but when I try to open the loaded excel (xlsx) or word (docx) file, it opens up as a zip for me to save. I have added the docx, xlsx & pptx mime file types in the workspace without any luck as according to the following document *Incorrect format of MS Office 2007/2010 Files Downloaded from EPM Workspace [ID 1426071.1]*
Has anyone experienced this issue before:
Hyperion Version : 11.1.2.0
OS : MS Windows Server 2008 x64 SP1
Please help

Hello,
Can you please be more specific on exactly the steps you are taking?
Thank you,

TS4463 I am using Windows Vista with Outlook 2007 and iCloud. Everything has been great until this morning. I'm suddenly getting the message "Set of folders cannot be opened. The information store could not be opened.

I am using Windows Vista with Outlook 2007 and iCloud. Everything has been great until this morning. I'm suddenly getting the message "Set of folders cannot be opened. The information store could not be opened. I tried running the repair utlity to repair the iCloud however I am still getting this error message.

I tried rebooting. It didn't change anything.

Please Help... Sync BB8900 with Outlook 2007 and Vista.

I have trawled the web looking for an answer to this question and can't find any answers, please can somebody help me !!!
I have owned my 8900 Curve for about 2 months and love it, I used to sync it with my old computer running Windows XP and Outlook 2007 and had no problems.Unfortunately that computer died and I have upgraded to a new PC unning Windows Vista, my problem is this... When I try to set up the sync options for my calendar,contacts etc I don't get the option to sync it with Outlook, I only get the option to sync it with
1... ASC II Importer/exporter
2...Yahoo.
I rely heavily on my BB being up to date and without this function may as well go back to my old PDA.
I have tried re-installing Desktop Manager a few times and even downloading older versions of it to see if this fixes my problem, all to no avail.
Please,Please can somebody help.
Thank You In Advance.
Stuart

Hi,
By the "media control" I take it your were referring to the Vizkids Post, suggesting the mediad manager not be installed?
I didn't say that, I agree with it, but I didn't say it.
Stulew99 Wrote:
"Why we should have to do this I have no idea, surely if something is
sold with an application then it should work with the latest operating
system and latest outlook version)."
A friendly tip as this is your first thread, The User who suggested that has 4 more posts than you. He is new to the forum as well.
What worked for his problem, might not work for yours, in this case it wouldn't have affected it at all. When you get stuck or need some
research go to the upper left hand corner where the grey search box is. Type on keyword for your problem, I would put vista outlook 2007
desktop, to start. You will see the history of the problems reading those subjects. You will see green resolution marked on most
Follow those resolved threads and see how it relates to yours, and how it was resolved in the past. Be sure to write your search results in you thread other users can then see what you've tried and found and help you quicker
As you get more experience you will get good use from the Support and Services grey tab at the top of the page.
That's where the link I posted came from. Please take my comments the way they were intended, as helpful advice, OK?
I need some specifics on your Vista OS 32 or 64 bit?What version of desktop manage have you tried, removed reinstalled etc.?
Okay flesh things out a little, you installed desktop manager with full access rights as an administer on Vista,correct?
The installation was error free?
You setup the your email and when you went to configure the synchronization options, you had what options, I know
you didn't have Outlook.
What steps did you try to resolve the problem?
Did you change any settings in Outlook, review the desktop setup in the manual?
How far did you get on article I left you regarding MS Outlook tips?
Ok let me know the detail for those questions,thanks,
Regarding the clean procedure post, The first part of the procedure states:
"To install BlackBerry Desktop Software on a Windows® based computer that
had a previous version of BlackBerry Desktop Software installed,
complete the five tasks outlined below. These tasks should also be
completed if the BlackBerry Desktop Software installation or
uninstallation procedures did not complete successfully."
Going on, it explains and shows how to make sure all the registry entries, program files and remnants , along with file traces
were made In Vista and are completely removed. A lot of desktop manager issues especially in the Vista OS can be traced to old
registrations made by a previous DM installation.
Please let me know what parts are not clear.
Thanks,
Bifocals
http://na.blackberry.com/eng/deliverables/5837/BlackBerry_Desktop_Manager-4.7-US.pdf
Message Edited by Bifocals on 05-12-2009 03:29 PM
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

I have a rather old iMac 20" (mid 2007) and I want to upgrade the Hard drive. How do I change it? How do I transfer all my applications? May I just copy the old hd into the new one? Thanks.

I have a rather old iMac 20" (mid 2007) and I want to upgrade the Hard drive. How do I change it? How do I transfer all my applications? May I just copy the old hd into the new one? Thanks.

There are many online tutorials on how to change out the HD on a mid 2007 iMac. One of the originals is from 2007 and is Upgrade your iMac 20" or iMac 24" aluminum (mid 2007) to 1TB Hard Drive and 4 GB RAM - DIY Guide. As far as migrating your system Apple helps out with that in Setup Assistant which automatically starts when you turn on a new Mac for the first time. After you have installed the new HD you will have to format the new HD to Mac OS Extended (Journaled) and then you will have to install OS X. The first time you turn it on Setup Assistant will start. Follow the directions and you will be fine. In order to restore your information you will need to backup what is on the current internal HD first. I'd recommend using Time Machine (Assuming you are using Leopard or later) AND also creating a bootable clone using either SuperDuper or Carbon Copy Cloner.
Please complete your profile so at the very least we know what version of OS X your machine has installed.

MBP Freezes (have erased and installed, ran disk utility, and inc fan speed

Hi Guys, Any advice on this issue would be very much appreciated please.
Have had an original mbp for about 2 and a half years. Last few weeks it's been freezing between 1 and 5 times a day. By freezing I mean that the screen freezes and there's no cursor or keyboard fuctionality. Sound stops too. This happens using World of Warcraft, Pages, Office for Mac, and Safari, sometimes also the finder. Main culprit though is Safari and WoW. For comedy value, I'm a priest in WoW and it froze during a raid which resulted in the whole group wiping out! Great timing! lol
So far I have:
Ran disk utility, repaired permissions and verified disk.
Did a complete erase and install.
Downloaded Fan Control and set to 3400 base speed, left fan @ 3503 RPM and Right fan @ 3508 RPM - temp reads 46.9 oC (118 oF)
I'm guessing that since my erase and install, that it is very much a hardware issue as the problem has happened again.
Since I've done the fan thing, nothing has frozen so far but I only did it about an hour ago.
If anyone could offer any other suggestions in case it does freeze again I'd be very grateful indeed :0)
Oh - one thing I don't get is that only about 4 hours after my erase and install I did the disk utility once more (Repair permissions and verify) and it came up with the below list - which is huge given it was a fresh install. Not sure if the below info will help (not really sure what it's for tbh - but there it is.
Many thanks,
Vizzy
Permissions differ on "System/Library/Frameworks/CoreVideo.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/AirPort Base Station Agent.app/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanArrow.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanCheck.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanDisabled.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanArrow.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanCheck.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanDisabled.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
Permissions differ on "System/Library/Components/CoreMediaAuthoringPrivateComponents.component/Conten ts/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaAuthoringPrivate.framework/Versions/ A/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/Resources/AVC.plugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/Resources/IIDC.plugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/Resources/MPEGAudioDecoder.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/Resources/MPEGLayer2AudioEncoder.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/Resources/Tundra.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/Resources/VDC.plugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaPrivate.framework/Versions/A/CodeRes ources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Music.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Photos.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Podcasts.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/TV.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/BackRow.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/QuickTime Player.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/AnnotationInspector.propPane/Contents/CodeResources ", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/AudioSettingsInspector.propPane/Contents/CodeResour ces", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/DataRefInspector.propPane/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/HintTrackInspector.propPane/Contents/CodeResources" , should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/NetworkInspector.propPane/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/SettingsInspector.propPane/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/VisualTrackInspector.propPane/Contents/CodeResource s", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTime/QuickTimeComponents.component/Contents/CodeResources" , should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTimeJava/QuickTimeJava.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTime/QuickTime3GPP.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTime/QuickTimeFireWireDV.component/Contents/CodeResources" , should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTime/QuickTimeH264.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTime/QuickTimeIIDCDigitizer.component/Contents/CodeResourc es", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTime/QuickTimeImporters.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTime/QuickTimeMPEG.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTime/QuickTimeMPEG4.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTime/QuickTimeStreaming.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTime/QuickTimeVR.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "Library/Internet Plug-Ins/QuickTime Plugin.plugin/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Library/Internet Plug-Ins/QuickTime Plugin.webplugin/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/Frameworks/QTKit.framework/Versions/A/Resources/QTKitIBPlugin.i bplugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/Spotlight/QuickTime.mdimporter/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "Library/Audio/Plug-Ins/HAL/iSightAudio.plugin/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/Frameworks/QuickTime.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/Resources/QTMediaKeys.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/Resources/QTMime.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/Resources/QTTransport.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTPlugIn. prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTRegiste r.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTRegiste r.prefPane/Contents/Resources/QTAbout.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTStreami ng.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTUpdate. prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/iTunes.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents/ CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/CodeResou rces", should be -rw-rw-r-- , they are lrwxr-xr-x .
Group differs on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/CodeResources", should be 80, group is 0.
Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/CodeResources", should be -rw-rw-r-- , they are -rw-r--r-- .
Group differs on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/Info.plist", should be 80, group is 0.
Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/Info.plist", should be -rw-rw-r-- , they are -rw-r--r-- .
Group differs on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/MacOS/JavaPluginCocoa", should be 80, group is 0.
Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/MacOS/JavaPluginCocoa", should be -rwxrwxr-x , they are -rwxr-xr-x .
Group differs on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/MacOS", should be 80, group is 0.
Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/MacOS", should be drwxrwxr-x , they are drwxr-xr-x .
Group differs on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/Resources/Localizable.strings", should be 80, group is 0.
Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/Resources/Localizable.strings", should be -rw-rw-r-- , they are -rw-r--r-- .
Group differs on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/Resources", should be 80, group is 0.
Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/Resources", should be drwxrwxr-x , they are drwxr-xr-x .
Group differs on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/version.plist", should be 80, group is 0.
Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/version.plist", should be -rw-rw-r-- , they are -rw-r--r-- .
Group differs on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents", should be 80, group is 0.
Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents", should be drwxrwxr-x , they are drwxr-xr-x .
Permissions differ on "System/Library/Components/AudioCodecs.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "private/var/spool/cups/cache/rss", should be drwxr-xr-x , they are drwxrwxr-x .

According to Mactracker, your Mac could recognize 3 GB of RAM:
http://www.mactracker.ca/
One thing to check is your RAM usage while playing WOW. I am not a gamer, so I don't know if you can play with your Dock visible, but if you can, here is an easy way to keep track of your RAM usage.
Go to Activity Monitor (in your Utilities folder in your Applications folder) and put it in the Dock. Then while in Activity Monitor, go to View (in the menu bar)>Dock Icon and select "Show Memory Usage".
You want to see a lot of green in the pie chart. If you don't, you are running out of RAM and then the computer turns to your hard drive to fulfill the functions of RAM. This process is much slower, and I could see it resulting in freezes. If you find that the green virtually disappears while gaming, you could well benefit from upping the RAM by another 1 GB to 3 GB total.
Good luck!

I recently installed a new hard drive in a MacBook 2007 and then 10.6.3. I'd like to be able to Sync iCal to the calendars I have created on other devices (new iCloud account and an ME account). I can't upgrade to 10.7 or 10.8 because the MacBook is 32bit

I recently installed a new hard drive in a MacBook 2007 and then 10.6.3. I'd like to be able to Sync iCal to the calendars I have created on other devices (new iCloud account and an ME account). I can't upgrade to 10.7 or 10.8 because the MacBook is 32 bit. Just looking for a workaround as this is not a primary device.

You should update to the latest version of Snow Leopard, 10.6.8 - you can download it here; however it's still not compatible with iCloud and though you can connect to access your email you cannot access any other of iCloud's facilities.
However some people have been able to set up calendar syncing by using the method detailed here - this is an unsupported hack and may not be reliable, and may stop working at some future point. I've not tried it: use at your own discretion.
To access the email:
Entering iCloud email settings manually in Snow Leopard or Leopard
Are you sure you can't upgrade to Lion? It requires an Intel Core 2 Duo processor, which you may well have, though it also needs 2GB RAM so you might need to add additional RAM (might not be worth it for what you want). The published specs don't mention 32 or 64 bit. You can buy Lion by ringing the Apple Store at the number at bottom left of this page.

Mbp 2.16 2007 and cinemadisplay 20

Similar Messages

Maybe you are looking for