MBP 2011 does not find wifi

My new MBP (2011) will not find my wifi even in the same room?
Andy Idea's why?
Thanks M

Is it WPA2 encrypted and a closed network?  Sometimes you have to manually specify the network settings by Connect to Other... from the Airport menu when the network is closed.

Similar Messages

  • New Retina MacBook Pro does not find WiFi after booting

    My Retina MacBook Pro keeps looking for WiFis after it has booted, but does not find any.
    I have to explicitly turn WiFi off and on again after booting to get it working.
    When I put the MacBook to sleep and wake it, the problem does not occur.
    Any hints what could be the problem?

    Not sure if this will help, but you can go into System Preferences > Network and, if you haven't already, create a new location (mine is called "home"), then from this location remove all connection methods from the left column except Wi-Fi. Also, click on "Advanced" and remove anything from the Preferred Networks list that you aren't using. Then click on "OK" and "Apply".

  • MBP 2011 Does Not Enter Display Sleep Over DVI with Dell U2410

    Hi, 15" 2011 MacbookPro (8,2) running 10.7.2 Lion
    Using the Apple Mini DisplayPort-to-DVI adapter, the Dell U2410 does not enter Display sleep in Energy Saver mode. Instead, the backlight remains on.
    If I manually put the MBP to Sleep, the U2410 successfully enters Display sleep.
    When using a MonoPrice Mini DisplayPort-to-DisplayPort cable, the monitor successfully enters Display Sleep. However, the picture signal (no matter what) is dispalyed in YPbPr rather than RGB for some reason. So this thread is in fact 2 problems.
    Any ideas / help?

    My late 2007 white MacBook (3,1) running 10.6.8 connected via MiniDVI-to-DVI successfully puts the U2410 to sleep.
    So I'm thinking this may be an issue with the MDP/Thunderbolt port on the new 2011 MBP's?

  • My early 2011 MBP 13" does not recognize my Sandisk 16GB 45MB/s Extreme Pro SDHC card.  I went to the Genius Bar and we tried it in all the MacBook Pro's in the Apple Store and NONE could recognize the card.  However, iMacs did.  Any suggestions?

    My early 2011 MBP 13" does not recognize my Sandisk 16GB 45MB/s Extreme Pro SDHC card.  I went to the Genius Bar and we tried it in all the MacBook Pro's in the Apple Store and NONE could recognize the card.  However, iMacs did.  Any suggestions?  Genius behind the Bar suggested wait for LION OS X release...

    You really don't need to post multiple times, you will get attention eventually.
    Find the reply here:
    MacBook Pro 13 (MBP 8,1 random restarts)

  • My iMac does not find my wifi printer or my Chromecast.

    My iMac does not find my wifi printer or my Chromecast. I was able to ping the chrome cast and printer and I'm able to connect to these devices with my windows computer, iPhone and iPad. I have OS X 10.9.2. I'm able to print by setting up the printer using the IP address that was assigned by my router instead of letting my iMac do the finding. It seems that the iMac either does not like the info that is receiving or something is blocking the signal (other than the firewall, which is off). Could someone have an idea what the issue might be?

    Hi MikeMart0923,
    If you are having issues adding or connecting to your WiFi printer from your iMac, you may find the following articles helpful (apologies if you have already seen them):
    OS X Mavericks: Set up a printer
    http://support.apple.com/kb/PH14143
    OS X: Connecting a Wi-Fi printer to your Wi-Fi network
    http://support.apple.com/kb/ht3500
    Note: This is assuming you have a simple network configuration, with only a single router/WiFi access point.
    Regards,
    - Brenden

  • I have the latest ipad2 and trying to print a doc. It does not find my printer . My printer is a canon mp990 wifi

    I have the latest ipad2 and trying to print a doc. It does not find my printer . My printer is a canon mp990 wifi. Can anyone tell me what I am doing wrong?

    Hi,
    If you are trying to utilize AirPrint you need an HP compatible printer listed here.
    http://www.apple.com/ipad/features/airprint.html
    Scroll down.
    Carolyn  

  • My new Ipad 2 wifi does not charge and itunes does not find my device when pluged into my pc

    My new Ipad 2 wifi does not charge and itunes does not find my device when pluged into my pc. Help

    You should probably start here and go through all of the troubleshooting steps and then report back if you are still having problems.
    http://support.apple.com/kb/TS1538

  • Ipad does not find printer

    I have new Epson printer with airprint possibility. Printer is on wifi and iphone can see it and print files. but ipad does not find printer at all?

    Apple has some troubleshooting tips at the bottom of this page that may help:
    http://support.apple.com/kb/HT4356
    Regards.

  • Windows 8.1, BootCamp does not find the ISO image.

    When I try to install Windows 8.1, BootCamp does not find the ISO image.
    I purchased Windows 8.1 Pro, I downloaded the .exe requested file from a Windows computer, performed the steps recommended by Microsoft in order to create the ISO file saving it on a flash drive as well and, as a precaution, on a DVD too.
    I performed the "Download the latest Windows Support Software from Apple" step directly into another flash drive and having it completed BootCamp displays the following message:
    "The installer disc could not be found  –  Insert the Windows installer disc and wait a few seconds for the disc to be recognized. "
    So happens that I have tried this using the DVD, pendrive and also copying the ISO file to the desktop and to the "Documents" folder as recommended in certain websites, but none of this has made the process go ahead. What can I do?
    My equipment is a mid 2011 iMac running Mac OSX 10.10.1.

    Dear Loner T,
    thanks to my coworker, the solution was unpacking from that ISO file which I had recorded (according to the steps indicated by Microsoft), but now using Nero software (Windows) and then recording by the most common way in a new DVD. See the screen of the first DVD before unpacking:
    This true saga only demonstrated that the generated ISO file as an option at the time of the Windows installation, is not for direct installation through BootCamp, and as a I could check, even for direct installation on a Windows PC. See the last DVD burned using Nero and  again recorded:
    The execution of BootCamp, was perfect
    Thank you for attention to my problem!

  • After installing Mavericks iTunes 11.1.3 does not find my recent iTunes Library. Where did my current library go?

    After installing Mavericks iTunes 11.1.3 does not find my recent iTunes Library. Where did my current library go? The new iTunes opens a 2009 library on start up. My most recent library is ignored even when I go to it directly and start iTunes with it. In another thread someone suggested repairing permissions, I did that and it did not help. I ripped my entire CD collection over the summer (1000's of songs) and now they just don't exist...or I can't find them. They were there before I upgraded to Mavericks the other day. Now vanished. I have found no other issues with Mavericks (yet). Played the music last week; upgraded, now can't find my complete current library. If anyone has a clue as to what might be causing this I sure would like know. Thanks to anyone who can help.

    Hi, sorry to hear you had this problem. Sometimes after updating iTunes the library appears blank because a new library (.itl) file has been created. Anyone else experiencing this issue may be able to resolve by following the steps outlined in TS1967. There is ofter a 'Previous iTunes Libraries' folder in the iTunes folder, by quitting iTunes entirely and replacing the currently named iTunes Library.itl file with the library file named by date in the Previous Libraries folder (should look something like 'iTunes Library 2011-08-03') and renaming to 'iTunes library.itl' and relaunching you should find the library looks the same as it did before updating (metadata intact).

  • Apple TV3 not find wifi connection

    Apple TV3 only works on Ethernet cable not find wifi ?
    If I connect the ethernet cable finds wifi connecting when the ethernet cable disconnecting from apple tv not find Wifi.

    Does it broadcast ssid?
    Wha encryption is used?
    Hve you updated the firmware of the router to the lates from the router maker?

  • Can I migrate from mavericks to mavericks server. Have tried using a hard drive but the but the sever does not find the migration backup when it's searches. Any help out there?

    Can I migrate from mavericks to mavericks server. Have tried using a hard drive but the but the sever does not find the migration backup when it's searches. Any help out there?

    Is the HDD in the 2009 15" MBP dead?  (The original source of your data)  If not, you might want ot take it out and put it in an enclosure.
    You might try spotlight on know files to see if that gives you any clues where your data is located.
    You might down load from the Internet OmniDiskSweeper (free) and open it.  It should show you all of the files you have on your MBP and enable to locate them.
    Ciao.

  • Number range for trans./event type WA in year 2011 does not exist.

    hi experts while stock posting iam facing this problem kindly guide me

    Hi akreddi,
    Please search the forum  you will find the answers before posting the thread
    Number range for trans./event type WE in year 2011 does not exist
    no range for trans/event type WA in year 2011 does not exist
    Regards
    Pradeep

  • Software Update- it does not find an update for iWork '09 and '08

    I had a hard drive crash and after a trip to the Genius bar to fix and restore it, I have to reinstall all my software. Among that list of things is iWork '09 and '08. They are listed appropriately within the Applications folder, but no matter how many times I run Software Update- it does not find an update for either suite. I'm running 10.6.8 on a 2.8GHz Core 2 Duo MBP from 2009. Any idea why this is happening? I need my full functionality back as I need to be able to open and create/edit .doc and .docx files.
    <Re-Titled By Host>

    The latest versions of the iWork '08 apps are x.0.3. The latest of iWork '09 is 9.3 although you don't need higher than 9.0.4 for Snow Leopard. If you're not running the latest versions of the iWork apps installed from a retail box or the downloaded trial & Software Update says your software is up to date, make sure the applications are where the installer initially put them. The updaters are very picky. If the location is not where the updater is programmed to look or if the folder doesn't have the name the updater looks for, it will not work. The applications cannot be renamed or moved. If you installed from the downloaded trial or the retail box, they must be in the iWork '09 folder in Applications. That iWork folder must be named iWork '09. If it doesn't have the '09 Software Update won't find them & the updaters won't work. The same applies for iWork '08.
    You can also download the standalone updater for iWork '09, 9.3, from this page.

  • TS2570 iMac does not recognize wifi keyboard and track pad... cursor stays in top left corner under apple ?...

    iMac does not recognize wifi keyboard and track pad... cursor stays in top left corner under apple ?...

    Phillip,
    I had this problem recently with a 3-year old Mac Pro intel, which was eventually replaced by Apple due to myriad other problems. When the frozen mouse happened, there was nothing I could do. Very frustrating to have the screen boot and the cursor is up there stuck, on the top left corner of the screen. Frozen. I called support several times. They were amazed. At one point they had me buy a cheap USB mouse (I was using a wireless mouse from Logitech and they thought there might be some kind of conflict). The USB mouse didn't work, either. Neither did an Apple mouse when I went out to buy one.
    I ended up driving 70 miles to take the Mac to an Apple Store. I think they reinstalled the (Leopard) system in some secret way, because when the mouse was frozen so was everything else and I couldn't open the disk drive to put the OSX disk in there.
    Why I'm here right now is that the same thing happened today with my NEW 3-month-old REPLACEMENT MAC PRO using its brand new wireless mouse, and I was hoping to find some insight. Again, a frozen cursor after the boot. Same top-left corner of the screen. Unlike you, when I click the mouse nothing happens -- no drop down.
    Luckily, when I hard-rebooted by holding the button in, the mouse cursor came back. This time. Now I am afraid to turn my computer off. Been there done that before. Anyone have suggestions?
    Thanks in advance.

Maybe you are looking for

  • SVG: Chart error: ORA-20001:

    Hi, We are using 1.6.1.00.02 . I got a problem with SVG chart. The query returns following error: SVG: Chart error: ORA-20001: bar_char_error ORA-20001: get_data_error: ORA-20001 Fetch error: ORA-01782 The column names are correct. The same query wor

  • YouTube Videos not working in Safari on iPad 2

    When I use YouTube in Safari on my iPad 2, I noticed that the official music videos are not working in YouTube. I get an error message which states "Video cannot be played on mobile." Below is a link to the all time most watched videos. Not music vid

  • What exit is available to change EKPO-EVERS

    Hi What exit is available to change Purchase order line item field Shipping instr(Delivery tab) [EKPO-EVERS] before PO save? Thanks Rama

  • Solaris 9 and Sun ONE 6.1 SP5 open socket issue

    Hi We have recently migrated to Solaris 9 environment with Sun ONE 6.1 SP5 webserver (previously using Solaris 8 with Sun ONE 6.0). My problem is this that I have our product installed on Sun ONE webserver and every day I need to restart the virtual

  • 802.1x EAP PEAP MSCHAPv2 on Windows 7 Client.

    I have problems autenticate a w7 client at our Enterprice WiFi network. XP, Apple clients and all SmartPhones works fine...  We use Radius assigned Vlans based on username and ream routed on our Meru Network to Navis radius as centralied point of aut