MBP 2.4GHz Core 2 Duo - Backlight off when booting to restore DVD

Hi all!
I have a very interesting issue and I'm not sure what to make of it. 
I have a MBP 15" (Core 2 Duo, Aluminim, NOT unibody) that shipped with 10.5.  I am restoring the OS with a 10.5 upgrade DVD (was not able to find my original restore disc for the unit).  Unit boots into the OS properly, all hardware works to spec.  However, when I boot to the DVD, the backlight goes out once the DVD is done loading.  There's no inconsistency, it doesn't "come back on if i wiggle it," nothing of the sort. If I cold boot the laptop and restart, the backlight works without issue.  Any ideas on what's causing this? 
Thanks!

Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.

Similar Messages

  • Macbook display turns off when booting Snow Leopard DVD

    I have mid-2009 Macbook Pro and I hate Mountain Lion. I want to do a clean install of Leopard using the DVD (grey) that came with my computer. I loaned it to a friend recently and he had no issues. But everytime i try to boot from the SL DVD (hold C at startup) it behaves normally, until about the time it would go into the DVD startup screen. At that point the display turns off (not the whole computer, just the display) as if it has gone to sleep. And I can't get it to turn on again. I've also tried booting and holding Option and choosing the DVD as the boot drive. No dice.
    Awhile back I created a Lion install DVD. I can boot to it just fine. But i don't want Lion either. Any ideas why this is happening?  Thanks!

    Press control shift eject, then any key to toggle the display from sleep/wake.

  • I have a 5 year old MBP, 2GHz Intel Core Duo, 1GB MHz, DDR2 SDRAM, running Snow Leopard, 10.6.8.

    I have a 5 year old MBP, 2GHz Intel Core Duo, 1GB MHz, DDR2 SDRAM, running Snow Leopard, 10.6.8.
    I use wireless to connect to the Internet and everything works fine when I sign on.  After being on line for awhile and my remaining battery power at about 60%, I lose connectivity.  I turn off Airport, restart it, and I am asked for my secure password.  I enter the password but cannot reconnect.  So, I shut down the computer for 5 to 10 minutes, restart, and everything works great again.
    Has anyone experienced this behavior and do you have any suggestions as to what is causing the problem.
    Thanks for any help you can give me.
    Lowell

    I think I hit the wrong key ... so here it is again!
    Thank you ...  I keep seeing this i5 and i7 processor mentioned and it is also recommeded that I stream using it. Do you have any suggestions on which MacBook would serve me better? Or is there an upgrade of any kind that will help me?
    Thanks again.
    D

  • Macbook Pro Core Duo shuts off intermittently

    my 2006 macbook pro core duo with 2gb of ram shuts off intermittently.
    here's what i've done to troubleshoot:
    tried running the hardware support disc by holding down D. it starts to boot the disc and then the computer shuts off. it does this without fail right when the disc starts to boot. the screen flashes a few times and then kaput.
    i've tried installing snow leopard. it turns off right around the 25% mark.
    i've taken a very large house fan and pointed it directly at the exhaust vents of the computer. the computer stays MUCH cooler to the touch when doing this as i suspect(ed) the exhaust fans are broken. it doesn't help. the computer turns off when booting the hardware disc (at the same point) and while installing snow leopard.
    i've taken the two 1gb dimms out and tried to install snow leopard utilizing each of them (1gb at a time) and it still dies.
    any suggestions? if i can't get apples hardware testing tool to run and i can't install an OS, what are my options?

    what are my options?
    Resetting an Apple portable's System Management Controller (SMC)
    http://docs.info.apple.com/article.html?artnum=2238
    Take your computer to an Apple store or an AASP.

  • Backlight shuts off when booted on Leopard Install DVD

    Booting my macbook pro on the optical drive (by holding the "C" key at power up),with the Leopard install DVD causes the backlight on the display to shut off. Reboot with the OS on the hard disk (OS 10.4) and the display works fine. Playing with the screen brightness keys has no effect on the backlight when booted on the DVD. I also did a pmu reset (remove battery and hold the power button for 5 seconds) The display functions normally during regular use, It only happened when booted on the leopard install DVD. I was able to complete the install with a 2nd display connected to the dvi port and the display now works properly when booted under 10.5. Just wondering if anyone has seen this behavior or has an idea of the cause.

    I have the same issue. Can some one please help? Thanks

  • Printing problem for MBP 2.16 Core duo

    just got this sweet thing. was running a G4 iBook and printing easily to an HP 2600 color laser.
    in switching to the MBP, tho, I can still print but in MS Word, the text is shrunk to 30% of actual size. In preview, everything is fine but the output continues to stay small.
    i've looked thru all the preferences and the print utility app but have found nothing to make an adjustment to.
    any help greatly appreciated! TIA
    MBP 2.16 core duo   Mac OS X (10.4.8)   problem in MS Word

    i fixed it. threw away the MS Word preferences and all is good.

  • Can my MBP (April 2006, Core Duo) run Lion?

    ...Or does Apple have me in a corner again?

    Sorry to contradict OrangeMarlin but only the Late 2006 MBP (and later) models do have a Core 2 Duo which is the minimum processor for Lion.
    The Eraly and Mid 2006 MBPs have a Core Duo processor and therefor don't meet the requirements for OSX Lion:
    General requirements
    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    2GB of memory
    OS X v10.6.6 or later (v10.6.8 recommended)
    7GB of available space
    Some features require an Apple ID; terms apply.
    Some features require a compatible Internet service provider; fees may apply.
    Stefan

  • When I use my 5 year old MBP on battery it suddenly shuts off when the battery life reaches 88%.  Anyone know why and how to fix it?

    when I use my 5 year old MBP on battery it suddenly shuts off when the battery life reaches 88%.  Anyone know why and how to fix it?

    Model Information:
      Manufacturer:          Sony
      Device Name:          ASMB012
      Pack Lot Code:          1
      PCB Lot Code:          0
      Firmware Version:          110
      Hardware Revision:          500
      Cell Revision:          303
      Charge Information:
      Charge Remaining (mAh):          4108
      Fully Charged:          Yes
      Charging:          No
      Full Charge Capacity (mAh):          4200
      Health Information:
      Cycle Count:          40
      Condition:          Service Battery
      Battery Installed:          Yes
      Amperage (mA):          0
      Voltage (mV):          12361

  • MBP 2.16 core duo networking slow

    Hi
    My 2.16 MBP Core duo seems to be having networking speed issues. When I first got it in September 2006, I was seeing bandwidth speeds on my home wireless network comparable to a wired computer on the same router (Apple Extreme base station, comcast cable modem), 2 to 2.5 Mbs. However now I'm only getting 600-700 Kbs on the MBP, yet the older (1 Ghz G4) iMac is still getting the higher rate. Thinking it was a wireless problem, I turned off the Airport card and connected the MBP directly to the cable modem. Unfortunately, I still get a bandwidth connection about one third that of the old iMac.
    Any troubleshooting ideas? Thanks!
    MacBook Pro 2.16 core duo   Mac OS X (10.4.8)  

    This problem has been on several threads. I thought the new release for the Airport update would fix it. To date I have:
    Retrograded back to 10.4.7. This fixed the speed problem.
    Today I reloaded 10.4.8, upgraded with the past 2 months of security fixes and the new Airport update. The speed problem has returned - about 1/10 the speed as before - really crawls.
    I still believe it is an issue with the original dual core (not the 2's) and 10.4.8. I will now go through the process of reloading the original OSX from the install disk, then run the 10.4.7 combo update. Thankfully I downloaded that 143 MB chunk before I went back to 10.4.8. Good luck, but I think there is a very deep problem with .8 that hasn't been addressed for us early intel adopters.

  • MBP 1.83 Core Duo

    I currently have the MBP Core Duo 1.83.
    Question I have... Does anyone know if I am stuck with this processor or can I upgrade if purchase the Core 2 Duo Chip?
    Also is getting an external HD the best way to upgrade my capacity and speed?

    As everyone else has said, and as you can see in the following pic, the CPU is not like ones found in PC desktops. Laptops, because of their size and design, have very limited upgrade capabilities.
    http://www.ifixit.com/Guide/85/images_large/44.jpg
    If it makes you feel any better, the difference between a 1.83 GHZ and a 2.0 GHZ is nigh unnoticeable. More RAM and a 7200rpm drive will give you noticeable speed increases. Conversely, a handful of MHZ won't do much at all. Don't get caught up in the 2001 clock speed hype. A computer is much more than it's clock speed.
    Look at it this way. You have 3 dams, each lets through some water. The first lets through 100 litres of water a minute, the 2nd, 200 litres, the 3rd, 300 litres. If you are sitting at the first dam, and want more water, would it help you to increase the 2nd dam's size to 500 litres? Of course not. If you were sitting at the 2nd dam, you would see more water if you increased the size of the first dam. If you were at the 3rd, then increasing the size of one of the first two, or both, would help get more water to you.
    Basically it's the same thing with a CPU (obviously more complex). But, the analogy still holds. Most things slow down even before they hit the CPU, so it wouldn't matter making them any faster. There are components (such as hard drives) that are extremely far behind any other component.
    Remember, your PC is only as fast as its slowest component. Be it that some things you do, do sometimes circumvent that component, irregardless, it will still ultimately affect day to day use.
    Be aware that external hard drives are either USB 2.0 or firewire (400 or 800; the latter only supported in the 17" MBP or the new C2D 15" MBP).
    The data transfer rate of USB 2.0 is 60 MB/s. Firewire400 is 50 MB/s, while Firewire800 is 100 MB/s. SATA is 300 MB/s. As you can see, an internal hard drive is a much better choice as most hard drives advertise a transfer rate of around 150 MB/s.
    Here is a rundown on the latest Toshiba 200 GB, 4200rpm drive:
    http://www.techgage.com/article/toshiba200gb_4200rpm_25_harddrive

  • Mac Mini vs. MBP 2.16 Core Duo Performance

    I currently have an MBP that has an external Firewire 400 RAID. I'm considering buying the high version of the Mini. Would this perform Core 2 duo better than my older MBP that has the earlier Core Duo?
    I'd like to do a little photo and video editing. So if there was an advantage in the Mini I'd probably pop for one. I suppose I should really be looking at an iMac as a fully loaded Mini seems to approach the price of an iMac.

    Thanks Boece, I didn't realize that. I'm thinking an iMac would probably be a better choice for me then. The price difference is not so great that the benefits would not be worth it. I fooled around with a Mini over the lunch hour and it did not seem as quick in Finder as my older MBP. I forgot to look at the memory in the demo Mini, so it might not have been a fair comparison. My older MBP also has a 7200 RPM HD (along with 2 gigs of memory)
    I'm not knocking the Mini. I am wondering in this current environment how much sense the Mini makes these days? It seems to me that the Mini out be be priced a little lower than it is.

  • I have a MacBook Pro 3.1 2.4ghz core duo 2gb ram

    Hi i am currently running ios10.8.5 mountain lion perfectly fine with no issues at all some people said i would not be able to run ml on this macbookpro without upgrading the ram etc just wandered if it runs mountain lion ok will it run mavericks ok.

    You can run OS X Mountain Lion with 2 GB of RAM, but you cannot be sure that it will work correctly.
    "MacBookPro3,1" belongs to the Late 2007 MacBook Pro, so it is compatible with OS X Mountain Lion. However, you say your MacBook Pro has got an Intel Core Duo processor, when it should have got an Intel Core 2 Duo processor. You can check which processor you have in  > About this Mac.
    I recommend you to upgrade RAM. You can buy more RAM at OWC or Crucial.
    The latest OS X version is Mavericks and it is free, so you may want to install it instead of OS X Mountain Lion. You can download it from the Mac App Store. If you want OS X Mountain Lion, you can buy it in the Apple Online Store > http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion

  • MBP 2.16 Core Duo - ProRes

    Hi Everybody,
    I have the original Macbook Pro with 2.16 Intel core Duo processor not the core 2.
    My questions is will I be able to edit 1080i prores - not hq on this machine or do I need to upgrade? I plan to capture on the new AJA Ki Pro.
    If so, how many streams are likely to be possible - I'm using external raided fw800 drives - minimal effects just cuts.
    cheers,
    Simon

    Simon,
    It should work, however i think it will depend on your FW800 drives.
    For the maximum streams (you mean video layers?) you probably will have to try and test it yourself. Unless there is someone here with the exact same hardware...
    Steve

  • 3.2 update crashes on launch on MBP 2.16 Core Duo chip

    I have a 17" MacBook Pro, 2.16 Core Duo, 2GB Ram, OS 10.6.8.  I just upgraded Aperture to 3.2 from the previous latest version (3.1.?) and now the program launches, starts to load the previews and then quits!  Every time!  Apparently, Apple still has some work to do with this update.  Now I will have to test my Time Machine backup and restore it to the previous version.  Crossing my fingers...

    I have a 17" MacBook Pro, 2.16 Core Duo, 2GB Ram, OS 10.6.8.  I just upgraded Aperture to 3.2 from the previous latest version (3.1.?) and now the program launches, starts to load the previews and then quits!  Every time!  Apparently, Apple still has some work to do with this update.  Now I will have to test my Time Machine backup and restore it to the previous version.  Crossing my fingers...

  • Macbook Pro Core Duo froze and now boots into grey screen

    I was using my macbook pro (core duo) and just had a few apps open when it froze. I could still use my mouse but nothing else was working including force quit.
    When I restarted my computer, it did the spinning wheel and apple screen and then went straight from that to a grey screen, to never come back again. Sometimes it flashes to black before entering the grey screen.
    I did applejack and it finished with no errors...
    I booted with the command option p and r.
    I tried verbose and it gets past that and then gets stuck again at the grey screen.
    Safemode boots and works fine (except my airport isn't detected) and probably some other things don't work.
    I searched through other problems but couldn't find one that fit these specifications.
    Any help would be graciously appreciated.

    If safe boot works then it is probably a startupitem, launchagent, or launchdaemon that may be failing.  Look in your /Library/LaunchAgents, /Library/LaunchDaemons, and /Library/StartupItems.  All these are suppressed in a save boot.  You could start experimenting by removing all you see in those.  Or if you have some hunch of what may be a possible culprit delete that. Or one at a time.  Whatever.
    When I say delete I mean just temporarily remove them.  Observe ownership and permissions when putting them back.
    Note, I don't know why any of those items would suddenly start to fail just because you machine went south.  Perhaps some plist or other data got corrupted.

Maybe you are looking for

  • Cannot install Camera Raw 7.2 update

    Hi there, i used abobe download asstant to download and install elements 11. then used elements - help - updates to download and install raw 7.2. however i cannot open any of my rx100 raw .arw files. camera raw is not listed in   help - about plugin

  • Photoshop CS6 Extended 3D funktioniert nicht

    Hallo zusammen, ich habe ein kleines Problem mit meinem Photoshop CS6 Extended. Das 3D Menü ist komplett ausgegraut / inaktiv, sodass ich dort nichts anwählen kann. Auch in den Kontextmenüs bei Ebenen usw. sind alle 3D Optionen ausgegraut. Installier

  • Scan to printer over wireless network

    Hi there,  I have the pixma mx882 printer and it is configured over my wireless network. I am trying to locate the scanning software that enables me to scan via the wireless network?. I tried the MP Navigator EX V4.1.3, although it says I need to con

  • PLEASE HELP: Cutting up PDF spreads down the middle, into individual B5 pages

    It seems so simple and yet I can't figure it out, help will be much appreciated. I have a bunch of files which were made in B4 spreads (Japanese paper size 14.3 x 10.1 inches), two pages of B5 standing next to each other, and I'd like to split it dow

  • Moving computer in PSE 7

    We moved our files to a new computer but did not back up our catalog in PSE.  Now we can't access the pictures on the new pc, but files are all there.  Any suggestions on what we can do? Thanks