MBP after motherboard replacement can't install anything

Hi guys,
I'll address to you an issue that a friend of mine has.
He recently replaced his motherboard (mbp 13").
This work was done not by apple but by a repair shop ( I know I know he didn't followed my advice lol)
The problem is this:
Can't install OS X not from his original CD (says that's not the right computer) not from a drive, pen etc.
Folders can't be moved (permissions issues)
can't save anything on the HD or update or install software.
I've tried my best to help him.
Seem to me that somehow even if the motherboard is the right one (same model) doesn't "see" him anymore as the owner.
Tried to reset NVRAM etc but nothing has changed.
Some of you might have some similar experience or advice?
thanks

Did you fix it? I am dealing with the same problem now!

Similar Messages

Installation problems: can't install anything after failed install.

I believe this may have been posted before, but I have a different OS than in the question I read so I thought I should ask again.
I have a Macbook Pro running OS X Lion (late 2011) and a while ago I was dumb and decided to install old Cubase LE 4 software onto my brand new Macbook. The installation stalled with "less than one minute remaining", I force quit, tried several more times, and ever since then I can't install anything else. I heard of some hotfix that can remedy this problem, but since I have the new OS I was wondering if that would still work.
Any suggestions/answers are greatly appreciated.
Bill

I believe this may have been posted before, but I have a different OS than in the question I read so I thought I should ask again.
I have a Macbook Pro running OS X Lion (late 2011) and a while ago I was dumb and decided to install old Cubase LE 4 software onto my brand new Macbook. The installation stalled with "less than one minute remaining", I force quit, tried several more times, and ever since then I can't install anything else. I heard of some hotfix that can remedy this problem, but since I have the new OS I was wondering if that would still work.
Any suggestions/answers are greatly appreciated.
Bill

Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player. Does anyone know how to get around this?

Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player. Does anyone know how to get around this? I don't know how to wipe the hard drive, and the support online doesn't seem to work.

As posted previously:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
If installing Leopard the process is similar in some respects. If you wish to begin anew then after selecting the target disk click on the Options button and select the Erase and Install option then click on the OK button. To install over an existing system do the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Can't install anything downloaded from Web

I have a 17-inch MacBook Pro running 10.7.5.
I've noticed recently that I can't install anything that is downloaded over the Internet. Flash and Microsoft Office are two of the recent upgrades that won't run. There have been others.
I'll download the upgrade/update and the automatic process will begin. After I enter my username and password, I'll point to the correct disk image (Macintosh HD) and click the Install button. I'll then be taken back to the step where I point to the correct disk image.
I have a Bootcamp partition running Windows 7 and have no trouble running upgrades/updates.
Any ideas? Thanks.

This got worse before it got better. Eventually I couldn't log into my account. I reinstalled Lion and the restored from a Time Machine backup. And I still couldn't log in.
I then did one more password change and finally got into my account. But I could not access Keychain, and I really think that somehow my Keychain password somehow got changed from what my account password was.
I started a new Keychain and all is working now. Of course, I lost all my saved passwords but I have most saved.
Thanks.

I can not install anything in appstore

i can not install anything in app store. the icone show and write watting. just it. i have a great wifi. i do not know why. i get crazy.

go to settings- general- reset- reset all settings

The installation program is not working so I can't install anything. What do I do?

The installation program is not working, it won't start and I have to quit by forcem so I can't install anything. What do I do?

Hi Caroline,
http://reviews.cnet.com/8301-13727_7-20087723-263/how-to-run-the-password-reset- utility-in-os-x-10.7-lion/
http://osxdaily.com/2011/09/19/change-password-mac-os-x-10-7-lion-without-knowin g-current-password/

HT1338 I had downloaded d iOS 6.1.3 software bt after downloading I can't install into my iPhone

I had downloaded d iOS 6.1.3 bt after downloading I can't install into my iPhone

This is the procedure for updating iOS, which can be done on the device, or through iTunes.
http://support.apple.com/kb/ht4623
There should not be a step where you download the update separately.
If you are referring the downloading as an automatic part of the overall process, can you explain the failure in more detail?

I CAN-NOT install anything from a .pkg

i CAN-NOT install anything from a .pkg
i need help
someone
when i try to install i get this at the end
"there were errors installing the software"
"please try installing again"
also in disk utility
i get this
"invalid file or directory ID found"
"the volume HD needs to be repaired"
"Error: the underlying task reported failure onn exit"
and when i try to repair it from the MAC OSX disk i cant
i get
"Error: the underlying task reported failure onn exit"
also i cant install the BSD as it is a .pkg
HELP
Mac mini Mac OS X (10.4.5)

Hi, shoaib.
You wrote: "also in disk utility i get this
"invalid file or directory ID found"
"the volume HD needs to be repaired"
"Error: the underlying task reported failure onn exit""The disk directory of your hard drive is corrupted. This is the source of your problems.
If you cannot afford either of the third-party utilities:
• Alsoft Disk Warrior 3.x (DW3)
• Micromat TechTool Pro version 4.1.x (TTP4).
then you will need to follow the instructions in "Disk Utility reports 'Underlying task reported failure' when repairing a volume."
Specifically, given that your attempt to repair the disk using Disk Utility from your Tiger DVD failed, there are no other solutions available for this problem other than:
• Attempting repair with the third-party disk utilities cited above.
• Backing up whatever data can be saved, then reinstalling Mac OS X with an Erase and Install.
See the article I cited above for details. Sorry to be the bearer of bad news.
To avoid having to reinstall in situations like this, as funds permit you should consider investing in:
• Implementing a comprehensive backup and recovery solution. For advice on the backup and recovery solution I employ, see my "Backup and Recovery" FAQ.
• Alsoft DiskWarrior and TechTool Pro.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

I can't install anything on MacBook Pro - can anyone help?

Dear All,
I can't install anything on my MacBook Pro (OS X 10.6.8). For example, I'll download an update, which in turn opens an installer window. I select the destination for the installation. So far so good. But when I click on 'install', nothing... Absolutely nothing happens.
I've been into disk utility to fix the permissions - there seemed to be quite a lot to fix. Then I repaired them. But running another check on disk permissions throws up the same errors, even though the first time round they were apparently fixed.
I've had a look in some of the the forums; one option seems to be to reboot from the installation DVD. Unfortunately, as I'm out of the country at the moment, the disk, along with most of my worldly possessions, is in storage hundreds of miles away and completely inaccessible.
Can anybody help a) with working out what the problem might be and b) with suggestions as to what on earth I can do to fix it?
Thanks so much to you all for your help,
h

10.6.3: Can't install anything?!

Hi - still getting used to my Mac which I recently inherited. Using the original disks I have erased the disk and reintalled Mac OS X 10.5.8. Installed 10.2.2 iTunes, no problem. Tried to join the Apple Dev program, said I needed to upgrade the OS. Nipped off to Apple, purchased upgrade to 10.6.3, made sure I had the latest updates then installed the upgrade - no problem. But then couldn't install anything else.
Again I took the drive back to nothing, built it back up, making sure I got the latest updates before upgrading to 10.6.3. Same problem. I've even tried installing the recommended combo update to 10.6.7. It fails.
ERROR LOG FOR 10.6.7
24/05/2011 18:59:39          Software Update[10722]          PKG: extracting "com.apple.pkg.update.subasesystem.10.6.7.combo"
Error Domain=PKInstallErrorDomain Code=110 UserInfo=0x117bb2760 "An error occurred while extracting files from the package “SUBaseSystemCombo10.6.7.pkg”." Underlying Error=(Error Domain=BOMCopierFatalError Code=22 UserInfo=0x11795b570 "The operation couldn’t be completed. FinishStreamCompressorQueue error") {
    NSFilePath = "/var/folders/zz/zzzivhrRnAmviuee+++++++++++/-Tmp-/PKInstallSandbox-tmp/Root";
    NSLocalizedDescription = "An error occurred while extracting files from the package \U201cSUBaseSystemCombo10.6.7.pkg\U201d.";
    NSURL = "SUBaseSystemCombo10.6.7.pkg -- file://localhost/Library/Updates/zzz061-9523/061-9523.English.dist";
    NSUnderlyingError = "Error Domain=BOMCopierFatalError Code=22 UserInfo=0x11795b570 \"The operation couldn\U2019t be completed. FinishStreamCompressorQueue error\"";
    PKInstallPackageIdentifier = "com.apple.pkg.update.subasesystem.10.6.7.combo";
com.apple.message.uuid: 1D0A5BAA-5B8E-4936-9C33-84E27C2860C6
com.apple.message.domain: com.apple.PackageKit.install.package.extract
com.apple.message.signature: FAILURE: com.apple.pkg.update.subasesystem.10.6.7.combo
com.apple.message.result: failure
com.apple.message.value: 24.13961
com.apple.message.signature2: 1.0.1.1249367152
I have run disk verify - all OK, have read/write permissions and have repaired permissions. The only issue I might have: following the POST chime I very occassionally get three repeating beeps which I understand could be a memory related issue??? Could there then be an underlying hardware issue that is affecting the software side of things? Everything that I have installed seems to work OK, I just can't install anything new.
Any ideas? Advice greatly appreciated.

Snow Leopard Boot Camp support FAQ -
http://www.apple.com/support/bootcamp/
http://support.apple.com/kb/HT3777

Premiere Pro CS5.5.2 will not install after motherboard replacement ?

Premiere Pro CS5.5.2 will not install after mothboard replacement .It was running correctly for 4 weeks prior to replacement due to AC connection issues and Wireless connectivity.
Adobe Case No. 183519673, Adobe Technicians (Asia/Pacific) have worked on this issue for over 3 hours with no results after uninstalling and reinstalling.
Any ideas to fix issue wou;ld be appreciated.

Also posted to the Hardware section http://forums.adobe.com/message/4634472
There is a New forum for Download & Install & Setup problems
http://forums.adobe.com/community/download_install_setup
Or, call Adobe
In the US - Adobe Install Problems 800-642-3623
In the US - Adobe Activation 866-772-3623 Open 24/7
I suggested providing motherboard brand/model information
[Additional information from other topic added]

Installation problem; can't install anything after failed install

Hi everybody,
I have just changed computer and I tried to instal Cubase LE4 on my new macbook air running on OS X Mavericks (10.9.2).
I have encouter similar problems of others that tried the same operation on SL years ago, namely: when the installation started, it went well, but in the end it will say 'install time remaining; about a minute'. No matter how long I leave it (literally hours), the loading bar won't move an inch, even though it looks like it's loading.
Now I have to force quit to get rid of the screen.
However every time I try to install something else the problem is still there. The installer tells application says: "Waiting for other installetion to complete".
I can't install any other program.
Here's the link to the old post:
https://discussions.apple.com/message/10179535#10179535
The solution proposed on that post do not work for me unfortunately. I was wondering if anybody has some new solutions.
Thanks
Geremia

Hi everybody,
I have just changed computer and I tried to instal Cubase LE4 on my new macbook air running on OS X Mavericks (10.9.2).
I have encouter similar problems of others that tried the same operation on SL years ago, namely: when the installation started, it went well, but in the end it will say 'install time remaining; about a minute'. No matter how long I leave it (literally hours), the loading bar won't move an inch, even though it looks like it's loading.
Now I have to force quit to get rid of the screen.
However every time I try to install something else the problem is still there. The installer tells application says: "Waiting for other installetion to complete".
I can't install any other program.
Here's the link to the old post:
https://discussions.apple.com/message/10179535#10179535
The solution proposed on that post do not work for me unfortunately. I was wondering if anybody has some new solutions.
Thanks
Geremia

Problems after motherboard replacement

Hello,
My PXI system consists of PXI-1045, PXI-8360 and five NI PXI intruments (5152, 4065, 6552, 2532, 5404). I was working with this system without problems for a long time. However, the motherboard of my PC had a specific problem with the ethernet connenction and I decided to replace the motherboard with a new one (same model). After the replacement (the pc finally was fully functional), I tried to power on the PXI chassis, but I couldn't "see" any module in PXI chassism, using
the MAX. I must tell thatI didn't change the hard disk of the pc, or anything else just the motherboard.After some experiments, I finally fix the probrem with the following solution: First I unplugged all the modules from PXI chassis. After that, I plugged one module and I reboot the pc. After that I plugged the second one module and I reboot the pc. And so on...
This was the only solution that I found in order to indentify all the modules of the PXI chassis.
My question is why happend this thing? Where are the PXI modules' adresses stored? Also, is the procedure I used correct, or I had to do something else in order to make the system work?

Hello George,
you might want to consider posting this question in a more hardware based forum - the problem does not seem to be related to CVI.
Good luck

5800 really slow after v40 plus can't install apps

Greetings fellow chaps. I updated my 5800 just yesterday to v40 and after that ican't install anything. When I try to install an app I receive an error message saying "Cannot install,Installation application already running"(roughly translated from Greek).Moreover the menus tend to be quite slow I'd say.
I've tried the *#7370# or whatever that was soft reset and still nothing's changed for the good. Any feedback would be helpful. Aye thanks for your time, bye bye.
Push it to the limit

we discussed that 1000000000 times
watch this:
http://www.youtube.com/watch?v=NqZqwfaKj1o
-you can show appreciation to my posts if it helped or useful by pressing the green Kudo star beside my post that hepled
-if my answer was the solution , so click accept as solution button
Started From Nokia 3310 , Now with Nokia N97 v.22.0.110 + N900 PR1.2

Can't install ANYTHING on my Nokia E71

I've trawled through every single online help forum and can't find anything that helps!
No matter what I try to install, I continually get 'unable to install'. This only started happening after I updated my software!
I've reformatted twice,
I've rebooted,
I've done all the usual stuff, all my certificate thingies are off etc but still nothing!!!!
What do I do!?

I have the solution for mine, I have typed
*#7370# and call and the phone will reboot
First I have deleted the memory card
I can install again now.
Maybe it's the same thing with your model, or another number to type.
I am french, I write not english very well.
Or try like somebody says here :
http://www.forummobiles.com/topic/229292-e63-ninstalle-plus-les-applications-et-se-bloque/
key ON/OFF to turn off then press on * 3 and green key
but for me the first solution was good
I read the problem has 2 months, I hope she has found the solution since june. That will be useful for others.

MBP after motherboard replacement can't install anything

Similar Messages

Maybe you are looking for