Mbp 2011 screen freezes and beeps
My 2011 MBP 13.3 will freeze, displaying short bars across the screen in columns, audio beeps three times in intervals. I must hold the power button down to reboot.
Some things you can try:
1. Try a new user account, create one in System Preferences -> Users and Groups, test to see if the issue still persists in this new user account, this will give us a lot of information. (if the problem is the same or it vanishes, let us know)
2. Make sure all your software is up-to-date, Apple Logo -> Software update.
3. Unplug all 3rd party devices, just keep in the necessary, Power, Keyboard + Mouse, no ethernet or external hard drives etc.
4. Reset the PRAM http://support.apple.com/kb/PH4405
5. Reset the SMC http://support.apple.com/kb/HT3964
6. Boot to the recovery partition (CMD + R on startup until you see a spinning cog with an apple logo, then let go) -> Choose english as the main language -> Choose Disk Utility -> Select your hard drive from the left pane of Disk Utility (NOT Macintosh HD, the one that will look similar to: 1TB ST3200WAJS) -> Select the 'First Aid' tab -> Bottom right of the window it will say 'S.M.A.R.T Status: ________' ... What does it say after smart status?
7. While still inside the Recovery Partition, select Macintosh HD -> First Aid (tab) -> Verify Disk -> Repair Disk (unless it says the volume Macintosh HD appears to be OK) -> Verify Disk Permissions -> Repair Disk Permissions (if there are differing permissions on the disk)
Let us know if the issue still persists, but make sure you do all of those steps correctly and post back as much information as possible (PRAM takes two chimes at startup, unplug the power cable for 15 seconds, plug it back in, wait 5 seconds, turn on... make sure you follow all articles)
Good Luck!
MiiCK
Similar Messages
-
IMac 2011, screen freezes and fans start spinning
Hello,
I have this really wierd problem with my iMac i5 2011 edition since a month or so...
A lot of times when I am downloading or watching a movie or playing games under OSX on my iMac my screen slowly freezes, it always starts with my finder and then te rest goes, I get the marble of death and shortly after that the fans start spinning like crazy, they start slow but after a minute or so they make a lot of nice. Take in mind then I am unable to use my iMac in anyway, the mouse moves but it doesn't respond to clicks and also my keyboard doesn't respond, I keep getting the marble of death still.
The wierd thing is that sometimes it doesn't do this for 2/3 days and sometimes it does it like 3/4 in an hour (have to restart manually). Also, this is very interesting, I have a version of Windows 7 installed on my iMac wich I use mainly for gaming and under windows it NEVER freezes in any kind, even when I game like 5/6 hours long straight.
Therefor I thought it must be a software problem so I did a complete system reboot 2 days ago but that didn't help, already froze 3 times since...
Can anyone help me? I still have 2 months of applecare but I have a LAN party soon so I am not to anxious to go 3 weeks without my iMac, maybe there is a simple solution that I am missing...Some things you can try:
1. Try a new user account, create one in System Preferences -> Users and Groups, test to see if the issue still persists in this new user account, this will give us a lot of information. (if the problem is the same or it vanishes, let us know)
2. Make sure all your software is up-to-date, Apple Logo -> Software update.
3. Unplug all 3rd party devices, just keep in the necessary, Power, Keyboard + Mouse, no ethernet or external hard drives etc.
4. Reset the PRAM http://support.apple.com/kb/PH4405
5. Reset the SMC http://support.apple.com/kb/HT3964
6. Boot to the recovery partition (CMD + R on startup until you see a spinning cog with an apple logo, then let go) -> Choose english as the main language -> Choose Disk Utility -> Select your hard drive from the left pane of Disk Utility (NOT Macintosh HD, the one that will look similar to: 1TB ST3200WAJS) -> Select the 'First Aid' tab -> Bottom right of the window it will say 'S.M.A.R.T Status: ________' ... What does it say after smart status?
7. While still inside the Recovery Partition, select Macintosh HD -> First Aid (tab) -> Verify Disk -> Repair Disk (unless it says the volume Macintosh HD appears to be OK) -> Verify Disk Permissions -> Repair Disk Permissions (if there are differing permissions on the disk)
Let us know if the issue still persists, but make sure you do all of those steps correctly and post back as much information as possible (PRAM takes two chimes at startup, unplug the power cable for 15 seconds, plug it back in, wait 5 seconds, turn on... make sure you follow all articles)
Good Luck!
MiiCK -
I just got my Mac Pro repaired from Apple but I am experiencing the same issue: Screen freezes and shows funny rectangular bars. I shut it down manually and when I try to turn it back on it beeps 3 times. I know its the RAM but is there a way I can fix it
If you just got it back and it isn't fixed or something else is wrong with it take it back and have them do the repair correctly.
-
MBP 13" 2011 i7 crashes and beeps, help
MBP 13" i7 crashes and beeps:
http://www.youtube.com/watch?v=me5QEk8Ky44
this is a hardwaretest error code:
http://dl.dropbox.com/u/14153045/photo-2.JPG
4MEM/63/40000000: 0x8530a718
can anyone tell me for what it stands for?Answer: one ram module died
-
MBP 2011 Screen brightness changing regardless of the ambient light
As stated in the subject my brand new MBP 2011 screen brightness changes on its own, yes i know about the ambient light sensor, but my screen is going from med brightness all the way to minimum brightness even though the ambient light is constant. yes I know i can turn it off, but why build in an ambient light feature that just makes the screen go to mimimum brightness when in a well lit room??
or do i have a faulty one??I too have this problem on my spanking new MacBook Pro. Called AppleCare and they said they weren't aware of this issue.
Meanwhile, this is my 1st mac. Had it for a few weeks now. Decided to open iTunes for the 1st time. The whole MacBook Freezes, no mouse interactivity, reboot required. This happens EVERY time I start iTunes which I no longer do. Apparently it's a known issue which Apple has patched(unsuccessfully). But hey c'mon, I mean iTunes? This is one of the core apps which SHOULD be tested extensively against the hardware. When you consider Apple PROVIDES the hardware, this is simply unacceptable. Unbelievable even. I simply can't believe how poor this is from a major company. But hey my MacBook Pro LOOKS GOOD right, so who cares if it's a technically malfunctioning piece of junk.
Here's my theory. Is part of Apple's patch deliberately reducing screen brightness without user authorisation when the MacBook starts to overheat, all because they know they've been incompetent/negligent with their QA testing and the hardware can't handle the software? If so, why have users not been informed?
I'm from Australia and we have this so-so comedian called Chris Lily who fans have taken to calling a genius, the joke amongst non-fans being the word genius has been dumbed down over the years to be almost meaningless. Anyway, maybe a certified Apple 'genius' can explain the reasoning for the apparently deliberate brightness reductions? -
My iMac screen freezes and a grey colour slowly creeps down my screen
Hi, my iMac screen freezes and a grey colour slowly creeps down the screen and has a large black square in the centre saying "You must restart your computer by pressing the power button and then pressing it again to restart" or words to that effect in English and about 4 or 5 other languages. I find this happens more frequently when I try to stream movies or tv shows. It also happened when I was trying to download a couple of tv shows from iTunes.
It also sometimes makes a wierd sound a kind of loud noise like a record stuck in a groove. This has happend many times since upgrading to Lion. I hear a lot of people on here talking about their screens going completely black and not responding. I believe that mine has only gone black a couple of times and I couldn't wake it up from "sleep mode" with the mouse or keyboard. I don't know if this is also happening to other people, but my bluetooth keyboard keeps disconnecting all the time since the upgrade as well, it's driving me nuts!! Plus my wifi will show that it is fully operational, however, I can't use the internet when I wake my computer from sleep mode. I have to click on wifi and turn wifi off then on again before i can use it.
Is Apple going to come out with a fix or are we going to eternally suffer indefinitley.Hi Eric,
I don't know why it didn't work before, but here is the most recent errol log. It crashed again about an hour later. If there is a solution, i would greatly appreciate knowing what it is because I can't enjoy using my computer anymore because of these constant crasahes.
Thanks for your time.
Interval Since Last Panic Report: 1060363 sec
Panics Since Last Report: 12
Anonymous UUID: 065BD067-AFE6-4AB4-AEF2-30EF089ECE4C
Mon Oct 3 16:08:51 2011
panic(cpu 0 caller 0xffffff80002c268d): Kernel trap at 0xffffff7f80eb7282, type 13=general protection, registers:
CR0: 0x0000000080010033, CR2: 0x00000001006de5dc, CR3: 0x0000000035e9a003, CR4: 0x00000000000206e0
RAX: 0x00000000fffd1485, RBX: 0x0ae8df8948ee7500, RCX: 0xffffff800c5d1d74, RDX: 0xffffff807fbf3584
RSP: 0xffffff807fbf3310, RBP: 0xffffff807fbf3370, RSI: 0xffffff807b04a000, RDI: 0xffffff8000289003
R8: 0xffffff806af44e34, R9: 0xffffff807b04a078, R10: 0xfffffffffffffffe, R11: 0xffffff80002d8240
R12: 0xffffff807b04a000, R13: 0xffffff800c5d1d6c, R14: 0xffffff8000289003, R15: 0x00000005b80002a8
RFL: 0x0000000000010282, RIP: 0xffffff7f80eb7282, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x00000001006de5dc, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff807fbf2fd0 : 0xffffff8000220702
0xffffff807fbf3050 : 0xffffff80002c268d
0xffffff807fbf31f0 : 0xffffff80002d7a3d
0xffffff807fbf3210 : 0xffffff7f80eb7282
0xffffff807fbf3370 : 0xffffff7f80e9dfe5
0xffffff807fbf3510 : 0xffffff7f80ef8726
0xffffff807fbf3570 : 0xffffff7f80ef8985
0xffffff807fbf35b0 : 0xffffff7f80e869ee
0xffffff807fbf35c0 : 0xffffff7f80eb7bb5
0xffffff807fbf3630 : 0xffffff7f80e83879
0xffffff807fbf3670 : 0xffffff7f8091d255
0xffffff807fbf36b0 : 0xffffff8000639d0e
0xffffff807fbf3700 : 0xffffff7f8091d1d6
0xffffff807fbf3720 : 0xffffff7f8091d793
0xffffff807fbf3760 : 0xffffff7f8091cd81
0xffffff807fbf3790 : 0xffffff7f80e429e9
0xffffff807fbf37e0 : 0xffffff8000344b0b
0xffffff807fbf38f0 : 0xffffff80003c333d
0xffffff807fbf3b60 : 0xffffff80003caee9
0xffffff807fbf3c00 : 0xffffff80003cb3de
0xffffff807fbf3df0 : 0xffffff80003d2a6b
0xffffff807fbf3e10 : 0xffffff8000580f25
0xffffff807fbf3e60 : 0xffffff8000581185
0xffffff807fbf3e80 : 0xffffff8000532ec4
0xffffff807fbf3ee0 : 0xffffff8000533dd3
0xffffff807fbf3f20 : 0xffffff8000533ea7
0xffffff807fbf3f50 : 0xffffff80005ca88b
0xffffff807fbf3fb0 : 0xffffff80002d8383
Kernel Extensions in backtrace:
com.apple.iokit.IONetworkingFamily(2.0)[59A00F6B-3710-3E07-9921-70C45782FF8C]@0 xffffff7f8090e000->0xffffff7f80936fff
com.apple.iokit.IO80211Family(400.40)[78A58272-2170-3068-9C63-88301C99C406]@0xf fffff7f80e2c000->0xffffff7f80e63fff
dependency: com.apple.iokit.IONetworkingFamily(2.0)[59A00F6B-3710-3E07-9921-70C45782FF8C]@0 xffffff7f8090e000
com.apple.driver.AirPort.Atheros40(500.55.5)[01000ACB-C064-3F42-820F-BDE2008267 25]@0xffffff7f80e64000->0xffffff7f80fa3fff
dependency: com.apple.iokit.IOPCIFamily(2.6.5)[95ABB490-3AB5-3D5E-9C21-67089A9AE6A1]@0xffff ff7f80821000
dependency: com.apple.iokit.IO80211Family(400.40)[78A58272-2170-3068-9C63-88301C99C406]@0xf fffff7f80e2c000
dependency: com.apple.iokit.IONetworkingFamily(2.0)[59A00F6B-3710-3E07-9921-70C45782FF8C]@0 xffffff7f8090e000
BSD process name corresponding to current thread: MailTab for Gmai
Mac OS version:
11B26
Kernel version:
Darwin Kernel Version 11.1.0: Tue Jul 26 16:07:11 PDT 2011; root:xnu-1699.22.81~1/RELEASE_X86_64
Kernel UUID: D52AAB80-B2BC-3C6E-BBEA-78BD28064998
System model name: iMac11,2 (Mac-F2238AC8)
System uptime in nanoseconds: 2869233943350
last loaded kext at 367480732136: com.apple.iokit.IOAVBFamily 1.0.0d22 (addr 0xffffff7f8078d000, size 36864)
last unloaded kext at 437236879883: com.apple.iokit.IOAVBFamily 1.0.0d22 (addr 0xffffff7f8078d000, size 36864)
loaded kexts:
com.apple.driver.AppleHWSensor 1.9.4d0
com.apple.driver.AppleBluetoothMultitouch 66.3
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.24
com.apple.driver.AppleHDA 2.1.1f12
com.apple.driver.AGPM 100.12.40
com.apple.driver.AppleMikeyDriver 2.1.1f12
com.apple.kext.ATIFramebuffer 7.0.4
com.apple.ATIRadeonX2000 7.0.4
com.apple.driver.AudioAUUC 1.59
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.0
com.apple.driver.AirPort.Atheros40 500.55.5
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0b2
com.apple.driver.AppleLPC 1.5.1
com.apple.driver.AppleBacklight 170.1.9
com.apple.driver.AppleUSBCardReader 3.0.0
com.apple.driver.AppleIRController 309
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 32
com.apple.iokit.SCSITaskUserClient 3.0.0
com.apple.driver.AppleFWOHCI 4.8.6
com.apple.iokit.IOAHCIBlockStorage 2.0.0
com.apple.driver.AppleUSBHub 4.4.0
com.apple.driver.AppleEFINVRAM 1.5.0
com.apple.driver.AppleAHCIPort 2.1.8
com.apple.iokit.AppleBCM5701Ethernet 3.0.6b9
com.apple.driver.AppleACPIButtons 1.4
com.apple.driver.AppleUSBEHCI 4.4.0
com.apple.driver.AppleRTC 1.4
com.apple.driver.AppleHPET 1.6
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.4
com.apple.driver.AppleAPIC 1.5
com.apple.driver.AppleIntelCPUPowerManagementClient 166.0.0
com.apple.nke.applicationfirewall 3.0.30
com.apple.security.quarantine 1
com.apple.driver.AppleIntelCPUPowerManagement 166.0.0
com.apple.driver.AppleBluetoothHIDKeyboard 152.3
com.apple.driver.AppleHIDKeyboard 152.3
com.apple.driver.AppleMultitouchDriver 220.62
com.apple.driver.IOBluetoothHIDDriver 2.5f17
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.1.1f12
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.kext.ATI4600Controller 7.0.4
com.apple.kext.ATISupport 7.0.4
com.apple.iokit.IOSurface 80.0
com.apple.iokit.IOBluetoothSerialManager 2.5f17
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOFireWireIP 2.2.3
com.apple.iokit.IOAudioFamily 1.8.3fc11
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 2.1.1f12
com.apple.iokit.IOHDAFamily 2.1.1f12
com.apple.iokit.IO80211Family 400.40
com.apple.driver.AppleSMC 3.1.1d2
com.apple.driver.IOPlatformPluginFamily 4.7.0b2
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.3
com.apple.iokit.IONDRVSupport 2.3
com.apple.iokit.IOGraphicsFamily 2.3
com.apple.driver.BroadcomUSBBluetoothHCIController 2.5f17
com.apple.driver.AppleUSBBluetoothHCIController 2.5f17
com.apple.iokit.IOBluetoothFamily 2.5f17
com.apple.iokit.IOSCSIBlockCommandsDevice 3.0.0
com.apple.iokit.IOUSBMassStorageClass 3.0.0
com.apple.iokit.IOUSBHIDDriver 4.4.0
com.apple.driver.AppleUSBMergeNub 4.4.0
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.0.0
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.7
com.apple.driver.XsanFilter 403
com.apple.iokit.IOFireWireFamily 4.4.3
com.apple.iokit.IOAHCISerialATAPI 2.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.0.0
com.apple.iokit.IOUSBUserClient 4.4.0
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.iokit.IOEthernetAVBController 1.0.0d5
com.apple.iokit.IONetworkingFamily 2.0
com.apple.driver.AppleEFIRuntime 1.5.0
com.apple.iokit.IOHIDFamily 1.7.0
com.apple.iokit.IOUSBFamily 4.4.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 165
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 326
com.apple.iokit.IOStorageFamily 1.7
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.4
com.apple.iokit.IOPCIFamily 2.6.5
com.apple.iokit.IOACPIFamily 1.4
Model: iMac11,2, BootROM IM112.0057.B00, 2 processors, Intel Core i3, 3.06 GHz, 4 GB, SMC 1.64f5
Graphics: ATI Radeon HD 4670, ATI Radeon HD 4670, PCIe, 256 MB
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.55.4-P2P
Bluetooth: Version 2.5.0f17, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST3500418AS, 500.11 GB
Serial ATA Device: HL-DT-STDVDRW GA32N
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 4
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 3
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 5 -
I have only had my mac one month and it seems while I use Skype the screen freezes and I cant click on anything and everything on the right hand side of the screen shifts to the left and the left to the right with a back block down the centre and sometimes lines running down the screen over all. As it is almost brand new should I be going back to store to get this problem fixed??
Yes. You are still under warranty. Why waste it?
-
I cannot connect my iPhone 5 32GB IOS 6.02 to iTunes 11.01 on a Mac Book Pro. The screen freezes and doesn't recognize the iPhone at all. Thank you for your help.
Read here.
http://support.apple.com/kb/TS1591 -
When playing music on my ipad the screen freezes and i am not able to view album covers or make any changes i am only able to hear what i selected.
This is the third time it has happened since i updated to the new IOS 5.1. It never happened before.
If i go to Summary and restore the ipad to the factory settings then i'm able to run it as normal.
Is this a glitch in the new software,or a problem with my ipad?
Thanks for any helpThanks Russ H and Ross H!
I'm finding Multicam, combined with Compound Clips to be extrememly efficient.
I started with 2 different video clips, along with 2 different audio clips.
Layed out both clips side by side (visually, they are on top of each other on the timeline),and made that a single compound clip.
Then I laid out both audio clips on top of each other on the timeline and made those a compound clip.
So now I have
2 original individual Video shots
1 compound video shot of the 2 above side by side.
2 original audio tracks
1 compound audio track
Next I made a multicam track, and added to it all 3 video shots (2 original + 1 compound) And I added the compound audio track. I set that audio track to be "the" track.
It's just a little bit of setup, but really not that bad, and the ability to use the multicam feature to switch between shots, while keeping everything in sync is fantastic!
- Jack -
In Firefox 4, how do I change the order of plugins on the Add-ons Plugins manager page? I turn Shockwave Flash on only when I want to watch a video and then turn it off to prevent screen freezing, and so I want it to PUT it and KEEP it at the top of the list.
Hit Ctrl+0 (That's a zero, by the way). I'm not sure if it will work, but hey, that's the first thing I would try.
-
My screen freezes and popup message says I need to do a shutdown and then restart. It does it sometimes 2 times a day. Im new to apple and need help.
Bad or incompatible RAM is, more often then not, the cause of most Kernel Panics. It could also just need to be reset.
Here's the most used site for Resolving Kernel Panics. Please do all the steps in order, even if you don't think you need to do a certain step.
Here is a great MacFixIt article.
Good Luck!
DALE -
IPhone 6 screen freezes and can't find wifi after iOS 8.0.2 update
iPhone 6 screen freezes and can't find wifi after iOS 8.0.2 update. Have to do a hard reboot. I am Extremely disappointed and lost ALL trust in Apples Quality Assurance. From now on I'll wait a week before I update.
Hey there Shortos,
It sounds like your phone touchscreen is not consistently working for you after updating to iOS 8. I can see how that would be pretty frustrating. It sounds to me like this could be a software issue or an issue with the screen itself. I would start with the troubleshooting in the following article to help troubleshoot the screen itself:
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
Restart your device
Hold the On/Off button until "slide to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
If you can't restart your device, reset it by pressing and holding the Sleep/Wake button and the Home button at the same time for a least ten seconds, until the Apple logo appears.
Clean the screen with a soft, slightly damp, lint-free cloth.
Avoid using the device while wearing gloves, with wet hands, or immediately after applying hand lotion.
If you have a protective case, or if you are using a plastic sheet or film on the display, try removing them and testing the device without it.
If that does not resolve the issue, I would next quit all the running apps on the device:
iOS: Force an app to close
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the device and test the issue again:
iOS: Turning off and on (restarting) and resetting
Thank you for using Apple Support Communities.
All the very best,
Sterling -
Can't update to 10.2.8 as screen freezes and computer locks up when using Pref/view/update/10.2.8 100 meg combo update. I have to wipe disk and reinstall 10.2.0
I can't find a stand alone combo that works with 10.2.0 - indeed I can not find any update for 10.2.0. I do find discussions of the 10.2.1 and 10.2.2 updates, and once one has 10.2.2 there is a combo to get to 10.2.8.
What is the solution - by the way I like 10.2.0 better than prior 9.2.2, and do not mind having to wipe disk and lose 9.2.2. But my wavelan 16 bit wireless PCMIA card, indeed any airport card, no longer is recognized. Indeed I can't find Airport. This is a 10 year old computer and files/docs etc are long gone (but life was good until I decided to move to X this month). How do I correct this lack of wireless (it does connect directly to my Ethernet line so getting on the web is no problem)?Hello papau. Welcome to Apple Discussions.
You could try the 10.2.6 combo as that will install on 10.2
http://docs.info.apple.com/article.html?artnum=70174
and then 10.2.8 which requires 10.2.6 can be downloaded here.
http://www.apple.com/support/downloads/macosxupdate_.html
Run Repair Permissions in Disk Utility, found in Applications/Utilities/ before you start and once again when you finish.
During the installation process, just wait till the system completes things and not use any other applications until the update is finished. -
Gateway DX4840 is Experiencing Screen Freezing and Crashing
I am running Windows 7. This problem started about three weeks ago. Occasionally the screen freezes and nothing will unfreeze it except a cold boot. Control-Alt-Delete does nothing. Sometimes the screen goes black. At other times the screen shows
an odd multicolour pattern. Occasionally the computer crashes altogether.
I can not seem to find any hardware problem. Sometimes the computer will run for several days with no difficulty. There is no sign of a virus. I have checked my C drive for problems and found nothing.
I normally run Chrome and sometimes Chrome and Explorer at the same time. Has anybody experienced this problem.
Thanks very much.Hi,
Firstly, please check the issue with the method below:
Windows hangs or freezes
http://support.microsoft.com/kb/2681286
Meanwhile, I think you need also to check the hardware side; please ensure all the drivers are up-to-date and you can also contact Gateway support for help.
Thanks.
Nicholas Li
TechNet Community Support -
The update screen freezes and will not let me use the beta
Whenever I try and open the Beta, it tries to add my previous firefox extensions into the beta. The screen freezes and when I close it, I cannot open the beta again. I uninstall it and try again and the same thing happens. I tried restarting my computer and nothing happened.
Create a new profile exclusively for the 4.0 beta version and create a desktop shortcut with -P "profile" appended to the target to launch that profile.
* http://kb.mozillazine.org/Testing_pre-release_versions
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
Maybe you are looking for
-
Moving part of a catalog to network drive.
I need some good advice for a catalog of 13k+ photos that I'm trying to clean up. I'm using Elements 7, I have purchased Elements 11, and am planning to install it soon. Part of my photos are physically located on my hard drive, and part are on a net
-
Dynamically change send-to address of EmailSubmitButton
I'm modifying an access request form that we use. Depending on whether the request is for new access (for a new user) or a change to existing access, there may be more than one person who needs to receive the form. I need to know how to modify the Em
-
Post Install IP Phones tests document
Hi, Where is the IP phone Post Install Checklist doc? Rich
-
Question on scheduling prod job
Hi experts, I need help. Due to a technical reason, I can not schedule the process chain in prod. If I can give the program name to basis, they can be able to schedule the daily job. Is there any way I can get the program name(without the ability to
-
Pagination using pager tag library (logical groupings)
I'm currently trying to achieve pagination using the pager tag library provided by jsptags.com. Instead of the usual breaking up the records into a fix number to be displayed per page, I need to display these records by grouping per page. E.g., my re